Polygonal Lasso in CS5 tool does not
Yes, I have a strange question that I need help with I just got my daughter Photoshop CS5 because that is all I could afford it and when she tried to use the Polygonal Lasso tool would not choose anything she has Windows 8, but I doubt than that cuase no problem I tried to catch me, but the lasso would simply not stick or make all lines at all kept endangered and dissappearing a sec after the appearance of the line is their a way to fix this?
Without accurate information on the system, we don't really know, but as a first step, you might want to disable OpenGL in the prefs of PS. Also, make sure your graphics card driver and any input devices and their drivers...
Mylenium
Tags: Photoshop
Similar Questions
-
to refine my question. The Lasso tool does not work. When I select the content aware lasso shrinks and nothing changes. Help please.
A simple reset will often be the case if a tool becomes awkward. Go to this link, then select the lasso tool:
-
Photoshop CS5 move tool does not?
Help, please. I use Photoshop CS5, and my move tool does not work. I don't know what to do. I do photo with a plug-in software, 'Album DS' albums, and for the last two months, everything worked perfectly. Then, all of a sudden, when I load pictures on a page of the album, with the move tool, I have more get the brands of culture around the photos to enlarge them, reduce or even move the photos. I tried to use the move without the software tool and it still does not work.
Look at the options bar to the move tool - you turned off the option "view orders of transformation."
-
[(Windows XP) looking for a cure to issue:]
["Add Remove Programs tool does not open, cannot access area Add Remove programs on the control panel."](After typing regsvr32 mshtml.dll then press Enter :)met the following error message:"mshtml.dll was loaded, but DllRegisterServer entry point was not found.This file cannot be saved. »How can I fix above error message?-Alan.Hi Alan,
· Did you do changes on the computer before the show?
· Are you referring to an article in Microsoft?
Follow these methods.
Method 1: Follow the following steps:
(a) click on Start, run, type cmd and press enter.
(b) in the command prompt, run these commands:
regsvr32 Jscript.dll
regsvr32 Msi.dll
regsvr32 Oledb32.dll.
regsvr32 Msado15.dll.
regsvr32 Mshtmled.dll
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 3: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
The cutting tool does not work after windows updates.
I read answers to similar questions about the failure of the cutting tool. I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware. It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work. I don't have to go through hoops of restorations etc to get something it seems work was broken by updates. I'm about to go to a Mac.
It worked for me! Thank you!
-
Unable to turn on the window Defender, even after that I click on activate the defender of the window on my window vista home premium... The page with the tool does not appear...
If you have
one of the following AV, antivirus, programs installed, it will stop your
Windows Defender. Purpose of these AVs have their own advocates. 2 defenders
on the same machine will create conflicts.
Bottom line: it's ok.
It's normal.
List of AVs which will stop Windows DefenderNorton
McAfee
AVG
Microsoft Security
EssentialsIf you do not have the
above AV programs, here's how to do to restart Windows Defender:Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
topic status , it must be said... Has begun
under Startup Type, it must be said... Automatic
If it does not say that, right click on Windows
Defender > click Properties > to
Startup type, click on the pointer to the right and select automatic
to the service status, click Start
Click OK when finished. -
Print screen with Snipping Tool does not.
Print screen or capture tool work. They worked very well in the past, but now neither one works. Back to zero does not solve the problem.
Screenshot doesn't seem to do anything in the copy buffer because even if the block occurs, nothing sticks in.
Snipping Tool just shows a black with a red around him border screen, instead of the actual screen shot (no matter the option I select IE free Style or whole screen, etc.), I have Vista Home Premium with all service packs.
Thank you
This should be the final resolution to my problem of Snipping Tool/print screen:
1. I downloaded and ran the Malwarebytes program as recommended. And BTW, I don't see this recommendation here. I'm fairly new participant in Forums, so maybe there's a reason that I see here this recommendation I don't know. The Malwarebytes has really done his job and even if I run MS Essentials program found Malwarebytes 25 hits of Mal-ware on this PC. Once I have it fixes these problems, the symptoms of my problem of Snipping Tools became less consistent.
If Malwarebytes fixed part of the problem with the Snipping incroyables.* *.
2 but the final resolution is that it turns out that there is that one Internet site where the tool captures will not work and it is my Bank. I know that my Bank suggested I run a program called safety report. It's my theory that is my bank site or report has something programmed into it that prevents screen either with the tool to capture and print screen captures. If I go into my bank site with Internet Explorer or Mozilla Firefox, the Snipping Tool will not work. However, the Snipping Tool works everywhere else. It's all the other websites and in other programs.
The Snipping Tool does not work on my banking site (probably because of the REPORT) and maybe it will not work on other sites closely to secure *.
Thank you very much for the help.
-
Problem of the eclipse - signing tool does not
Hello
The Signature tool does not load in my copy of eclipse. I'm running the beta version 7 in Eclipse Helios. When I select 'sign with Signature tool... ". "in the menu, nothing happens. The only chance I have is to try to 'All together', but that works only intermittently.
Any ideas?
Thank you
I had the same problem: you need to select your project in the Project Explorer, and then right-click, select Blackberry--> sign with signature tool...
-
The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon. However if I select snipping tool in the menu start nothing happens at all.
Original legislative:
M.
Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
-
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
-
Moderator Forum Keith has a few suggestions along this line to
-
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
-
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.
-
Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
`
When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.
-
I hope this helps. Good luck.
-
Hi I have PSCC and move the tool does not move object.
A square dotted is displayed when the mouse is pressed but disappears when publishing.
Anyone who knows?
Thank you
Mikael
Okay, looks like the automatic selection is enabled. Look in the top toolbar and uncheck the automatic selection.
-
Align the tool does not align?
Interesting title good haha. Basically, I had problems recently while using the Repeater. I am trying to create this effect, where you have different forms and other things to appear and disappear. But, when I come to align these forms to the center of the model, in fact all this moves to the right, aligning any. Here is a video to show you exactly what I mean: Dropbox - After Effects Finn.mp4 Repeater problem
Thanks for any help!
The align tool does not see the items generated, because they are not real paths. There is nothing wrong or unusual here. Form operatirs wirk on rendering / pixelation level, they may not generate paths. You must align things manually.
Mylenium
-
License repair tool does not work.
License repair tool does not (windows 8.1):
It is said python25.dll is absent, but does not lack.
I deleted the download and tried again. The same problem.
Any ideas please?
Please note that this license repair tool is not valid for the latest versions of Acrobat. It became obsolete after Acrobat 9.
Thank you
Rahul
-
The red eye tool does not present as an option under the Clone Stamp tool. How can I access it?
What version of photoshop are you?
The red eye tool should be in the same location as the healing brush and Patch tools.
-
My "move" tool does not work as usual.
My move tool does not work as usual.
After pasting an image into a new model, it is impossible to move around, to position the image on a desirable location. The photo is back in the middle of the model as soon as I leave the mouse.
This is a silly question, I know... I'm sure that some button is locked or not well placed, but I can't find the solution.
It would be great if someone could give me a clue...
Thanks in advance,
Bottom
-
Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.
Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.
Download the following messages: Exit Code: 7 please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW036, DW066...
-0 fatal Error (s), 82 (s), 124 warning (s)
Any idea?
Thank you
Jaap
Do you have other Adobe applications installed on your computer?
Navigate to C: > Program Files > Adobe.
Open the Adobe folder and check if the Adobe Premiere pro CS5 folder is created with files stay inside?
Let us know.
As System File Checker run command once and see if \any system files are corrupt. As you had upgraded to Windows 10 we will check the system files once. Later we can try to provide full permissions for the required records.
Maybe you are looking for
-
iPhone lost and stolen then weird SMS of "Apple".
I'm an IT company, a user recently lost his iPhone on a taxi and no chance to recover. He had access find my iPhone to track down but cannot locate, so he issued remote wipe, and he did. We keep the unit not taken off the list. However, he received a
-
Satellite L300 - error recovery disc creator - disk is scratced or dirty
Hi all I tried to create recovery disks for my L300, but after a 1-2 minutes, the program stops and says: 'Please check if the disc is scratced or dirty, if so, try again with a new disc' error code 0E01B5-26-2A030C00. I tried this many times with ma
-
When can I expect to see drivers for windows 8 for my dv7-4179nr notebook pc?
It would be nice if my computer worked correctly. HP seems to be pressing for everyone to move up to Win8, so it's quite disappointing that drivers necessary for an optimal experience is not yet available. Please advise when these will be available t
-
Pop - up on scan HP 6520: select the program to launch for this action
One then I get two options: Put A highlight: scan from HP and: muvee auto producer 6.1 (I don't know where it comes from. This isn't my PC). What I want to do is have this pop-upand have instead the HP Scan scan runs automatically. Don't see how to d
-
Certificate issues when I try to use Remote Desktop connection
original title: certificate problems I recently followed a remote office to an invalid certificate problem. The certificate indicates it of from Microsoft, but something shows it as being invalid and so I can't use it to 'renew or update the current