Poor performance using lightroom 5 when multitasking

Similar Questions

• Why do I need internet access to use lightroom?

  Why do I need internet access to use lightroom? When I go to a lot of photos and want to do captive capture with my laptop, creative cloud wonder for internet access / wireless, which i do not always have and therefore cannot use the application.

  Thank God I have an older version of lightroom on my computer, or else I would be screwed and embarrassed in front of the customer.

  can someone help me with this?

  You can use the CC without connecting to the internet for up to 90 days unless you have some jobs as send photos to your clients or to others.

  Connect to Adobe CC at least once within 90 days is required to keep the active CC.

  Concerning

  Stéphane

• Question about using Lightroom for the second time.

  I used Lightroom 1 when it came out but stopped using it for a period of time. I deleted all preferences and the app. All photo in Lightroom folders were also deleted after that I moved the images. I had to reinstall Mac OS x, so I cleaned my HD and reinstalled. So I had a clean slate.

  
  

  In any case, I reinstalled Lightroom 1 so I could buy the upgrade of LR 2. Then I installed 2 LR. But what I don't understand is... my nameplate, preferences and other little things that I had set up in Lightroom 1 returned when I open Lightroom 2. Does anyone know how this is even possible, given what I mentioned above? No matter what help understand this would be greatly appreciated because I want to have a completely fresh start. Thank you.

  Jbshanks1

  As well as preferences, look in Application Support / Adobe/Lightroom.

  John

• I got lightroom 6 is installed on my laptop. He beat and went to repair. When it is returned when I tried to use lightroom, it said that I had already installed on two computers. I have uninstall lightroom 6 on my laptop, but when I reinstalled the messag

  I got lightroom 6 is installed on my laptop. He beat and went to repair. When it is returned when I tried to use lightroom, it said that I had already installed on two computers. I have uninstall lightroom 6 on my laptop but when I reinstalled the message that I have two computers is still there. I need help. I don't understand what is happening because it's the same laptop that I installed in the first place. Help, please.

  If she had a major equipment change (as a replacement of hd), it resembles another computer.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help", https://helpx.adobe.com/contact.html , and request activation reset account.

• How can I use lightroom or photoshop on my laptop, when I open it, it says only, I use on two computers and I have already two I have Mac at home.

  How can I use lightroom or photoshop on my laptop, when I open it, it says only, I use on two computers and I have already two I have Mac at home.

  Hi moving,

  You can use Lightroom or Photoshop on two computers using a single license.

  If you want to use on the third computer, you should disable any previous machines and turn it then back on the 3rd machine.

  You can also consider getting another license or subscription to your other computer.

  ~ UL

• last buy and pay creative photography plan cloud. When I open lightroom I get a warning message indicating that Lightroom will open with reduced functionality, you get a subscription to continue using lightroom. But I already bought! I do not k

  last buy and pay creative photography plan cloud. When I open lightroom I get a warning message indicating that Lightroom will open with reduced functionality, you get a subscription to continue using lightroom. But I already bought! I don't know what to do! In his time, that was my trial, which appears as outdated... Can someone help me? Thank you!

  Please see:

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  It would be a good idea to also check your system against the minimum requirements:

  FAQ: What are the system requirements for the desktop creative cloud application and every creative application of Cloud?

• I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works

  I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?

  Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.

• Hello!, my name is jan and I use lightroom 2 for many years. I have an original installation disk with a 24-digit serial number. I have never installed lightroom problems wih. suddenly lightroom won't start when I try an image I tak

  Hello!, my name is jan and I use lightroom 2 for many years. I have an original installation disk with a 24-digit serial number. I have never installed lightroom problems wih. Suddenly, lightroom will not start when I try an image that I have taken with my nikon D500 and transferred to WINDOWS 8.1.  I tried to re - install lightroom: the application procedure serieal number, but refused to accept the number that has always worked. Help, please!  Jan

  If you are certain that you have the correct number of series, there are really not much that we can help you here. You can try to download and install the latest version of Lightroom 2. This will be the trial version, but when the trial screen there is an option to indicate that you have a serial number. Either way, Lightroom serial numbers start with the four first digits being 1160.

  Adobe - Lightroom: for Windows: Adobe Photoshop Lightroom 2.7 - English, French, German

• I use Lightroom 5.7, 64-bit with Windows 7 Professional. Without apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now, I've noticed that my directory the files LR

  I use Lightroom 5.7, 64-bit with Windows 7 Professional. Without apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now, I noticed that my repertoire records in library view LR does not show images correctly: If there is a folder with subfolders, the folder contains 0 images, but sub records show the correct number of images. What happened and is there a solution? I tried to uninstall Lightroom and re - install, but the problem persists.

  Here is a screenshot of the error message:

  

  Post edited by: Joseph Costanza, Jr.

  See here for a solution.

• use lightroom 5.7.1 does not all meta-information are copied when exporting images

  use lightroom 5.7.1 not all meta-information are copied when exporting images: City and country are not copied, even if this information is displayed when I open the original file in photoshop. If I export this file through lightroom, the information disappears.

  Anyone know how to fix this?

  In the export dialog box, go to the metadata section and make sure that you have disabled "remove location information.

• How to make the menu letters more when you use Lightroom 4?

  How to make the menu letters more when you use Lightroom 4?

  Hey Lenovo W510,.

  The police of interface only option in Lightroom of sizing is in the preferences > Interface > panels > Font Size (Small/Large)

  The configuration in grand and then restarting Lightroom will increase the fonts you see in the signs that describe the functions of LR.

  If you're on Mac or Windows you might also decrease your screen/display resolution that will make everything look bigger on your screen.

  Hope this helps,

  Kind regards

  Pete

• Using Lightroom 4 RAM

  I have some performance issues with Lightroom 4. I admit my PC is not super fast, but t looks as if the available RAM is insufficient... looks like only a quarter of the available... any ideas what I should do to improve performance. It leads to problems when you export images - sometimes it works, sometimes it - normally I can't close Lightroom and reopen it - it works normally then. He is usually very few opened on the other at the same time

  Lightroom version: 4.0 [814577]
  Operating system: Windows 7 Edition Home Premium
  Version: 6.1 [7601]
  Application architecture: x 86
  System architecture: x 86
  Physical processor count: 4
  Processor speed: 2.3 GHz
  Built-in memory: 3325,9 MB
  Real memory for Lightroom: 716.8 MB
  Real memory used by Lightroom: 897,9 MB (125.2%)
  Virtual memory used by Lightroom: 1073,4 MB
  Memory cache size: 4.0 MB
  System DPI setting: 120 DPI
  Composition of the Bureau enabled: Yes
  Exhibition: 1) 2560 x 1600

  After struggling with poor performance for some time, I discovered a few tips on another post dealing with:

  -Negative cachinghttp://http://photocamel.com/forum/computers-software/162752-help-lightroom-4-1-slow-perfo upe - problems.html- http://forums.adobe.com/message/4535489#4535489

  -Preferences file corrupted - problems.html http://photocamel.com/forum/computers-software/162752-help-lightroom-4-1-slow-performance-

  It seems that Lightroom 4.1 works now much, much better - and I'm still running a 32 bit OS

• HP Mini 110-3530NR extremely poor performance on the Internet

  My HP Mini 110-3530NR Netbook has very poor performance on the Internet.  I use Windows 7 Starter.

  Say hello to new coppens1.  I apologize for the delay in my responses.  I have not received the normal e-mail notifications.

  When I had to go to msconfig earlier in our interactions you make sure that the Synaptics driver load with Windows?  Follow these steps to check.

  1. Click Start, type "msconfig" and press ENTER.
  2. Go to the Services tab and search for "HP Software Framework".  This should load with Windows for a lot of the HP software to work properly.
  3. Then go to the Startup tab and make sure that anything it either by "Synaptic" is loaded with Windows.
  4. Save your changes and exit msconfig.
  5. Then go to your touchpad settings and, even once, make sure that the settings are correct.
  6. Finally, restart the machine and make sure it works properly.

  I totally understand if you want to open a new thread as this covered a few topics!  Just make sure to send me a private message with the link so that I can make sure to help you here.

  I wish you a beautiful day JC!

• SG300 switches have poor performance in layer 3?

  We have several switches SG300 Serices. We use them to route traffic to VLAN remote offices, the Internet connections and wireless access Points.

  In a remote office, we have a SG300-10 facility to route the HQ network and the remote office subnet. The SG300 is connected to the seat through fiber and contains several VLAN Tag. If I speed, tests on the fiber of the entrants Netwotk tag link I get decent performance, 80Mbs. If I switch to a networtk who is not priginating of the central administration and road SG300-10 package, I get poor performance. 15 - 20Mbs.

  I have Fireded until a new FW SG300 - 28 p v1.2.7.76. Added a HQ VLAN 101 and VLAN new, 1025. Mapped some Tagged and not marked for each ports.  Switch has been connected to the network of HQ as untagged VLAN 101.  I put a laptop on a unmarked port VLAN 101. Ran some tests, cam is back with 750-850Mbs. great.  Put the same computer laptop on a Port of 101 tag, set the NETWORK card for tag VLAN 101, same test, same speed, 750-850Mbs.

  I configured then laptop for tag VLAN 1025. Connected to the port 1025 VLAN scored. Done speed tests, the results were 15-20Mbs!

  Then I configured laptop for Untagged VLAN 1025. Connected to unagged port 1025 VLAN. Done speed tests, the results were 15-20Mbs!

  It was only the laptop and connect to the net on the SG300 - 28 p P.C. Why this device's performance is so poor when he needs to route?

  Other switches have v1.0.0.27 FW or FW v1.1.2.0. They have similar speed problems. All configured for layer 3.

  Thank you!

  Scott<>

  How are customer gateways and server configured?

  The default gateway for connecting devices should probably be that of the IVS, they are directly connected to. So if you have a server connecting to a SVI 192.168.1.100 then the gateway server should be 192.168.1.100, not a router upstream. Who can create a loop of road if the return circulation.

  -Tom
  Please mark replied messages useful

• VPN poor Performance - Cisco RV220W and routers WRVS4400N

  Hello

  To one of our customer IPSec VPN is established between Cisco RV 220W and routers of Cisco WRVS4400N.

  Router VPN /ISP details are as below

  Location was	Location B
  Details of the Internet ---------------------- DOWNLOAD: 6 to 10 Mbps Upload: 1 to 2 Mbps Details of router ---------------------- Cisco RV220W Firmware: 1.0.3.5 IKE policy Encryption: 3DES Authentication: MD5 Group: Group 2 Life key: 28800 sec VPN strategy Encryption: 3DES Authentication: SHA - 1 Group: 1024 bits (Group 2) Life key: 3 600 s Perfect Forward Secrecy: enabled	Details of the Internet ------------------------- DOWNLOAD: 1.35 Mbps Upload: 1.24 Mbps Details of router ---------------------- Cisco WRVS4400N Firmware version: V2.0.1.3 Phase 1 Encryption: 3DES Authentication: MD5 Group: 1024 bits (Group 2) Life key: 28800 sec Phase 2 Encryption: 3DES Authentication: SHA - 1 Group: 1024 bits (Group 2) Life key: 3 600 s Perfect Forward Secrecy: enabled

  From the day that VPN has been implemented, the performance was poor. Frequent disconnections sessions live to the VPN nodes and very low transfer rate was alarming to users.

  The servers in A location and users to the site B gets authenticated at the server DC level in A location

  Applications of Terminal Server remote as Quickbooks, QQ Evolution, attendance RX serve also the location has by users to the location B

  The login is your time and all applications are extremely slow.

  I tried to copy files between share data between two locations and the results are as follows

  Location A to location B-> 130 Kbps 140 Kbps

  Location location B A-> 150 Kbps to 160 Kbps

  What can be the problem for these poor performance VPN?

  -Change the encryption for the least secure OF THE /MD5 would have a significant impact because it can reduce the overload on the routers?

  -Even if both routers are routers SMB, it has really good VPN flow according to the data sheets. I couldn't find VPN flow mentioned in the WRVS4400N data sheet. One of the sons of CSC, I also noticed the VPN of WRVS4400N flow seemed really low as only about 1.6Mbps. (https://supportforums.cisco.com/thread/2107881)  Whereas RV220W router has VPN 90Mbps flow, according to the datasheet.

  So, what can be the cause of the problem and what can be fixes possible?

  Help, please!

  ANUP sisi

  Beginner to router Cisco VPN, please help

  RVS4000 was designed to work in a small office. It supports 5 VPN tunnels with a maxium of 2 Mbps flow measured in a laboratory environment. It has a processor that has a motor integrated IPS, who would deliver 20 Mbps LAN - WAN throughput when IPS is enabled.

  RV220W has been designed to operate in a slightly larger office with 25 IPsec VPN tunnels. It has a processor that has a built-in cryptographic engine able to deliver throughput 90 Mbps of IPsec. RV220W also supports 5 SSL VPN tunnels that can be used by employees and business partners for remote access.