Pop at the end of audio rendering

Similar Questions

• Slides of questionnaire will not move forward before the end of audio track

  Hi, I have a quiz at the end of my course that has a voiceover reading the questions and answers. However, if a person is able to read and respond to the question before the audio track is made, I wish they were able to continue on. Instead, each slide remains until the audio track ends. I looked around a few obvious answer to this with no luck. Can anyone help?

  Slide audio, do you need CC?

  What is the action of success? With Infinite attempts you have not a failed action. Set success action to 'Go ├a next page' instead of continue.

• Detect the end of audio track.

  I can't find anything that let me known when the audio track that I started using mmr_play() is complete.  I tried asking events using the following.

      audiodevice_request_events( 0 );
      audiomixer_request_events( 0 );
  

  I get an event of each when the application starts and then nothing after that.  The audio peripheral event looked promising, but there's no docs onAUDIODEVICE_INFO.  Here are the docs:

  AUDIODEVICE_INFO

  The only event of audio device, which contains information about the current state of the audio device.

  Nice.  No links or explanation to ALL this information.

  You can capture these events.  I posted a sample in our base of knowledge here: http://supportforums.blackberry.com/t5/Native-SDK-for-BlackBerry-Tablet/Detect-Audio-Track-Has-Finis...

• Pop the end of 13 items

  Hi, I'm new and trying to figure out I want.

  -I get a loud pop at the end of my project folder and an odd

  freeze frame of the interviewee. If I play the clip itself, it is fine.

  When I record/publish POPs and freeze frame the two appear.

  -I also get glitches in the published file that do not exist

  in the project file. Gel light video. I went to my C drive (I was

  make a drive hard laptop but I realized that it was not smart).

  Thanks for the help

  Andrew

  Andrew

  What version of Premiere Elements and on what operating system works - it?

  What are the properties of your source media including file extension? What are you or the setting of the project the project preset to match the properties of these media source?

  Just as important, what are the details of your export settings? Looks do you happy timeline export to a file saved on the hard drive of the computer.

  What players are used to view the export?

  You wrote

  -I get a loud pop at the end of my project folder and an odd

  freeze frame of the interviewee. If I play the clip itself, it is fine.

  When I record/publish POPs and freeze frame the two appear.

  In your response, please give details... What player is involved when you write "if I play the clip in itself is fine." Are you referring to the source file before import or playback from the timeline content while you're still in the editing area before be exported? This audio pop and the freezing of the video appears before and after or only after export?

  Please consider and provide more information.

  If any questions or need any clarification, do not hesitate to ask.

  Thank you.

  RTA

• Importing a .m4v audio is cut at the end first Elements 11

  I have videos that were taken with a Nikon d7100 and file is .m4v (exported since the new Apple app Photos) and when you import this file into first elements 11 the end of audio is shifted.

  I was recording the end of audio performance and the applause because the number of seconds before the video ends in fact.

  It's quite frustrating, I've used this 11 first elements for a few years without and questions.

  (I use a retina Macbook Pro 15 inch running OS X Yosemite)
  

  

  .

  I realize you must export the file in the pictures Apple app as an "original unmodified" and it exported to a .mov file.

• Audio loop at the end in question Media Encoder

  Turned into a problem when rendering After Effects on Media Encoder since update to 2015.3. When you send an AE project to the SOUL, it will make a part of the audio at the end of the video even if there is no audio data. I tested the rendering in AAC, Dolby and MPEG audio codecs in the SOUL and the problem persists. Then I used first to import the AE project and saw on the waveform in import, dealing of EI, the audio is repeated. When rendering AE for an intermediate format, there is no audio loop. It seems that this issue is only to come in trying to go the AE and return in any other Adobe software.

  I also found that people have had this issue and other similar for over a year at this point. Adobe has even closed open a forum that had this problem and it as answered, which was not clearly marked.

  Original thread: Audio Glitch rendering repeat

  Reddit Thread (similar question): https://www.reddit.com/r/premiere/comments/4l76tz/has_adobe_really_not_fixed_the_audio_loo ping_at /

  First Screencap:

  Video excerpt:

  Video rendering through SOUL with preselection of Youtube HD 1080 p

  This problem is fixed in update fixes after effects CC 2015.3 (13.8.1). This update, available now, can be installed by using the creative Office Cloud app, or by choosing Help > updates within any Adobe application.

• Vista plays only 63 seconds of the first song to an audio cd and then goes at the end.

  Vista will play only the first 63 seconds of an audio cd then jump through to the end. This occurs using either media player or itunes. The disc information appears.  My cd set in my other computer which has XP. My DVD/CD ROM works fine for the mp3 discs and installed software. My cd is clean, I have AutoPlay activated.   Help, please

  Hi Meeker,

  Thank you for using Vista answers Forum.

  At this point, you can try to replace the CD drive with a known working drive to test the possibility of a device failure.

  No idea what the error was when it was your PC friend?

  Impatience back on your part.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Movie Maker - releasing only audio, is it possible to publish the exact length of the audio and does not include the lot of silent at the end?

  Windows Movie Maker - have 6 minutes of audio spliced, I would like to publish in the form of an audio clip with no video.  I heard that this is possible, and it all works, the 'framework' includes 6 more minutes of space without air circulation that gets compiled with the planned 6 minutes of audio matching 12 minutes of audio rather than the 6 minutes.  Is it possible to MovieMaker 'See' the end of my audio instend, to include 12 minutes in length with it default?  Should I include photos or video for the project to publish only 6 minutes, instead of the 12 minutes?   I hope this makes sense...

  I assume you are using Vista Movie Maker 6 and not Live Movie Maker?

  It is a problem that I've not seen before... the recorded length must be equal
  at times combined clips on the timeline. I guess it's possible
  If you've done a lot of editing/trimming clips... something was corrupted.

  I was wondering... If you import the .wma file saved in Movie Maker and drag
  it to the timeline... it shows the clip as being the length of 12 minutes? If it isn't...
  Perhaps you could he split and right click Delete unwanted 6 minutes and
  then re-save.

  Divide... drag the playback at the end of the music and the type indicator... CTRL + L
  .. .to split the file then right-click of the unwanted part and click on delete.

  Tip: Unlike clips video... audio clips can be dragged to the timeline, so don't forget
  they are dragged all the way to the left to prevent air from dead at the beginning or
  between the clips.

  It may be worth trying to go to... Tools / Options / compatibility... tab and the left click
  the "All default settings" button before the Save.

  And... If the clips audio source are not the. WMA format... it could be a useful
  try to convert them to WMA before you import into Movie Maker.

• the audio tracks of the missing at the end when played notes from audio files.

  I copied the audio tracks in the media player of different record library. The discs are very clean and none of them were damaged. When I play these beaches towards the end notes are always droped. It sounds as if the Truck was damaged. When I listen to these tracks on a DVD player or another player, yet there is no problem. Is this a software or hardware problem and what can be done to solve this problem. I regularly receive updates of windows.

  Hello

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Update of your sound, card drivers and check if the problem persists.

  Step 2:

  Test the issue in a clean boot State, and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

• Captivate 8 - my audio does not play at the end of each slide after that I publish.

  It plays very well when I saw the individual slides, but after I publish some slides cut the end of the audio recording. I tried to remove and re audio recording.  Nothing solves this problem on some of the slides.   I am at my wits end and don't know what to do.  Please help, any suggestions?  Thank you.

  Leave a small space at the beginning and end of each slide so that Captivate

  see all audio clips as an audio clip of the major project.

• Add cut Center dissolve at the beginning or at the end of the Audio Clip

  Long time user of Avid Media compose and Final Cut Pro, but I'm now in first and get a smooth transition. That said, I'm looking for a simple way to add a cutting Center (or customize) dissolve the beginning or end of an audio clip when there is not another clip next to him on the track. Most of the discussion that I found in my research has to do with handles, and I understand the need for the head and tail on a clip to add a transition.

  This talk is a clip that has a lot of media, on both sides, but if he is alone on the track (no clip shot at it), it doesn't seem to be a way to add a Center Cup dissolve, or anything other than a "start to cut' or 'end to cut' transition period. It also seems that you can not change the alignment of such dissolution in the effect control window.

  I know it is possible to achieve the same effect by adding the passage and then by dragging the clip in or out point accordingly using a trim tool, but it's an extra step that seems unnecessary.

  Where is unclear, here is a screenshot of the type of clips that I refer:

  

  Here's how I've solved the problem, but I wonder why it is not possible to simply add the kind of dissolve I want to if there is enough grip to support:

  

  I am looking for a simple way to add a Center cut dissolution to the beginning or end of an audio clip when there is not another clip next to him on the track.

  You can not.  By definition, the Center to Cut requires two clips.  There is nothing to 'focus' on with a clip.

  Premiere Pro has the ability to extend the ends of a clip when you add a transition.  You will need to provide that when you place your In/Out points, or extend the clip manually after you add the transition.

• Audio glitch at the end of exports of EI

  I've just updated Media Encoder at 10.3.0.185 and Adobe After Effects to 13.8.0.144 (running on Windows 10). Since then, I've been meeting a glitch in the audio of any After Effects projects that I exported out of Media Encoder. Everything is going well for most of the video, but as I reach the end of the exported video, the audio starts to double or to cut and move to another part of the track.

  It does not exist in the AE project or the original audio track, nor does it occur on any video I export directly into After Effects. I tried to export with h.264 and Quicktime, with a variety of presets for both, for consistent results. If I export a video directly from AE, then re - encode the video in Media Encoder, so the problem does not occur.

  I use this workflow without problem for a while now, so I can't imagine anything else that I do other than the software update. Someone else has experienced this problem / have tips on how to solve this problem?

  Hi Liam.N,

  Sorry about that. We have a fix in the next patch. Recommendations and workaround are here: Re: last second audio skips and repeats after upgrade 2015.3

  Kind regards
  Kevin

• Audio does not pausing at the end of the slide

  Hello world. Captivate 8 using, version 8.0.3.290, 10 Windows.

  Have a problem with the audio in a project where the user progresses to the next slide by using the next button. However, we recorded audio outside Captivate, saved as MP3 and dragged and deposited the corresponding MP3 files in the slides in the film.

  We presented the project preview and audio is not a break at the end of the slide and wait for the next button to be clicked. Instead, he continues to audio for the next slide. How to stop doing this?

  

  

  Thanks in advance for any help you might be able to offer.

  Be sure to leave a small space after and before each audio clip in the slide. This way Captivate will not hold account is a large audio file distributed over several slides.

  Another tip: don't compress to mp4, if you import audio clips to Captivate but keep the original wav files. Captivate will compress to mp3 at the time of publication. Look in the library, you'll probably find that Cp has created a wav from your mp3 file.

• Audio artifacts in at the end of the exported video.

  When exporting Adobe audio artifacts sequences is generated at the end of the film. Sometimes, it is an echo of the last second of the movie.

  Anyone have this problem?

  Yes, I've experienced that too, export via export (no queue) or upgrade to the latest version.

• Why they are my exports video extra second bad audio at the end?

  I've recently updated to the last Premiere Pro CC 2015 (February 2016) and I'm having a serious problem with exports. At the end of each export, after that the audio is supposed to disappear for a cross fades, there's an extra second or more audio that is a repetition/echo of the end of the audio track. The video out crumbles as it should but the second additional audio during the dissolution of the video ruins exports. It is a new glitch/bug that I've never experienced before.

  As noted I use bland Crusaders for audio exit point. Then I tried to fade by using keyframes at the end of my audio tracks. In some export audio now will cancel at the end of the video as it should. Other exports (including exports batch that apparently), there's even more time audio which ruins the video. Does anyone else know this? Anyone know a good corrections?

  Hello

  Yes, it is a known problem that will be fixed in a future release of Premiere Pro. In the meantime, there are two workaround solutions:

  (1) place a clip in the section of your sequence with no audio (which occurs the closure) and either the volume to negative infinity, or disable the clip (right click > activate). You can also place a silent clip exported/generated in the section.

  (2) for export through TEA, which is where this problem occurs, turn on the preference of the SOUL "import of the sequences in native mode. This should prevent the problem even if you do not have the above steps.

  Sorry for the inconvenience. Hope workarounds help.

  Colin

  First Pro EQ