Pop instant messages to other users on a network of Windows 7 Prof

Similar Questions

• received a message that other users have logged on to my computer

  When I rebooted my computer which i rarely stop/restart, I received a message stating that the other users are logged on and I wanted to go forward.  There should be no one else except my admin account & a guest account. I ran MS Security Scan which found nothing. Should I be worried? Should I do something else?

  My computer is a Gateway desktop computer around the age of 20 months, under Vista 64-bit, do not know what other information you might need.

  Hello

  · The guest account is disconnected?

  Disable the account invited on the computer and check the results. You can check the link: enable or disable the guest account the: http://windows.microsoft.com/en-US/windows-vista/Turn-the-guest-account-on-or-off

  Also, make sure that you update the security software installed on the computer.

• is "Release manager" software of hp. It opens in a pop-up on my other user account.

  I run Windows Vista 32-bit.  I wonder if the following message is a HP program. It opens in a window in my other user account, just after I start:

  "User account control program Version Manager of Hewlett - Packard Company" and

  "c:\Program Files\Hewlett-Packard\HPAdvisor\VersionManager.exe" and "Install updates".

  I was concenered, it wasn't a HP program because I recently visited a site installed, what a service repair workshop was a great cookie in the folder my documents. And we told him he would do damage to my pc, if you plan to remove.

  I ended up formatting of the hard disk and reinstall all software, after having consulted the Microsoft support forum and follow the directions I found on how to do it on the HP website. Stupidly I have no back up my documents because I didn't take the time before hand and not the formatting of the hard drive because I didn't want to postpone the virus after reinstalling the operating system, etc., and I lost a lot of information.

  In any case the "User Account Control Program Version Manager... ask the password for my administrator account, now.  I am still concerned that the great cookie is somehow still on my PC, perhaps in the registry... I am a novice with the pc don't know the ins and outs.

  Hello lzmonk,

  Manager version is part of HP Advisor and can be enabled or disabled via the HP Advisor program.

  Launch of HP Advisor and you'll see a key that allows you to access the settings. In the settings menu say Manager version does not run at startup.

• How, as a network administrator, to make Silverlight available not only for me but for all the other users on my network?

  I encountered this problem yesterday during the installation of Adobe Flash Player. To solve it, I had to go to regedit and change the permissions on the four keys on each computer on my network. Once I had the solution that I was able to make the necessary changes in less than an hour and now all users on my network is able to use the Flash Player.

  I have online sought an answer to this problem with Silverlight, but came short. Any help would be appreciated.

  Thank you. Just reply to * address email is removed from the privacy *.

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows XP TechNet forums

• BlackBerry Smartphones Blackberry instant messaging between blackberry users

  I was wondering if anyone knows if IM text is stored on servers or are they diapear in the air?

  From what I've heard that they stored anywhere, but I would like to know for sure... RIM will not be replied to my question unless I have register and have an account.

  Thanking you in advance!

  Welcome to the forums

  BlackBerry is believed to be extremely safe devices, and that's why many companies prefer them to other smartphones. I can't Imaging RIM store such information on their servers, they essentially act as a conduit for messages from one device to the other. You can be quite certain that they don't keep this information because it would probably violate privacy laws too. The only place IM text is stored on your phone.

  However, if you use a phone from the company, then the company (if it uses blackbery enterprise server) can potentially open information if they want, but not the RIM.

• How to change what programs are other users can use it on Windows 7?

  On my laptop under Windows 7 Home Premium, I recently decided to get another user.

  I found that this new user has access to a small selection of my programs.
  How I choose which programs can access this user?

  I also found that the changes on the new office of users affect my user head office.
  How can I stop this?

  Thanks in advance,

  Rowan

  Did you create a guest user account or a full administrator account.

  Functionality is limited to a guest user account

  http://Windows.Microsoft.com/en-GB/Windows7/turn-the-guest-account-on-or-off

  http://winsupersite.com/Windows-7/Windows-7-feature-focus-guest-mode

• How do you get the other user accounts to access the windows

  I have three user accounts: me, my wife and my son. I installed fusion and windows log in my admin. My wife is a teacher. I installed a program on my log test to test. Works very well. Connect me to the user account and fusion begins to my wife, but I do not receive a prompt to install windows again I certainly don't want to do. How do I set up so that my wife can run windows in his account and make that his school work? Thank you.

  Take a look at: sharing a VM between users on Mac OS

• How can I access my recorded TV on other computers on my network in Windows Vista?

  Original title: network tv recordings

  I have 3 computers throughout my house running vmc (living room, child's room, bedroom main &). Is there a way I can have each registered computers shows appear in the tab"tv recording" Bascially if my children record their emissions on them, I wish they were able to pull them up on the living room computer. From now I have them appear in the videos tab, but I would like to have allthe record appear on the records tab Tv. I tried to make it look a shortcut to the folder on the network, but no shows on the other computer appear in the record of the tv tab. I will be still them stored on their own computers, but just all of my shows to appear in the tv recording tab.  Thanks in advance.

  Have a look here: http://thegreenbutton.com/blogs/mike/archive/2007/01/12/158079.aspx

  It is much easier with Windows 7, where you can do with homegroups.

• Why my 5th generation ipod can not send or receive messages from other apple devices?  My ipad works great, but my Ipod touch keeps giving me the exclamation with message not delivered?

  Why is not my Ipod 5th generation touch send or receive messages from other users of apple more on wifi devices? My ipad mini still send and received messages on the thin wifi but ipod guard give me exclamation red with the message not handed over.  I'm happy to send to my habit a few contacts that I always send to apple devices have.  I don't know why she would suddenly leave the sending and receiving.  I did the last update, it still does not.

  Have you tried

  If you can't send or receive messages on your iPhone, iPad or iPod touch

• How can I stop firefox sync to synchronize with the other user accounts on windows 7

  I have 2 user accounts on my computer. When I put it to Firefox sync on my computer to also synchronize user account all my favorites, passwords, & information to Firefox in the other user accounts on my computer (windows 7). I don't want to have all my information is synchronized when using Firefox, other user accounts. y at - it a setting that I am not seeing that I can use to fix this?

  Go to Menu > tab OptionsSync > disconnect it > sign in with this account you want...

• ring on the Windows Live messenger Instant Messaging

  Original title: emergency aid

  Yahoo messanger will beep when you receive an instant message. How to set the life of windows to make a sound when I get a message on health?

  Hi AnnemarieF,

  · What version of Windows Live messenger, you have installed?

  Follow the steps below:

  a. open the Windows live messenger

  b. click on tools

  c. click Options

  d. in the left pane select sounds or alerts and sound (depending on the version of Live messenger)

  e., and then select the sound you want to play when you receive an instant message.

  For more assistance, you will need to post your query in the live forum for better support. Link: http://windowslivehelp.com/forums.aspx?forumid=568c1adc-41d2-47e0-bb2c-cdfedd9642ef

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Allow other users to connect through my internet connection of mobile phones.

  Quite simply, I'm setting up my xbox live to run through my internet connection of mobile.

  When I select the check box to allow other users of the network to connect through this computer's internet connection it turns off immediately, so is not enabled.

  I tried disabling the firewall etc to see if it limited the ability of sharing, but it did not work.

  Any information or help would be greatly appreciated.

  Hi Stewart,
   
  Please go through the article below which will help you to connect to windows live using your internet connection for your laptop.
  How to connect your Xbox 360 wired controller to a computer running Windows
  http://support.Microsoft.com/kb/906347

  Please also see the link below. This could help you.
  http://support.Microsoft.com/kb/978618

  If the problem persists, I suggest that question you post you to Xbox forums.
  Xbox support

  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

  http://www.Xbox.com/en-us/forums
   

• The other user appearing in the search files

  There are multiple accounts on my PC and when I use the search bar in the start menu, it evokes the files of other accounts. How can I do that only look in my account? Thank you!

  Hello

   

  Method 1

  You can consult the section 'is the search index and how can I change it?' in the article mentioned to restrict search results to display files of other user accounts.

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  For reference:

  Searching in Windows: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/searching-in-Windows-frequently-asked-questions

  Please let us know if the problem persists. We will be happy to help you further.

  Thank you and best regards.

• Pop-up message to all registered users

  Good afternoon
  
  Is it possible to send a pop-up message to anyone is saved in an APEX Application - such as: "the system is going down for emergency restart of the server. Please log out. ', or same type of message.
  
  I understand that it is possible that someone who shows as connected may have closed their browser and all that. But I have a 'strong' request to make the popup thing if possible.
  
  I can scan through those who are connected, find their emails and send a mail message electronic, but which may not be the same degree of urgency to the user as a pop-up message would have - especially if the popup is modal.
  
  I tried to search the forum, but I saw nothing on that. This means not that's not here, it just means I think.
  
  Sorry I forgot: APEX 3.2, Windows 2003 servers. Oracle 11g server. If you want more details, let me know.
  
  
  Thank you
  Don.
  
  Published by: dfcii_2 on Sep 1, 2010 17:27

  You can not 'send' a popup, however you can create a region on 0 Page containing this information (read from a table or other) and create a condition of this region to don't show when the information is in fact here or dependent on a date/time (or user or all what you can come up with). This regiin can appear as a popup (using JavaScript) or a yellow banner or any other look nice thingy.
  A user will see this information if he moves to another page or refreshing the current. So if a user just looks like a page and not noting, it will not notice-, but who cares, because it does not ;-).

• Why do I get a message sometimes are you sure you want to stop computer because other users use the computer, I have only 1 computer

  Is it possible that someone took over my computer when it is sitting idle? I have windows XP and use ad free safety.

  Hello

  ·         How many user accounts that you use?

  You may get this message if you are connected to the different user account and I forgot to close before moving on to another current account.

  Also if you have fast user activated switch, because it sometimes causes this message.

  Note: To turn on the fast user switching, you must also enable the option use the Welcome screen. This function cannot be used if your computer is a member of a domain. To turn on the fast user switching:

  a. log in the computer as an administrator.
  c. Click Start, click Control Panel and then click user accounts.
  d. click on change the way users log on or off the power.
  e. If it is not already selected, click to select the use the Welcome screen check box.

  NOTE: The check box use Fast User Switching is unavailable until you click to select the use the Welcome screen check box.

  f. Click to select the check box use Fast User Switching and then click on apply Options. Exit the tool user accounts.

  Also, if you have drives or shared folders on your computer on a network - it may be you say that the other computer on the network has always access to your files/folders and you are disconnect them from your PC when you stop