is "Release manager" software of hp. It opens in a pop-up on my other user account.

Similar Questions

• Illustrator for the opening of the problem when you use other users accounts

  computer = mac os x 10.6.8

  program = design premium cs5

  Question = will work perfectly when connected to the user account that the program has been installed under all programs.  When connected to a different user account, all programs will work except illustrator.  When you try to open illustrator I received a message "Unable to complete requested operation" and it just doesn't work.  For any help or suggestion would be appreciated.  I already reinstalled illustrator without result.

  More than likely a permissions problem.

  Use the isk utility to fix the permission for each account.

  If that didn't solve the problem hughlight (selection) on the Applications folder / Adobe Illustrator CS 5 and select Get Info (command I) and watch and watch the section sharing and permissions at the bottom of the dialog box and make sure that all of the listed users are given read/write privileges.

  Eevn if they are listed as it then click on the icon of a padlock at the bottom right to open the mechanism to read the information and go the the og the lock left where you see pre as an icon and a facing of arowhead down and select from the drop down to apply these rules to all included items.

  Close the Get Info and try to run THEN.

  Maybe this will help.

• UAC problem - I can not open all files or do anything that requires user account control

  Hi, I have a very annoying problem. I did something to my laptop (which is come with Windows Vista, by the way) and now I can't open any files or do something that requires UAC. When it arises, he asked an administrative password and there is no box or anything for the password and it won't let you click on 'OK '. I'm very confused and I hope someone can answer my question as soon as POSSIBLE. Thank you.

  -Gameslaya99

  Hello Gameslaya99,

  I try to try and return your operating system to the last known good configuration.  I have included the link below with the steps.  Please let us know status.

  Using the last good known Configuration:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Thank you

• Its not letting me go in manage other user accounts

  Why isn't the computer let me in managing other accounts or the deletion of certain Articles?

  Why isn't the computer let me in managing other accounts or the deletion of certain Articles?

  You must be connected to an account administrator, or in possession of an administrator password.
  Unless one of the above, you can't do what said you you wanted to do. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I am the admin, but cannot open the comments or other user accounts

  How can I fix this.

   
  Thank you in advance for your kind attention.
  Concerning
  Imad. (Leaner ESL)
   
   

  Thanks for your reply.

  Finally I have the problem, that i talk about above.

  Thanks again.

  muthu Pearl,

  How did you go about fixing so that others can benefit in the future from this conversation?

• Cannot open my other user accounts... Download the message, that the user profile service service has no logon. cvannot loaded user profile

  Having only one administrator user account. All my other user accounts will get the above message. Help, please.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• window of 2008: ' I can't open Group Policy Management "group policy to manage, you must log on to the computer with a domain user account.

  Hi, please advise, I can't open Group on win Server 2008 policy management, it is said
  "To manage Group Policy, you must log on to the computer with a domain user account.

  Hi Cucu KurniaPutra,

  Thanks for asking this question to Microsoft Community!

  The problem occurs in Windows Server 2008 Network, please post your request on the Microsoft TechNet forums to get help.

  
  Here is the link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• A user account cannot run a .exe, only to get hold to open/save.

  A user account running on this PC suddenly can't startup such as IE applications, Solutions from HP, widget bar displaying stopped, etc. could be a virus, the user compained about nagging holdup to install virus protection, even if we have MacAfee in place and fine workmanship, all protections in place. Double click on IE icon to start and gets the heist to open or save the .exe file. How should I do? I'm an admin, but I don't see a way to solve this problem in the mapping of types of files/mimetypes.

  Hi Iluvtunes,

  This could be a problem with the corruption of the user profiles, because this issue is not with the other user accounts. I suggest to create a new user and check if the problem persists.

  Steps to create a new user profile.

  1. Open a user account by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. Click Manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click create a new account.
  4. Type the name that you want to assign to the user account, click an account type, and then click create an account.

  If the new user account works fine, then you can copy all the files to the new user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer or useful you help others find the answer more quickly.].

• Vista - unable to manage another user account

  I am connected to a user has administrator rights account.

  I select-

  Control Panel > user accounts > manage another account > 'screen' - permission to continue > continue > "choose the account you want to change." =

  No user accounts to select from.
  
  During the initial connection to the computer, I have 3 other user accounts on the main login screen. Two of which I can log in with their password.

  A user login, the password has been forgotten.

  Under System Properties - profiles user show all the acoounts as 'Type - Local' user and 'status - Local '.

  I am at a loss... anyone can help solve?

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  You can paste sections mistake here (maybe even if repeated section 1 only one instance of each)
  section of error that is usually 10 lines or more.
  ---------------------------------------------------

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Try runnng Chkdsk of Recovery Options
  (it of a more efficient way to manage to restart the computer and might work)

  -------------------------------------------------
  Or
   
  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
  Rob - bicycle - Mark Twain said it is good.

• Manager software bad sync Smartphone to blackBerry for mac

  I installed the software for mac Pocket mac and it can't even connect to my blackberry via USB.

  Is there something that RIM does not tell us mac users on how to make it work?

  Its September already and the website says the program office for Mac is ready in September. When? Its not available yet!

  A bad sign that mac users get when installing software is when it requires running an account of Directors as the software was not properly designed to run on Mac. Only windows users who know no better, run in the accounts of the administration. Mac users are much too smart for this absurdity. Since when any program should seek enforcement of an administrative account dangerous to make it work? Maybe better rim would hire an expert talent of apple to do the job?

  The other sign of the evil software written is when he tries to install the two programs at the same time and the computer freezes for 10 minutes before it sorts things.

  I did install blackberry media sync and it has no problems connecting to my blackberry or copy itunes media to him. So why software Pocket mac cannot work? He repeats to me that synchronization expires when it is connected to my mac. It is certainly not expire with media software is so the only thing that might be bad is the program itself being badly written. I'd hate to see how the desktop software gets the same treatment in October (not yet available in September) when it comes out.

  So, how can I sync my calendar, mail and other things? And what exactly is the express pocket on my blackberry that is supposed to be? No information available on the blackberry to tell anyone what it is. In addition, it also times out when I click on it to get installed it. In addition to the crapware legalize, how about some more info in the file as to what the program is and why anyone would need to install it?

  I can not here looking to get to relevant results either. Maybe I type in the correct secret code if anyone knows what they are?

  For Blackberry Desktop Manager is almost officially released. It works very well. I can tell because I have a beta version of leakage. Its sweet! If you can't wait im sure a quick search, you have the beta version of leakage...

  But I'm sure that its on track for September.  And why you ago on relaese date? It says September. No September! St.   It comes out in September. Gripe about this whenit October...

  Good luck anyway, enjoy your Storm and Mac together!

   

  Well, I'm griping on this subject since its October 1 and it will not be released until tomorrow... wah wah wah. I was right! You were wrong! I don't want a cause of beta flight, I don't have to go to the bathroom right now.

• Software update new cannot open applications

  Model: Macbook Air 6

  Recently updated software (Mac OS X 10.10.5)

  Restart, but now I "problem report for Finder" on the loop. Says "Finder close unexpectedly. This report will be sent to Apple. "

  I click OK but the message just re-.

  Cannot open the application Photo booth, FaceTime, or even the App Store, Mail, Notes, Google Chrome :/

  Only things running are Safari and iTunes.

  I have no idea what I did wrong. Desperately need help!

  Hello mia_sn,

  Thank you for using communities of Apple Support.

  I see from your post that you have a problem with the Finder leave unexpectedly, and that causes a problem with the opening of some applications. I know how it is important to ensure that you have access to all your applications. I have a couple of things I want you to try.

  First of all, try to start your computer in safe mode. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs some checks, check your startup disk and prevents certain software from loading automatically or opening. The following article will help you start in safe mode:

  OS X Mavericks: start in safe mode

  Once you're in safe mode, test and see if you can open these applications. After that, give your computer a fresh reboot and then log in normally and test again.

  If you continue to have a problem, try to test in a new user. Test in a new user account can help circumvent the problem of your main user account. This article will help you set up a new user:

  OS X Mavericks: set up users on your Mac.

  Once you are in a new user account, see if you get the same result when opening these applications.

  Best regards.

• Service management software

  I searched in vain for software to run with MAC iOS for our basement waterproofing company that makes:

  1 plans/drawings

  2. calculation of the costs/estimate

  3 document management/production

  4 contact management/progress hunting quotes

  5. planning of tasks

  6 job order

  7. planning of tasks

  8 progress management

  9 billing

  10. after completion support

  11 maintenance

  Any thoughts would be much appreciated.

  Julian

  iOS is not running on MacBook Pro.  To find your Macintosh operating system, go to menu-> this Apple Macintosh Apple.

  iOS is only for iPhone, iPod Touch and iPad.

  Go to http://discussions.apple.com/docs/DOC-2463 and select the operating system you are using.

  There are many tools for drawing 2D and 3D for Mac on this tip: *

  http://www.macmaps.com/CrossPlatform.html#vector

  FileMaker Pro is an excellent program of database, but you can use a number of worksheets on this trick as well.

  Peachtree accounting is an old favorite Mac accounting software, and there are other institutions.  Mac project management software are compared on this page:

  http://Mac-project-management-software-review.TopTenReviews.com/

  Classic note refers to the old operating system on the pre-mid2006 Mac Mac and before 2004 as a starter system emulated.  MacBook Pro cannot run it.

  * Links to my pages give me an allowance.

• Help! Need a Manager software

  Have 7410 HP all in one.  New macbook, OS X.  Cannot scan.  After much research, I think it comes down to the fact that I need Director for Mac.  I am printing and fax very well.  Cannot find the Manager software anywhere.  Have you tried original Hp and HP printer software update installation disc.

  Any suggestions would be greatly appreciated.   I tried to scan the area of the Image, PhotoSmart, but get error that it is impossible to initialize the printer and go set up to the Director.

  Thanks - any advice would be greatly appreciated.

  Thanks – IT WORKED!  I think that some the most of the problem was installed several.  By uninstalling and from scratch, everything works.

• Where can I find my new hp laptop laptop system software and recovery to open their Web site?

  Where can I find my new hp laptop laptop system software and recovery to open their Web site?

  1. I have install the hp bios system update and failed.

  2. the beginning of HP ENVY 17 laptop u011nr - displays the message "something wrong."

  3. then I do the restore point.

  4. once I did this, the PC can not correctly run windows 10. Has lost nearly 50% function.

  5 then, I run the recovery.

  6 the result is OP deaths.

  I invited, I need to reinstall all windows of the OP and all equipment control software.

  Where can I find my new hp laptop laptop system software and recovery to open their Web site?

  Hello

  Please use the last item on the following link:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-notebook-PC-series/10862141/model/11992079

  or

  http://support.HP.com/us-en/mediaorder/HP-envy-17-u000-notebook-PC/10862141/model/11992079/softwareitem/900074-003/STEP1?SKU=W2K87UA

  Kind regards.

• Need a Wi - Fi for Satellite L755 Manager software

  After I've upgraded to Windows 8 last year I'm confused in the face of the connection to the WiFi of my Toshiba Satellite L755, even me, I pilot last installed for Wi - Fi, but there is no software that compatible with my laptop Wi - Fi Connection Manager, I try several times to connect to Wi - Fi and it connects by chance only.

  Is there that a Wi - Fi connection for laptop Toshiba Manager software can be useful?

  In general you don't need special software for WLAN connection and it should work with Windows settings only.
  Maybe it sounds stupid now what software do you mean exactly? ConfigFree maybe?

  Wireless network adapter must be properly activated so that your computer can detect your WLAN. When you click on the WIFI symbol in the taskbar you will see listed all networks wireless detected in your area. Click on your WLAN and click on Connect. Of course you should choose option to connect automatically, so each time when the laptop detects your mobile phone WIFI connects automatically and you should have full access to the Internet.