pop up when I turn on the top of the Tower

Similar Questions

• When I turn on the Tower, I sometimes get an error in checkpoint 0085. What can I do so that I don't have to reboot

  When I turn on the Tower, sometimes, I get the password screen, but not always.  0085 error is on the screen

  Hello LindaDearborn,

  1. don't you make changes to the computer (software or hardware) before having this problem?

  This problem may be related to hardware like your CMOS could be altered. If the problem persists, you can contact your computer manufacturer to check if there are any questions related to hardware components.

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• Please help get the same message when I turn on the computer... on my mini hp 110 s/n CNU9440PW9

  I'm not sure what the name of the product is a don't know if it's the 32 or 64 bit, but when I turn on the computer, it pops up with an agreement that says enter current password one I tried some it could be a TI repeat me password verification failed... fatal error... missed are CNU9440PW9

  Hello

  Enter e9lovv12do (3rd character is a lowercase L)

  Kind regards

  DP - K

• When I turn on the computer, I get this message - COM + Event System has stopped working. How can I activate this return?

  I had virus protection total defence installed. This occurred immediately after.

  Hello

  Thanks for your answer to my question. I was about to start step 2, by performing a boot minimum when a message pops up informing that 2 programs were slowing down my computer and also to stop because they were also running. Ironically, these programs I've ever used has appeared on my computer advertising protection against viruses and to speed up the computer.

  I did not purchase the license if it comes to start up all the 3 or 4 days telling me that my computer is slow.

  I uninstalled both programs, which I won't mention for obvious reasons and the event system Com + message did not return after the computer has restarted 3 times. Apparently, the problem has been resolved, but I will continue to have oversight. If the problem returns I'll restart and inform you about the results.  Thanks again for your expertise. guavaridgemb

  Thanks for posting your question in the Microsoft Community.

  I understand that when you turn on the computer, you get an error message indicating that COM + has event system stopped working. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps and check the question below:

  Step 1:

  Check the event viewer for the logs of error from the links below.

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer):

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

   

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

   

   

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Step 3:

   

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• Restored my HP Pavilion to factory settings and now when I turn on the computer starts a recovery to start, then he can't find something wrong and want to do a system restore

  I have a HP Pavilion with Windows Vista.  Friday night, I restored the computer to the factory settings.  After doing what he started back to the top as usual and was very good.  I shut down my computer Friday night and then Saturday morning, when I turned on the computer screen to start Recovery came and when throught he process of trying to find errors and found nothing and then gave me a message at each stop or do a system restore.   Does anyone know why it would start this resumption of start after that I just restored it?   I'm ideas... Please help.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  You restored your computer for some reason any.

  And now you have problems after using the HP recovery process.
  It seems to me that you might have another problem inyour computer.

  Problem with HP Recovery Process(during or after), contact HP.

  It's Recovery process HP, not Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• my user name and password are saved on my webmail site. How can I remove them so they don't pop up when I go on the site?

  my user name and password are saved on my webmail site. How can I remove them so they don't pop up when I go on the site? I use cox.net webmail. Cox tell me it's a firefox issue. So, here I am. Can you help me?

  Hey, Julien

  Go to Tools-> options and on the Security tab click on passwords saved. This will give you a list of sites that you have saved a password. Just found your site and delete this entry.

  There are a lot of useful information in this article on the Firefox Password Manager. He should answer any other questions you might have.

  You can also delete cookies from this site in order to make the site you not forget if you have created a remember me cookie.

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Hope this helps!

• In windows 7, how to make firefox automatically starts when I turn on the pc. ?

  In windows 7, how can I make firefox starts automatically when I turn on the pc

  Start menu-> startup folder-> shortcut icon Firefox drag in the startup folder.

  If you don't have a startup folder in the Start Menu, create a new folder named "Startup" in the Start Menu-> shortcut icon Firefox drag in the startup folder.

  Check and tell if its working.

• White screen when I turn on the Satellite M50

  I have intermittently just get a white screen when I turn on the computer. Usually, the problem is solved by turning off the computer and try again - but sometimes I get a white screen again.

  It seems to be linked to the use of external devices - can someone give me clear instructions on which expected/doesn't have to be connected when I start and shut down the computer? Or other suggested solutions?

  Thank you

  Hi Rachel

  Believe me; It's not easy to provide an exact solution and that's why we need to study a little ;)

  Have you checked if the graphics card driver update could solve the white screen issue?
  If not, try to download and install the latest graphics driver

  You second question on the laptop stop problems is known to me. Sometimes it happens on my laptop too. The LTCC is a part of the Norton antivirus application, which is still running in the background of the operating system.
  This strange box "close the program" might appear because this context process couldn t be closed automatically and so the operating system can not stop.

  Especially the new application installation might help you. But why don't you use Norton Antivirus? What makes the laptop very slow. I have used this app for a long time but now I use the freeware program called Antivir. Its free and in my opinion much better than the Norton Antivirus.

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• When I turn to the Chinese news site to read some news in China, I get only small square box size rather than Chinese characters.

  Reading emails and news in Chinese characters.

  
  
  For this monment, when I turn to the Chinese news site to read a few novelties in China, I get only small square box size rather than Chinese characters. Even when I received emails from my Chinese friends in Taiwan or China, written in Chinese characters, I can barely see small square boxes I have my emails. Please can you direct me to that Microsoft site where I can download Chinese characters if my emails or news paper site is in Chinese. Thank you.

  Hi Sebastian,.

  See if this helps:

  http://Newton.uor.edu/departments&programs/AsianStudiesDept/language/asianlanguageinstallation_XP.html

  see you soon,

  Steve

• I use Windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  I use windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  original title: slow start
  • Faster processor.
  • Fastest hard drive.
  • Faster or more RAM/memory.
  • Less things loading at startup.
  • Appropriate and the most recent hardware device drivers.

  In XP, you can cleanup and optimize it in some way, by using the following tips:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are up-to-date and should work fine - there is another thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• It keeps popping up when I'm on the computer: programfiles\commonfiles\paretollogic\uus2\uus2.dll

  Original title: programfiles\commonfiles\paretollogic\uus2\uus2.dll

  It keeps popping up when I'm on the computer. what it means?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. do you have software Partetologic installed on the computer?

  The procedure below have allowed little to solve these issues:

  "" "" 1. click on start "all programs" Accessories "System Tools" scheduled tasks.
  2. in the tasks scheduled, click ParetoLogic record to select. Then click on "Delete this item" to remove the scheduled task.

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start