Portege 30xx Win2K - need to bus master IDE driver
Hello!
Could not find the driver, tried all the sites of Toshiba. The works of 10 times slower than expected :(hard drive
Help, please. Thank you.
Best regards
Vitaly
Hello
Why are you suggesting that the HARD disk works 10 times slower than expected? Did you use the 3rd party diagnostic software?
Usually to the IDE of rally driver must be installed during the operating system installation procedure to install Windows. So I think tat you will find any driver IDE master bus on the Toshiba site.
Good bye
Tags: Toshiba
Similar Questions
-
Portege R600-13Z: need screen part number - UK suppliers?
Portege R600-13Z
Need to buy a new screen - suppliers in the United Kingdom or a reference number needed?Thank you very much
Hello
I put t know the part number, but as far as I know that you need a * 12.1 WXGA (1280 x 800) widescreen mast *.
Generally any Widescreen Matte 12.1 WXGA (1280 x 800) should be compatible with Portege R600.But if you want, you can get in touch with a local ASP from Toshiba and could order such screen from guys
Here you a discovery of a data base with all FSA worldwide:
http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORTGood luck
-
Need controller Bus SM for HP Pavilion p-1120
Need SM Bus for HP Pavilion controller p-1120 w/Windows 7 64-bit.
There is no file "Controller of Bus SM" in Device Manager. How can I get one to download?
You can get this driver by using the Intel Chipset installation utility. You can find the utility to the site to download driver Intel. Motherboard you has the H61 chipset. You can use the Intel automatically detect and update drivers and utility software.
-
Where can I find Master UDS Bus kernel USB driver software Bus by TCP?
I cloned just my laptop to another laptop similar. I reinstalled all the drivers that came with the laptop recipient... but apparently not the one for the UDS kernel USB software Bus Master Bus by TCP and Windows 7 could not find one on my computer or online.
Maybe
-
Portege R100: Recover the CD USB 2.0 drive?
I need to reset my Portege R100 to factory settings, erasing the hard drive and remove all documents and programs. I don't have a Toshiba CD-ROM drive, only a CD/DVD of LaCie USB 2.0 drive. It worked with other laptops, but I can't get the R100 to start with it.
Does anyone have a suggestion?
Hi soren,.
Maybe you know that you can start from the CD-ROM when you push the 'C' button for aprox. 3 seconds when you press the power button. But it's only for internal solutions.
In your question, you could test whether it works when you push "U". 'U' stands for USB device!Hans Bye
-
Re: Qosmio X 500 - USB IDE drive not visible external HARD
Hello
Someone was kind enough to educate myself on this problem?
How to view the contents of an IDE hard drive connected to the USB port on my Qosmio X 500?
-The drive is already formatted and filled with data
-LED lights on the outer box, but the disc is not visible in the browser...I got my old laptop internal hard drive and I bought a box to be able to connect to the USB port on my Qosmio in order to get my data...
What is the problem?The hard drive come from 32-bit Windows XP and Qosmio with seven 64-bit...
I need to install a special driver? use a specific software? or configure specific settings?
Thank you...
> What is the problem?
Who knows? If other discs hard USB can be connected properly to the Qosmio laptop, the problem might be related to the connected HARD drive.
So I recommend this external USB with other computers.
If the other computers will not recognize it, so the external HARD disk is a problem> additional power supply is probably necessary for a HARD drive
Maybe my HDD USB requires a cable that can be connected to the two USB ports -
Not detected at all IDE drives
OK, because of my most recent thread, I was forced to pull a 3.5 "IDE HDD in my office in an enclosure for backup. The backup went perfectly, no damage detected in all. Then, I pulled the IDE cable in the Office for the CD player because he got in the way of the installation of the HD. I pulled by plastic, not the Ribbon. He slipped effortlessly, and the installation of what I had done several times previously worked perfectly. Until I started, that is. The computer has done is the automatic test sequence, but I noticed that the CD players and HARD disk are missing from the list of installed devices. I have no other devices, so I went into the BIOS to be sure. Synthesis system said, all IDE drives were "not installed". All cables are firmly in place, has not changed in the BIOS except the boot sequence. I need to install Windows on this HARD drive, I can not do because the CD player is also out. Help, please!
Wow I feel stupid. Ribbon IDE frayed.
-
I need to format the hard drive and it won't let me because the program is running.
Please help someone... I have a desktop running windows 7. I need to format the hard drive and it won't let me because the program is running.
Any ideas on how to get this tour using the bios screen, or y at - it an other way round. The drive has a partition, but no other programs on it. I'm actually getting rid of the computer and need to erase the first hard drive and reload windows xp pro.
Thanks for any help given, I'm desperate.
Original title: help with windows 7
Reinstall Windows XP
http://michaelstevenstech.com/cleanxpinstall.htmlInsert your Windows XP CD, and then restart your computer.
When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.
To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:
http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/
Windows XP will go into its configuration process.
Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process
Press F8 on your keyboard to accept the license agreement
Select the partition, and then press D on your keyboard to remove it
Select Format the partition using the NTFS file system
Press F on your keyboard to start the formatting.
Installation files will now be copied to your hard drive
Your system will be rebooted, the installation of Windows XP will continue
-
SATA to IDE drive hard converter
Hello
I need to transfer the hard drive to a Dell E510 Dim in a Dim of Dell 4400. The hard drive in the E510 (Samsung 80 GB, 7200 RPM, model HD080HJ/P) is equipped with SATA power and data connectors. The 4400 Dell has IDE connectors for the hard drive that is currently installed. Y at - it a type of converter that will allow me to install the SATA drive in the IDE machine and use the SATA drive as the secondary hard drive?
Both machines are running Win XP.
Thank you!
-
Satellite A100-036: need WXP video, LAN, WLAN driver
Satellite A100-036: need WXP video, LAN, WLAN driver
SASA. [email protected]Hello
Satellite A100-036 is a part of the series PSAANE;
Go to the page of European Toshiba driver and choose the PSAAN A100.
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EUYou will find all readers for your laptop ;)
Good bye
-
Satellite Pro M30 need to update my graphics driver
Hello
I need to update my graphics driver for my laptop but I don't know what the hell to do. Can someone please help me out and point/show me what to do, I would be very grateful.
Thank you
MarkHi Mark
Visit the Toshiba download pageand check if the most recent driver for your unit is listed there.
It is recommended to use the Toshiba driver designed because of the material.
-
Satellite L300 - need Win XP Network Controller driver
Hello
My laptop model Satellite L300, the operating system is Windows XP Home edition.
I had the driver problem.I need the driver for network (of yellow question mark in Device Manager) controller.
Which should I choose in the list of drivers to download?TNX!
Do you need a driver LAN or WLan driver?
Control of network can be both to check if you need a WLan or LAN driver
By the way; What L300-xxx you have exactly?
-
What do I need install the second hard drive HP PAVILION: p6633w
What do I need install the second hard drive HP PAVILION: p6633w?
donp815 wrote:
What do I need install the second hard drive HP PAVILION: p6633w?
Hello
You need two cables, one is a sata cable:
This cable is only for data and connect the hard drive to the SATA connector on the motherboard.
The other cable is energy:
http://www.itpartsdirect.com/STARTech-15-24cm-4-pin-Molex-to-SATA-power-cable-adaptor.html
It connects the hard drive to the PSU.
You can also buy a combo like this cable:
http://www.Amazon.co.UK/DP/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4
All you have to do is to connect the hard drive and that's it. Make sure that the main drive with the operating system is connected to the primary SATA connector (I think there are the numbers 1, 2, 3...)
-
Original title: I mistakingly put a copy of xp family on my slave instead of master disc drive.Perhaps I will learn one day someone ask first.
Mistakingly, I put a copy of xp family on my slave instead of master disc drive. And if this wasn't enough, so I thought it would be easier to remove the program on the master drive and keep the slave for program files and the master for the storage of the doc, movies. etc. Probrably you know there not well turm. On the master drive, I now have a folder that is 25 concerts, which doesn't let me delete or format the drive either. Any suggestions?
Hello
1. what exactly happens when you try to delete the folder that is located on the master drive? You receive an error message?
2. What is this folder?
3. what happens when you try to format the master drive? You receive an error message?After return the correct error if you receive one.
If you want to than Windows XP on the master drive only then change the slave to the master disc or install XP on the master drive.
To change the master or the slave settings contact the hard drive manufacturer or consult the manual of hard drive.Reference:
Install, reinstall, or uninstall Windows
http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall -
I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista
Hello
How to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
Maybe you are looking for
-
I have a Windows Mobile 6.5 POS from Verizon phone. I don't seem to be able to find the right download for the installation of Firefox for Mobile. Is it or is it not available? Installed extensions: None
-
Hi guys,. I use labview to control test, but normally predispose the user interface as a windows with buttons, indicators, graphic controls program etc... But "they" want to be a process diagram that can be used to control and monitor the user interf
-
Officeject 6600 will not accept a computer 2d for scanning to pc wireless
I used to have my PC Envy and my setup of the laptop for wireless scan-to-pc. Had a problem with my desktop computer and had to replace the operating system. Now, I can scan my laptop, but not my computer desk... error message when I try to scan to t
-
I just wanted to watch a movie and then I had a snack and went up to my computer (that I just bought) and I put in a movie. To my surprise, that nothing happened. Nothing pops up asking me if I wanted to play the movie or is it just started to play.
-
Original title: problem with WINDOWS LIVE... I use Windows XP SP3, and previously I was using Windows 7 in which I had Windows LIVE installed. Now the problem is that when I click on the Windows LIVE installation setup is not install and is rather to