Not detected at all IDE drives

Similar Questions

• Satellite P10 304 BIOS does not detect HARD and CDROM drive

  My HDD p10-304 has recently failed.
  I bought a new 60 GB western digital 2.5 drive "and installed today.

  At startup, the BIOS does not detect the drive, but also, it does not detect the CD-ROM drive.
  This makes me think that maybe it's not the player after all, maybe the onboard IDE / motherboard.

  I'm kinda stuck, so it's a new drive should work fine, and I have no way to test the motherboard.

  The only difference is that the insulation on the original drive sleeve should be reduced by half.
  The bit important (low, where the circuits would otherwise affect metal) is always there, it is the
  Few albums I had to remove but that should be no problem.

  Someone at - it suggestions?

  Thank you, Stu.

  Hello

  What happens if the HARD drive is not connected to the motherboard? The BIOS recognize the CD/DVD drive correctly?

  You bought the HARD drive compatible? To my knowledge the Mobile supports a HARD drive with interface IDE (ATA-5) increased.

  But as you said possibly the motherboard failures and he would be advised to contact the technician during a particular test

• THE ATTENTION! Has not detected one or more drives during POST

  I have a desktop T7400.

  during post, I get this error:

  "WARNING!" Has not detected one or more drives during POST

  Press F1 to continue... »

  I press F1 and it starts up fine, but I have to stop this message from appearing every time that I turn it on.

  I have 1 CD-ROM and 2 sata hardrives on the system.

  I need help please.

  Thank you

  Disable the option 1 SATA in the bios and save the settings. There is nothing connected to the sata port 1.

• Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

  Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

• Windows 7 does not detect multiple external hard drives

  I recently bought a HP Pavilion laptop to 7 Home Premium. I have two 500 GB external hard drives. When I connect them individually to the system, they are recognized and I can copy files to and from these External Drives. But when I try to connect both at the same time, Windows 7 does not detect the drive I connect then. Any help is greatly appreciated.

  If the disks are powered by the USB bus and do not have their own external power supply the problem is that the laptop does not provide sufficient USB power to control both.

  The USB specification, is that each port should provide 500mA at 5V. To keep their batteries, laptops usually provide 500mA to share between all available ports. If you need to use several USB devices with significant power, you must either externally powered USB hub or to provide the devices with their own power supply to cutting.

• Spectrum XT Touchsmart 15-1410n: does not detect the new hard drive

  After the upgrade to Windows 10 my hard drive divided into 9 different partitions, and most of them have been corrupted and I couldn't save it. I bought a new hard drive (HGST Travelstar 7K 1000) and replaced my old drive. I used a USB stick to boot and install Ubuntu 14.04 detected but only a 32GB Samsung drive and not my HGST 1 TB drive. How can I fix it? I would like to be able to access my new drive. Google says to mess with the SATA controller, but I can't do it in my BIOS. Any suggestions?

  You are not it is hidden. In my view, that Magical Jelly Bean can pull the Code out of the BIOS license once Windows is installed, but if you reinstall the same OS (Windows 8, correct version) it will be ignited automatically the first time that you connect to the internet.

• Windows 7 does not detect my external hard drive

  Window 7 is able to detect my external hard drive under devices and printers, it is able to detect the hard drive, and there is no problem for her.  but only shows no not my external hard drive under my computer icon so I can't drag files

  
  How can I find the hard drive and put the files?
  
  Thank you

  OK follow the instructions;

  • Click the windows icon
  • Right click on computer > then click on scabies
  • on the left, under storage, click Disk Management

  now the hard tip. You must identify which is your external hard drive. It should say something like disc 1 - online (if you have other removable things such as memory card readers may be something like disk5). DO NOT TOUCH DISK 0 (c) because it is your operating system and nothing change may / will kill the system.

  It doesn't have a letter from dirve allocated on the external drive then left and right click then click on change drive letter and paths.

  Assign a new letter perhaps something like L: as who should enter into conflict with what it is then ok the windows... it should now appear.

  Yet once just to reiterate do not assign c: or touch disk 0. you have been warned.

  Here is a link with pretty pictures to help you a bit

  The most difficult part is to find what is your hard drive. Good luck. If you're worried you can take a screenshot of the management of the computer and upload it to your skydrive. We would advise you that it is.

  Hope that helps...

  Free Support Tools

• ESXi 5.5 U1 does not detect to install local drives on HP DL380 G7 during

  Hello

  I am new to testing with vmware ESXi 5.5.

  I did an instalation on the old server (DL380 G5), which was fine (I didn't add drivers to monitor health P400 control).

  I'm now trying to intall ESXi 5.5. U1 on HP DL380 G7 with HP Smart Array P410i controller and attached is a HP StorageWorks NAS too.

  I'm having a problem where my local drives are not detected during installation. NAS logical drives are detected.

  The processor is E5620.

  I first tried with the image not specified for HP, then also that I found good site HP, two ESX 5.5 U1. Same behavior.

  I have still a start-up Win 2 K 3 R2 on the server and the array controller works fine, there are 3 SAS RAID1 + spare drives. A logical drive.

  I updated FW P410i version 6.00 - 2. I ran 8.7 B PSP update which can be updated. Still no effect. I even tested it on its host (without updateing) 2nd future cluster, but it does the same thing.

  I pressume I do something wrong maybe, because it detects old Array P400 controllers on other places, so should it also the new.

  Can't really change the controller of Bay physically, as I do remotely.

  Tips are welcome. If more information is needed, I'll be happy to add it.

  Thank you

  Karl

  I don't know why... but the local drive was there, it was only listed as a remote control.

• Equium A80 - BIOS does not detect new CD/DVD drive

  Hello

  I had to change a DVD player in my laptop Equium A80 earlier and now have problems using the restore DVD to my laptop to factory settings. I updated the BIOS with the latest version available, but the BIOS is still not able to see the DVD player, so does not start a restore. The DVD is fine once Windows has loaded and works very well on another PC under BIOS. I tried another DVD drive on the laptop, but he is unable to see anyone.

  Anyone have any ideas on what I can try?

  Thank you!

  Hi mate,

  First of all the CD/DVD drive must be recognized in the BIOS that you can boot from the CD/DVD drive. Otherwise it of not possible to boot from the Toshiba recovery disc.

  What is the type of the old/new CD/DVD drive?

  The user manual contains a list of compatible drives. It appears here? The fact is that not all drives are compatible with all laptops.

• laptop Envy 17 17-j034ca: can not detect the usb flash drives

  Hi, I recently installed windows 7 64 bit on my computer laptop envy 17 17-j034ca. Then, I managed to install all the drivers but it still doesn't detect usb flash drives and I tried to install from the web site of HP and my config but it still does not work

  Please help me

  

  It's ok my sound suddenly computer detects the flash drives normally

• Hardware changes not detected using a flash drive, the missing, system restore points tried every fix that MS can offer in Windows 7

  All of a sudden, I have several problems with my computer.  I can't not computer to recognize a flash drive.  Printer works in the same usb port.  I used Device Manager, checked the drivers, made every difficulty that MS has to offer, each difficulty that Dell can offer, but the problem remains.  I don't feel uncomfortable so I don't have to play with the registry.  I uninstalled the drivers and rebooted.  The only changes that I did before this happened was to uninstall and reinstall I-tunes.  The flash drive, I use would be defective?  When I went to the system restore, my restore points have disappeared, that was the point where I uninstalled I-tunes.  I also noticed that when I tried to detect problems with the resolution of the problems of hardware and devices, it says "material changes may not have been detected.  In detail, it also shows "there is no configured windows in a way never install driver - edition".  WHAT?  I know that windows IS configured to automatically install.  (Deep breath)

  Very well.  So I am at a loss.  Any suggestions?  Thank you very much for your time and your attention...

  Hello
   
  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing. To better understand the issue, I would like to ask you a few questions.
  1. What is the model of your Dell computer?
  2. that all measures tried on your own to fix this?
  3 have you tried to test the flash drive on another computer to see if it is faulty?
   
  This problem arises usually when the flash drive is faulty or the chipset drivers are in conflict with the USB drivers.  I recommend you to consult the following Microsoft article and check.
   
  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

   
   
  Response with all the answers, so that we can more research on the issue. Hope this information was useful.
   
  Thank you

• Equium material P200-1ED wireless not detected at all...

  Hello

  You have a problem with my parents computer laptop and I cannot for the life of understand me.

  The wireless on the laptop disappeared completely. It was working fine last night and since then to turn it on this morning, it didn't work. The are no wireless connection in the Connections window and in the Device Manager, nothing is found. Windows is not saying there is a material must be installed and I can't find the drivers to uninstall.

  I tried to install the latest drivers and still nothing was found. Few at the front of the laptop to turn on the wireless or disable control IT. By pressing fn and F8 (the wireless function key) does nothing no more.

  , Someone has any idea how to solve this problem? Any help will be greatly appreciated.

  Thank you very much.

  Hello

  If WLAN adapter is not listed in Device Manager, it means malfunction wlan. The best way to check whether it is hardware or software/driver associated is to restore the settings from the factory with a recovery disk. If she did not always appear, you must contact the service center for repair or buy the usb wifi dongle.

• Satellite L300 can not detect the CD/DVD drive

  Hi all!!

  I hope someone can help! My laptop can't find my CD/DVD-rom device.
  I haven't done anything with it, have not installed all the software and Device Manger shows:
  The device cannot be charged - when I want to update the driver - check systems and the driver is the most recent?

  When I de - activate and it the system will find the same driver. But no CD DVD device.
  TSST corp CDDVDW TS-L633A

  What can I do to get access to this new?
  Thank you!

  Hello

  What operating system do you use?
  What is the status of the optical disc drive in Device Manager?
  I assume that the drive is not displayed in windows Explorer. Can you confirm this?

• has not detected one or more drives during post

  drive onboard sata hard

  Hi ednelsonYY,

  ·         Are you able to boot to the desktop?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the computer?

  Check in the BIOS if the hard disk is detected or not. Make sure that the hard drive is set as the first boot device.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If you don't know not to change BIOS settings you suggest to contact the computer manufacturer for more help and information.

• Connectivity USB not detected at all on 1132 MFP

  Hello, I'm trying to understand this... the 1132 MFP turns on and works as a copier but it is not at all detected

  via a USB connection. Plug and unplug the USB cable do not produce any reaction from the PC either.

  I have replaced several USB cables, change of the USB ports on my computer nothing happens.

  Everyone is in a similar situation?

  I think the USB module is turned on the printer, but any feedback is much appreciated!

  Thank you

  Hi bleduri,

  I can't wait to hear that you have questions.  What is the exact model of the (M1132 MFP Laserjet, Deskjet) printer?  Given that the PC does not respond when you insert the USB it is possible that the PC port or printer is defective, but it is also possible the problem is with conflicts of USB or software related issues.  Please follow the steps in the following link to isolate if hardware is defective, other or software device conflicts are listed as being the issue. Click here

  I hope this helps!