Portege 3480CT: Multimedia - need a player software Replicator

Similar Questions

• Tecra 8000 - need DVD player software

  I have an aging Tecra 8000 running XP Pro. It came with the standard DVD player (SD - C2102) I can not read the DVD. After a brief look at the electronic manual, it seems there is a MPEG2 decoder in there somewhere for DVD playback and it came originally with a program of DVD player who took advantage of this.

  This DVD player is not on the system and just WMP plays the audio and RealPlayer not playing the ball at all.

  Any ideas?

  Hello

  I don't know if DVD software has been bundled with this Tecra8000, but this is not very serious.
  In the internet, you will find many freeware DVD player.
  The new laptops Toshiba come with a preinstalled WinDVD program.
  But you can also use other programs such as PowerDVD.
  Control the internet.

• Portege 3480CT - DVD player in those Port Replicator errors

  I have a Toshiba Portege 3480CT with an external media Port Replicator.
  The MPR has a DVD player, but I can't get the laptop to recognize DVD.
  He can see and read CDs, but I get the following error when I try to watch a DVD.
  "ASPI for Windows is not available...
  Only 32 bits supported CD rom drive... »
  The MPR recognizes that the drive is there.
  Laptop is running Windows XP SP2
  Have the BIOS update update and installed all the drivers Toshiba known.
  Can anyone help? Thank you.

  Hello

  In my opinion you need driver ASPI Google everywhere. Maybe you will find the solution for your problem. You can start with this one http://www.ncf.carleton.ca/~aa571/aspi.htm

• IBM travelstar external USB compatibility with Portege 3480CT

  Hello
  I try to use an IBM & reg travelstar in a box external usb with my Portege 3480CT running Windows 2000 (with sp4). While the disc is recognized as plug-and-play on other computers running win2k and winXP, is not recognized on my Portege, which gives an error message suggests that the drivers are missing.

  According to IBM/hitachi (which make the player), no drivers are needed and the drive should work as plug-and-play, recognized as a generic USB HDD. This happens all other computers I've tried.

  Are their compatibility problems with this drive? Or are their special all the drivers necessary to recognize this configuration on the Portege?
  Thank you
  B

  Hello

  AFAIK there is no driver required for external hard drives and they are recognized as plug-and-play. Your Portege is an old unit and there may be a problem with the USB ports. Have you checked the other USB devices?

  It is also possible that there is not enough power, and in this case, it is recommended to connect the drive using USB hub with own power supply.

  Good bye

• Portege 3480CT: Canoe DVD-> not present error message "No Disk".

  I have a Portege 3480CT (Win 98) and PA3042E - MEDIA PORT REPLICATOR 1DST. Although the DVD playback software is installed and I can't read the DVD. I tried WINDVD, POWER DVD, both for WIN 98, nothing helps. Decoder DVD software WIN 98 is also installed. If a DVD is loaded, every piece of software will return the error: "there is no disk.

  What should I do to play DVDs on my computer?

  Thank you in advance.

  Hello

  Are you using an original DVD?
  Maybe there's something wrong with the region code settings.
  If you want to play s DVD with different region the reader couldn t code recognizes the Middle!

  See also the parameter of drive letter in disk management.
  It is a port replicator, and it seems that the CD/DVD drive letter is set dynamically

• Cannot install W2K on Portege 3480CT

  On eBay, I bought a Portege 3480CT use it as a good machine to create texts out of office. But now I can not install W2K on it.

  It has an external CD drive and does not install: w2k, Linux, W98 (original)... for my favorite W2K, it says: "could not find NTLDR" (w2k) and: "media entfernen - neustart: taste druecken;

  There is no other boot device, no other disc in any location... the disc is my original one, the boot device is passed to 'boot from CD' - the system is used for W2K (there a sticker on the back, which gives me this information).

  and now I'm at the point, I have no idea how to continue.

  Is it possible to make it work again?
  Thanks in advance

  Hello

  If a "NTLDR is missing" message that this indicates that the disk is not bootable.
  Many times this is caused when the computer tries to boot from the CD-ROM or a diskette not bootable.
  In this forum, many users wanted to install the W2K on this laptop.
  First of all, you need a bootable disc.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=7187&MessageID=24896

  If you want to boot from the CD of Win98, you must first create a companion disk. See the page of the Toshiba driver for companion disk files.

  Please also see this site. Maybe this helps:
  http://www.computerhope.com/issues/ch000465.htm

• Compatible hard drives for Portege 3480CT

  Hello

  I have a Portege 3480CT and I need to replace its 12 GB (IBM & reg Travelstar) drive hard internal since the former on a developed bad blocks. Now, I assumed that it would be relatively simple, but I was wrong.

  In any case, I got a replacement 2.5 "HD (this time a Hitachi Travelstar, 20 GB drive), but I couldn't make it work. I ran the program from IBM/Hitachi diagnosis and while the old 12 GB HDD is detected and removed ok, the 20 GB does not even get detected (i.e., seems that nothing is on the line of the IDE).

  It was suggested to me by IBM and Hitachi that there is a list of compatibility to their hard drives, and may not be supported (http://www.hitachigst.com/hdd/support/compatibility.htm), but I could not find my disc on their list (model is HTS424020M9AT00). Basically, what I want to know is what drives * are * compatible or what my problem with the laptop is otherwise.

  For more info, when I try to install Win2k, I get an ArcRead failure, probably because he thinks that the drive does not exist.

  Thank you.
  Stuart

  Hello

  I guess that there is problem with drive HARD and false parameter who decide if the HARD drive is the master or slave.

  In my opinion you should contact the Service partner to ask them which HDD is suitable for your device. You can also check on the net and picking up some information because there are a lot of different suppliers where you can buy the HARD drive. I also found information that it is possible to use the 40 GB HARD drive for your unit, but it must be built in by seller.

• Portege 3480CT: Message: "non-continuous file Bios.

  I have a portege 3480CT that won't start at all (blank screen) outside of allowing me to update bios, if I try and install the bios disk I get a message saying BIOS non-continuous file?

  Hello

  I put t know what BIOS version you use, but please check if you have installed the correct version of the BIOS. As much as I know the latest version is 1.4 form 18/03/02.
  In addition, you should visit this site to verify the correct procedure of BIOS on this device:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  Please note that the bad BIOS or bad update may damage the motherboard.

  Good bye

• Hibernation on Portege 3480CT

  Hello
  I had a problem on Portege 3480CT were I have installed Win98.
  Received an error message: file not existing Hibernate.

  My Question: Use the 3480 a file to C:\ (hiberfil.sys) and how to create or a hibernation partition?
  What tool would create this partition?

  Thank you

  PHDISK is a tool that creates and activates the hibernation partition/file.
  Try to google for this tool.

  Maybe it helps a little.

  Good luck

• HD in Portege 3480CT upgrade

  I have a portege 3480CT with disc 12gig running W2k
  I run the latest version of the bios 1.4
  tried to install mk1031gas 100 GB toshiba drive but get INACCESSIBLE by CAR
  The drive works fine in a desktop pc
  It OF too big to run on this machine?
  IF this is NOT the case, how can I make it work?

  Hello

  I'm sure that the HARD drive is too big for this machine. Maybe your Portege works correctly with 20 GB but 100 GB, too. Sorry, but I think there is no way to make it work.

• Portege R600-13Z: need screen part number - UK suppliers?

  Portege R600-13Z
  Need to buy a new screen - suppliers in the United Kingdom or a reference number needed?

  Thank you very much

  Hello

  I put t know the part number, but as far as I know that you need a * 12.1 WXGA (1280 x 800) widescreen mast *.
  Generally any Widescreen Matte 12.1 WXGA (1280 x 800) should be compatible with Portege R600.

  But if you want, you can get in touch with a local ASP from Toshiba and could order such screen from guys

  Here you a discovery of a data base with all FSA worldwide:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck

• I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy _ @ _. ___

  How can I get a copy of the cd that will work with your old software. I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy to * address email is removed from the privacy *

  Hi Oscar,.

  Thanks for the post.

  It seems you are trying to download the application printer and scanner. Please answer the following questions, which will help us to guide you in the right direction.

  1. What is the brand and model of the printer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Send us more information to help you better, we will be happy to help you!

• I need a strong software to prevent messages on yahoomail spames

  I need a strong software to prevent messages on yahoomail spames

  Hi mohammedtayea,

  You can follow these links & check if it helps:

  What can I do to prevent spam?

  How to protect yourself against Spam

  Hope the helps of information.

• If you have firewall and windows defender, do you really need another security software?

  If you have firewall and windows defender, do you really need another security software?

  I have no other security software

  Norton internet security becomes awkward

  Peter

  Hello

  Yes you still need an antivirus program and you are right that Norton tends to cause problems.

  Norton Removal Tool
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  You want to remove Norton and old and even uninstalled antivirus can leave remnants then download and run
  the Norton Removal Tool. Also, I would get Avast and Prevx and you should be in good shape.

  Download the 3 to get back to after removing the McAfee antivirus.

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each.

  --------------------------------------------------------

  Here is what I use:

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html
  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I need a free software to open rar files

  I need a free software to open rar file

  I need a free software to open rar file

  http://7-zip.org