Portege 3500 - change HARD drive and deal with overheating CPU
I recently bought a Portege 3500 without any support of discs etc. It doesn't have a CD or a floppy disk. It has 2 problems, I want to trouble.
(a) HARD drive is obviously out because it is by clicking on me, and it presents a permanent red section during defragmentation.
(b) the fans are at full power all the time, and the CPU is running slowly.
(a) I had a new HARD drive that I reformatted on other laptops. I put a base Windows XP on this HARD drive and uploaded on my external that I attach to the Portege. I used "transfer... Assistant "to transfer files, folders, and settings to the new HARD drive but I don't know how to install the old Windows XP OS Tablet it." I have the product key of Microsoft for the operating system. Any suggestions would be helpful.
(b) I believe that the transfer of heat from the CPU on the radiator is a failure, causing the processor to hot and therefore slows down. I already solved the same problem with a Dell by coating the top of the CPU with Artic Silver 5 paste. I cannot, however to get the CPU in the same Portege so I removed all the screws down. Does anyone know how to split the case without causing damage?
Hello
(a) Unfortunately, but I don t really know how you want to install the operating system without using the recovery CD or the windows CD.
I searched a bit in this forum and found these messages on the installation of the OS on the Portege 3500:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5926
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15336&MessageID=55939
See also this FAQ:
http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm
(b) on the Portégé, you should find the power saver utility. This utility allows you to change the different modes of cooling and processing speed.
In my opinion, you should also check if the fans are clean. Especially the dust and debris inside of the laptop is responsible for cooling not properly of the CPU and other parts.
But if you want to know how to remove the covers so I would recommend checking this site. Maybe you'll find something useful.
http://tech.irisvista.com/laptops/Toshiba4010/portege4010_1.htm
Tags: Toshiba
Similar Questions
-
Changed HARD drive and now I can not install windows 7
I bought a new HARD drive and interlaced old, now I am trying to install windows 7 home Premium and I get an error: "Windows Setup cannot configure Windows to run on this hardware of computers.
See if it works...
Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).
Copy the files to a flash usb without all the folders drive.
With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.
After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.
You should now see the storage driver files listed.
If you check the box, it only includes the compatible driver.
Follow the prompts and I hope, will install W7.
-
Change hard drive on R60 with Windows XP Prof
Hello world
I habe a R60 with 80 GB HARD drive. It has a recovery of Windows XP Prof on that partition.
How can I replace this drive with a bigger without losing my recovery XP Prof and the Lenovo software?
Can I solve this problem with an image of the old hard drive?
Software whar can I for it?
Please read this and held is very appreciated
All CU
first mark a set of recovery media to start, program, thinkvantage, create recovery media. After having done this, then make a backup of your system using rescue and recovery software and then burn the backup to DVD or store it on an external hard drive.
Now install the new hard drive, then restore the partition recovery and BONE using disks 3 recovery media that you have created, insert disk boot disks 1 and follow invites it. After you install the new copy of the OS with the drivers, you can recharge your backup from rescue and recovery backups that you burn to DVD or stored on the external hard drive.
-
have a hp pavilion slimline s7727c. hard Dr failed. Puy in identical new WD3200aajs old. reinstalled xp pro OS instead of vista home. everything works well after update driver nvidia to the system. a realtek HD AC97 audio when new. with controller audio generic SDO installed. have tried all drivers realtek has unsuccessfully, have now no audio and the system recognizes only not the controller is installed on the card. is there a solution? as a now-defunct windows driver or file which has been in the vista system that caused his work? looking for a solution. No PCI spare parts, only a slit, which contains card Tel/fax. Thanks for the help. Bill Huff Sr
Hi billhuffsr,
Run the patch from the link below: diagnose and automatically repair audio playback problems:http://support.microsoft.com/gp/no_sound
Also, try the steps from the link below: how to fix sound problems in Windows XP:http://support.microsoft.com/kb/307918
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How to replace the internal hard drive and continue with existing Time Machine backups
I have a time Machine airport TB 3 attached to the Ethernet port on my mid-2010 MacBook Pro 7.1. It has a 1 TB internal SSD I want to use Carbon Copy Cloner to a 2 TB OWC drive. The last time I did it, I had to start my Time Machine backups.
Is it possible to find 1 the UUID the new SSD, and 2-implementation to date, some sort of Time Machine (perhaps with TMUTIL) 3 information - should allow continuity with the existing backups?
T hank you
I've not had to do this, but a lot of articles about it.
OS X Yosemite: If you want a new Mac "inherit" your backup history
http://www.creativetechsupport.com/help/it/install/TimeMachine-inherit.html
If you clone a drive, migrating from an old record, etc., these articles should give you an overview. Special attention to the second article on combining a new drive for a TM backup.
-
Wipe the hard drive and rebuild with time machine
My MacBook Pro is incredibly slow.
Can I delete it and then gradually add the files I want to Time machineYes, and what you are proposing is often the solution to the problems caused by changes in the system that are either too many, or for which there is no reliable uninstall procedure.
The following general steps:
-
Change SSD HARD drive and guarantee
Hello everyone,
First of all apologies for the bad English, but I'm low so I need to change and to translate.
I recently bought a HP Envy 15 k046nd.
He had a 1 TB of HARD drive, but I want to replace it with an SSD.
I know how to do, but before I go and replace the HARD drive, I had a question about the warranty.
I've still warranty on the laptop when I said change HARD drive myself? Or I lose it?
Thanks in advance!
Hello
Through 66, 67, Page in this manual:
http://h10032.www1.HP.com/CTG/manual/c04409752.PDFThe location of the hard drive is not much customer friendly to be found & replaced. You need to out of drive optical, cover, keyboard, USB to achieve card. I suggest you contact HP and they'll replace it for you.
Yes, if something goes wrong after / during the replacement, repair or the problems that occur due to the replacement will not be covered by warranty.
Concerning
Visruth
-
I had problems with my PC which is an old, 2003 E - business machines, I changed the hard drive and was invited to provide an activation code in order to achieve the functioning of the operating system, it is the third time that I had to do it in 2 years, a message came back to me that I could use this activation key which is Microsoft XP Home Edition... any suggestions I'm a student who can't afford to keep buying these keys to get my PC running, I have homework to fill out online... Please help
Use telephone activation, say nothing, and you will possibly connected to a human being. They should be able to sort out you.
-
I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
I have an acerDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: invalid license
Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - XY9X3 - JDXYP-6CJ97
The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
Windows product ID: 89583-OEM-7332157-00211
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0 x 00000009
Build lab: 6002.vistasp2_gdr.110617 - 0336
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F20B4B72-1308-45BE-8F90-95E91A3F0AAF} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 64 *-*-*-*-6CJ97 89583-OEM-7332157-00211 2 S-1-5-21-923204104-223683984-168055983 Acer Extensa 5630 Phoenix Technologies LTD. V1.30 20090319000000.000000 + 00070333507018400FA 0409 0409 US Mountain Standard Time(GMT-07:00) 0 3 ACRSYS ACRPRDCT 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
Installation ID: 004511331255365043724851364501374781338933223323713385
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: 6CJ97
License status: Notification
Notification reason: 0xC004F063.Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
SLIC ACRSYS ACRPRDCT
ASF! OEMID OEMTBL
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRTAh! -in this case, it is not necessary.
I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033
Open the Windows Update - click the link view updates installed on the left of the page
in the list, find the WAT update KB971033, and then uninstall it.
Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033
redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?
-
Help with Hard Drive and registry
Hey, it kinda turns out to be a long and difficult history, but I recently had a small problem that spread to a problem much bigger (and catastrophic).
I had a problem with freezxing on my laptop (HP Pavilion Dv5 with the 64-bit version of Vista I think). I've tried a few things m ais it froze just in case. Finally I found someone who said they ran a registry cleaning program and that did the trick. I tried and I had no more freezing. Unfortunately, I connected an external hard drive and all hell broke loose. It froze and I turned off the laptop. I have it turned on and was greeted with this message:
STOP: c000021a {Fatal System Error} The Session Manager failed to create protected prefixes system process terminate d unexpectedly with a status of 0x000003a (0x00000000 0x00000000). The system has been shut down.
I tried to boot in safe mode and found:
STOP: c0000218 {Registry File Failure} The registry cannot load the hive (file):\SystemRoot\system32\config\SOFTWARE or its log alternative. It is corrupt, absent, or not writable.
Then, she went and made the collection of data, and that was all. After that, I tried the boot recovery option and that never worked. I searched internet and found a few people with similar, but never the same questions. Someone, somewhere, says something about execution of system restore after having access to the menu by pressing F8 at startup. I tried. It did not work. I pressed F8 at startup upward and chose the first option. It has established a list of things to try. System Restore (and other options such as checking memory and bring up the command prompt) did not work because the C drive has been used. Large. I tried to use the disks that came with my laptop and I never once found while they were actually useful because I could never the laptop to run.
Now, I wanted to try to use the command prompt. Never really had a chance. Now, when I start the computer I'm greeted by the inspiring message of hard drive are not.
Sweet. Now, I'm a little stuck on what to try. I tried to reset the BIOS defaults and nada. I have no idea what it must try now and would love to help anyone.
I would be very happy and I thank you for your time.
It depends on how much you have to pay to get the new hard drive installed and running. Get a quote for a computer shop trust you. So I think that if the computer has been done what you wanted to do before he went wrong. If it was enough for you and the price of the repair is not too high (maybe less), I would. If the price is more than $ 200, I would start thinking about applying your money towards a new laptop computer, but that cheaper isn't always the best deal. Do some research and try some mobile friends to see if it is fast enough for you and you enjoy the feeling. Stop in some stores that display laptops and taste. Laptops with dedicated video card memory will do better with the games. If the games are starting to become important to you, consider a desktop computer instead of a laptop where you can buy a killer video card. I like the new Ivy bridge to intel for laptops so look for it. This is the new family of Intel processors. I7 Ivy bridge is the finest, then the i5, then the i3. You really need to sit with someone who knows computers and discuss your needs for the future and how you want to use your computer.
-
Redesign existing external hard disks and still 6 Lightroom able to find existing photos.
I currently store my pictures on and an external hard drive. Lightroom 6 was not able to find the picture momentarily files. I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos. I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive. However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop. I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet. I would like to turn an external hard drive on a strong letter, warns we hope this previous problem. My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo. It would take more time than I'd like to lose. Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?
I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.
Any help would be welcome.
Thank you!
So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)
Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)
-
My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.
Time Machine backup to a sparsebundle.
The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.
Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...
You has of course set the exclusion in Time Machine?
By default, Time Machine will exclude your second drive unless you have included it. Did you?
Once you get to this level during the backup, you can do a full restore manually whenever you want.
-
Can I change hard drive with an SSD in Toshiba NB100?
Can I change hard drive with an SSD in Toshiba NB100?
The hard drive in this model is the same size as SSD 2.5 drive "?Hello
As far as I know the laptop supports the disk HARD 2.5 SATA.
I think you could use a SATA SSD drive. Usually some SSDS require the firmware update but this should be provided by the manufacturers of SSD drives. -
Problem with new HARD drive and Qosmio Player installation
Hi all
I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.Thank you
ED.Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.
-
Ugggh. I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD. The integrated cd/dvd had to be taken out. I then bought a thought of superdrive, it should work. It's frozen on my iMac! Gee, who could have possibly guessed that would happen? I tried all kinds of silly workarounds, I found on the internet, but still it will not register the stack of DVDs and other discs I have.
If you're like me and upgraded your iMac that came with a cd/dvd drive internal... so he has to come out to give way to the fusion or the SSD drive, do NOT buy the apple superdrive. It will work with your computer!
Think I'll get a laptop samsung...
Ironic, isn't it? Own Apple SuperDrive will not work with Apple computers. Shame you don't check here first that we would have warned you. Return Apple overpriced and buy a nice third-party player for a third of the price. I love the LG units. You can consider a loading plate because they are more reliable, and you can use these pesky disc when you get one.
Maybe you are looking for
-
pirate mail receipt. How can I report this to Thunderbird?
My husband email account has been hacked. I contacted the ISP and changed all the passwords, but I can't understand how to send a copy of the email hacked to Thunderbird for investigation. Y at - it an address to send it to?
-
Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any proble
-
Lighting of keyboard on the Satellite L50-B-137
Hi, I own a Toshiba Satelite L50-B-137 and was wondering if it comes with a back lit keyboard function, I tried pressing FN + Z but it does nothing. If this particular laptop does not come with a back lit then is keyboard possible by making it possib
-
HP laptop - 14-ac122tu: no option to set the brightness of the screen
I recently loaded a Windows 7 64-bit OS and there seems to be no option to set the brightness of the screen. I tried in the power option and the f3 f2 keys. I tried a few things mentioned in some forums as uninstaling the monitor, but there seems to