Wipe the hard drive and rebuild with time machine

My MacBook Pro is incredibly slow.
Can I delete it and then gradually add the files I want to Time machine

Yes, and what you are proposing is often the solution to the problems caused by changes in the system that are either too many, or for which there is no reliable uninstall procedure.

The following general steps:

Tags: Notebooks

Similar Questions

  • Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the

    Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the computer.  In the process of my Lightroom program and catalog related to these images have been lost.  When I re-associate these photos with my new installation of Lightroom and a new catalogue is there a way to retrieve the keywords or other changes or metadata catalogue Mountaga?  Is any of this information embedded with the imge DNG file or was it only in the cataloght lost on my failing hard drive? I re-import just as if it were new images with no prior treatment of Lightroom?

    By default, LR saves all changes in the catalog, and that applies to any type of file.

    Optionally, you can save changes to the file as well, for raw files owners, this will create a xmp file - for DNG that changes are going to be cooked in the file, without additional xmp file.

    But it does not default. Go to the catalog and parameters under the control of metadata automatically save changes to XMP.

    Unless you do this, the changes are saved only in the catalog.

    Hope this makes things clearer.

  • Suite CS6 can be redownloaded from Adobe? Had to wipe the hard drive and all the programs went

    Suite CS6 can be redownloaded from Adobe? Had to wipe the hard drive and all the programs went

    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

    You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • Wipe the hard drive and reload Windows Vista

    I want to wipe my hard drive and then reload Windows vista business 32-bit my original cd/dvd, what is the best way to do it and what does it save before I commit to such an action. I had a series of problems with my computer and the last correction process was the Iolo System Mechanic (that should come with warnings) which managed to destroy my windows installer. should record different programs of files, etc.

    Hello

    To reinstall Vista using the recovery disk/s, you start from the 1st recovery disk and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    To reinstall from a Vista DVD from Microsoft, you change the Boot order and follow this information:

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    As it was explained to you, you need to reinstall 3rd party programs from the original media (from CD, DVD, etc.)

    And this method back up to an external hard drive your files, photos, music, documents, etc.:

    http://www.wintuts.com/how-to-backup-your-data

    See you soon.

  • I can't get my new WD external hard drive to work with Time Machine.

    My Seagate 1 TB external hard drive, connected to my Airport Extreme, use the USB port, was completed (it stores up to 3 1 iMac and MBP), so I bought a Western Digital 2 TB hard drive to replace it. I formatted correctly, connected to my MBP, then connected to the Airport Extreme. When I opened the time Machine, it didn't appear. By selecting "Set up the new TimeCapsule" open Airport utility. By clicking on the router button gave me change. By clicking on the "Record" button showed my new hard drive. The "setup" button is grayed out, unless I unchecked and double-checked all of the options. He warned me that I would be offline for a while, but it did nothing; My wife MBP and MBP my son not a never lose their connection to the internet, and I lose mine, either.

    My Mac guy, who never met a problem he couldn't fix it, is puzzled. So I am. We tried all the usual ideas, restart my MBP, restart the Airport Extreme, reformat the external hard drive, with different numbers of partitions (and Yes, I chose the GUID), but we can not simply Time Machine to connect with the hard drive. It is a Western Digital My Passport Ultra. This external hard drive is not compatible with Time Machine?

    What version is your AE? Backup is supported only on the sector of Tower model.

    You are self feeding Ultra Passport? It really must be external powered... or plugged into a powered hub.

    My passport readers have been consistent in the past... but sometimes strange things... That is, they can change the USB chip without warning, resulting in questions. The USB hub can help.

    There is also something... Plug the USB key into one of your computers and start backup TM on this... proceed very long... but we need to start... Cancel backup... and then plug it into AE and see what happens.

  • I have a dell latitude 610 laptop that I had to wipe the hard drive and reinstall windows xp pro and it does not have all the internet apps

    When I reinstalled win xp pro it didn't install any help net drivers that I can't get on internet

    If you cannot access to the use of the internet, another computer and save the driver on a CD/DVD/card reader.

    Download network drivers for Internet

    Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver and then follow the instructions to install.

    Reference Dell Driver Downloads:

    http://www.Dell.com/support/drivers

  • How partition an external hard drive and configure for Time Machine backup?

    I am a rookie just to switch to Windows Apple Mac and I'm looking to back up my new iMac with a Seagate hard drive 2 TB external.  My Mac is a 1 TB hard drive, I'm looking to partition for backup and storage.  Is this a good idea?  Is there a simple way to do it?  I appreciate any help I can get.  I also bought three years of Apple support, but I'd rather do it myself, so I thought I'd give this discussion from the community to try.  Thank you!!

    No, it isn't. Your working data and backups must be on separate drives in case one of them goes down.

    (138181)

  • I just got a new hard drive and restored from Time Machine - CS4 apps will not open. How to reinstall or upgrade the license?

    How to reinstall or upgrade my license?

    We still all drives, box and documents

    Thank you for the presentation of reports. I am pleased that you are facing up and running.

    Guinot

  • I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

    Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

    I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

    I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

    Any help would be welcome.

    Thank you!

    So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

    Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

    Adobe Lightroom - find moved or missing folders and files

  • I had to wipe my hard drive and reinstall the system. Now Adobe seems not to have an account of my purchased program.

    I had to wipe my hard drive and reinstall my system ios. I logged into Adobe After to get my programs, but they have no record of buy me something with them. How can I reinstall my programs?

    you just need your order number and the installation files.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!

    Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!  Gee, who could have possibly guessed that would happen?  I tried all kinds of silly workarounds, I found on the internet, but still it will not register the stack of DVDs and other discs I have.

    If you're like me and upgraded your iMac that came with a cd/dvd drive internal... so he has to come out to give way to the fusion or the SSD drive, do NOT buy the apple superdrive.  It will work with your computer!

    Think I'll get a laptop samsung...

    Ironic, isn't it? Own Apple SuperDrive will not work with Apple computers. Shame you don't check here first that we would have warned you. Return Apple overpriced and buy a nice third-party player for a third of the price. I love the LG units. You can consider a loading plate because they are more reliable, and you can use these pesky disc when you get one.

  • came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

    original title: lack of games
    I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

    I have no games. No solitaire, Minesweeper, no nothing.
    How can I, without seeking to erase and reinstall again?

    To activate the built-in Windows 7 games:

    1. click on Start (lower-left) and then on Control Panel.

    2. click on programs and features.

    3. on the left side of the screen, click on 'Windows turn features on or off".

    4. find the entry called games & check the box next to it.

    5. click on OK.

    6 reset.

    If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

  • My Clickfree automatic backup drive has stopped working, with my iMac, what is the best replacement to use with Time machine

    My Clickfree automatic backup drive I had for many years stopped working with my iMac, what is the best replacement to use with Time Machine.

    I can't even reformat the drive to try to start over, then think its time I invested in a high today but don't know where start looking so any advise would be a great help.

    Thank you guys

    A lot of users on these forums recommend OWC (www.macsales.com) Mercury Elite Pro series JEP due to their durability, affordability and quality of construction. I have about 6 of them connected to my iMac and have never had a speaker to fail. When a hard drive fails, substitute is a 5-minute process to re - use the box. To help you get started, you can find the line to: https://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

    You can find them in various ways and with a variety of configurations of connection so you can find the one that best fits your needs.

    Good luck!

  • Repair shop wiped the hard drive and gave the wrong version of XP

    I have an Acer Aspire one model ZG5, which came with XP home. While still under warranty, the pad has stopped working and would then start is more upward. I sent it in for repair, they wiped the hard drive and fixed my problems. Except, instead of reinstalling XP Home Edition, XP Professional installed. I can't use my computer without first professional activator, which I just can't do it, and I don't have a version of the House that I can install myself. I wouldn't rather to pirate a copy, but I'm not sure how to get a copy of the House, I already bought once and do not feel that I should buy it a second time. How could I go solve this?

    Back to whom you have sent your computer for repair and request that they make good (on) copy of Windows back or give you a license key valid for the version that they installed.

  • I have a winsock error, so IE won't connect, even though it says I have full signal. If I format the hard drive and reinstall xp it will fix the problem?

    Winsock error

    Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you

    Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you

    Check that your antivirus (all-in-one suite If you have one) is not turn off your network traffic.

    Note the devices installed in the machine.  Use this information to download the latest version of the drivers and software for the manufacturer's Web site features (on another machine and store on an external support, I suppose, would be the only way for you to do.)

    Uninstall the software/drivers for network devices.  Turn it back on.  Even if pilots are found/installed automatically, manually update the drivers & software using the files you downloaded earlier.

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    Open a command prompt and run the commands following one at a time (after each ENTRY) without leaving the part through if somehting started working...  Note all errors and post them here.

    netsh winsock reset catalog
    ipconfig / renew
    ipconfig/flushdns
    ARP d *.
    nbtstat - RR

Maybe you are looking for