Portege 3500 modules - 512MB memory lead to error

Similar Questions

• Portege 3500 - common module installation does not work

  I have a Portege 3500, I downloaded the good common module for this model I decompress a common model, click setup.exe and nothing is happen

  I think Kouros with hourglass and nothing no configuration.

  Hello

  I checked the page European of Toshiba and found protégé 3500 common Modules for deposited XP edition version 5.04.00TE

  All must be downloaded first, then extract it and then run the setup.exe file.

  In many cases you won't see anything on the screen because the complete procedure of installation is running in the background.
  However, I recommend to download again, unzip properly, and then repeat the installation.

  Good bye

• Portege 3500 - installation of the OS

  The operating system on my laptop is corrupted and whenever I try to start I get the famous blue screen saying that Windows has encountered an error and stops down to avoid any data loss. I tried to connect a CD - ROM USB drive to see if I can reinstall the system Toshiba from him but the laptop does not recognize the drive. Don't know what my options are. I see a post on the installation of the local network. It has no configuration on the client, in which case, it will not work because I can't go beyond this blue screen on startup.

  A final note to say that I am currently based in Spain, even if I bought the laptop in the United Kingdom. The reason for this note is to see if I'll have to send the laptop to Toshiba here of reinstalling the operating system.

  Thank you very much in advance for your help.

  Concerning

  Fadel
  Do you have any suggestions?

  Hello

  As far as I know, Portege 3500 can be installed with recovery DVDs using just external card PC CD/DVD or Combo drive. The way is to contact some service partners and ask them if they can do it for you.

  The recovery procedure takes about 20 minutes and I think that it may not cost a lot of money.

  Good bye

• Portege 3500: missing system32 - update the BIOS?

  Hello world

  I got a Portege 3500 PIII-M 1.33 GHz, which has been infected by a virus. I tried to reinstall Windows Xp, but the SYSTEM32 file is missing or damaged.

  I downloaded the BIOS driver and tried to install it via an external CD drive, but it did not work.
  Could you please help me at all?
  I am very concerned about the situation

  Can't wait to hear from you

  Thank you

  Davide

  Hello

  I can t believe that the virus may damage the BIOS!
  I think that you have updated the BIOS with the wrong procedure.
  Have you checked the BIOS update document?

  In any case, the fault of system32 has nothing to do with the BIOS and I don t understand why you started the update of the BIOS.

  The Portege 3500 does not support an internal hard drive, and so if you want to install the operating system, you must use a compatible external PC card reader.
  I assume you are using this player to start.

  If some error messages appear during the installation, you must first format the whole HARD drive and delete all partitions and then try again to boot from the recovery CD!

• Question about the Installation of Windows XP on Portege 3500 home

  I have a second hand Portege 3500 with WXP tablet 2005 Server Pack 2 market version, but without the original disks. However, recently had a virus that did something to Prime the area on the hard disk. I have removed the virus but now get unexpected core dumps memory and system restarts when you try to connect to the internet.

  Question: can I go down a level and safely install ordinary WXP software to work around the problem or the acquisition of new version of WXP Tablet and reinstall the software to circumvent the problem of core dump?

  Installation of an operating system on this laptop, it's the hardest thing I have ever tried to do. Once start you, you will notice that there is no device boot attached to this pc. To install windows, yourself, the only options are to buy the cdrom drive for this laptop toshiba external or install via a network.

  The toshiba cdrom drive is now quite obsolete, more expensive and the external device only that the laptop starts from (I tried with the other external cdroms, DVDs, disks usb keys and hard). It seems extremely difficult to boot from lan unless you already manage it infrastructure of the company. It is possible in theory, but after 3 weeks I still hadn't thought about her.

  My solution at the end of the day was to send it to my local toshiba support center and ask them to re - install for me (he happened to have one in stock toshiba cdrom burners). I got the installation cd, so I guess you will need get these images from toshiba as well (or buy another os).

  Good luck!

• Wireless driver is not install on Portege 3500

  Tosh Portege 3500 with ' Toshiba wireless lan mini pci card.
  XP SP2 tablet Edition

  I want to upgrade the driver of 7.43.0.9 to the new site 7.63.0.9 (because I need WPA security)

  The process seems to be okay, I chose wlags48.inf, several copied files, BUT in the end, I get the message
  An error occurred during the installation of this device
  Access is denied

  I can go back to the old driver tbhe without problem

  I tried to disable the adapter and even turn it off with the switch

  I tried to do the upgrade mode safe

  Anyone has any suggestions please?

  Steve

  Hello Steve

  I'm really skeptical about WPA security, but maybe you can relate more after installing the driver successfully. Download driver driver and extract it to the new folder created somewhere on the desktop. When you start the driver installation please choose the advanced option and navigate in that order.

  As far as I know you should not choose anything just browse in the right folder. Please try again.

• How to boot from Portege 3500 - instructions

  I discovered far from starting form Toshiba Portege 3500 and laptop now mt work.
  Email me [email protected] for help

  Hello

  Thanks for the offer, but it will be nice if you can post your instructions here.
  A lot of people read this forum and this is the right place to post some useful instructions.

  Good bye

• Need drivers for Toshiba Portege 3500

  Hi I m new to the forum.

  I have the problem. I can't find t on Toshiba support drivers and utilities for this model, where can I find all this kind of software (console, saving etc..)?

  Hello!

  First of all, welcome in the forum!

  Have you searched the Web from Toshiba site? You will find all the drivers who need you for this model.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  * Archive *-Portege-online Portege 3xxx-online Portege 3500 online

  Good bye

• Portege 3500 - problems pcmcia

  Hello
  I bought a reader of external cd for my portege 3500.
  This is the original toshiba drive (connectet via a pcmcia 32-bit card and bootable)
  I run WindowsXP Tablett Edition on the tablet.

  When I plug the device in the slot pcmcia, nothing happens. (Windows Device Manager indicates also nothing new)
  Should I have all the drivers to use pcmcia devices or do I have to change something in the bios?

  The reader is 100% working, I tested it with another laptop.

  Hope you can help me
  Leon

  Look in the BIOS for a setting that allows you to switch between <->CardBus PCMCIA mode.

  Ensure that the slots are running ok in Device Manager.

  You have another PCCard you can test in the laptop?

  It is possible that the pins inside the PCMCIA slot can be bent or broken. Look in the slot with a torch and make sure that all the stems are straight.

• Installation of WXP on Portege 3500

  It is a question of a person can suffer idiots like me!
  A friend gave me a Portege 3500 without a HARD drive.
  I have one but have no manual. Looked on the Toshiba site but does not tell me how to access BIOS which is obviously a problem.

  3500 has no floppy or the HARD disk drive if the 3500 will recognize the external USB drive with disk to install XP in it? (if I can change the boot sequence?
  Do I need to burn discs of startuop XP and buy a floppy drive?
  I would be grateful if someone who can take me through the steps to get this up and running. I have a PC to burn aging if necessary.

  Thank you very much,.
  Martin to the: [email protected]

  Hello

  The fact is that not all external CD/DVD drives are supported for the start.
  You need an individual. As far as I know the compatible is a PX1055E-1NST.
  But this device only comes with a 32-bit cardbus card. This card will be recognized only in the Windows operating system.
  You need a 16-bit cardbus card. The Bios can recognize this card and you can boot from the external drive.

  Note: The pc card controller option must be set to automatic selection or CCIP compatible.

• Portege 3500: upgrading WiFi 802.11 g

  Hello

  I have a Toshiba Portege 3500 Tablet of 1.3 ghz. It comes with 802. 11 b WIFI configuration. I was told it take a MINI PCI card. Anyone know if I can switch to 802.11 g... If If have a URL

  What about Jazz

  Hello

  One of my friends has done and it works perfectly. He told me that he used the mini of Agere PCI Wireless card.

  Good bye

• Need of German recovery CD for Portege 3500

  Hello I'm looking for the Portege 3500 tablet pc recovery CD... Because mine are missing and the helpdesk told me that they do not have these CDs more :-(

  I want the German version of area. Money should not be the problem...

  I also have a legal Windows XP Tablet serial number, because I m a universitity student @msdnaa...
  My only problem is that I don't have the recovery CD...
  My system is already running, due to the installation of windows via pxe, but partitioning is not this beautiful :-) due to the installation of BACK...

  I m really looking forward to your response!

  Hello

  I kindly may I ask which service center contacted you´ve? You called a sort of hotline Toshiba or you request authorized service partner in your country?

  You can try this service partner which is in Bavaria and served with some very good service:
  http://www.IME.de/

  If they allow couldn t you can go in the global ASP Locator on the toshiba site and look for another. Usually the ASP should be able to serve with some recovery in General...

  Welcome them

• Re: Portege 3500 - part of RTC CMOS battery repalcement not.

  Hello

  My Toshiba Portege 3500 RTC CMOS battery is low as constantly lose the BIOS settings but not its standard CMOS batt then what part of repalcement don't.
  Should I use the same party as an another Toshiba laptop I can find on eBay?

  I don't want to pay £30 for a mattress of 50 p.
  Thank you

  I really wonder that you are not Google. Google says that you should use the P000331520 part number. Check it out and confirm if it is the right.

• Box Portege 3500 replacement

  Recently got a 3500 off of ebay, happy with it because it does the job I want, however, it seems a bit faded and has some damage (due to age, etc.), and I was wondering if anyone knew of anywhere to get new boxes of replacement for the portege 3500 and approximate costs. I have looked around, but can't find anything anywhere.

  Any help pointing me in the right direction would be greatly appreciated.

  Hi Daniel

  Generally, all parts can be bought from the authorized Toshiba maintainer in your country. Technicians should be able to order the original parts of the lacrosse head of Toshiba.

  Here you will find the ASP that is responsible for your country:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  So just make a call and ask for help.

  Good luck

• Portege 3500: Need a new HARD drive

  Hello

  I bought a Portege 3500 and after a few weeks of use, the hard disk or fan (safe) started to make loud noises and now every time I turn on the laptop screens toshiba rises and it happens eventually to a screen I wrote what he said below.

  I read somewhere that this means that my hard drive is over and I have to buy a new hard drive.
  Is this true and if so anyone know where I can get a drive hard because the laptop is old?

  The only one I've seen that is in stock is of about £230 and it's about the same price, I bought the laptop.
  Or is there a solution ive tried going on in all modes but it just restarts and Ive also tried to reinstall the OS using the cd but I can't in the menu option to reinstall XP.

  "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last good known Configuration to return to the most recent settings that worked.

  If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button has been activated, or if you are not sure what caused the problem, choose Start Windows normally.

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good Configuration known (your most recent settings that worked)
  Start Windows normally

  Use top and down arrow keys to move the selection of your choice.

  Seconds until Windows starts: 30 "

  Hello

  AFAIK Portege 3500 was equipped with the 40 GB IDE HDD.
  This is why you must use an IDE hard drives (not SATA).

  Now, it would be important to know what max HD size could be compatible;
  If the laptop supports 40 GB I think a 60 GB HARD drive might work too.

  I think that you should just google for some 40 GB, 60 GB hard drives, that supports the IDE!

  Best regards