Portege M700 Touch problems

Similar Questions

• How to disable the Portege M700 touch screen?

  I have a Portege M700 tablet.
  I would like to disable the installation of the touch screen on it (but not writing or drawing ability activated by the stylus).

  Is this possible?

  My friend has a M700 and it has disabled the touch screen feature, so it is possible.

  I don't know exactly how do it, check the user manual, or go to the control panel and watch in the utility of the tablet.

• Portege M700 rotation problems after the upgrade to Windows 7 64-bit

  I've upgraded to windows 7 yesterday evening on my portege m700. It is Windows 7 Pro 64 bit. I installed all the drivers in 64-bit on Toshiba page and the Windows section. Everything works perfectly except the screen does not properly rotate when in tablet mode. I can press ctrl + alt + arrow keys to rotate, and I can also use the windows Mobility Center to rotate 90 degrees at a time. I wonder what I have to do turn once engaged in tablet mode, as it did in Vista. I have the Toshiba rotation utility installed, but it doesn't seem to be something. It seems that it does not receive a signal from the screen that it was shot.

  I need it for school, so any help is GREATLY appreciated.

  Hello

  I think that there are not all 64boit drivers for Win 7 published and released for M700 and you will need to also install drivers for Vista 64-bit!

  For example:
  * Tablet PC Extension v 1.0.0.1 for Vista 64 bit Package *.
  This package installs a range of important public services.

  Utility _TOSHIBA of rotation: _ define the orientation of the screen by default as the system to be used in the transition from the PC to Tablet mode, or vice versa.

  _TOSHIBA tablet PC buttons driver: _ you can dedicate tablet buttons to perform common tasks so that you can easily use your tablet PC away from your workstation. For example, you can dedicate a button to open a program or to change the orientation of your screen.

  _TOSHIBA accelerometer utilities: _ these utilities are a set of material utilities that work with the integrated motion sensors you machine. With the accelerometer, your machine will be able to detect how you're holding it at one point. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction.

• Can I turn off Portege M700 touch screen?

  I want to be able to use the stylus to the tablet to annotate, for example, but find that I am also touch the screen with my hand.

  Is it possible to disable the finger touch screen so that only the stylus registered?

  Hi mate,

  What operating system is in question? Have you already checked if the fingertouch function can be disabled in the configuration of the Tablet? Have you even read the manual? I'm asking because it s said there that you can disable the touch function.
  I recommend to check the manual or the configuration tool for digitizing tablet.

  Welcome them
  Dennis

• How to activate the touch screen of the toshiba portege M700

  I just upgraded my toshiba portege M700 vista home premium to vista ultimate. Finger touch screen is now turned off and I can't turn it back on.

  I went to the pen devices and entry in Control Panel and the relevant tab isn't there.

  Hi Iain K,

  I suggest to install the latest drivers from the computer and check if the problem persists.
   
  For support contact Toshiba using the following link below:
   
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1927814&RPN=PPM70U&modelFilter=M700&selCategory=3&selFamily=1073768662

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Portege M700, Windows 7 and touch screen

  The Portege M700 was feature touch screen before I upgraded Vista to Windows 7. Now it does not, any more than the features of two fingers that W7 is supposed to offer. Any ideas on how to recover the touch screen feature?

  Hello

  I think that you need to install the driver for the Wacom tablet.
  The driver is placed on the page of the European driver Toshiba
  The WACOM Dual Touch driver for the integrated tablet is required to use the features of the tablet.

  There is also the Extension of Tablet PC Package.
  This package installs a range of important public services.
  Utility _TOSHIBA of rotation: _ define the orientation of the screen by default as the system to be used in the transition from the PC to Tablet mode, or vice versa.
  _TOSHIBA tablet PC buttons driver: _ you can dedicate tablet buttons to perform common tasks so that you can easily use your tablet PC away from your workstation. For example, you can dedicate a button to open a program or to change the orientation of your screen.
  _TOSHIBA accelerometer utilities: _ these utilities are a set of material utilities that work with the integrated motion sensors you machine. With the accelerometer, your machine will be able to detect how you're holding it at one point. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction.

  But all of these tools are released for Vista when perhaps they will work with Win 7 too check it!

• Problem with webcam not fixed with Vista SP1 on Portege M700

  The Vista SP1 does nothing to the failure of Vista to recognize the built-in webcam Portege M700.
  The existing forum thread mark this question as a response, despite the link to the document toshiba mentioning the error messages entirely different from those cited by those of us with problems

  I find it strange that the M700 UK wouldn't have a built in webcam; is it really true?

  Hello

  I noticed a problem with webcam in time early Vista release, but it was linked to the Vista OS stroller and was solved by SP1.

  Sorry, but another problem with webcam into the unknown for me and as far as I know internal webcam works fine also on Portege M700.

  As you already suggested the internal webcam is not available on all Portégé M700 series. Toshiba notebooks, any series, are equipped with different hardware specifications and example to the webcam internal, in the light of the webcam and internal microphone are available on some models.

  Maybe no problem with a webcam, but some Portégé M700 does not really have an internal webcam ;)

• Portege M700 - problem with Dynadock

  I can not change the resolution on a screen connected Dynadock and cannot save the display settings of all - how to fix this?

  I have a Portege M700 running Vista Professional SP1 - mainly the machine is used as a desktop replacement, connected to a screen Viewsonic 19 "wide through the Dynadock DVI - when it is connected so I have the laptop screen is off and use only the Viewsonic at a resolution of 1440 x 900. I had been bothered by the fact that whenever the resumption of the screensaver, the resolution would drop down to some lower State (I was not able to identify the dimensions he thought he was using but probably 1280 x 800, the default resolution of the internal display).

  I tried to solve this problem with the technical support level 3 without success. I thought I was smart and try to install the Intel Graphics Media Accelerator Driver update that is located on the Intel Web site (if you're just trying to install this software, Vista won't let you, but if you unzip it and manually update the drivers it works). This resulted in the connected screen Dynadock is off completely - no signal! So I uninstalled the drivers, reinstalled the drivers Intel original, but now, I have no the ability to adjust the resolution on the Dynadock login screen - and it is defaulting to something that's not going to (too broad and not high enough)!

  I lived several cycles to uninstall and reinstall the drivers for the graphics card (Mobile Intel 965 chipset) and the Dynadock; I updated the drivers Dynadock with the latest download from the website of DisplayLink, tried all sorts of drivers for the monitors associated with DisplayLink, tried several restorations system (which have all failed, which was also quite disturbing but less than an immediate concern), etc. Through all this, there is absolutely no way to choose the correct resolution of the screen through the display properties (my choices are 800 x 600, 1024 x 768 and 1280 x 800), and even simply activate an additional screen translates to nothing happens - the new settings do not stay after hitting "Accept" or "OK". I thought that I had licked when I realized that I had to uncheck "Extend to this monitor box office" to screen internal laptop - indeed I was then able to choose 1440 x 900 for the Viewsonic and everything was good, but everything came back after reboot. Of course, now when I try to repeat, I am unable to uncheck this box not more for the internal screen (well, actually, I can uncheck, but when I hit "apply" or "OK" it simply gets selected again).

  All this comes after I spent weeks trying to get this machine to work with the port replicator, which also did not work - a problem that appears to be from an incompatibility with Vista display card drivers and the port replicator (would have been nice if it sales had told me that when I bought the thing, but I digress...)

  In any case, it seems, as it is a Vista problem, I've seen this question asked of other portable devices vista and displaylink other advice, but I know it's possible to have a working reasonably OK solution since I've had one before I went and it messed up trying to work perfectly. Serves me right for spend 3 k $ on a machine and expected that it works as described, I guess. If anyone has any ideas... my next step is probably a downgrade to XP Pro, and then if that does not work, I'm tempted to break into pieces. Or, if someone's figured out how to get the port replicator to work with a M700 Vista, which is actually a better option for me...

  -Tony

  Hello Tony

  It's a very long story, but I use Portege M700 with Dynadock DVI (PA3542Y1PRP) and have no problem at all. After reading your ad I tried changing all the display options and I didn t notice something strange. It works well.

  Read your ad I see you tried to install different things and I wonder not to have so many problems. The best solution for you is to install the new OS using recovery image. Do the clean install of OS and install later Dynadock Utility 2.3 c. be careful while installation is running and do not interrupt the procedure of facilities. Make sure that all software components are installed correctly.

  When you start installation Dynadock Utility Dynacock can not be connected. When you see the window where you will be asked to connect Audio device USB connect the Dynadock to the USB port of your favorite. I use the USB port on the back.

  I use the external display to monitor LCD 22 with a resolution of 1680 x 1050. In the settings screen is display number three and when I click on it I can set the resolution to the maximum level (native resolution). The image is perfect.

  I tried the same as you:
  -Set the external display as primary monitor (for computer laptop LCD was OFF)
  -J' have enabled screen saver and tested several times, but the resolution is always the same no changes at all the
  -With these settings, I rebooted the phone several times as well as the resolution was still the same no problem at all

  After reboot, I can see the image on the notebook LCD only, to the point where I have to write the password that I can see the same image on laptop LCD and external monitor. A few seconds later, the image is switched on external monitor only and it is the same thing you want to have. The resolution is the same again (native resolution). No change at all and all seems OK.

  At the end I've switched back to the LCD display only. It is also interesting to procedure. As a first step, you click on display number one and activate extended desktop. After that, you will be able to use the option to change the primary monitor. A little strange to me, but OK.

  So everything works well for me and for you I only see an option. Reinstall Vista, install new utility Dynadock (new installations) and test again.
  One last thing: do not connect Dynadock on different USB ports. Use always the same.

  Bye and good luck!

• Portege M700 - protection of HARD drive problem

  Hello world

  I searched the net for a full day now try to find answers to this.
  Note, I am an accountant and not a computer geek.

  I have a laptop Portege M700. I am updating from Vista to Win7.

  Here's the problem:
  -Initially tried to uninstall Toshiba HDD Protection via Control Panel and got the message error "internal error 2753 setupftc.exe.
  -Then searched the Internet and realized that I had to stop the service first. Note that I does NOT initially stop the service in the Service Manager.
  -Now went in the Service Manager to seek Protection of HARD drive and it is not at all.
  -Returned east to configuration-Toshiba HDD Protection Panel is listed as a program. It will not always uninstall it... the activiates Assistant uninstaller, and after a few seconds, he simply says the same error message is ' «internal error 2753 setupftc.exe»»

  -a search on the internet about this error does no useful result. They underline that the registry cleaner programs. I have NOT installed the registry cleaners.

  - then I went to the registry and created a backup of the registry.
  Then tried all the items containing 'HDD Protection' and started deleting them hoping that it would work.
  Then I tried to uninstall.
  The computer popped up a message stating that a restart is required.
  Tried to restart and got a blue screen.
  Then restared in safemode, reloaded the old registry file and VOILA the computer is back to normal again.

  BUT...
  I can not even uninstall HDD Protection. Get the same bloody error.

  -then downloaded the site Web of TOSHIBA HDD Protection file.
  Try to install this file... I get the same error, i.e. "internal error 2753 setuptfc.exe.

  Ok.. now, I'm ready to give up.

  Really, I didn't wipe my comptuer clean to do a fresh install, because it's such a big hassle. And I'm an accountant, not a computer expert so I don't know what to do for a new installation.
  For the time I've wasted on this already, I probably just to find instructions on the net and then made a complete new installation.

  All the advice to fix it, pleeeeeeeeeeeease! : ??

  Thank you.

  So clean Toshiba HDD protection tool didn't help installation then some registry entries must be screwed to the top.
  Believe me, best you can do is to install the OS to aid installation of HARD - disc of recovery http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm recovery mode or use if you have a.
  After a clean install of Vista, everything will work correctly, and then you can start with the Win7 upgrade procedure.

• Portege M700 with Windows7 / problem with assignment of the tablet buttons

  Hello

  After the upgrade of my Portege M700 Windows 7, most of the hardware seems to work.

  One exception are the tablet buttons to adjust the orientation of the screen, or to be used as replacement of slider. When changing the mode of the Tablet (e.g. for the entry of notes during a meeting) the original installation (VISTA) offers certain functions by the buttons on the Tablet (e.g. moving cursor, new page, scroll through the pages etc.). But it seems that these buttons are predefined for some functions of windows and I don't know or find no tool to change that.

  I installed the latest version of the utilities TOSHIBA (util_tvap, value added package) but can't find any tool to affect the proper functioning of the buttons on the tablet.

  Tips how to handle this?

  Thanks in advance...
  Peter

  You have upgraded your Portege laptop using Toshiba upgrade kit or you have installed the clean version of Win7?
  Usually, when you perform the upgrade using the Toshiba upgrade and upgrade pre-installed Vista everything should work properly.

  You also have the latest version of the BIOS?

• Problems with the Portege M700 command

  I would like to order the Portege M700-S7008 with 2.40 ghz, turbo cache + qwerty US keyboard, which is available on the site of toshiba, based in the United States.

  On my local site toshiba I can only find Portege M700-10O (which no a 2.20 ghz, turbo cache, BE-azerty keyboard), which is certainly not what I want. But the US site has no option to ship international.

  What should I do?

  Hello

  the fact is that the machine with the desired configuration is only available in America. Since Toshiba sells for all countries separate the configurations you have only 2 options:

  1. find a Distributor on google which could help you and sell / send you the machine with THIS configuration

  2. or you can wait some time with obtainig of this machine, maybe toshiba europe will give an offer that you need in a few weeks. Usually (AFAIK) Toshiba europe is not always parallel with their services and offers as other countries. This also applies to other countries such as the Australia, the Canada or Britain.
  I think that little patience and you will get what you want or need.

  Welcome them

• Portege M700-130 + Portreplicator + external display

  Hello

  We have a Portege M700-130 with the PA3508E-1PRP portreplicator and have a problem with the external display (monitor) connected to the portreplicator.
  The OS is Vista Business. The external monitor is an EIZO S2401WE-GY.

  Now the question:
  * Can you just place your Portege in the portreplicator, start it with the key to the portreplicator and get an image on the external monitor to the connection of the operating system image without doing anything on your laptop? *
  It would already help us if someone with the Portege even and a portreplicator can give us his experience about it.

  Because we can't, but we have absolut want to achieve or better should. We have tested all the settings in the power and hardware configuration options. The point is: when the Portege gets started without portreplicator and is remplace replaced offshore in the portreplicator, then began with the portreplicator the external monitor goes black when loading of the connection of the operating system image. Only after that the laptop screen is fliped open, we get an image on the external monitor.

  Help or an answer, I'd be very appreciated. Thanks in advance!

  Hello

  One of my friends has tested this on the Portege M700 Vista OS.
  It connected the external monitor using a VGA (analog) and DVI port.

  It seems that it works as you suggest in your ad.
  The Portege lid is closed and connected to the external monitor.
  You do not need to touch the Portege M700. He should start by pressing the key of the duplicator.

  Welcome them

• Re: Inaccurate cursor when using the stylus on Portege M700 Tablet mode

  Hello

  I was struggling with my stylus for a few months. When I use it, the cursor is just the tip, when I'm in the corners (where the calibration takes place). More central that I get on the screen, more it is. We're talking about half a centimeter, which does not seem a lot, but that can be a real pain if you try to write or draw on the screen.
  The tragic part is that it started AFTER I used the tool of calibration for the first time. If I had known that it makes things worse, I would not have touched him.
  My question is: is there anyone out there with the same problem, or is it unique? If this is the case, I'll have a conversation with my dealer after I go home.

  If it is not unique, how this was dealt with?

  My laptop is a Portege M700, with Windows Vista Business SP1. This issue has been consistent through all kinds of situations, hardware configurations and software content, and the starting point was obviously the calibration.
  I thank in advance anyone who can shed some light on this for me.

  Best,
  Oliver

  You're calibrating with the stylus on an angle?

  Try it with the completely vertical stylus.

• Portege M700 - random lines are displayed when I write

  A few months ago, I bought a Portege M700 tablet PC for school. It works fine all this time and I was in love. A problem started well this morning.

  When I wrote there would be random lines from off the letters that make it difficult to read. After some tests, I realized that it seems to be like the screen was stuck back somehow. What happens is, I'll write something and after that I raised the pen he will continue to write for a little bit after. I think that the screen is stuck is because the most difficult I have support to write more he will continue to write even if the pen does not touch on the screen.

  Does anyone else have this problem? Any ideas on how I can fix this? Thanks for any help.

  Try to calibrate the screen.
  If you use the writing system then check if you have enough system resources free for it.
  I have problem with some 3rd party programs for writing (for example paragon penreader - write anywhere on the screen).
  This problem was with programs that is too resourses of system for his work and the recognition and the same drawing a line has been very slow.
  If you have some non-standard programs for writing that I recommend uninstalling and check again.

  And try to remember what software install you in the last week or two at the start of this problem ;)

• "Insert system disk" message at boot Portege M700

  Hi all

  my friend give me his old toshiba Portege M700 and I have a problem with it.

  When he starts just shows toshiba logo and then it "Please insert system disk and press any key when ready.

  I do not have any disk where can I download the iso and then burn it to disc or something like that, I don't know really much about PCs and sorry for my bad English, please help me if someone can

  Thank you very much

  Hello

  Unfortunately, it is not possible to download the image of Toshiba.
  Where you n t have recovery disc for your model mobile, visit this page to order this disc: http://backupmedia.toshiba.eu/landing.aspx
  But I don't very well if you'll be able to order the disc because of the age of the laptop of m

  However, the message: insert the disk system is displayed because the system is not installed on the Toshiba Portege laptop, that's why it asks for the disc.

  Of course, you can use the clean Microsoft Windows disk to install the system, the essential drivers are available on the page of the driver Toshiba UE Toshiba image is not necessary to reinstall the system, if you are the owner of a MS Windows disc