The Vista SP1 installation problems. 0xc0190036 error code

Similar Questions

• NET Framework 1.1 SP1 installation fails. Error code: 0x66A. 867460 reference

  Why the NET Framework 1.1 SP1 install fails everytime I try? Error code: 0x66A. 867460 reference

  It downloads, but the installation fails.

  I have latest updates installed.

  See: http://social.answers.microsoft.com/Forums/en/vistawu/thread/0ffda4f1-4a9f-426a-94f4-4d6bd92ec2e2

  66A: he cannot find the files of origin or something of memory, setting is corrupted.

  You can simply fix Framework 1.1

  TaurArian [MVP] 2005-2011 - Update Services

• Windows vista sp1 installation problem

  Hi, I downloaded windows vista sp1 and at the end of the installation, it fails and says pass (http://go.microsoft.com/fwlink/?LinkId=69157) that is not valid. My windows update cannot also instal or download it too. My laptop is a sony vgn-sz433N/B and I have this problem even after full recovery my pc. Please tell me what to do?

  Hi esakhani,

  Thanks for posting your question.

  Due to Windows Update, you can try running a Fixit tool from the link below:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  After you run the Fixit, in order to install Service Pack 1, you can follow the procedure:
  -Download and install the latest Windows Update Agent:
  http://support.Microsoft.com/kb/946928

  -Run the computer system preparation tool.
  http://support.Microsoft.com/kb/947821

  -Download the stand-alone package for the Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  -Turn the computer in clean boot mode.
  Disabling/uninstalling security software installed on the computer, as appropriate.
  -Launch the installation of the stand-alone package of SP 1 to the clean boot.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista sp2 installation failure, 80010108 error code

  According to the instruction of windows update that I tried to install vista sp2 KB948465 but result each time showed 'not installed, returning from changes', error code 80010108.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation problem. Error code: A12E1

  Hi, I am currently open my Adobe Application Manager and install a new application. Currently, I installed Photoshop, InDesign and Illustrator. Now when I get a reading of the message: "sorry, there seems to be a problem with the installation process (error Code: A12E1) 'any help woul dbe much appreciated, thank you."

  Nick J.

  http://forums.Adobe.com/thread/1130012?TSTART=0

• Initialization of Adobe installation problem - 206 error code

  I downloaded creative cloud successfully, but if someone can give me please with the help, it would be greatly appreciated,

  Drewg

  Drewg 206 error indicates that the download failed.  In particular, either the connection network become unavailable or you are more able to reach download server.

  You are on a managed network?  If this isn't the case, then please try another connection.  If you are on a wireless network then try a wired connection.  If you are on a wired connection, then please try another cable.

• Error 0 x 80070002 Vista SP1 installation.

  I tried to download windows vista sp2, but before it can be installed, a windows vista SP1 must be installed first. windows vista sp1 installation cannot proceed this error OX8007002 beak. pls help me what should I do now because there is no more support for windows vista sp1?

  original title: problems with my Windows Vista

  Hi Czarihm,

  You can try these steps and see if it helps.

  Method 1:

  You can read the following article to run the system update readiness tool and check if you can install Vista SP1.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Method 2:

  After you run the system update tool, you can try to install the stand-alone package for Windows Vista SP1.

  How to obtain the latest Windows Vista service pack

  For more information, you can also consult the following articles:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Windows Update Error 80070002

  Hope this information is useful.

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• My camera so far not this problem and all of a sudden I saw this error in various parts of the phone and ask you to consider the problem of error code 1009

  My camera so far not this problem and all of a sudden I saw this error in various parts of the phone and ask you to consider the problem of error code 1009

  Apple ID: *.

  Did you check out this article? Seems to be linked to the AppStore and the country where you're:

  Why my iphon give me error code 1009?

• A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006

  A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006

  Error comes when you try to connect.

  -able to login in safe mode

  -J' tried regsvr32 regwizc.dll, regsvr32 licdll.dll from start-> run

  -Tried system restore

  Any other solution?

  Hello

  • What were the changes made before the issue started?
  You can check this link:
  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer
  http://support.Microsoft.com/kb/914232

• CS6 Photoshop Camera Raw 7.1 Installation failed. Error code: U44M2P7 - try to get the Camera Raw Filter for Photoshop CS6

  CS6 Photoshop Camera Raw 7.1 Installation failed. Error code: U44M2P7 - try to get the Camera Raw Filter for Photoshop CS6

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• Adobe CSXS InfrastructureCS6 Installation failed. Error code: U44M1P7 for CS6 during the exchange update

  Adobe CSXS InfrastructureCS6 Installation failed. Error code: U44M1P7 for CS6 during the exchange on Windows 7 update.

  Please advise... It seems that some programs the CS6 have day, simply not PS, I or some other needed programs for my current courses.

  Thank you

  TJR

  Try following the steps in this blog post:

  http://acrobatninja.com/2013/07/fixing-CSXS-infrastructure-update.html

• Reinstall the Vista SP1

  I recently deleted windows vista important configuration files with antivirus software.

  I'm sure that reinstall Vista SP1 will fix this problem, a similar problem was actually caused by SP1 during its beta testing phase.

  My PC is a HP laptop with a recovery disk, so I can't fix the reader without restoring the State of the plant and the deletion of all personal information.

  SP1 came pre-installed on my PC, so I don't know how to uninstall it.

  I downloaded the Vista SP1 and tried to install it, but it tells me "SP1 is already installed.

  I also tried to install Vista SP2 beta, but installation did not complete.

  How do I uninstall SP1 on my PC so I can reinstall it manually?

  First of all, I need to know, what is the problem that you have after you have removed the configuration with the antivirus files?  If you know the name of the file it would be useful also.  Please follow these steps to make sure that SP1 is still intact on your system

  http://support.Microsoft.com/kb/959064

  How can you know if SP1 Is installed?

  1.	Click, and then right click on computer.
  2.	Click on Properties . Service Pack 1 appears in the Windows edition section.

  If this is the case, use these steps to try to uninstall SP1:

  How can I remove SP1?

  1.	Click on, and then type programs and features .
  2.	Click on programs and features.
  3.	In the pane tasks , click view installed updates .
  4.	Click to select Service Pack for Microsoft Windows (KB936330).
  5.	Click the Uninstall button.
  6.	Follow the on-screen instructions to uninstall SP1. After the uninstallation is complete cleaning, other activities are performed in the background for the next hour. Do not try to reinstall SP1 until additional cleanup activities have finished.

• Windows could not create an installation folder. Error code: 0x80070005

  I bought Windows 7 Ultimate and tried to install it.  I hit "custom" install because I wanted to start over completely and got this error message.

  Try these suggestions:

  Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:

  Reset permissions

  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.

  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f

  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f

  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f

  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f

  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f

  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f

  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================

  Completed @Echo.

  @Echo =========================

  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade. You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.

  BTW, for your references, I found similar questions:

  Windows could not create a required installation folder. Error code: 0x80070005

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/d04e9cf3-3eae-4A1F-a9f8-e2c5ed88d183/

  "Cannot create file" error when you try to install Windows 7

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/3621e8cf-B2CE-479b-BEAC-08acc435a856

  Error 0 x 80070005 when upgrading to windows 7 from vista

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/08986904-c822-4801-95a5-55ddd5aadcea/

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/cb679e27-f2e6-4CD5-b708-a4992cec5a9d

  CREDIT: Dale Qiao Microsoft, host and cdobbs

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.