Portege R200 - XP not recognize hardware

Similar Questions

• Portege 7220 does not recognize the Extension of memory (Kingston)

  Hello

  Recently, I wanted to update my old notebook, Portege 7220 with a 256 MB Stick of Kingston Ram. According to their website, it should work, but the machine does not recognize the memory at all. (just using internal 64 MB).

  I can't upgrade the Bios either, because when I press F12 when the computer starts, it cannot read the floppy drive in the docking station. Do I need a USB floppy drive for that? I tried with a usb key, but it does not work. is there a possibility to redo an update of windows? (Comp running Windows 2000)

  Thanks for your help, much apprechiated.

  Rawnonymous

  > I can't upgrade the Bios either, because when I press F12 when the computer starts, it cannot read the floppy drive in the docking station. Do I need a USB floppy drive for that? I tried with a USB but that doesn't work. Isn't there a possibility to do a windows update? (Comp running Windows 2000)

  Only the TRAD of the BIOS version exists for this Portege.
  This means that you will not be able to update the Windows operating system running, but you will need an external floppy drive to perform these updates.

  Regarding your problem of memory;
  Check this box:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5388&ft=m&St=3

  You can find the compatible memory module. It s a PC100 144 pin SODIMM.

  Maybe you used the not-entirely-compatible module or the module is defective

• Portege 7200 does not recognize external memory

  I downloaded Windows XP on my 7200 Portege (with 256 MB external memory) and it worked fine. All of a sudden it started overheating and has been extremely slow. I reformatted the drive, downloaded XP again and it seems to work well, although slowly;

  However, he refuses to acknowledge the external memory and seems to work with internal memory of 64 MB only.
  Is this a problem of port external memory (hardware) or I can do something to fix this?

  Hello

  You suggested also that the laptop started to overheat.
  As far as I know it is possible that the cooling modules cannot cool the CPU and then the CPU does not work with maximum efficiency.
  You should check you cooling grids for dust and debris.
  You can try to use the vacuum cleaner to clean the fans. But be careful.

  The second possibility is a dysfunction of memory modules.
  Try to test with another.

• USB ports do not recognize hardware

  I have a desktop running Windows XP and a few months ago he suddenly stopped to recognize the external hardware on 2 of the 4 USB ports.  The two other USB ports work.  Is this a software problem or could the two USB port went bad at the same time?  I plugged a USB stick in the USB work and it does not work, but the mouse I reconnect works very well.  This same USB works on another system.  I'm puzzled.

  Thanks for your help!

  I have a desktop running Windows XP and a few months ago he suddenly stopped to recognize the external hardware on 2 of the 4 USB ports.  The two other USB ports work.  Is this a software problem or could the two USB port went bad at the same time?  I plugged a USB stick in the USB work and it does not work, but the mouse I reconnect works very well.  This same USB works on another system.  I'm puzzled.

  Thanks for your help!

  If some ports work and others do not, it is most likely a hardware problem, not a Windows.

• Portege R400 - does not recognize 3g module?

  Please help: I got my new Toshiba Portege R400 (PPR40E-00T018G3). I knew that some of the R400 is module 3g, but I could not know if my has a or not because there was nothing on the box or it will show or not (except that on the screen Toshiba Edge 3g icon is always with a triangle below? I assumed that it was because he has no SIM card...), but when I was upgrading memory I noticed that under a keyboard (where is a memory slot) is also a SIM card reader, so I assume that my R400 is equipped with 3g module (why they would put SIM card without 3g module reader?).

  I saw no devices in Device Manager in windows, but I thought that when I put the SIM card, it would install itself (I also did not notice a bluetooth until I installed it later!), but when I put the SIM card, nothing happened - indicator 3g is still off, and I have no new devices in Device Manager. Of course, I installed all the software that was on the page of drivers toshiba r400: Wi - Fi broadband Mobile (Novatel), 3 G RF Power Control Utility and MobiLink, but I have not had any indication that the 3g module is, and when I opened Configfree on dial-up/WWAN, he says: not availible. Mobi link says that there is no device. When I press fn + F8, I get only icons bluetooth and wifi, not 3g. OS is Vista Ultimate Edition and Windows 7.

  My questions are:

  1. is it possible that my R400 (PPR40E-00T018G3) doesn't have a 3 g module, although it has SIM card reader?

  2. for users of R400, you had some indications that your 3 g module exists (i.e., devie Manager etc.) before set you up the SIM card? Or he was dead, and when you put the SIM card he moved.

  3. what drivers did you use and how do you control the connection options?

  Need help please with some info, I read all the posts on the forum about R400 and 3g, but found no solutions. I have seen that some users have their 3g modules R400 works, and ask them for help.

  Thanks in advance!

  > 1. Is it possible that my R400 (PPR40E-00T018G3) doesn't have a 3g module, although it has SIM card reader?

  It is correct.
  Some R400 were equipped with module 3G and some don t support such module.
  Your R400 PPR40E-00T018G3 was not equipped with the 3G module and so it may not be recognized.

  See you soon

• Vista does not recognize hardware Palm Centro

  I downloaded from the internet as well as my drive Centro (Verizon) Smartphone software required, and when I come to the stage to connect the phone to the computer, all I get is not found in device drivers.  I got it doing a search for the drivers, nothing works.  This phone drivers had no problem with my XP computer.  Any ideas?

  64 bit, I was able to Hot Sync via Bluetooth.  I might have to wait until they develop better drivers for 64-bit?

  Message relates to: Centro (Verizon)

• Portege R200: Sound does not work on the modem

  Does anyone have any suggestions on how I can get sound of my modem?

  I have a laptop Toshiba Portege R200 with Win XP Version 2002 SP2 with a Toshiba Software modem on COM3. When I dial a number with the modem there is no sound, even if the modem work and connect to my server.

  · The sound works for other applications and Windows itself, so I know the speakers work.
  · I moved my hard drive on another laptop and had the same problem, so I know that it's a software issue and not a hardware problem.
  · In Control Panel sounds and peripheral Audio, the volume is set to high and the Volume, phone, Mono control Out and other volume settings are all rich.
  · In the modems Control Panel Options and the modem speaker volume is set to high
  · In the properties of the Modem, it indicates that the device is working properly
  · Through HyperTerminal, I sent the AT & F, ATM2 and ATL3 commands to be sure, has everything been settled properly (and the answer to all was OK)

  Someone at - it see this problem with the modem doesn't do not all sound? Suggestions?

  Thank you!

  Mike

  Hello

  I put t know which sound modem tell you exactly but is it so important to you?
  If the modem works correctly and you can connect to the internet, why you want to have the sound of the modem? Maybe you hear the strange sound of modem that is displayed when the modem tries to build an internet connection.

  You can try to change the numbering in help. Maybe it s in legumes and want to have the tone.
  To do this, you will need to enter in the Control Panel, and then select the modem.
  Please indicate the location on the dialing rules tab, and select Edit.

  You can then change the dial using the general tab.

  It will be useful.

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• Portege R830 PT321A - 3 G Modem driver does not recognize the device

  Hi guys,.

  I'm having a strange problem with the model PT321A - 01 K 002 concerning the driver of Modem 3 G.
  I tried all the drivers available and Wireless Manager sites Australia and European I can find and it just won't recognize hardware.

  To clarify, we deploy a fairly clean Win 7 64 bit build and at the end of the 3G modem is the only device not recognized, it is reported in the device under "unknown devices--> download software... Manager Strange, but "Software Download" is actually the name of the device.

  Hardware is * USB VID_0BDB & PID_100E ID * which, during all my reading, seems to be the 3G modem. No matter what I do, even a fresh copy empty detail of Win7 64 bit can get 3 g drivers to recognize the hardware.

  I guess that I install the drivers in the wrong order? I tried several combinations but cannot make it work! We buy more in addition to these with the component of the 3 G and I need to be able to deploy our SOE to it.

  Any advice?

  Thanks in advance! -Matt

  Hello

  Have you tried this driver:
  [Ericsson 3 G driver v 7.0.1.2 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct = 6470 selSh ortMod = 2988 & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 80743 & OSI D =-1 & driverLanguage = 42]

  Otherwise recommend that you check this 3G driver Toshiba Portal
  http://APS2.toshiba-tro.de/WLAN/?page=3gdownloads

• Portege R100: WLAN does not recognize the network

  I have a 2 year old Toshiba R100 Notebook.
  It has a wireless adapter:

  Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter

  We have tried several times and had technicians trying to connect to our WAP network office. He simply do not recognize the network and we offer all mailboxes menu to connect. It works fine on WEP networks and open.
  Our network is one: -.

  Cisco Linksys Access Point Wireless-G with SRX, model WAP54GX

  It has been suggested that I have buy a wireless card for WAP networks put in the slot of the card.

  Would you agree?

  If so, then that one would you recommend?

  Hello

  It seems that the card supports only WEP encryption and cannot handle WAP encryption that secures the WLan network.
  Fact is that encryption depends on hardware and not software. This means that if the card doesn t supports the Protocol WAP for the update of the driver will not change this situation, but only a replacement card.
  So I agree with you that the replacement card may solve your problem.

  Unfortunately, I can't give you any recommendations because I m not 100% sure what card uses the WAP protocol, but you can order the Wlan card compatible and supported by the Toshiba service partner in your country. AFAIK the guy order the Toshiba parts directly.

• Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 8. Toshiba Satalite. Windows does not recognize ethernet hardware.

  for some reason, I, ve lost my ability to connect rigid cable to my router. Laptop computer, windows 8. Toshiba Satalite.

  Windows does not recognize the hardware. How can I use add hardware without any driver?

  Troy

  Go to Toshiba, download the latest driver and install it.  It does not recognize the hardware, because the driver is damaged

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (works on win 8 & win 10)

• Portege R700 - recognition of fingerprints does not recognize my fingers

  My recognition of fingerprints has worked for a day about. Now, it does not recognize my fingers (3 registered). When I go in utility prints/utilities-Toshiba digital displays with a fingerprint window Panel, indicating that he needs my fingerprints until I have access to the control panel. It will not accept my footprint so I select to close the window and leaves the control panel.

  When I visit different websites they say it is ready (on a yellow sign) and I keep having to say cancel because I fear it will record and then leaves me not in the Web site.

  It was such a bad experience I just go into the control panel and disable. How do I do that?

  Have you tried to delete saved fingerprints fingerprints?

• Portege Z930-118 does not recognize the external USB CD/DVD drive

  My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port.

  The CD/DVD device does not even appear at all in Device Manager.

  The reader is a SE-S084 Samsun and works well on another laptop.

  I already checked for the "upper_filter", "lower_filter" with the regedit, but entries are not there, so no help.

  Hello
  I m not very well how to help you.

  I found some information about this WEIRD disc and it seems that he didn't need an external power supply. Its USB bus powered so I guess around 500mA power since it is the default value provided by a USB 2.0 port.

  I don t think that there is a problem of missing software. It is a plug n play device so you need to connect it to the USB port and the system should automatically recognise.

  From my point of view of the few you try to connect the external USB ODD two ports to aid a * Y * Cableusb.
  I think the reader needs more power provided by a single USB port.

• Portege M300: Nero 7 Premium does not recognize drive - Mat * un UJDA765

  I am unable to write through Nero 7 premium on my laptop of protected m300.
  Nero 7 premium is not all recognize the dvd/cd rw burner.
  In the drop down menu drives availble to write, only the writer of images is displayed.

  Please help, if anyone knows how to fix the problem.

  I formatted the original installed OS and newly, MS XP sp2.

  It sounds everything works correctly on your laptop computer and the operating system recognizes the drive correctly. But only the Nero application makes some problems.
  Well, it's not easy to say why Nero does not recognize the drive.
  I recommend you to check the Nero Web site.
  You will find many info and tools for additional help.
  For example the infoTool can locate the fault.
  You can also try to use the Nero driver - CleanTool.exe and RegistryChecker.exe

  However, it is a 3rd party apps and I think you should ask for help using Nero.