Portege 7200 does not recognize external memory

Similar Questions

• Portege 7220 does not recognize the Extension of memory (Kingston)

  Hello

  Recently, I wanted to update my old notebook, Portege 7220 with a 256 MB Stick of Kingston Ram. According to their website, it should work, but the machine does not recognize the memory at all. (just using internal 64 MB).

  I can't upgrade the Bios either, because when I press F12 when the computer starts, it cannot read the floppy drive in the docking station. Do I need a USB floppy drive for that? I tried with a usb key, but it does not work. is there a possibility to redo an update of windows? (Comp running Windows 2000)

  Thanks for your help, much apprechiated.

  Rawnonymous

  > I can't upgrade the Bios either, because when I press F12 when the computer starts, it cannot read the floppy drive in the docking station. Do I need a USB floppy drive for that? I tried with a USB but that doesn't work. Isn't there a possibility to do a windows update? (Comp running Windows 2000)

  Only the TRAD of the BIOS version exists for this Portege.
  This means that you will not be able to update the Windows operating system running, but you will need an external floppy drive to perform these updates.

  Regarding your problem of memory;
  Check this box:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5388&ft=m&St=3

  You can find the compatible memory module. It s a PC100 144 pin SODIMM.

  Maybe you used the not-entirely-compatible module or the module is defective

• An SD card is inserted, but my laptop Packard Bell does not recognize the memory card.

  Original title: peripheral equipment

  An SD card is inserted, but the PC (my laptop is a Packard bell) has no reaction. It does not recognize the memory card.

  Thanks for your help.
  Christine.

  Hi Stefano,

  Thanks for posting your question in the Microsoft Community.

  This problem can be caused if the SD card is damaged or the card reader may not work properly.

  1. What is the brand and model of the SD memory card?

  2. What is the number of the model of the Packard Bell laptop?

  3. you receive an error code or the message after inserting the SD card into your laptop?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  5. have you tried to insert different SD card in your laptop?

  6. have you checked the SD card in another computer?

  7. you try to connect the SD card to a built-in card reader or externally by USB port card reader?

  8. is the specific question to a SD card or any type of cards?

  9. are you able to detect the SD card in the Device Manager?

   

  Open the Device Manager:

  http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  For reference:

   

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Moto Q does not recognize the memory card

  I just added a 2 GB memory card that is approved for the Moto Q 9 M... For some reason, my phone does not recognize the memory card. In the memory section it shows the card is unknown.

  With a previous discussion, I saw, I did add the memory card on my PC. It does not recognize the card... Any ideas?

  Thank you

  Jason

  Try formatting the card on your pc and then install it on the phone. If it's 2 GB sandisk it should work fine. If the phone or the card is left. Sometimes reformat card strives to set everything right.

• Satellite C50-B-131 does not recognize external hard drive

  I used an external hard drive to back up my data. Suddenly my laptop (C50-B-131) says it does not recognize the device. Any help is welcome. I tried to uninstall and reinstall the driver for the drive.
  Thank you

  Have you tried another USB port?
  The backup drive works on another PC?

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• Vista does not recognize external hard drive (LONG!)

  I bought a Terrabite Cavalry USB Mass Storage 1 unit some time around January 2009. We used it to back up my computers portable wife and daughters without any problems (it was Windows XP a Windows Vista). Shortly after, we have tried to back up my desktop computer, also running Windows Vista, but my computer does not recognize the drive into any USB port. After this attempt, we get is more willing to work on any computer. We contacted the cavalry and they replaced the drive, but we lost a lot of data since most of the files saved on my wife and daughter desktops have been deleted to clean up their hard drives.
  When I received the spare drive I backed up my computer with no problems.
   
  We moved from NC to PA in August of last year and had packed the new car. Recently, we unpacked and used to transfer ALL the photos of my wife, numbering several hundred, again with no problems. In addition, she has saved his computer using the Vista utility. Today, I made the horrible mistake of trying to back up my computer using the same player. I had completely forgotten the previous question. Yet once, my computer did not recognize the drive, any USB port used or on the tabs 'computer '. When the drive is plugged in and turned on, it will be not even allow us to display the elements on the tab 'computer '.
   
  And now, just as before, the player no longer works on my wife's computer either. THIS IS AN ESSENTIAL QUESTION! If we cannot access the drive over 500 photos of our family, covering more than 5 years are lost forever!
   
  Although I've read similar questions on this site (especially in regards to Windows XP) I can't find the one that is exactly the same problem as this.
  There is nothing wrong with my computer. Each USB port works fine. I tried other USB devices with no problems of any kind.
   
  On both computers, if you connect the external drive and the power up it starts with a light blue on the front as it is supposed to. He then became red and Windows makes the normal audio alert, as it does with any USB device plugged. On the bar, the new icon 'Remove hardware safely', says but clicking on that alone causes the computer to get ung place intil the drive is unplugged. The same is tru if we try to access the tab "Computer" in the Start Menu. The computer attempts to load the itms 'Computer' but never the completion of the task. THE TWO COMPUTER DO EXACTLY THE SAME THING! My wife uses a Dell with Vista Home Premium and I use an EMachine with Vista Home Basic. And this issue seems to happen only after using his computer to mine, not the other way around because I had done a backup on thise drive when I got last year and she just did a new now on his own.
  I wrote to the Cavalry, but received no response. They said the last time that they aren't able to recover lost data, and it is said that all over their site.
  The external drive is a cavalry model # CAXP3701PA.
  Someone please help! Pictures of our last five years (including photos of my wife of his precious Golden Retriever from puppy to now) are lost if we cannot solve this problem. It seems that the player works well, but something corrupting of the software driver. We tried again to my wife's computer o and it begins with "Download driver software for device" but then what I described before using it.
  Any suggestions would be greatly appreciated.

  Hello

  Put the disc in a real store of the computer (not the leeks and the glances at a Best Buy or other stores)
  and they can remove the drive from the case and put it in another computer to back up data
  to other media. Of course this cancels any warranty and may not work if the drive has probably
  in fact failed. Data can often be recovered since a failed drive while it's expensive.

  (The drive could be put in either your PC as a 2nd drive).

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 does not recognize external hard drive after the reboot

  I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• W510 does not recognize HC memory cards?

  I put a Sandisk 4 gb micro SDHC into my w510, but he does not recognize the card. According to the documentation, it can support up to an 8 GB card. I can put a non - HC card and the phone think it is no problem. I tested the HC card in my computer, and it works without any problem. If the w510 can take up to an 8 GB card, it should be able to use the HC cards, shouldn't it? As I understand it, most microSD-HC is only 2 GB. Anyone else had a problem with SDHC cards in their phones?

  WarCat-

  I received the confirmation of the product team. There was a typing error in the user manual. The phone supports up to 2 GB cards. Sorry for the inconvenience. We will work to get this fixed in future textbooks W510.

  Mark

  Support Forums Manager

• Satellite L30 (PSL33E) does not recognize second memory slot

  I'm trying to upgrade a L30 for a friend. It came with 1 memory module 512 MB PC2 - 4200. I tried to add a 1 GB PC2-5300 SODIMM in the second housing and it does not pick it up. I replaced the 512 with the 1 GB and he found. Put the 512 in the second slot, still sees the 1 GB but not the 512. I tried 2 x 1 GB and he sees one of them. It reports 894MB as I guess he uses 128 MB of video memory.

  I've updated the BIOS, checked all the settings and I don't see why it woun't recognize the second memory location.

  Any ideas?

  Hello

  The second location is defective. It's the only plausible explanation

  But as far as I know Toshiba recommends the use of these modules;
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  Maybe you should test notebook with such 1 GB module to make sure this isn't a problem of compatibility of memory.

• Windows Vista does not recognize external USB 260 GB HARD drive

  I have a 260 GB Seagate external hard drive, a laptop Toshiba satellite and Windows Vista Basic.

  The same Windows usually choose the hard drive when I plug it, it does not appear in Device Manager and in disk management, the only way I can get it to work is to uninstall all the USB root hub and then restart the computer, and then reinstall the USB root hub and plug my hard drive.

  When windows finally recognizes him, the only way to find the driver must choose c:\ manually and there's the search for the computer.
  Works for the time that I have the computer hard disk, but when I stopped it, next time I use the computer, I'm having exactly the same problem.

  I tried to remove the hard drive safely and then close the computer and by him plugging back in after windows has loaded, I tired it connected from the computer and tried to close the computer with connected.

  None of these work.
  Can someone help me please?

  Strange?  :|
  But what need s say Microsoft Windows so I don't expect 100% without bug OS ;)

  Disconnect the USB HDD and remove all the USB ports and Device Manager USB controllers. After restarting again the OS should reinstall ports. Then you could try to reconnect the HARD drive.

• Mac Mini does not recognize external hard drive

  Hello!

  I have a weird question on my Mac Mini. I have two Seagate to 8 external drives connected via USB to my Mac Mini (mid-2011 with Maverics). The discs worked well, but suddenly one of them will not be recognized by the Mac Mini.

  I connected the hard drive of my MacBook Pro and an old PC and it works fine and all files are available, but for some reason, my Mac Mini will have nothing to do with her anymore.

  It does not appear in the finder or disk utility. I unplugged the hard drive for hours and then tried to plug it back without a bit of luck. I restarted the Mac Mini on several occasions. I also tried to connect it to all the USB ports on the Mac Mini. When I connect it to the USB ports, there is no whisper sound indicating that it has started working. However, no sign of it on the Mac Mini.

  It's like the Mac Mini has decided to ignore the external hard drive, no matter what I do. Seeing this works on other devices, I'm fairly certain that the problem lies in the Mac Mini.

  I'm no expert, so any help will be very valuable for me. And if you are kind to help, please explain it to me like I'm 8 or 93 years old.

  Thank you.

  Are these drives powered independently or they depend on USB power?

• FireWire and does not recognize external drive.

  I am running a Macbook Pro 10.7.5 2010. Recently my firewire port started reading randomly my WD external hard drive. When I plug it in, the light comes on to show it is powered, but no other Exchange of information is performed. It does not appear in the Finder or disk utility. While he will reveal sometimes without reason. Any ideas?

  It could be the port, the cable or the housing.  Test all three possibilities.

  As a matter of procedure, reset the SMC and the NVRAM:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Ciao.

• Stor.e TV + does not recognize external DVD

  Hello!

  I connect an external DVD / Blu - ray with a USB cable player (as suggested by the manual), but when I go to the icon of the DVD, I get the message "no changer". I plug in a Phillips bluray that seems pretty standard... Anyone who has faced this problem before or can give advice?

  Thank you!

  Hello

  You are right
  The Stor.E + can be connected to the external CD/DVD drive with a USB cable.
  To do this you must select DVD auto play option and need to fix on IT.
  Did you do that?

  Connect the DVD player via the USB cable to Stor.E TV +.
  Select setup-> system-> AutoPlay dvd and active automatic DVD playback
  Then select external DVD option in the main interface of the Store TV +.

  If this does not work, I recommend you to test the Store TV + as part of another drive to CD/DVD, but to my knowledge, there is no particular standard (of course USB 2.0 should be supported) which would be necessary

• L50-B-1VP satellite does not recognize external monitor

  I recently bought by Satellite L50-B-1VP and I have some problems to connect it to my TV.
  I tried to use an HDMI cable and a VGA cable, but nothing happens.

  The cables and the TV are ok because I've used them before.
  When I try with the HDMI, it is said; no signal detected, but using the type TV VGA cable of restarts and the screen is black. I am using Windows 7 32 bit and I tried Fn + F4 and also Windows + P.

  The problem is that the external TV is not recognized and it does not appear in the display settings.
  What can I do?

  If someone could help me I would appreciate it a lot!

  The phone is sold without a preinstalled Windows System. It seems that you have installed and configured Windows 7 at your own hand.

  Well, I guess that the problems with the video output may be related to missing drivers or a bad configuration of the system.
  From my point of few, you check some key points.

  First I would recommend you to check if the essential graphics driver has been installed.
  The laptop does not support dedicated graphics card, but the CPU (Intel N3540) provides internal GPU Intel HD Graphics.

  So I recommend you to reinstall the Intel and the Intel Chip Set Utility display driver

  Your comments would be appreciated