Portégé R700-15 q-Use the SSD as 2nd drive

Similar Questions

• What does 128 average SSD? It is upgrade-able? In what model year would be a MacBook be more or less if it's still uses the SSD?

  Please explain

  What does 128 average SSD?

  It is upgrade-able storage and at what cost to 500 GB?

  In what model year would be a MacBook be more or less if it's still uses the SSD?

  128 is the size of the available memory and SSD is the type.

• Pavilion dm4-3090se: how to use the SSD after restoration of the system of Windows backup disks?

  Hello

  After a lot of work, I finally could restore my OS using Windows backup disks that I created a few years back. (The OS has been corrupted when the power has been accidentally deleted from the system and the battery was dead)

  Restoring backup widows put everything on 444 GB C drive.  Nothing I put on the SSD drive d:-20 GB and there is nothing in the tools of HP E: drive - 4 GB

  How can I make use of the SSD drive to help speed up the system?  I see the system starts and runs more slowly now.  I'm ready to blow the current operating system and re-run the Windows backup utility.  But I need to know how to use the SSD during the restoration.

  Any help is appreciated.

  Thank you

  Bob

  Hey @llebrez,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you have some information about using the SSD in your HP Pavilion dm4 Beats Edition Entertainment Notebook. I'd be happy to help you with that.

  The SSD in your laptop is used for a technology called Intel Smart Response. Intel Smart Response uses the SSD as a type of Cache smart to help load the items faster. The reason why that is not used currently is because the restoration of the system is not designed to use the SSD for intelligent caching and is not able to establish that on its own.

  If you want to configure Intelligent caching on your laptop, you can follow this guide provided by overclock.net: how: implement the Intel Smart Response Technology (SSD caching)

  I hope this helps. If you have more questions that I'm able to answer for you, please do not hesitate to ask.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• If I use the SSD to initiate the operating system and a hard disk of data what exactly will be the benefit of this end?

  Hello

  I would like to know if I use the SSD drive for the operating system boot and a hard drive for data. What will be the benefit of this effect,

  I know that SSDS starts much more quickly and reads and writes data faster.

  When I use the SSD for OS then my only wil advantage so I have faster from the OS, not more than

  but the reading and writing data wil either by the hard drive so I wil not use all the benefits of the SSD, data wil be read and written by hard drive!

  Am I right or wrong?

  Johan

  SSD benefits for most of the time of loading, and it is for all software. If you install Windows on a SSD and return to a HARD drive after a few weeks you will certainly appreciate the value of an SSD, just for the

  only the loading.

  While startup in Windows is the most obvious, the Windows advantage is usually a bit snappier

  on an SSD.

  An SSD expected to also help in many programs such as Photoshop, video editing, the processing speeds

  or CAD, due to data being created during the writing of these programs.

  I think the reads and writes more visible with large files.

  All my programs are on the SSD, but my games are on the HARD disk.

  Games to load a large number of data and will load faster on an SSD, but it's still a few seconds.

  and as games use a lot of Go, it is not really profitable to keep (150 +) on an SSD.

  -J' I keep most of my data, except the music (to save space) in my user folder, but haven't really

  noticed a difference in speed when opening a data file, such as a Word, PDF, images, or similar

  'small' files from the HARD drive.
  -I wouldn't take an SSD less 120 GB. Try to run Windows on a 60GB translate too

  stuffing autour with management of data between the SSD and HDD. In particular, as it should be

  keep 20% an SSD free to allow the two "garbage collection" and deliver a load of

  cells of extra memory to extend the life of the DSS (data gets moved to empty cells when the cells die).

  There is also a noticeable difference between the speeds of SATA2 and SATA 3 controller, so if your motherboard uses the SATA2 more the advantage of an SSD is not as great as with SATA3.

  In addition, the new SATA3 SSD controllers are faster than those of two years ago.

  SSD is a big enough topic. There are many items in the wild that may be useful.

  .

• Portégé R700 - 14L - no HDMI sound after reformat HARD drive

  I reformatted the HD just on my Portege R700 and sound via the HDMI TV (Toshiba TV) connection stopped working - through cable. Although the Control Panel indicates the TV speaker is the audio device by default, when you connect, no sound no fate through when I use the sound test or I play any MP4 file.

  Could someone help me on how I should fix this?

  Thx a lot

  Hello

  First, I would try to update the audio driver.
  Usually the audio page of the European driver Toshiba driver should work to find, but the most recent driver is downloadable always on the chip manufacturer page
  The sound chip is Realtek to try the driver for the HD directly from pages Realtek audio Manager.

  You must uninstall it before you install the new audio driver, one installed
  After installation, do not forget that the digital output was chosen as default device
  In Control Panel-> sound-> reading tab, you can do this

• Unable to install Win 7 64 bit for the SSD, no device driver? Aurora ALX R4

  I have a Corsair Ls 60 GB SSD that i want to put my OS (OS currently on the HARD disk), iv tried to do a fresh install, but every time I do it asks me to connect a flash drive or a cd containing device drivers?

  IV looked on dell for the deployment of OS drivers, but there only those optional for monitors... I missed something really simple here?

  Sorry if this sounds vague.

  The value of the BIOS:
  SATA Mode = AHCI Mode
  = UEFI boot mode

  DVD Win7, Win-8-DVD or USB flash should start now. Use the one-time-starting F12 menu.

• Satellite M40X-112: can I use the 160 GB HARD drive

  I have a Satellite M40X-112 lapptop and I want to upgrade my 80 GB to 160 GB internal drive.
  How is know possible? (Toshiba hotline cannot give me an answer only that a 80 GB drive has been tried with these lapptop!). Anyone have experience with that?

  I read several statements here in the forum about HDD upgrade on the M40X and it seems that there is a limitation in the BIOS.
  The BISO will not recognize the 160 GB HARD drive and that is why you will be not possible to install an OS or you will not be able to boot from this device.

  Please use the "advanced search" from this forum to find discussions on upgrading the HARD drive.

• How to know the encoding of the file PCL5 generated using the HP Universal print driver

  Hello

  I generated a PCL 5 file using the HP PCL5 universal printer driver.

  While I tried to open the file using Notepad ++, the file seems to be encoded.

  How will I know the encoding used in the PCL5? Sample file is attached.

  Thanks in advance.

  >... we would like to know the type of encoding used in the PCL file.

  >> ... How can get us? It uses the EBCDIC encoding?

  There is No text, encoding, as such.

  The text (which seems to be the content of the manual 'PCL5 Comparison Guide' page) has been converted (by your player application and the printer driver) in a raster (bitmap) image.

  The print file generated contains a few sequences initialization, then (as I said) the greater part of the file is an equivalent of PCL-a Windows raster image format (in this case, the selected compression method is TIFF).

  The analysis has been produced using the PRN file analysis tool in the application of the whole PCL , available via http://www.pclparaphernalia.eu

• expand the disk error using the cmdlet set-hard drive

  Hello

  I will try to extend a vmdk with the command set-hard drive the rcli installed to my latptop througth, but I'm getting some sort of syntax error, I think.

  I connect the vCenter and can run commands very well...

  I use the following commands in the process:

  PS C:\ > get-disk hard-vm xxx_teco

  CapacityKB persistence Filename
  ----------                     -----------                                                    --------
  persistent 31457280 [brjgs163_Storage1_Local] xxx_teco/xxx_teco.vmdk
  persistent 5242880 [brjgs163_Storage1_Local] xxx_teco/xxx_teco_1.vmdk

  then:

  PS C:\ > set-hard drive - vm xxx_teco - hard drive ' [brjgs163_Storage1_Local] xxx_teco/xxx_teco_1.vmdk "-capcity 10485760

  then, got the error:

  Together-hard drive: Nao e possible associar o Parâmetro 'hard drive '. NAO e possible Converter "[brjgs163_Storage1_Local]" o valor homes don't do tipo "System.String" no type "VMware.VimAutomation.Types.HardDisk".
  Em linha:1 caractere:36 + set-hard drive - vm xxx_teco - hard disk < < < < [brjgs163_Storage1_Local] xxx_teco/xxx_teco_1.vmdk - capcity 10485760
  + CategoryInfo: InvalidArgument: (:)) [game-hard drive], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.Commands.SetHardDisk

  I have tryied somehow different to specify the disk hard but without success... always get these errors of messages...

  any help, please.

  The cmdlet Set-HDD wants something, such that returned by Get - hard drive to the hard drive setting.

  Easier is to use the pipeline (see also example 1 on the hard disk-Get help).

  get-disk hard - vm xxx_teco | where {$_.} {Name - eq ' Hard disk 2 "} | whole-disk hard-capcity 10485760

  
  

• Qosmio F30 - how to get started using the external CD/DVD drive?

  Hello Mr President

  I have a Qosmio F30. My CD/DVD drive does not work. I have the USB CD/DVD drive, but I think that F30 does not support external USB CD/DVD drive to boot to the top.

  Please help me. Now, how can I boot Windows XP CD?

  At first, I must say that I really wonder why you do not have something to trade integrated optical drive. Qosmio F30 is not that old laptop and is perhaps the warranty still valid. You should check with the partner of service authorized in your country.

  For start with external peripheral is not so easy because the external drive doesn't recognize started upward. Theoretically you should either external ODD visible to your Qosmio. For older laptop, it is possible if you start Notepad in pilot mode and load BACK to BACK. After doing this you have access to the external hard drive and can start the installation.

  You can do this with your Qosmio laptop?

• Re: Portégé R700 - how to reset the BIOS/supervisor password?

  Hi all

  I just bought a used Portege R700 and want to reinstall Windows.
  I can't access the BIOS due to a configuration of PasswordUtility from Toshiba supervisor password. The previous owner did not provide this password.

  How can I reset it?

  Thank you

  Hi Spets

  You cannot reset the BIOS password. It must be done by the Toshiba authorised service provider. I'm sorry.

  If you need addresses and phone numbers, you can find it on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• How can I migrate JUST a BONE from a HARD for one SSD drive, by the way, the HARD drive is a laptop and I use the SSD on a new office, I just built.

  I tried to start with my computer desktop laptop HARD drive, which of course, did not work.

  and I can't connect several hard drives or SSD for my laptop, how do I migrate JUST windows 7 and not the rest of my hard drive to my new SSD?

  Install Windows 7 on an SSD will require a "clean install", using your original Windows 7 installation DVD.  Please review: Windows 7 and SSDS: secrets and tweaks of the development of installation

• Portege R700-1CZ - cannot use the latest driver of fingerprints

  My fingerprints camera worked fine until I updated the drivers yesterday to the latest version.

  I mainly use it to login in and encryption of files, but now I n t get this option. I uninstalled and installed again, tried reinstalling the software but nothing. When I go into control panel > biometric devices > use your fingerprint with Windows, I get the message that there is no app management installed. But when I check in the programs installed, I see "Authec Tec Winbio FingerPrint Soft" installed.

  Any help?

  Hello

  On the page of the Toshiba UE driver you can find the fingerprint software which works correctly.
  First, I recommend you to uninstall the software to print digital also you can uninstall the driver in Device Manager too.
  Restart the unit, clean the system and registry run CCLeaner (freeware tool. If you have not installed it in the past, do so before installing the software of fingerprint).

  Then install the software of fingerprint to the driver page.
  Restart again, run the test.

• [Solved] Laptop only uses the SSD storage, not RAM storage at all - Dell Inspiron i7559

  I just got this laptop a few weeks ago and it gave me so many problems.

  I've used 217/256 GB of my SSD. However, my laptop comes with 8 GB of RAM, which I have no idea how to access.

  Is it possible that I can use my RAM storage?

  or should I just buy an SSD with a storage more...?

  onionbulb

  I just got this laptop a few weeks ago and it gave me so many problems.

  I've used 217/256 GB of my SSD. However, my laptop comes with 8 GB of RAM, which I have no idea how to access.

  Is it possible that I can use my RAM storage?

  or should I just buy an SSD with a storage more...?

  RAM is not for storage.

  You'll want to buy a larger SSD.

  But with an SSD of larger and is delivered with all questions of current hard drive cloning etc..

  Good luck.

• Using the IDE &amp; SATA hard drives on the same system

  My system: Vostro 400 desktop, Intel Core 2 Duo 2.3 GHz, Windows XP Home Edition.

  Situation: I use a SATA hard drive and the DVD drive is SATA. I want to add an IDE hard drive (from my old computer) to this system. I can't find any IDE cable or even an IDE port on the motherboard to add an IDE cable for a hard drive.

  Question: Is it possible to add an IDE hard drive to this computer and run hard IDE and SATA drives simultaneously?