Portégé R700 - 14L - no HDMI sound after reformat HARD drive

Similar Questions

• Satellite L350 - Crackle sound after replacing HARD drive

  I recently had to replace the hard drive on my Satellite L350.
  Since then, the sound was crackling.

  I downloaded the top so far, pilots, was deleted and reinstalled the crackles still pilot.
  Any other pointers?

  Thank you. Dawn

  Hello

  Have you installed the OS of the window using the Toshiba Recovery disk or have you installed a clean Windows operating system using Microsoft disk?

  I advise to use the Toshiba Recovery disk to install the operating system once more.
  In addition, the sound chip is Realtek so I think you also need to choose the audio driver from the Realtek page.
  Here you will always find the most recent driver for the chip.

• HP Mini 110 - no sound after replacing hard drive and install XP

  Mini 110 my wife died recently and I had to replace the hard drive.  I got everything up and working well except for the audio.  The driver on the HP website for the 110 will not install as it is said that there is no device installed for this driver.  In the list of hardware, there is a PCI Device with a question mark, and I can't seem to find a driver.  Even after the installation of the driver chipset and bios flashing, there is not audio device work.

  There, can anyone help?  I would really appreciate it!

  Try to install the audio driver from here and check... ftp://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44799.exe

• After reformatting, hard drive named L not C.

  I was reformat the hard drive for more than 16.5 hours a bad virus kept this interference. The last two times, he finally went through, but both times the hard drive has been named (L) (C).

  I am quite at a loss on this one! Any ideas?

  It is the only hard drive in the computer.

  Hi docfnt,

  If possible, you can try to connect the hard drive to another computer and then format the hard drive. Afterwards, connect the hard drive on your machine & check if it works very well.

  Note: Once you connect the hard disk on the other machine, it assigns a drive letter as the C: drive. However, when you connect the hard drive on your machine after formatting, it should show the c: drive.

  Reference: How to partition and format a drive hard using the Windows XP Setup program

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I reinstall the CS5 after reformatting hard drive?

  I'm teaching for CS5 and Photoshop Lightroom since 2011 license. They are only installed in a computer that needs to have completely reformatted hard drive. What are the steps needed to ensure that resettlement work?

  Thank you

  Soledadcv please see http://forums.adobe.com/message/5418120#5418120 where the oldest download section titles of software Adobe is discussed.

• Reinstall the CS6 after reformat hard drive

  I see my serial number in my products and services - how to re install the software?

  Just like the last time - download the installer of your page or the trial version and activate it with your serial number.

  Mylenium

• I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after the use of realplayer download

  I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after using the lplayer rea download

  Hello

  We will try to download different video using different downloader (other than RealPlayer) and see if the problem still persists.

• No sound after reformat dell not dimensions 5150.please post link. Thank you!

  No sound after reformatting. could someone please post a link to download the driver?

  Go here:

  http://www.Dell.com/support/troubleshooting/us/en/04/ProductSelector

  Let the web page to detect Service Tag/Express Service Code your computer
  Select your operating system
  Download drivers

• Satellite Pro M30 PSM35E - after the sound of the HARD drive, I can't reinstall Windows

  After the hard drive noise I couldn't reinstall Windows. It stops after a few seconds.

  Buy a new hard drive and what the specifications?

  Hello!

  Of course, you can buy a new HARD drive, but I would be interesting what laptop you have.
  Otherwise I can t say that the HARD drive that you need.

  Good bye

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• Satellite U840 - how do I reinstall Win 7 after replacing HARD drive

  I had a HARD drive error.

  So I formatted the hard drive (after trying for months to get the process to finally finish that)
  Now, I a U840 Satellite with a clean HARD drive and do not have the installation for Windows 7 discs.

  I searched the net and found nothing of use!
  Help, please

  see you soon
  Nick

  Hello

  You need to create the own recovery in the past disc!
  This recovery disk allows you to install the Toshiba image after the HARD drive is dead or has been replaced.

  In case you have not created this disk, it is possible to order this support:
  http://backupmedia.Toshiba.EU/landing.aspx

• After a hard drive crash and recover most of my files on an external hard drive but who eventually became my only internal, because I live on an island in South America and there is virtually nobody on the island I live it can he

  After a hard drive crash and recover most of my files on an external hard drive which eventually became my only internal, but because I live on an island in South America and there's hardly anyone on the island I live who can help other that a friend, I took a trip to Miami to visit the genius bar and they did a new install of Capitan which I don't really like by the way.  In any case, I though I had lost all my iPhoto library, but I managed to find my photos. Only now I have two libraries... the iPhoto with images from my Photos on Capitan and 8 years.  Is it possible to consolidate them in a library?  And can I still use RAW to be able to edit photos? aIso, y at - it a tutorial for the Photos?

  In the future more facts and less editorial help here

  SO now, we know all about how you feel but nothing on your system or your problem

  What version of El Captain do you have (10.11.3 is the current version with Photos 1.3)

  You cannot merge libraries without third party software - Photos of power can merge pictures libraries

  You can migrate iPhoto libraries to libraries of Photos by dragging Photos icon in the Dock

  When you first launched the Photos it has migrated the last used for Photos iPhoto library

  I hope this will help, but to get specific answers, you need to provide real information and not feelings

  LN

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• HP Pavilion 17: mouse pad does not work after replacing hard drive

  Hello

  After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

  I installed the Synaptics driver but it didn't help.

  How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

  USB mouse works fine.

  See you soon

  The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

• How can I retrieve my files from the clouds after my hard drive has crashed - files were not deleted.

  How can I retrieve my files from the clouds after my hard drive has crashed - files were not deleted.

  Don't know what your problem is - log on to Skydrive and recover the files that you need them, or download the app to Skydrive and they will all be uploaded at the same time.