Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

Similar Questions

• Is it possible to use the port replicator with the Satellite Pro series?

  Hello
  Is it possible to use the port replicator (Docking Stations) for Tecra series laptop with the Satellite Pro series?

  Hello

  No, as far as I know it of not possible to use a port on laptops Satellite Pro Replicator.
  All laptops that support the Port Replicator has a port extension at the bottom of the unit.
  To my knowledge, the Satellite Pro series don t have this port.
  For now only the Tecra and some units Protégé(ie: S100) supports this feature.

• Portege R700 - cannot activate the top modem mobile broadband

  Hi all!
  I have a big problem with my Portege R700 with Broadband Modem built-in.

  I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

  Where the new driver for FN Options?
  How is the correct name of this option?

  I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

  None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
  He worked perfectly but after the installation of the new 2 weeks no chance.

  * Issues: *.
  *.) don't see a modem mobile broadband in hardwaremanger *.
  *.) FN F8 show no option to activate the modem

  Help me please - it is an urgent problem because I need this laptop for businesses. :(
  KR
  Philipp

  > do not see the modem mobile broadband in the hardware Manager

  The question is: did you buy a Portege R700 with a module 3G?

  I m asking because different Portege R700 were released with different specifications.

• Portege R930: cannot use the keys FN under Win XP

  Hye

  I'm French. I'm sorry, but my English is not good. I'll try to explain my problem

  Yesterday, my boss gave me a new computer. It's a PT330E Portege R930-1FE with windows XP, 7 has been uninstalled

  I can't turn off my touchpad. I can't use the Fn key.

  I called technical support and after I downloaded the drivers for seven 32-bit and 64-bit... But I still have my problem

  Please, you have a solution.

  Thank you

  Hello

  Fn keys are controlled by special tools of Toshiba and depends on the running system.

  Using Win XP, you need to install the common Modules and this must be done first. The common modules is an essential component of Windows systems.
  He will perform the other original programming from TOSHIBA to work properly.

  Check this box:
  [Common Module Win XP v6.07.03 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 83752 & OSI D = 10 & driverLanguage = 42]

  To get the other buttons FN working (ie the screen switching output), you must install hotkey utilities for display devices
  [Utility Hotkey for display v1.0.2.5 for Win XP | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 83758 & OSI D = 10 & driverLanguage = 42]

  In order to disable the touchpad, you need to install Touch Pad on / off Utility
  [Touch Pad on / off Utility for Win XP v2.5.5.1 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 83770 & OSI D = 10 & driverLanguage = 42]

  I recommend you to check the page of the Toshiba UE driver and install all the available drivers for Win XP.

• Portege R700 - cannot update the BIOS

  Hello
  I recently bought a Portege R700 19 M and I downloaded the latest BIOS version available in the Toshiba support page and when I run the .exe file, it does not work with this message: "the computer is not supported.
  And when I look in the HWSetup Toshiba tool, it does not display the BIOS version but some weird characters (letters not usual) so I can't find out which version is installed.
  Thank you for your help

  Hey Buddy,

  You update the BIOS to the version preinstalled Windows from Toshiba?
  Are you logged on as administrator when you try the update?

  To be honest I doubt a problem to update the BIOS because I found other threads where users report that BIOS update was successful.

• Portege M700: Cannot use the fingerprint reader after update for Firefox 3

  Hey

  I have a Toshiba Portege M700 Tablet and with the truesuite software on a fingerprint reader and password Bank plugin.

  It's all working fine and dandy with firefox 2.
  Then last night I went and updated for firefox 3 and now I can't log in to Web sites with the fingerprint reader.

  No error messages, nothing. I can say that the truesuite or Bank password software is not detecting firefox 3. I've updated to the latest version that I could find, 2.0.2.0.

  I found this thread by telling me the process of update of firefox it breaks and I should completely uninstall and reinstall firefox, which I did.
  That didn't fix it.

  Then I completely uninstalled and reinstalled truesuite. That did not help either.
  Its still broken.

  Anyone know a workaround or a way to fix this, or should I wait and see if there is an updated version of the password database? (I find it unlikely because this isn't really a standard program)

  Hello

  I think that the new Firefox version is not fully tested and possibly it s not completely compatible with the 3rd party applications.
  I remember the same problems with older versions of firefox. Finally, it has been resolved.

  But why you don t use internet explore? As far as I know the fingerprint works without a problem

  In any case if you want to continue to use the browser firefox 3 so I think that the only solution is to wait for an update.

  Concerning

• Portege R700 - cannot adjust the 1366 X 768 screen resolution

  My screen does not have the entire screen - he ends up on about 2cm on the right side.

  The problem is that I can't adjust the 1366 X 768 screen resolution. Highest on the list of options is 1200 X 800. I downloaded the current driver - but it does not help. I used system restore a few times and it is sometimes useful, but not always - IE, it defines the resolution of 1366 X 768, and all goes well.

  It makes me crazy!
  It's a R700, windows 7, 64 bit.

  Are you using the original Toshiba recovery image? I mean the original pre-installed OS that you got with your laptop?

  I mean the original image is designed for certain model of laptop, so I can't imagine that this problem occurs with the Toshiba drivers.

• Tecra S1 stops when you use the Port Replicator III

  Hello

  I ve you have a problem with a Tecra S1 Notebook and Port Replicator III. When I anchor the portable station, it turns off immediately. It doesn´t so serious I m in Windows or not. The same notebook works in a Port Replicator II without any problem. My first thought was, the Replicator III may be damaged, but I tried with an another Tecra S1 and it worked! Can someone help me with this?

  Thx a lot!

  Mathis

  Hello

  AFAIK that should not be any problem as Tecra can be used with the two PRs. The only thing I can recommend is to reinstall the Toshiba Mobile Extensions.

  Good bye

• Display problems on Portege M100 connected to the port replicator

  After having connected the M100 to a port replicator, I meet the following:

  Sometimes the first couple of seconds, the external screen is used.
  When Windows XP Pro login screen, external monitor off running and only after the opening of the TFT screen, I can go back by pressing Fn - 5.

  Another question:

  A minute later, after starting windows at 1024 x 768, the Exchange System suddenly resolution
  to 1280 x 1024.

  I manually switch back to 1024 each time, but the system uses 1280 after a reboot.

  Do you have any idea how DIFFICULT 1024 and how to maintain external when it is docked?

  Thanks

  Hello

  I put t know 100 percent how this fix several issues, but you should first check if updates will help you.
  For example, to check on the Toshiba page if the new BIOS, driver card graphic and display Service for external monitor.

  How the words on the display for external monitor Service:

  1.) description of the problem:
  The Intel display driver has a characteristic, as one of its characteristics, to store used display to system shutdown before and use the device to display the images when the system starts the next time, as long as the device is.
  However, this specification has attracted a large number of complaints that images were not displayed on an external monitor, but on an LCD, if systems have been used in the following way:
  1. turn off the system with the images displayed on a LCD screen.
  2. with the LCD closed, anchor the machine to a longshoreman who has a connected CRT monitor.
  3. turn on/off the system will display images on the CRT, while the system is starting.
  However, the display driver will switch the display device on the calendar in Windows JOURNAL to the screen and displays the images on the LCD screen, which is the previous display device.
  4. from the screen LCD is closed, the user will never know where the images are displayed.

  2) corrective action: update the BIOS on V1.30 or more and install the TOSHIBA display driver

• Portege 3480CT: cannot use the 16-bit PCMCIA card

  Hello

  I had a problem with a PCMCIA card (new media wave jammer, 16-bit) on a 3480 with Win98 & XP.
  The card appears as an unknown device in the "remove hardware" - tool.

  In Device Manager it does not at all appear and Windows did not ask for the driver.

  It looks like a card damaged, but still, this card works fine in another laptop!
  The problem could be related to different areas of memory used by the Cardservice.

  The Cardservice of the 3480 ct seems not be configurable.

  What can I do?
  Thank you

  Hello

  The PCMCIA card doesn't need a driver!
  To my knowledge, you must check the settings in the BIOS!

  On the second page of the BIOS, you should try to change the configuration of device for all devices and in the section of PC card, you must set the controller to Cardbus/16-bit mode

  then save the BIOS settings.

  Maybe it helps

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• Can Portege R500 - I use the Fn + F5 on the keyboard?

  On the laptop keyboard, you can use Fn + F5 to switch the video output to the screen of the laptop to one to connect to the outside.
  Is there a button that you can use with a USB keyboard connected to the laptop which would have the same effect as Fn + F5?

  We have a problem with one of our Portege R500.
  When the laptop is docked in the port replicator, we have a desktop extended on two screens - a 22 "on DVI and a 17" on VGA screen.
  When the user takes the laptop away and uses that off the port replicator, the display returns to the screen on the screen of the laptop so this means what they re - anchor their laptop in the port replicator, they have no display on a screen.

  The work around is to open the laptop, press Fn + F5, close the laptop, connect and set the view registered software intel.

  Any help would be appreciated.

  Thank you
  Steven

  Hello

  Message describe you exactly how the switch of the display function.
  Everything is OK.

  If you ask for FN + F5 function on the external keyboard so I must say that, as much as I know this FN feature is not available if the external keyboard does not support the FN keys.

  But you can also view the Mobile Extension of Toshiba (if you are using Win XP).
  In Mobile Extension-> display tab service change, you can activate the display changes service and could check how the display changes after the connection and disconnection of the R500.

• Lightroom cannot use the catalouge named 'Lightroom '.

  I read online for a solution for this for two hours. I tried all the solutions I found. Please can someone help me with this error message

  "Lightroom cannot use the catalouge named 'lightroom' because it is not writable and cannot be opened.

  I changed the permissions, without success.

  I ran as administrator with no luck.

  There is no current lock file.

  What else can I try?

  Thank you very much

  At this point, I think that you need to restore a recent backup of your catalog file.

• Cannot use the functions F1-12 on my Satellite C55 - A - 19 K

  Hello

  Satellite C55 - A - 19 K have a keyboard drivers?
  I cannot use the functions F1-12 and can not get the wireless since it s on the keyboard...
  Any 1 can help please?

  This function is not controlled by the driver keyboard, but with utilities and tools specific to Toshiba.
  What operating system do you use?

• Users on the network cannot use the files after upgrade to Windows 10

  When I switch to win 10 people on the network cannot use the files on my computer

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you have problems with network connectivity and access files on network on your Windows 7 machine. I will certainly help you to the query.

  I would be grateful if you could help me with more information to better understand the problem and a solution:

  1 is this computer connected to a network domain or home?

  2. what exactly happens when users on the network try to use/access files on this computer? Do they get an error message/code?

  In the meantime, I suggest you refer to the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_web/Windows-10-network-file-sharing/18fba63e-7b6c-46FE-BA23-575a634fcee8

  Hope this information is useful. Please write us back with the required information for assistance, we will be happy to help you.