Tecra S1 stops when you use the Port Replicator III

Similar Questions

• Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

  Hi all

  As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

  I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

  Any assistance received very warmly.

  Thank you!

  Hello

  Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

  Maybe's external screen connected to the docking station?

• Automatic stop when you use the CD/DVD on the 1900-803 Satellite player

  Ive had problems with my 1900-803 for the last 3 months. whenever I use the cd/dvd drive, my laptop turns off without warning after 15-20 minutes. It also stops if I try and play all the video files or scan my hard drive for viruses or spyware. is it because of overheating or any problem with drive

  Hello

  I don t think that the player is responsible for the unexpected shutdown.
  In my opinion it s an overheating problem.
  Well, there could be several reasons for overheating problems, but usually dirt and dust inside the laptop is mainly responsible for overheating problems.
  I recommend to check the cooling modules if they can work properly and then try to clean.
  I use the vacuum cleaner to clean the fans on my laptop. Check this possibility.

• DSC-WX150 will stop recording at 03:00 minutes when you use the HDMI video output

  Hello

  I have a Sony Cybershot DSC-WX150 camera.

  When using an output HDMI cable to view the camera to a television screen, the video movie recording function to 3:00minutes exactly every time automatically stops.

  When there is no HDMI cable plugged into the camera, it records fine 20 minutes.

  I tried changing film formats, changing the power settings, camera reset the values by default, etc., but with no difference.

  Why it only record at 03:00 minute exactly mark when you use the HDMI video output? Someone knows how to fix this?

  Thank you

  Hi tight,

  Welcome to the community of Sony!

  If I understand correctly, when you use your TV as a monitor while video recording automatically stops and does not cross the entire 29 minutes. Based on your manual, it is normal for the camera when it is connected to another device via the HDMI cable. This serves as protection for the camera.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• MainStage "lag" when you use the SPACEBAR as 'play '.

  Hi all, I'm relatively new to Mainstage (V3), and I'm hoping to use it for the first time this weekend to play the extra backing with a band tracks

  The issue I'm having, is that with the SPACEBAR of laptops on 'PLAY '. It is often "lag". or simply does not start the song. I have to wait a second, then hit again, it will work.  It is almost as if in Performance mode, when you use the down arrow key to select the next song, the 'focus' is on the list of patch, and if I click in the background where are playback buttons and stop, THEN that will work. I have not, however, been able to reproduce this particular behavior on a consistent basis.

  Everyone knows the same thing? Or why it is so 'all or nothing '?

  And a question important much donor... I gave all my reading titles to the waveform appropriate the other night (so I could visually see the waveforms above the attenuator as offers of backing track model), however, once I was moving songs in a different order, which stopped working. No idea why?

  Thnaks in advance

  About the offset by hitting the space bar, a thought occurred to me.

  How Mainstage allocates 44.1/16 bit wave files used in the reading plug-in? Which means, when a song is selected, which uses, for example, to separate the 5 cases of reading, one can assume that these audio files used in that song would need to "load" first.

  Anyone know if this is how Mainstage works?

• M40X-141: black screen when you use the WiFi network

  Since I bought my M40X 141 in July 2005, I got black screen frequently when you use the wifi.

  You know this black screen with typical noise from the hard drive.

  I did all the updates without effect. The local seller understood nothing black screen, associated with the use of wifi.

  In the XP world, nobody seems to find this kind of abnormal things so I'm desperate to find a solution to stop the frequent black screens. Recently try a usb dlink wifi dongle (dwl-G122) the constant flow of black screens disappeared
  (An Xp session 10 days was previously impossible).

  Now, I know this is a bug in the original software and I try desespartely to find a patch or updated driver or professional advice.

  Is there someone here who can help a tired multi restart man to use his laptop with the original material?

  Your laptop should still be guaranteed if you bought in June 2005. Take it to your authorized Service Provider nearest and have their say. They should already provide for a procedure for this and know what to do. Sure the frequency that uses WIFI and display inverter coincides, and you get the black screen. Change them should fix this problem.

• No bass when you use the docking station to not probe

  When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

  

  Yes! I finally solved it on my system:

  • Go to the control panel
  • Choose the material and audio

  or simply to display all Control Panel items

  • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
  • Wait for the program to come black EQ
  • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
  • Uncheck the 'improvement of Audio '.

  Fact

  In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.

  

• When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

  I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

  When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.

• Windows Mail stops when I use the spellchecker

  Windows Mail sometimes/often stops when I use the spellchecker.  There is no obvious reason or a consistent trigger I can find.  I lost the email I typed.  I would prefer not to have to record every email in my drafts before I check spelling it.  How can I fix?

  Hi Holnee,

  Looks like you can have something in the background, interfere or that we would need to check the system for any problem files.

  The first thing you can do is to check your system for any possible infection such as a virus or spyware. Do a full scan of the system and see if you find infections and if yes which solves the problem that you are experiencing.

  The next thing to do would be to put yourself in a situation of clean boot to ensure that no background program interfere.

  1. Open the Start Menu
  2. Type msconfig in the Search box and press enter
  3. Click on continue in the UAC prompt
  4. On the general tab, click Selective startup.
  5. Under Selective startup, click on to clear the Load Startup items check box.
  6. Click on the Services tab, click to Select the hide all Microsoft Services check box and then click on disable all.
  7. Click OK.
  8. When you are prompted, click restart.
  9. After the computer starts, check if the problem is resolved.

  If that still does not solve the problem then let's you run the System File Checker.  It will scan all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  1. Open the Start Menu
  2. Type the command prompt in the box start the search
  3. Right click on command prompt and select run as administrator
  4. Click on continue in the UAC prompt
  5. Type the following command and press enter:
     sfc/scannow
  
  Please let us know if this solves your problem, or if you have any questions.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you use the Windows XP Mode integration, it fails; maintains a new attempt and finally I have to cancel

  When you use the Windows XP Mode integration, it fails; continues to try again and finally I cancel it. The same newspaper for Virtual PC on the host computer has the following error message: Windows XP Mode integration error 'failed to connect in place inside the "Windows XP Mode" VM on channel 0 on the... named pipe endpoint XP, TCP port 3389 with the 0x8007274c error mode. This error occurs every time, but I don't know why he is successful a few times and sometimes fails. This question was in another post and mentioned the removal and resettlement components of integration, which I've tried, but it did not help. I also checked that I have the latest version of the integration components (v. 14.1.7600.16403). I have a separate instance of Virtual PC that I brought over my old XP machine and it was never a problem with integration. The problem with the image in XP Mode occurs also, regardless of whether or not the other Virtual PC image runs. Only the image of the XP Mode has this problem. I suspect it's perhaps a conflict of TCP port in the named pipe, but if so, I don't know how to solve. Thanks in advance to anyone who might be able to offer advice.

  Thanks for the reply. I tried to reinstall the integration features in the past, but the problem has come back at a later date. A few days after I posted this request for assistance, I needed to log out of Windows 7, so I hibernated the XP Mode image. Then, I opened a session in Windows 7 and thought I'd give it a try once again, and it worked this time! I did nothing special. So hopefully that will happen in the future, just as it went and on the past few months. Enjoyed your attempt to offer advice, however!

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• How to enter the character ü when you use the pinyin keyboard?

  How can I enter the character u when you use the pinyin-simplified keyboard, for example, for the opening of the syllable nu with your 3.

  The keyboard pinyin-simplified is for entering the characters han, not latin.  If you want to type the latin pinyin, you must use the extended ABC keyboard configuration.  A list of the shortcuts is to

  http://symbolcodes.TLT.PSU.edu/accents/codemacext.html

• Is cell required when you use the map applications of conduct?

  Is cell required when you use the map applications of conduct?

  Yes. GPS does not work with a Wi - Fi connection.

• WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  https://support.Mozilla.com/en-us/KB/granting+JavaScript+access+to+the+Clipboard

  This extension will help you implement the security policies for access to the Clipboard.
  
  Allow the extended Clipboard support:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/852

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know