Portege R700 - install Windows 7 via Windows Deployment Services - error

Similar Questions

• How to install Windows 8 Pro cd image in the Windows Deployment Services on the 32-bit version of Windows Server 2008?

  Hello.

  I wanted to ask you for example in Windows Server 2008 32-bit when there are Windows Deployment Service. From there you can add images and then you can install windows on the network. So I wanted to try to do it with the cd Windows 8 Pro where I but I couldn't do that because in the catalog of Sources, I find "install.esd" not "install.wim" how the server or service request, with the cd of Windows 7 you can do, but you can't do that with windows 8 Pro I have buyed haved. I want to try to do this with Windows 8 Pro cd on the network because I have 3 pc at home with Windows 8 Pro and I wanted to try out the service deployment with windows 8 when I need to install pc so I prefer to install it on the network not on cd or etc. P.S. for all PCs with windows 8 pro I have buyed them, I have license key and etc.

  I use the 32-bit version of Windows Server 2008 in thw.

  Hello

  You can view this issue in this help link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• EliteOne 800 G2: EliteOne 800 G2 NIC driver not recognized with Windows Deployment Service WDS

  Hello

  I have just taken receipt of 5 new HP EliteOne 800 G2 23 "no touch machines. All PC's are generally imaged using Windows Deployment Services.

  I downloaded sp72515.exe that is the Intel I219 NIC driver pack for Windows 7 64 bit and injected these drivers into Windows Deployment Service and updated the boot LiteTouchPE_x64.wim file. Windows reported it went slowly and the 6 drivers concerned are all showing loaded with so much success in WDS.

  

  

  Problem. When I PXE boot the Windows EliteOne 800 G2 pilot of the CARD is not recognized by the 800 EliteOne G2.

  Wizard error

  A connection to the deployment share (\ < servername > \Deploymentshare$) could not be made. The following network device did not have a driver installed. PCI\VEN_8086 & DEV_15B7 & SUBSYS_8058103C & REV_31

  Hello:

  The only suggestion I can offer would be to try the driver directly from Intel...

  The 2nd file listed on the left side of the page is for W7 x 64.

  https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-?v=t

• Windows Deployment Services Server2012 r2

  The benefits of server WDS 1) and disadvantages. (Windows deployment services)

  (2) in the WDS server there is a picture in the store

  (3) my question is that if the OS with the basic application can be installed not.

  (4) the question of whether this application can be used or not.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Re-install Windows Vista Service Pack 1

  Hello, I have recently reinstalled my Windows Vista Home Premium.  Now I am trying to re - install Windows Vista Service Pack 1.

  I had to download it because I couldn't get by a Windows Update.  When I tried to install the Service Pack, I received the following error message: Error Code: 0x8000FFFF.

  I want to upgrade to Windows 7, and then to 10 Windows but I don't think I'll be able to update without Windows Vista Service Pack 1 and 2.

  Can anyone give me any help will be greatly appreciated.

  Thank you.

  Rich

  I have been unable to install SP1 via windows updates but has been able to do it using the suggestions here:
  https://social.technet.Microsoft.com/forums/Windows/en-us/4120f8ff-ae6c-437f-A40D-8d48794d9841/services-Pack-1-for-Vista-Home-Premium-will-not-install?Forum=itprovistasp

  They include two tools running of Microsoft and then by installing SP1 downloaded in a boot environment. After finishing SP2, windows update has provided a new Windows Update Agent, which made it impossible to update. This is my 4th new installation disc from Dell, that started because of this same update to Windows Update Agent. I'm about to give up. If you try to install, I would set a restore point before doing so.

• Side effects of installing windows xp service pack 3 upgrade on windows xp media center edition version 2002 service pack 2

  Will there be side effects to install windows xp service pack 3 update on my windows xp media center edition version 2002 service pack 2?

  Done correctly, installation of SP3 will have as a side effect, a very beneficial: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  How TO get a computer running WinXP SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.

  Original title: iso to wim

  I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.

  Thank you

  Because you are dealing with Windows Server 2008, I suggest that you go on the TechNet forums and re after your question here. They are better equipped to help you with questions regarding the problems of Windows Server.

  Thank you!

• Cannot install Windows xp service pack 3

  I am running windows xp with service pack 2.

  Whenever I try to install service pack 3 by using the automatic update, only lasts a few hours installation, then stops with "access denied."  This has happened for several months.

  PAM and Jeff,
  While you have found the information which had been requested by PA Bear, you can go through this article as well:
  Steps to take before you install Windows XP Service Pack 3.  So I suggest that you download the SP3 on your desktop and run from there.  You can download it here:http://support.microsoft.com/kb/322389 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install windows xp service pack 3

  During installation I get an error message which can not be installed due to the control ID identification.  What does that mean?  What should I be looged as an administrator?

  You receive the "ID of control not found" error message when you try to install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/878472

  (Ignore the part SP 2 of the title). TaurArian [MVP] 2005-2010 - Update Services

• my laptop is messed up after installing Windows Vista Service Pack 2

  My internet does not work and a message came up saying "internet explore has stopped working, there is a problem, windows will let you know if there is a solution" a box then came advising me to install Windows Vista Service Pack 2 and I did and now my laptop is messed up. After that I connected, a black screen appears then I found a solution in another forum and able to-> explorer.exe task manager and a something regedit and once my computer has restarted after it is a message saying "Windows has encountered a critical problem and will restart automatically in a minute." and internet does more either.
  Help!

  Hi, somehow I managed to fix my laptop using other answers I found on the forums and they were based on what you sent me here. I now have another problem with my laptop on internet access and an error message appears on my firewall is OK, but my University has a firewall up, so I think I need to go see them on this subject. Thanks for your help, thank you very much

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• I'm unable to install Windows XP service pack 3

  Original title: Windows Service Pack 3

  My computer is running Windows XP 2002 and Service Pack 3 to Windows wont install after many tent. No explanation is given other that the update failed. My firewall is disabled. Any suggestions?

  Hello

  I suggest you to go through the articles to know more about the installation of the service pack Windows Xp.

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-in/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  I suggest you follow the steps in the article and then check if OU are able to install Service pack 3.

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Get back to us with the results.

• I can't install windows xp service pack 3.

  I can't install windows xp service pack 3. My computer crashed and I had to reinstall all software.  I have mcafee total protection 2011 installed with a firewall. The windows xp cd I had to reinstall had windows xp service pack 2 on it. It was installed it was automatic update that was lost when the reinstalled. How to obtain windows xp service Pack3 installed because I can't use microsoft fixit tool becuae it says that I must have windows xp service pack 3 installed and microsoft net framework 2.0 sp 2 difficulty using it and internet explorer 8?

  SP2 starts xp Security Center, he also started two firewalls, xp firewall

  are not recommended, remove the mcafee firewall. Better yet, eliminate

  McAfee until xp is up to date... Moreover, how was xp reinstalled, it must

  format 1 hd, then install xp. This is done in DOS, not windows

  Explorer...

• will not update and install windows xp service pack 3

  try to load turbo tax but disc will not load because it displays windows xp service pack 3 is required to load.  I failed to load this update on my computer

  I failed to load this update on my computer

  And the reason why you did not...

  FYI

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• Receiver 0x8007043C error code when you try to install Windows XP service pack 3.

  What should I do if I have has been updated to windows xp and I received this error? [Error number: 0x8007043C]

  I think I have some kind of a worm of Svchost. I tried Malwarebytes which came with nothing

  After a sakhi system. I have Norton anti virus. I did a system restore. I am running Windows in safe mode, try to update

  service pack 3 and service pack 2 installed.  Windows will not be updated in normal mode, as I tried in safe mode. I tried to manually update to service pack 3 internet explore and get this error. Windows will not be stopped, programs do not start, and when I open the Task Manager sometimes I see a Svchost process take a lot of memory and slow everything down.  I have internet explorer 8.

  Any help would be great. Thank you.

  Hello

  Start the computer in normal mode and follow the steps from the link: steps to take before you install Windows XP Service Pack 3: http://support.microsoft.com/kb/950717

  Also, you can follow the procedure from the link: how to troubleshoot an installation fails in Windows XP Service Pack 3: http://support.microsoft.com/kb/950718