Portege R830 - Eco and other buttons do not work after installing Win7

Similar Questions

• Satellite U500-1F5: eco and FN buttons do not work after BIOS update

  Hello world

  I hope I can find a solution for my problems here.

  I bought a new Toshiba Satellite U500 (PSU9ME),
  I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

  Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

  1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
  2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
  3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

  I hope you can give me an answer about my problems,
  I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

  BUT

  does not my prob

  still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

  The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

  I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
  PSU9ME00D00XAR model U500-1F5

  Windows 7 (64)

  Thanks in advance

  Hello

  First one comment:
  * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
  That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

  All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.

• FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BE)

  FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BEING) - not able to use the Beats speakers. The software updates that I have to install?

  Hi Jim,.

  Open windows control panel, click the drop-down list box "view by" at the top right of the window and select "large icons" - you see an entry for Beats Audio in the list and if you do, it's actually launched if clicked?

  Kind regards

  DP - K

• Satellite U500 - 1 8 - eco and touchpad button do not work

  I had to update my Windows 7 Profesional version and now I have some problems:

  1. I installed eco utility but when I press the single button of co control nothing happends
  2 start/stop pad touch button does not work (not as important)
  3. when I press the fn button context menu? (the bar at the top of the screen with shortcut explanation)

  I looked on the toshiba site, but can not find good files someone help me?

  Thanks in advance

  Hello

  In my opinion, you must reinstall Toshiba Value added Package and the Eco utility. All utilities, you can get on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  So I agree with the user above the reinstallation of this tools, everything should work properly again.

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• Internet, printers, and other devices does not work after recent windows upgrade

  After a recent windows update automatic, I can't get online, print or use other network devices.  The unit of the internet connects very well and both Mozilla and Internet Explorer from fine, but cannot 'find' network.  The printer driver is installed, but the programs can not find the driver.

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  If you use a connection please check the internet connection by cable if you face the same problem when working in mode safe mode with networking.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows Vistsa with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Method 2.
  Also I would ask you to put all the drivers of material from the manufacturer's Web site and check.
  For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this helps.

• Portege 2000 - cover sensor/special keys do not work after installing XP?

  Windows XP SP2 is installed on a drive formatted on a Portege 2000 previously configured to run Win 2000 factory.
  After the installation of all downloads for Windows XP available on the Toshiba site have been added.
  The Toshiba special keys for browser and Toshiba console now do not work and the lid sensor
  to get the computer to sleep or into hibernation do not work when the lid is closed.
  She will be in hibernation if you press function f4. The XP was installed came not from Toshiba.
  Help? Thank you very much.

  Hello

  The fact is that the Toshiba power saver controls the hibernation mode, and the day before.
  Here, you can configure this option.
  AFAIK closing cover option you can set only on the eve of setting power off or no action. You cannot set to Hibernate.
  In the energy saver, you will need to use the Details button. In the system power mode, you can configure this action.

  Good bye

• Buttons do not work after installing Windows XP to A200-1HV access keys above "F".

  Hello again!

  On the 1st sorry for my bad English = (Hot-keys close 'power button' Don't work.) I'm talking about the access key: browser, media, play/pause, stop, next button, the previous button. Are pilots have this key? I don't found drivers on the web page for this key.

  I have legal Windows XP SP3 with all updates.

  Of course you need software. I think that these buttons are controlled by the Toshiba CONTROL utility and you can find it on the download page of Toshiba. I just hope that you have updated the BIOS to the version of Windows XP Home edition. It must be 5.20. To work well WXP you need this version of BIOS.

  By the way: I don't know about you but I believe that SP3 is not yet supported, and I just hope that everything will work well. Otherwise, install Windows XP SP2 home edition. It should work without problem.

  Good luck!

• Accessbility Equium A110 - 233 buttons do not work after installing XP

  Hi, I have a Toshiba Satellite A110-233, with windows XP.

  on my laptop, I have 6 buttons below the power button.
  1 web
  2 music
  3 play/pause
  4 stop
  5 skip ahead
  6 back.

  Since I reinstalled window on my laptop, it will not work. I have a program call for windows startup Inspector. I use to control the program that starts when the pc starts. could someone tell me what the name of the program is to make these buttons work?

  Thank you

  Emily

  Hello
  But if you used CD recovery provided then the program must be installed. If this isn't the case, then just look here and download the software:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Then it should work.
  Welcome them

• Re: satellite C660-26Z: FN keys do not work after installing Win7

  I have a SATELLITE C660-26Z after format and reinstall a new version of windows that my function keys do not work.

  However they work until I connect and then they don't work on any account I can accidentally extinguished they if so is it possible to reactivate them? FN and the keys 1-4 works but the Fn Esc all the way to F9 keys do not work any ideas?

  Thank you

  Ben

  p.s. I have Toshiba value added package

  Hello

  You must install VAP and Flash memory card Support utility.
  The utility of Flash Cards control the FN keys.

  Install and test again

• WIFI does not work after installing WIN7 to HP Pavilion DV1000

  I hope you can help! After the complete collapse of the old WinXp I installed Win7 - mostly away from the ti works. However, WIFI does not work. (P/N is PY869PA #ABG, he also says dv1303ap on the label)

  Is there a driver for the available WLAN? Witout WLAn or internet access good old HP is pretty useless...

  Hi, Andreas:

  Here's what you need to do to get this old Intel Pro 2200 card to work with W7...

  Download the zip version of the driver from the link below.  The first file listed.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=15798&lang=eng&OSVersion=Windows%20Vista%2032 * & DownloadType =

  Unzip it into a folder.

  Go to Device Manager and click on the network controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

• Re: Satellite A300 - fan does not work after installing Win7

  Hello.

  I did a new install of Win 7 pro 64-bit, and after it does not my fan, not at the start or in Windows. To check if it the fan itself was broken I re-installed Vista instead and the fan worked again!
  Installed new Win 7 but now it's silent :( I checked in the BIOS (latest version 1.80) but I couldn't find any option here. Am I missing a driver or something?

  My Satellite canned extinguishing because of this, so I would really appreciate help :)

  Best regards / Ocke

  Post edited by: Ocke

  Hmmmm... really strange. I use Win7 32 bit on my Satellite A300-1LI and it works perfectly.
  Maybe a stupid question now, but have you tried to use the 32 bit version?

  You have also installed all the Toshiba drivers Toshiba value added package (includes the Toshiba power saver tool)?

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• The top of page 1 1/4 inch has no answer whin you click on it. As in this page, sign in or register and other app does not work. in English

  The top of page 1 1/4 inch has no response when you click it. As in this page, sign in or register and other app does not work. in English

  This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears