Portege Z930 - boot with Dynadock docking station problem

Similar Questions

• Compatibility issue with the Portege 7020 / display CT 7200 & docking station

  Hi guys,.

  I have some problems with 2 cell phones.

  1 is:
  I bought a 7020 used to replace the broken of 7200 screen. After having disassembled the screen, I noticed that the connectors have the same number of threads, but one of the terminal of the 7200's screen has more. 'no problem' I thought, and with patience I picked up the cable of the adapter of 7020 one put in the 7200.
  But when I turned it on I saw only the colored lines and squares: S: S
  If you want I can provide with the NP, if it would help... Even if I check the compatibility before ordering.

  2nd problem:
  Portege 7200 correctly recognize the docking station, while a few beeps before starting the 7020, and obviously it does not work with him. I checked on the toshiba site and the dock would be totally compatible!

  And for the end... Where can I find the bios updates?

  Sorry for my bad English, I hope someone could help me!

  Kind regards
  Francesco

  Hello Francesco

  You'll be really lucky if someone here can help you with these old models of laptops. I'm sure they have about 10 years.
  No manual maintenance and sufficient knowledge is not easy to help you with this replacement of the screen.

  This problem with docking station may be related to defective hardware. The two laptops are so similar, and two of them can be used with this docking station. How you can be sure that equipment is high on 7020?

  The BIOS updates are available on http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp, but as I can see for Portege 7000 there is no updated BIOS, just to 7020.

  If you wish, you can contact the nearest Toshiba service provider. they have manuals for maintenance for this old notebooks and allow you to provide accurate information on the parts you need.

• Is it possible to connect the Qosmio F60 - L10 with a docking station?

  Hello

  is it possible to connect the F60 - L10 with a docking station? I would to connect to the docking station, a monitor and a peripheral such as a printer and a LAN cable.

  Thank you.

  Hello

  You cannot connect Qosmio for docking station because Qosmio includes not all ports docking at the bottom of the unit. Have you seen one?

  But you can buy a [Dynadock | http://eu.computers.toshiba-europe.com/innovation/generic/Dynadock_EMEA_0107/cnt/GENERIC/key/Dynadock_EMEA_0107/banner_id/Q3_DYNADOCK_SM_TEG_0107] Toshiba.

  The Dynadock can be connected to computer laptop s USB port.
  Google a bit for Dynadock. There are different models on the market

  Welcome them

• Xperia z3 compact charge with dk48 docking station is slow!

  I use application ampere to check amperage when xperia fresh compact z3 with dk48 docking station (I always load up on 15%)

  I see:

  15% to 89% so amperage 800mA-900mA

  from 90 to 100% so amperage 150mA-250mA

  and finally the full pin load 100% need 3 hours 10 minutes

  It is slow

  and my question is: if I use dk48 dock to recharge, it really makes safe for my z3 compact?

  They should be equal, as long as the phone is not used more when in the dock, which would make loading more slowly.

• Can't find the Insert key on Dell XPS 10 tablet with keyboard docking station

  Original title: Windows RT Question

  I have a Dell XPS 10 tablet with keyboard docking station.  I can't find an "Insert" button anywhere on it. I use a remote connection which has a login screen that requires a combination of keys Ctrl-Alt-Insert to initiate. Searched high & low online and off. Can't find a way to generate the Insert key race in this environment on this tablet. Someone at - it the answer?

  Hi Kerry,

  You can consult the manual provided by Dell, namely the architecture detailed on the keyboard. Also, you can get in touch with Dell support. Check out the link to post the same query in the Dell forum:

  http://en.community.Dell.com/support-forums/laptop/

  In the meantime, you can use the onscreen keyboard. Check out the link to use a keyboard on the screen under Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/type-with-the-on-screen-keyboard

  Please let us know if you have more queries on Windows.

• Portege M200 - weird display with docking station problem

  Hello

  I use a Portege M200 with MS Windows Vista and the Toshiba docking station. Whenever I connected the system closed down it will start with low light and different screen resolution. The brightness can then be adjusted in Vista.

  To solve the problem, I have to disconnect it, then put it in PC Mode and finally stop Vista. With the next offline boot, it works correctly and can be re-docked. Maybe it's just a lack of understanding of the system? It seems that with a rooted boot, nVidia somehow takes place or is there different profiles?

  Thank you!

  Alexander

  Hello

  At first, I must say that Portege M200 is old enough laptop model and I really wonder that Toshiba supports this model of laptop for Windows Vista. You are really lucky in this regard.

  In any case very important is info which edition of WXP Tablet Toshiba offered tools for/disconnect. If I remember well, it was utilitarian Toshiba Mobile Extension. Using this tool you has been able to use different settings for Bay service as well as for output screen to choose the correct resolution.

  Under Vista it is controlled by Vista and, AFAIK, Toshiba does not have any special utility for this. You must also understand that procedure/disconnect (power switching power supply) is controlled by Vista and I can imagine that under Vista it does not work perfectly.

  My opinion is that there is not much to do, but I hope I'm wrong on this issue. Let's see what else users of forum about this.

• Tecra A10 - change of resolution with Docking Station problem

  Hello

  I own a Tecra A10 - 14Q and I like it a lot - it is a very beautiful piece of hardware, including the functionality of UMTS.

  When the Tecra is moored to the dock Express, and the external monitor (Samsung SyncMaster 22 "with resolution 1600 * 1200) is on defining the Office to be cloned on both screens, passes resolution of 1280 * 800 on the Tecra to 800 * 600 as"best resolution.

  I tried Intel and Mobility Center graphics settings, but I can't find a way to set I want to keep the resolution 1280 * 800.

  Suspicion to do so automatically is welcome. I found that a program that now lies on my desk that I run so it redefines the resolution to 1280 * 800, but I would like to stress that resolution remains just that it is.

  Kind regards

  YaGru

  Hello

  It's not easy to say why the resolution automatically decreases

  But sometimes, if the external monitor would be connected to the Tecra A10 directly without using the Express Docking Station?

  Otherwise the problem could be linked to the dock Express (Replicator of port express?)

  Maybe the 1600 * 1200 resolution on external monitor is too high for the express port replicator and so there are some questions which s my personal suggestion

• X 1 carbon output problem with Onelink docking station

  Hello

  I have a problem with the Thinkpad X carbon 1 in which I can get resolution of 1920 x 1080 on my external monitor (capable of 2560 x 1440), when connected via HDMI using among Dock port but when I connect via direct X carbon 1 display port, I can get the full resolution I want. I've updated the firmware of the docking station Onelink and the pilot video X 1 carbon, what can I do else? Any thoughts?

  Thanks in advance!

  On OneLink port hdmi port is hdmi 1.3 only, so it doesn't support resolution qhd. You should get the dock pro OneLink with its integrated displayport.

• T42 docking station problem

  Hi all.

  Having this weird problem with one of T42 our workers. Whenever she connects her T42 in a docking station and close the lid of the laptop, mouse starts to moves around, no emails can be selected in outlook, no option to restart the computer (start-> stop brings to the top of the dialog box, but cannot select anything from there.)

  She tried an another dock, but no difference, the same problems.

  You have any ideas?

  Thanks in advance

  Lullaby, welcome to the forum,

  A few suggestions to try;

  (1) replace the TrackPoint cap with the traditional "furry" dome has a profile below.

  (2) remove the cap of Trackpoint all together

  (3) make sure that the keyboard is installed, disassembly and assembly instructions can be found here (you can try perhaps also bend the keyboard a bit if remove you it)

  (4) turn off the Trackpoint using the UltraNav utility or in the BIOS

  As you can probably guess, I think that your problem maybe the Trackpoint is in contact with the screen when closed.

  Hope this helps

• Multiple monitors with laptop docking Station

  I currently have a laptop with a closed lid hung in its docking station, it has 2 external monitors connected by separated through the docking station DVI ports that are configured for a dual monitor set up. Locally on the laptop, it works fine, but when you run the VMview Client (v5) the virtual session recognizes only a monitor. The laptop model is a Dell Latitude E6530 and is the Dell docking station. PRO2X. Our typical installation fuels the virtual desktop customers Wyse zero configuration double monitor works fine. But with the laptop and a station, with options of Windows display, it does not recognize another monitor connected. Does anyone know what I have to do to make this work? When I configured the machine dedicated through VMware View Admin (v5.1) I chose to allow up to 2 monitors.

  In the view of the customer, when you select the office you connect to.

  Below the list of available desktop computers is a menu drop down called "Display".

• Tecra M5 docking station problems

  Hello

  I don't know if this has happened elsewhere, but my Tecra M5 (Win XP / SP 3 / fully updated on MS) boots when undocked, but hangs on the appearance of the first "Loading Windows" screen Re-booting subsequently always results in the typical menu with SafeMode etc... My amateur solution is to start offline and then just plug it in, but my logic suggests that this may not be the right solution. I have run the reinstallation CD and completely re-formatted the system twice, but anything will do. I'd appreciate more ideas... Thank you & best wishes

  Richard Taylor

  Hello

  As far as I know original Toshiba recovery image is WXP SP2 only. Am I right about that?
  This happens immediately after the clean operating system installation or after the installation of SP3?

  Recovery image has been tested with docking option and it should work. I think it's a problem with SP3 which can have a negative influence on demand for mobile extension. This application is responsible for the own berthing and departure procedure.

• Question about Portege 2000 boot with Linux

  Hello world

  My Portege 2000 PIII 750 MHz, 512 RAM, 20 GB is just driving me crazy. I would try to install Linux and downloaded some distributions to try it. By the way, I use an external CD/DVD player, with a 16-bit pc card connector cable. Starts the startup until the BIOS is involved, but when it gets to the pilots being involved, start crashes, with each distribution, except of course to win XP, with which he moved perfectly.

  Anyone have any suggestions on how to proceed? I would really like something lighter than Windows XP Home edition on my machine. THX!

  Hello

  I do not have this Portege, but I know that the recovery Toshiba (WXP) image contains the external driver for ODD and installation can be done without any problem.

  Maybe you can find some useful tips in http://newsletter.toshiba-tro.de/main/index.html

• T60 Docking Station - problem view double

  
  
  

• Problem with laptop and docking station

  Hello.

  We have two laptops with two docking station. Two laptops with docking station have the same problem:

  When the computer is off and its still connected to the docking station, the fan in the computer to run very fast starting. The fan turns on for a while. That's a lot of noise, which can be annoying to the person using the office. When the computer is turned on, the fan runs at normal speed. If you disconnect the computer from the docking station, the fan stops immediately. Any ideas?

  1. number and product name

  HP ProBook 6460 b

  Docking Station VB043AA

  2 operating system installed

  Windows XP 32-bit

  3. error message

  No error message.

  4. all changes made to your system until the problem occurred
  

  No recent changes.

  Thanks in advance.

  -Betroger

  Its been a while that we have solved this problem, but I forgot to post the solution.

  We sent the laptops in for repair. They changed the motherboard and fans. This solves the problem.

• Tecra A10 - 1GV and Docking Stations: Dynadock vs Express Port Replicator II

  Hello Forum;

  Official Toshiba site proposes to use the Docking Station Express Port Replicator II for laptop A10 1GV.

  I need for my construction work 2 monitors.

  My question: can I use with the Express Port Replicator II two additional monitors at the same time (there are 2 connectors (DVI and analog VGA/RGB). Is it possible to create two different images in this way?
  Some have said, that after a connection with the DVI - D VGA connector is turned off.

  Someone at - he experiences?

  On the other hand Toshiba offeres the Docking-station "Port replicator USB Dynadock U" -.
  This docking station is only connected via USB with the laptop. According to the data sheet - it provides an analog and a digital monitor with different views at the same time, up to 1920 x 1200 pix., extra headphones and 6 x USB 2.0. more network connection

  This official docking station works with all USB-connect computers, but in the compatibility list does not mention the Terca A10 and gives only a declaration of compatibility for the series Toshiba NB200 from Toshiba.

  Someone out there experimenting with this docking station?

  What would be the best way to work with two monitors + the computer screen?

  Thanks for all the good advice.

  Michael

  Hello

  As much as I know Express Port Replicator supports the simultaneous use of RGB & DVI only if the laptop itself also supports the simultaneous use of RGB & DVI.
  So if the Tecra A10 1GV would support the use of RGB and DVI port simultaneously then Express Port Replicator should support too.

  The Port USB Dynadock Port Replicator support VGA or DVI port. I didn't find the Dynadock, which was equipped with two ports together.
  The Dynadock can be connected to all computers with USB 2.0 and it beautiful s expansion.