23 "all-in-one: Black squares randomly on the screen

Similar Questions

• How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  Have you looked at the site of Canon?

• PRI all-in-one HP Deskjet 2542: not the printer connected to the Modem

  My modem (wired LAN) password and the name was changed recently and now my printer (HP Deskjet 2542 all-in-one) does not connect to the modem.  The blue light just continuously flashes.  This is the only change that has been done to my modem and this is the first time I tried to print. It is printed on the front.  I called the cable company and they determined my modem was working fine and has suggested that to change my printer settings.  I grew up the printer instructions on my computer, but could not find something that I could change my settings to match the modem.  I think that's what the cable company told me to do.

  My printer is mod. # SNPRB - 1204 - 02.  If you need made more information let me know.  It seems that this should be a quick fix, but I'm not a computer geek.

  Hi @first100years,

  I'd love to help you connect your printer to your wireless network. The flashing blue light confirms without a doubt that, for some reason, the printer is is more set up.

  I found the following steps in this document: connect the printer after change of your wireless network.

  The HP software automatically collects the network settings by temporarily connect a USB cable from the printer to a computer that is connected to the new network. Follow these steps to reconnect the printer to the network.

• Brother all-in-one does not work with the computer more

  After an automatic windows/XP download started what follows:

  All-in-one Brother takes control of the computer, but are not sent or computer will not receive the image to the desktop.

  Also, same unit will receive a fax and normally sends to the computer to the paperport, but now he sends (i.e. "connecting to PC" displayed on the LCD of the brother) to a computer but it can not be found anywhere; so lost.

  Measures taken so far:

  1. Uninstall and reinstall the Brother software, no help.

  2 brother support after an hour said that it is the computer not brother (I believe that good).

  3 System Restore will not work, it goes through the whole process, but said at the end that there nothing; Try again...

  4. in addition, conducted a deep scan for viruses etc, nothing found.

  Any ideas?

  You have posted to a group of Vista, but seem to be using winxp?

  What automatic download? Update history will show what has been updated

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  Hello

  Please see the links to check ink levels.

  Check ink levels

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c00257147&tmp_task=prodinfoCategory&CC=US&DLC=en&LC=en&os=4132&Product=390315&sw_lang=

  How can I check my ink or toner levels?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

• Printer all-in-one HP 5520: document in the queue does not print

  Printer all-in-one HP 5520: Document in the queue does not print

  Hi Anita,.

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, you are having problems with printing.

  1. do you get an error message when you try to print?

  2. is the problem with offline or online printing mode?

  Perform the steps in the link and check.

  Why can I not print?

  Meet us if you encounter problems while printing or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Adobe Reader I have a black square instead of the mouse pointer.

  Adobe Reader I have a black square instead of the mouse pointer. How can I get the return pointer?

  Hello

  To see the AppData folder, please do the following:

  On Windows 7 - Click Start > computer > organize (top-left) > folder and search options > view tab > click "Show hidden files, folders and readers."

  On Windows 10 - click Start > File Explorer > view (top left) > Options > change folder and search options > view tab > click "Show hidden files, folders and readers."

  Here is the screenshot:

  

  Let us know the results.

  Thank you!

• Black bars moving on the screen, flickering screen

  Hello everyone, I have buyed this summer than a laptop and I noticed several times some Black bars moving on the screen, I tried a few methods how to remove the battery, restarting the computer, etc... After the reboot, everything seems to be ok, what guys do you recommend me to do? I live in another country (Romania) and the laptop was buyed Austria - MediaMarkt, I can't get the laptop to the place where I buyed of... The laptop is a HP Pavilion 1352Eg G6, I expect answers, thanks in addvance, best regards.

  I would like to start by assuring the BIOS and video card drivers are updated here.
  
  Since it is temporarily resolved by restarting, it might be a software problem and driver updates help in general.
  Have you noticed if it seems to happen after using a certain program?
  
  You can try to connect the laptop to an external monitor. If the same behavior is on the external monitor, then it's a video card problem. If it only happens to the screen of the laptop, then it might be software or a hardware in the Control Panel, motherboard problem or somewhere in between.

• 2305 Dell all-in-one - black screens random

  Model purchased Feb 2011. Good reliable system, however in the last 2 weeks, after coming down from system, it crashes on black screen after sitting idle for 10 minutes about. He turns not off - just goes to black. Then I have to turn it off. When I go back to the task, I restart and all right until I get off system and then 10 minutes later, the screen goes black.  I would like to look inside to check the status of the dust, but not sure whether or not the back detaches. This sounds like an overheating situation? Maybe I should run the diagnostic on it. Any thoughts would be appreciated.

  

  Configuration of the system (BIOS) update

  www.YouTube.com/watch

• Qosmio PX30t all-in-one: black screen after a few minutes of inactivity

  I just bought a new all in one Px30t and I have 2 problems with it causing me to nuts.

  I have a mouse battery that dies after 24 hours and the screen goes black after a few minutes of inactivity.
  I changed the settings of the display in standby, the Power Options etc everything I can think of it doesn't seem to make a difference.

  Can also someone point me in the direction of a manual online for the model.

  > The screen goes black after a few minutes of inactivity.
  Can bring back you to life somehow, or you need to restart your Qosmio?

  Usually the manual s user document is saved on the HARD drive (preinstalled original machine). Can find you it?
  Did you check support page to Toshiba for manuals online (Toshiba page for the country of purchase)?

• Pavilion MS225: all on one black screen help

  Hi, from Thursday morning, I noticed a light flickering on the screen on and off during the day, then that night, the screen went black all of a sudden, I could put in sleep mode and wake him up, things went very well after that.  I turned it off for the night and kept overnight get this screen black (I could barely see the bottom of screen and icons) but I was able to see my login page for a few seconds when wake-up mode 'sleep'.

  I went to updates and saw that the Realtek High Definition Audio Driver need updated, so I tried and failed so he can install from Windows. I could see the screen enough to get on the industrial site and uninstall and reinstall. I reinstalled graphic discs too. Now, it seems to work very well, not black screen or flashing for about 5 hours now since the update the Realtek device. I was wondering if that was the question all along, is that this driver not getting updated cause screen problems? I also installed AMD Catalyst Install Manager and it updated the drivers.

  Honestly, I don't know much about computers and it is the only one I also gives access, any help would be appricated! Thank you

  Hi there @slyn1234,

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that your computer screen went black, and after updating the driver it works again.  I'm happy to help you with this.

  In response to your question, as to whether that was the problem, I'll give you a qualified Yes. It may be that the driver has been updated but that something has happened to the existing driver, the file has been corrupted, or another program or driver was installed that are in conflict. Another option is that a setting has been changed somewhere; There are several possibilities.

  If this kind of thing happens again, see if you can boot your system with the help of computers HP - safe mode of Windows 7. Windows safe mode will load with the base drivers and is a way to access your system, if it seems that there is a software problem. Can be modified in Mode safe as parameters to display, or drivers, or uninstalled applications that may not be easy to dismantle a normal start.

  Another useful to look at document is: HP PC - computer won't start (Windows 7). I hope this helps.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• 5610 all-in-one - black thick top of line down on the pages scanned using the scan feeder tray ONLY

  Using HP Officejet 5610 all-in-one I've had for years and maybe 6 months ago, I noticed that anything that is analyzed by the load plate (if you need to scan a bunch of pages without having to analyze each page individually between analyses what is tedious that need constant attention) has this thick black line goes up and down on the middle left of THE pages scanned. Honestly, it looks really bad like if there is something hidden in this terrible line through the process of moving the paper through the feeder, BUT the original is just fine without damage.

  If I scan just a page by placing the document on the scanner glass, and then NO matter whatsoever.

  100% reproducible every time.

  So I know that it has nothing to do with the glass (which is clean), but only when the scanned document must pass through.

  Checked the forums for similar problem and found no exact match.

  I imagine that an expert out there knows the answer to that high hand. IF you could speak up, I would appreciate it.

  I THOUGHT ABOUT IT!

  I read another post:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-Pro-8500A-plus-vertical-black-lines-only-when/m-p/1391261/highlight/true#M30268

  who is mentioned on opening the ADF cover. Well I opened the whole Assembly, having absolutely NO idea how it all works, and I found a 1 "x 8.5" thick mirror (for lack of a better term) who had what looked like white paint on it to the place where the pages were probably getting the black line. I scratched, retested and the question was gonzo - that's all!

  Then my wife just told me that she thinks that she knew what the problem was all along. She had put on a page and it had not dried, and she tried to put it in the charger to make a copy. She just thought that we were going to replace the printer even when and if ever, let me know. During this time it was me mad for months. What are you laughing at me? This all-in-one works very well for years - replace without good reason, must learn a new product, get new cartridges, out the same old, same old, NO way. If it is not broke, do not replace it!

  Detective Conan.

• OfficeJet 6500 all-in-one - black line down page

  Our newly purchased Officejet 6500 all-in-One is the production pages with thin black lines down the page about 2/3 of the way through the page (right side of page).  Is there a solution to this problem?

  This was only happening with ADF.  After several cleanings with no changes, I found this forum.   After reading the plug on the glass, I went back and really clean the glass.  This has allowed the problem.  Thanks for the forum.