Multiple monitors with laptop docking Station

Similar Questions

• How to connect 2 Dell U2415 monitor on the docking station in combination with a Dell Latitude E7450 processor and controller

  Hi guys

  hope you can help me out here. I plan to buy some E7450 processor and controller of Dell's Latitude for our company with a docking station and some Dell Ultra Sharp 24 monitor - U2415. Aims to use the E7450 processor and controller with the dockinstation and connect 2 monitors U2415 of Dell. the issue here is. What type of cable do I need? should I buy 2 normal display port cables? It resolution things to work with this combination?

  Here the link of the monitor

  http://Accessories.AP.Dell.com/SNA/ProductDetail.aspx?c=HK&CS=hkdhs1&l=en&s=DHS&SKU=391-BBUW&redirect=1

  here some specifications of the dell Notebook printer

  Fix. You can also ask users on the laptop Video board on the platforms they use.

• Is it possible to connect the Qosmio F60 - L10 with a docking station?

  Hello

  is it possible to connect the F60 - L10 with a docking station? I would to connect to the docking station, a monitor and a peripheral such as a printer and a LAN cable.

  Thank you.

  Hello

  You cannot connect Qosmio for docking station because Qosmio includes not all ports docking at the bottom of the unit. Have you seen one?

  But you can buy a [Dynadock | http://eu.computers.toshiba-europe.com/innovation/generic/Dynadock_EMEA_0107/cnt/GENERIC/key/Dynadock_EMEA_0107/banner_id/Q3_DYNADOCK_SM_TEG_0107] Toshiba.

  The Dynadock can be connected to computer laptop s USB port.
  Google a bit for Dynadock. There are different models on the market

  Welcome them

• Multiple monitors: VGA laptop to Westinghouse TV

  I have an Acer Apire 5920. My warranty has run out of earlier. I got a virus in August and had to do a full restore. I used the DVD of Windows XP instead of Vista which was OEM on my Acer when I bought it. Right now I have Win XP Home Edition 32 bit. I had to download all my drivers on the Acer site.

  My question:
  When I plug the VGA of the laptop and the TV it says no Signal on the TV. When I arrived at the display settings in the Properties menu I have only 1 screen. It says "display:" (default monitor) on
  It doesn't let me change to another. I think that I have an Intel graphics card.
  How can I activate the Multi monitor on my laptop?

  Hello E - Odc,

  Thank you for visiting the Microsoft answers community.

  If you had the opportunity before you install Windows XP and that you are not given a choice now, perhaps you have installed the incorrect drivers. I am not able to determine what you have installed on the Acer site.

  Also, here are some links that may be beneficial for you in the configuration of multiple screens.

  How to configure and use multiple monitors in Windows XP
  The use of multiple monitors with Windows XP

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't find the Insert key on Dell XPS 10 tablet with keyboard docking station

  Original title: Windows RT Question

  I have a Dell XPS 10 tablet with keyboard docking station.  I can't find an "Insert" button anywhere on it. I use a remote connection which has a login screen that requires a combination of keys Ctrl-Alt-Insert to initiate. Searched high & low online and off. Can't find a way to generate the Insert key race in this environment on this tablet. Someone at - it the answer?

  Hi Kerry,

  You can consult the manual provided by Dell, namely the architecture detailed on the keyboard. Also, you can get in touch with Dell support. Check out the link to post the same query in the Dell forum:

  http://en.community.Dell.com/support-forums/laptop/

  In the meantime, you can use the onscreen keyboard. Check out the link to use a keyboard on the screen under Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/type-with-the-on-screen-keyboard

  Please let us know if you have more queries on Windows.

• How to set up multiple monitors with desktop

  How can I set up multiple monitors with desktop computer?  (DVI output)

  http://Gizmodo.com/5141386/win-7-tip-adding-extra-monitors-is-so-easy-a-Caveman-could-do-it

• Xperia z3 compact charge with dk48 docking station is slow!

  I use application ampere to check amperage when xperia fresh compact z3 with dk48 docking station (I always load up on 15%)

  I see:

  15% to 89% so amperage 800mA-900mA

  from 90 to 100% so amperage 150mA-250mA

  and finally the full pin load 100% need 3 hours 10 minutes

  It is slow

  and my question is: if I use dk48 dock to recharge, it really makes safe for my z3 compact?

  They should be equal, as long as the phone is not used more when in the dock, which would make loading more slowly.

• Grateful two monitors on a docking station

  For some reason windows is not recognizing my two monitors I have connected to my HP NZ223AA 230W Advanced Docking Station.

  I use Windows7 64 bit on an HP EliteBook 8560w with an AMD over-pants m5950 graphic card.  As near as I can tell the docking station allows the two DVI ports to use as well as the grahpics card is good for multiple monitors.

  Does anyone know if it is possible to connect a third monitor?  In other words, I have my laptop connected to a station host and then two other monitors for a total of three.

  Thank you

  Cannot be done. The graphics card is soldered to the motherboard.

• HP m6 for laptop docking station

  Bought a new m6 HP Best Buy released an unbeatable price on Black Friday.  Can anyone recommend a docking station that will support an external monitor with keyboard and wireless mouse, audio, printer, etc.?  Thank you.

  Yes, that was the goal.  In fact, I went ahead and bought the docking station Targus ACP71USZ recommended by a couple of sales to your sales center of Boise (which have been very useful, which is said by the way).  They recommended the Targus unit despite a review on your website, which says that it won't work with the HP Envy laptop line.  I followed the advice I had read elsewhere to find and download the latest driver DisplayLink before installing the unit, I did.  It works very well and is apparently one of the few docking stations that will charge my cell phone while it is in the dock.  My only wish is that it has its own switch / stop to start the laptop while it is in the dock, as docking stations company I used.  However, so far, I'm very happy.  I'll write a review of the HP website for the edification of others.  Thanks for your help, Sean!

• The ipad pro supports multiple monitors with different content on each screen?

  I want to replace my laptop with an ipad pro.  Currently I drive three screens with my laptop, all with different content (VGA, HDMI, laptop screen) with no additional adapters.  The Ipad pro has a video card that will allow me to run multiple monitors (3 including the pro) with different content on each monitor?

  Given that the pro iPad running iOS and iOS do not supports multiple monitors, I would say no. I may be wrong, so feel free to correct me.

• The m7 HP Envy laptop: docking station connector

  I bought the computer laptop hp envy m7. It is not compatible with the connector for my docking station, HP xb3000 notebook expansion base. Is there an adapter for the expansion base to the portable Envy? Is there a docking station for the HP Envy laptop?

  Thank you

  Bryan

  Hello

  The m7 envy laptop does not therefore docking port, you will need to use USB docking port. There are many ports of USB docking around such as:

  http://www.Amazon.com/HP-Replicator-docking-H1L08AA-ABA/DP/B008KMDVME

  (HP store says there are 11 products but the site is inaccessible, you can wat to get a complete list

  http://store.HP.com/us/en/MDP/accessories

  Kind regards.

• X 1 carbon output problem with Onelink docking station

  Hello

  I have a problem with the Thinkpad X carbon 1 in which I can get resolution of 1920 x 1080 on my external monitor (capable of 2560 x 1440), when connected via HDMI using among Dock port but when I connect via direct X carbon 1 display port, I can get the full resolution I want. I've updated the firmware of the docking station Onelink and the pilot video X 1 carbon, what can I do else? Any thoughts?

  Thanks in advance!

  On OneLink port hdmi port is hdmi 1.3 only, so it doesn't support resolution qhd. You should get the dock pro OneLink with its integrated displayport.

• Returning to desktop settings dual monitor after re-docking station?

  I use two monitors and my office is configured accordingly. Occasionally I remove my laptop from its station home to use it somewhere else, but after re-docking station, all the desktop icons are crushed in one screen! V frustrating!

  Is there a way to "remember" the original settings dual screen and automatically back to her, without having to re - adjust manually everything?

  You will find a solution to www.winhelponline.com/blog/save-and-restore-desktop-icon-layout.

  Once you have installed this hotfix, you should right-click on an empty area on the desktop to save the layout of your office.  Use the same procedure to return to the saved layout.

  'Al_KL' wrote in the new message: * e-mail address is removed from the privacy... *

  I use two monitors and my office is configured accordingly. Occasionally I remove my laptop from its station home to use it somewhere else, but after re-docking station, all the desktop icons are crushed in one screen! V frustrating!

  Is there a way to "remember" the original settings dual screen and automatically back to her, without having to re - adjust manually everything?

• Use multiple monitors with Client view

  Hello

  Quick question regarding the use of multiple monitors when connecting via the customer to view. I have many users using a monitor with a zero multi configuration client and everything works as expected. When connecting via customer discovered however the Office extends on (i.e. Outlook stretches on left and right screens) two monitors instead of 'renewal' (i.e. the prospects on the left monitor, acrobat opens on the right). Everyone is aware of a fix for this?

  Thanks in advance.

  See you soon.

  Are you sure that you are using PCoIP?  View what version do you use?  Which version of the Client that you are using a view?

  Gunnar

• Portege Z930 - boot with Dynadock docking station problem

  Hello!

  I wonder if anyone here can help.
  It seems impossible to start than my Z930 with the Dynadock (U3.0) attached to it.
  All I get is a blank screen - casting in and external screens are dead.
  Disconnect the Dynadock at this stage has no effect. I have the hard reset of the laptop.

  If I start the Z930 without the Dynadock attached I have no problem - and then I can join the Dynadock and all work just fine.

  So, it is right at boot.

  All the drivers are up to date.

  Is it the way it is supposed to work? Really? Seriously?

  Alex

  Dynadock is designed to work with laptop and this question should not happen.
  Can you please tell us a little more about your laptop?
  Do you use your Portege with factory settings (original preinstalled OS)?
  Which driver Dynadok do you use?
  I assume that in the beginning, everything was OK. Have you noticed this problem a few days later?
  Tell us a little more on the whole issue.