Portege Z930 - need to Win8 driver for Ericcson 3 G

I've updated my Toshiba portege Windows 8, and everything works fine, except the Ericcson G 3, I think and it doesn't work,
What should I do?

Thanks in advance

> except the Ericcson G 3, I can't find, and it doesn't work.
Not even this one?

Try to test and send feedback.

Tags: Toshiba

Similar Questions

  • Portege Z930 - need of external controller for SSD drive internal

    My Board TOSHIBA Portege (ex-portable) (Z930) burned with hot water. I removed the small SSD and now need to transfer the data with a USB drive on another PC.

    I borrowed from a friend a SATA USB adapter with 2 interfaces and even small connectors for SATA was not small enough for SSD from TOSHIBA. Apparently, I need a special SATA USB adapter that installs on TOSHIBA Portege mSata.

    The reason why I wrote here is because there are many SATA USB adapters in internet advertised, but it seems that they have larger connectors. While TOSHIBA calls the marked thereon mSATA SSD, but several people call mSATA for one size larger SSD.

    I don't want to order that something does not again. Is there someone who already removed SSD Portege?
    Could you give me a link for such adapter?

    The laptop was equipped with a chip HM77 Intel Panther Point and with the launch of the Intel chip allowed laptop manufacturers to integrate SSD form factor mSATA (micro SATA).

    There is also a difference between the mSATA form factors
    The mSATA being limited to four chips (NAND) only, Intel has developed a new standard mSATA called m2 or mSATA2.

    In many cases, this is also called NGFF (new generation form factor)
    This standard m2 is longer and has more low a profile

    I'm not sure if this Z930 Portege supports mSATA or mSATA2, but you check the internal SSD drive where this information should be available

  • Compatible WIN8 driver for printer Photosmart 230

    I need a different driver for my printer Photosmart 230, because it is not supported in WIN8.  I only need printing functions.

    On my Windows 8.1, I am able to see it.

  • Help, please... I need Windows XP driver for my CQ40-121TU

    Help, please... I need Windows XP driver for my CQ40-121TU

    Please send me a full links to the driver for CQ40-121TU thank you very much...

    Your computer came with XP? If your computer came with VISTA and was never made for XP, so no XP drivers will be available for the system. I looked at the HP site and could not find XP drivers, which probably means that it is a model of Vista, not XP. If it came with XP then call HP and they will be able to send you a XP disc for a small fee, like $15 or more.

  • Satellite A210-1AS - need Ethernet Controller driver for XP?

    Need driver for Ethernet Controller for XP.
    They are not on the Toshiba site and I need the driver to connect, someone help?

    Hello

    If I m not mistaken this laptop Equium A210-1AS belongs to the PSAFJE series.

    According to me it was equipped of the * Realtek(10/100M) 10/100MBit LAN chip *.

    So if you need an XP driver for this chip LAN then I recommend you research the Realtek is website owner.

    Best regards

  • HP Photosmart 2710: Need a printer driver for a HP Photosmart 2710 on Windows 8.1 RT 32 bit.

    Need a printer driver for a HP Photosmart 2710 on Windows 8.1 RT 32 bit.

    Hi lt12345,

    I understand that you are looking to use the Photosmart 2710 with Windows 8.1 RT, but are unable to find a driver. In my attempt to find a driver, I've come empty-handed. It seems that this printer is not supported for printing from Windows RT.

    Sorry to be the bearer of the bad news. Kind regards

  • I use hp 3330 pro Micro tower PC, I need graphics & Lan Driver for Windows 7

    Hello Sir,

    I use hp 3330 pro Micro tower PC, I need graphics & Lan Driver for Windows 7 32 bit. I need Intel HD graphics driver for my pc. I feel my modem internet connection problem. Please help me.

    Hello

    What is the version of your Windows 7? Please use the following link:

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome?sp4ts.Oid=5160082&AC.admitted=1407043917089.876444892.492883150

    Kind regards.

  • I need a new driver for hp psc 750 for Book 10.8.2 pro... who can help me?

    I need a new driver for hp psc 750. I have a new Version of Book Pro 10.8.2. Who can help me?

    Hello

    You talk about a printer for 7-8 years here. Hope that would help the following link:

    https://discussions.Apple.com/index.jspa

    Good luck.

  • Need to boot drive for M8200N

    Need to boot drive for M8200N prod. # GN551AA-ABA. Vista Home Prem starts with only a blinking cursor.

    I pulled the SATA HDD and with an adapter, read/open the hard drive with windows XP.

    Cannot open programs because it is Vista, but can view and copy many files, some I saved my XP HDD.

    HP no longer has the startup disk. I know now that the Boot disk is on the HARD drive (in reading research reports),

    but have no way to make or find its location to create the recovery disk.

    Open to your suggestions!

    Hi dude, demonstration

    According to hp.com, you should be able to recovery disks for your HP (http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&lang=en&product=3548185) product order

    Regarding the screen cursor are you just see a black screen with a blinking white cursor top left?

  • I need a device driver for this printer by Ricoh mp161l

    I need a device driver for this printer by Ricoh

    The hardware manufacturer is the only scource of drivers for their hardware

  • Audio choppy and distorted on Portege Z930 after update of Win7 for Win8 64

    I just wanted to share a tip with you that cost me some time to work, about the sound reproduction of a Portege Z930.

    When I got my new Z930 - 14L, he was running Win7.
    I tried everything like you do when you get a new machine and it worked fine - including the audio playback.

    When I updated for Win8-64 since the CD that came with the computer, everything still seemed to work very well and I had not changed any driver or Setup.

    However, after a few minutes, the linenn of audio playback. It choppy, distorted, interrupted, stuttering and I was shocked.

    Oddly enough, as soon as I turned my attention to the computer again, reading was OK again - but no screen saver came and no power saving mode has come in so little time. I knew that this was no hardware problem (because it worked in Win7), it was not a driver problem (because the first 5 minutes, the sound was pristine), he was not a ground loop, (as many have suggested) because it sounds differently.

    Thanks to another forum, I discovered that it is actually the combination of Windows Defender, Win8-64 Pro and the audio driver that causes this. If the device is idle for a few minutes, the Defender thinks it's a good idea to use idle time to scan the SSD - causing interference with audio playback. Of course, you cannot simply disable or stop the central antivirus process, that would ruin some the whole point. :-)

    _So I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the problem disappeared! _ it's probably the only time where the installation of an antivirus suite SOLVES a problem. :-)

    BTW, this is not probably limited to this antivirus product, simply play a bit with the Defender.

    Best, Yuppie

    > Then I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the problem disappeared! It's probably the only time where the installation of an antivirus suite SOLVES a problem.

    Thank you much for sharing this details here in the community.
    I guess that the information could be useful for others who have these problems of his fellow men.

  • Portege Z930 - Downgrade from Windows 8 for Windows 7

    Hi all

    I have serious problems with my new laptop Portege Z930-138. I wanted to downgrade from Win8 to Win7 and transferred my old iso of Win7 on a bootable USB.

    I changed the BIOSsetting CMS BIOS in order to boot from USB and it worked.
    But later, I deleted all partitions on my HARD drive in order to have a primary partition where to install my old Win7.

    However I can't do!

    Now I have 1 GB 119.1 unallocated space and there is no way to create a new partition from it.
    Also when I try to install Win7 it says the disc's style GPT.

    I also tried to convert it from the command prompt, but it does not work.

    You guys have any ideas what to do?

    Hello

    Recommend the reading of this Toshiba HowTo:

    Steps to install Windows 7 on a Windows 8 device *.
    http://APS2.toshiba-tro.de/KB0/TSB2B03EX0002R01.htm

    If you follow the steps described in this document, you should be able to install Win 7

  • Portege Z30 - B - WinPE LAN driver for build SCCM

    Hi all.

    I just got a brilliant Z30 - B (PT251A-008002) which will become - if I can get this to work - the new workhorse for fleet work.
    Beautiful machine.

    My only obstacle so far, is all first, it start WinPE in order to apply a task sequence and build of SCCM.
    I found the correct LAN driver on the Intel site and applied to the boot image, but it does not work.
    I need the drivers to WinPE.

    The package contains Intel "WinPE" drivers, but they seem really if applied to my laptop model (if I look in the .inf file) and will not charge, I tried them anyway.

    If there is a driver for this laptop SCCM package, it would be awesome.
    Otherwise, just the LAN for WinPE driver would be perfect.

    Appreciate any help or advice.

    Thank you
    Ryan

    If there is a driver for this laptop SCCM package, it would be awesome.

    Toshiba Europe provides SCCM DRIVER PACKAGE compatible with Toshiba Porteges, Tecras and Satellite Pro
    It is available in Austria, Belgium, Germany, Luxembourg, Netherlands and Switzerland

    http://www.Toshiba.EU/services/on-de...NG/sdp120gs-v/

  • Satellite Pro M70-235: need last display driver for Ati X 700

    Hi, I decided that I will update driver graphic card but on the official ATI driver is not compatible with Toshiba laptops. On the download from Toshiba site, I found that older drivers (8.203-29/08/06) for my laptop to type but I need the latest driver. Can someone help me or send me a download link?
    Sorry for the English and thanks for responses

    Nothing to do. On the Toshiba page, you will find that these pilots. I already checked.
    Maybe the omega drivers will help you

  • Need work NVIDIA driver for my Qosmio X 770 - 128

    I have a big problem with my Qosmio X 770 - 128 (PSBY5E - 035007G 5)

    I have the GTX 560 M and I can't all work driver for this crappy video card

    I just got my laptop I can't beleave any drivers I've tried so far, I get the blue screen error

    can someone tell me what version of driver should I use for this? :(

    I really need a job :(nvidia driver

    Hi guys,.

    the display NVIDIA GPU driver can be downloaded from the Toshiba UE driver page.
    There are drivers for Windows 7 and Windows 8 (version 268.51, v305, 46, v306, 04_3D)

    None of you said something about preinstalled system what Windows systems do you use?

Maybe you are looking for