Ports used by the PCoIP connection

Similar Questions

• What are the ports used by the Cisco VPN Client?

  Hello

  I need to open my outgoing traffic on my firewall to allow two interns (LAN) Cisco VPN Client to connect to their Internet virtual private network.

  I already opened the port 500/UDP, but they are not able to connect. If I open all outgoing ports, they can connect.

  What are the ports used by the Cisco VPN Client?

  Thank you

  You need to open:

  UDP 500

  ESP protocol

  You must also open the UDP 4500 port (if using NAT - T).

  In addition, if the clients are connecting to a VPN 3000 Concentrator series and it is configured for all other options of NAT-transparency, corresponding ports must be open. By default:

  1. If using IPSec over TCP 10000, then open TCP 10000.

  2. If using IPSec over UDP 10000, open UDP 1000.

• Issue after changing the port used by the VSphere Client - ESXi 5

  Being an ESXi 4 guy, I changed the default ports in the proxy.xml file as indicated: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1021199 as I always do. However, this time I did in ESXi 5, before reading the note: ' "for vSphere 5.0, if the proxy ports are changed, the new ports are not allowed through the firewall ESXi.".

  I restarted the management agents and now of course, I can't seem to connent on the host ESXi 5 via any port, and I can't connect to disable the firewall using esxcli. Today what is the workaround?

  Thanks in advance.

  You can access the physical console and go to DCUI and undo your changes... If you made a backup file of the xml file before you make changes, it should be as simple as copy back the original file.

• Why my PC keep forgetting passwords network and lies on the use of the correct connection to the NAS?

  My PC Windows 7 has acted weird lately because whenever I login to Windows and try to access my NAS drive or laptop, he asks the user name and password, even though I chose to remember it.

  The bit about the lie in question is on the NAS drive.

  The NAS drive is an Apple TimeCapsule (shock, I know), but it still works as a NAS device perfect. When I try to open it, it asks username and password as usual, but when I type in it properly, it appears saying that it is incorrect.
  The way I managed to get that player is now of type a random fake user and try to connect, for example comments. It says that I can not log in as a guest so I then type the correct user name and password after and it works...

  If for any reason any Windows is lying to me about the use of the wrong username and password. Also, I tried it on another PC and it works fine so it only affects this PC.

  Someone at - it solutions?

  Hi themichaelkc,
  
  I suggest you open the credentials manager and see if your saved credentials are correct.
  
  In addition, remove the passwords stored in the vault and re - enter the user name and password for automatic logon.
  
  See the following article for more information on the storage of passwords, certificates, and other credentials for automatic logon:.
  
  Store passwords, certificates, and other credentials for automatic logon
   
  See also:
   
  Manage passwords, certificates and other securities

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Determine the NIF port used by the HEART when it is configured in a port channel

  I recently saw an excellent video of live Cisco UCS troubleshooting performance that showed how to track traffic network within Cisco UCS. The speaker made a comment however, to determine that NIF is used by a high HEAT when port-channels are used between the FEX and FI there are different commands to run. You will need to determine the outcome of hash-load balancing. Unfortunately, he never entered what were these commands.

  Then when we have pinned port-channel instead of HIFs and NIFs veths, what commands will indicate which way is used?

  Matt,

  You can use this command:

  B (nxos) # sh port-channel - balance load< this="" will="" tell="" you="" the="" load="" balance="" method="">

  If you use source-dest-ip as in my case, you can use this command:

  B (nxos) # sh port-channel - the balance of the charge-transfer interface port-channel ID vlan ID x.x.x.x y.y.y.y dst - ip, src - ip and it will show you something like this:

  Lack of params will be substituted by 0.

  Algorithm to balance the load on the switch: source-dest-ip
  crc8_hash: 109 port id coming out: EthernetX / Y  < this="" is="" what="" you="" are="" looking="" for="">
  Param (s) used to balance the load to calculate:
  DST - ip: y.y.y.y
  SRC - ip: x.x.x.x
  DST - mac: 0000.0000.0000
  CBC - mac: 0000.0000.0000

  For the blade, depends on which the active vNIC is, for the FEX, depends on pinning, based on the server is located in the blade slot.  Strange servers go through odd links and same servers through the same ports.

  Remember to rate helpful answers.

  -Kenny

• "BC of Tables" Wizard use only the first connection

  I have two connections in my project - ok!
  But when I run the wizard
  
  -> ADF enterprise-level business-> business components of the Tables components
  
  automatically, it uses the first connection. But I want to use the other connection.
  What I can do - except the deletion of the first connection?

  After the first time you run the wizard of BC, it configures a default connection against the project. Try, right click on the project, the project properties-> of business components and changing the connection which is in the poplist.

  CM.

• Ports used by the Windows XP computer management

  I am using a tool in the Management/Action/Connect computer to another computer. My networking people need to know what port must be opened for me to do. Can you help me?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  It will be useful.

• Use of the Trunk Ports (Cisco) on the management interface

  Hi all

  Background:

  We are in the process of consolidation of 2 farms of esx servers and will end up with 10 guests in a single cluster. Guests come from 2 VLAN separate (say 10 of VLANs and vlan 20). A test I took one of the hosts of HA/DRS and tests with it. For HA and DRS to work efficiently and properly in common all resources, we all want vm to leave both VLAN access to move to any host in the cluster.

  The test:

  My single host mentioned above, I created 2 groups of ports on a vswitch, vlan10 tag and with vlan20, I deployed a VM and tried on the two IP address ranges. It worked (with the correct settings of defined IP by VLAN) but as soon as we resources shared the port used by the management of network vmkernel port we lost the connection to the HOST from a management perspective. What the question is that it is possible to connect the management network a trunk port? We have 2 network interfaces connected to the vSwitch and both used for the VM traffic as well as management traffic. That's how they are currently implemented except that the switch port is on a VLAN-specific rather than shared resources.

  Thank you very much

  Chris

  Hi Chris

  Yes, the network management also accepts the vlan tagging/trunking.

  Just add the number VLAN on the Portgroup.

  Maybe you can do a printscreen with the current configuration?

• I have Win7 64 bit and keep losing the internet connection. Convenience store says no istalled network adapter, the same as the one I use now. Dees wireless router is Belkin WN311B &#62; yet my i pad tracks fine.b

  I have a Dell Studio XPS9100 with dual core to intel 2.8 GHz running Win7 64 bit & Belkin router WN311B wireless + wireless adapter. My complaint is that I continue to lose internet connectivity. I quit the program & run the troubleshooter who told me once the wireless card is not installed. I tried to reset the modem & without any result. Sometims you can disconnect & connect internet and reconnect.  My pad on the same system I have no problem. Please help, what is the problem.

  Hello

  Have you made changes on the computer before this problem?

  This problem may occur because of driver or network connection settings.

  Try the following and see if it helps.

  Method 1:

  Refer to the steps in the following Microsoft article and check if that helps.

  How can I troubleshoot network card?

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. Click Start, type ncpa.cpl, and then press ENTER.

  b. right click on your wireless network connection, then click Properties.

  c. click the wireless networks tab.

  d. under preferred networks, click your wireless network, and then click Properties.

  e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Method 3:

  I suggest that you do the following and check if it helps.

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  Hope that the information provided is useful.

• How to know the IP of the machine that used in an unsuccessful connections

  Hi all
  
  I have a 12.1.3 case of BSE, running on 11.0.7 database on OEL 5.5
  During the last period, I have received complaints of a user that his account is to continue locking frequently, the morning that his account is working and after 2 or 3 hours when trying to log in again the password does not work!
  When I checked the historical record of his account, I found the following:
  
  Created by: ALI
  Creation date: December 4, 2010 15:20:54
  Table name: FND_USER
  Updated by: GUEST
  Date of update: January 20, 2013 15:01:23
  
  I ran the "Signon audit unsuccessful connections" CR for this user, and I found the following:
  
  Time to attempt for the user name
  ------------------------------ ---------------
  HR1123 19 JANUARY 13 07:26
  HR1123 20 JANUARY 13 07:19
  HR1123 20 JANUARY 13 07:19
  HR1123 20 JANUARY 13 07:20
  HR1123 20 JANUARY 13 07:20
  HR1123 20 JANUARY 13 07:20
  HR1123 20 JANUARY 13 07:20
  HR1123 20 JANUARY 13 07:20
  HR1123 20 JANUARY 13 08:21
  HR1123 20 JANUARY 13 08:21
  HR1123 20 JANUARY 13 08:25
  HR1123 20 JANUARY 13 08:26
  HR1123 20 JANUARY 13 08:26
  HR1123 20 JANUARY 13 08:26
  HR1123 20 JANUARY 13 08:26
  HR1123 20 JANUARY 13 08:26
  HR1123 20 JANUARY 13 08:26
  HR1123 20 JANUARY 13 14:28
  HR1123 20 JANUARY 13 14:28
  HR1123 20 JANUARY 13 14:37
  HR1123 20 JANUARY 13 14:37
  HR1123 20 JANUARY 13 14:37
  HR1123 20 JANUARY 13 14:37
  HR1123 20 JANUARY 13 14:48
  HR1123 20 JANUARY 13 14:50
  HR1123 20 JANUARY 13 14:57
  
  
  Which means that someone is trying to connect with his account using the wrong password.
  Here, the question is, how do I get the IP of the machine used in the unsuccessful connection attempts?
  
  Kind regards
  Mohamed

  The access log has the ip of the machine where the unsuccessful logon was attempted.

• You can install the server connection and security on the same virtual machine Server?

  I was looking around and found an old post that says that you could do.

  I tried the documentation view 5 but not a lot of luck there.

  If the deployment is small say 20 users view total.

  Could install you the connection and security on the same VM Server?   W2K8R2 64-bit?

  I certainly understand some of the security risks.

  TIA

  Marc Alumbaugh says:

  Any other ideas?

  No other ideas, but we have should stick to previous ideas and continue to work through them. You make progress in this analysis - continue! When it is correctly configured, you have configured the firewall/proxy etc don't not to block PCoIP and that you use at least seen 4.6 on the Client and the server, it does not work.

  It always seems that there's something blocking PCoIP in your environment - where the black screen.

  So when 'PCoIP external URL' on the login server is defined on InternalIP:4172, your View on the internal network Client connects fine. If you run Wiresahrk on your connection to the server to capture the connections, you will see a connection HTTPS turns on TCP 443. Then when you select a pool of offices you will see a PCoIP connection come in. It comes to 4172 TCP from the customer to the login server, then UDP 4172 also from the Client to the server connection as well as UDP 4172 in reverse. For this reverse part, the source UDP port will be 4172 and corresponds to the destination UDP port source on the incoming UDP packets. Check that this is the case. This will prove that the login server is gateway your PCoIP correctly.

  So far so good.

  Then, you switch to your remote Client to view from on the Internet. To do this, you assign the URL of the "external" ExternalIP:4172 PCoIP. Note that you don't need to restart the login server for this to take effect. It takes effect immediately. This IP address will be the public IP address which will probably through a NAT/firewall to access your connection to the server. You can start by checking that the IP address is correct using to connect to the server address when you satrt the customer to view. When you use the same IP address to the Client and through the authentication step, it will prove that it is set up correctly in terms of Routing/NAT etc. Then follow with Wireshark on the login server and observe what happens when you select a pool of virtual offices and get the black screen. You should see the same activity PCoIP on your login server model as in the case of internal test (i.e. starting with the incoming TCP connection on port 4172). View Client will use the ExternalIP address that you specified in the "URL external PCoIP ' to establish the PCoIP connection to connect to the server. So if you don't see this com 4172 TCP on the login server, or you do not see the packets UDP 4172 then something is blocking. This is usually caused by a firewall or a proxy blocking PCoIP.

  If this is the case and you do not see these packets to connect to the server, then run Wireshark on the Windows Client to view and see if you can see 4172 TCP and/or UDP sent to this ExternalIP 4172. If Yes, then you know that something (such as a firewall or proxy) between the Customer View and the view connection server it blocks.

  Let us know what it was.

  Hope it will be useful.

  Select this option.

• Seeing orange blinking after that stop with the charger connected.

  Hello

  I'm new here and I have the following problem.

  Four months after buying the PC (Satellite-Z930-103) I had a battery problem. Suddenly the orange led blinking and the laptop could not be launched. Toshiba service replaced the battery and everything worked fine for about two months. Then the same thing happened again. Because I was working in China, I opened the laptop and disconnected the battery and can be used with the charger connected.

  The PC was sent to a point of service when I arrived at home, where they still indicated a battery problem and offered to change the battery. Because the warranty was expired, I had to pay for it. I refused, because the price they were charging was 300 euros.

  To the surprise... when I received it from the point of service, they have reconnected the battery and the service report said "computer does work well, no fault found '...

  Since I started my fight with Toshiba support and tried to find me a solution. However, the problem was not resolved until today and I have to disconnect the battery and plug it in again after waiting a day every time I forgot to unplug the charger when the shutdown or when he goes into sleepmode) I became an expert at opening and closing of the laptop...

  In any case, maybe someone has the same problem and found a solution, I suppose that it may be a software problem, but Toshiba has not solved until today.

  To describe the problem even once:

  Orange (power) led starts flashing as soon as the computer is powered down (or "standby mode") with the charger connected.
  If this happens, I opened the laptop and disconnect the battery (so I can work with feeder pugged in)
  Then the next day I open the laptop again and re-connect the battery. It works fine until I still forget to unpug the charger, turn off or restart the laptop.

  I'm guessing it's a problem of software and a few simple arrangements or a re-installation of something, it can be solved.

  Because I travel a lot, I love the little thing but I got frustrated at the moment.

  It would be great if I'm right, and someone already had this thing resolved!
  THX advance for any help!

  Peter

  Satellite Z930 is very nice machine designed for mobile use and I am really sorry to hear that you have such problems. I imagine that you can't find some identical threads on this forum so I hope this isn't a "general problem" with this machine.

  I am not a technician but I can't imagine this problem described has something to do with the settings of the software. In the BIOS, you cannot change a large part and in windows, there is a standard Windows power settings and several Toshiba avancΘs.
  Electronic power placed in the motherboard has a few 'standard' functions and switch automatically between battery and power running.

  I can't say for sure, but I guess there must be some problem with electronic power supply. It is not easy to say what the problem is here, and I really wonder that Toshiba service provider was not able to identify the reason why all this is happening.

  Let's see what the other members of the forum think problem described.

• Connect iPad Pro 12.9 "on PC 3 USB port using the new USB 3 iPad camera connection kit

  Hello. I would like to connect my iPad Pro 12.9 "to my PC using the speed of the USB 3 port of lightning of the iPad for faster synchronization with back ups. I bought the new camera USB 3 connection and A kit to A 3 USB cable, put everything together and down to iTunes, but it does not recognize the iPad. Has anyone tried this before?

  You don't need the Camera Connection Kit for this. Connect your iPad to your PC using the lightning to the USB cable supplied with the iPad.

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• Use of high by FORMS (9000 port) when you first login after the CPU connection network

  Hi all

  Oracle E - biz: 12.1.3

  Database: 11.2.0.3

  OPERATING SYSTEM: AIX 6.1

  We applied the last week we have applied CPU July 13 for the first time in our environment Ebiz.

  Patches applied:

  11.2.0.3 SPU database Patch 16742095

  Apps: R12.1 16772121

  10.1.3 home: 9173038

  10.1.2 home: 12837860

  After the application of the hotfix, when the user is connected for the first time, FORMS cmdlet takes too long to open, and during this time network use was very high.

  This happened for the first connection, we have more than 300 + users and recording everything at the same time, created a failure almost because of the high network utilization.

  
  

  Guys, any reason for this behavior. This will happen for the future application of CPU?

  
  

  Moreover, we're on the DECISION-MAKING of FORMS mode.

  Thanks in advance

  Hello

  I'm not sure whether the cache can be copied from one machine to another and the same process, a lag in time should be tolerated in this case that it is reasonable.

  But anyway, you can also lift an SR to check whether the technical support engineers can provide a workaround solution.

  Thank you &

  Best regards