POS cannot set start on the work of backup time

Similar Questions

• You cannot set declaratively developing the slider if you specify an ONLOAD.

  Hello
  
  In my application, I have two javascript functions in the Html header area... and by calling the onload in the Body Html attribute... This sceneriao he launched an exception as shown below...
  
  
  
  1 error has occurred
  You cannot set declaratively developing the slider if you specify an ONLOAD in this attribute. You can set update of the slider programmatically by using the following syntax:
  OnLoad = "mystuff (); first_field(); »
  
  
  can u suggest me how to overcome this problem...
  
  
  Thank you
  David...

  Hi David,

  On your page, go to your page attributes and you will see that it is to set the focus on the first field when the page loads. You need to remove what you can have only a single onload function call. If you need to set the focus, your onload function is adjustable to do this.

  Andy

• (Inspiron 7720) Cannot be started on the installation of Windows 8 media in UEFI

  Hello

  I just got a Dell's Inspiron 7720 (computers laptops 17 ") running on Windows 8. As usual, I want to reinstall Windows 8 myself to ensure that I have a clean install (and to be sure, I'll be able to do if I change my HARD drive). I want to do in UEFI mode and not in Legacy mode.

  • I tried to boot on Dell Windows 8 DVD (requested by phone, IE 8 64-bit Windows) by pressing F12 at startup: the only options are "Windows Boot Manager" and "Network Boot. No way to boot to DVD, Windows starts automatically.

  I went in the "Bios" by pressing F2 at startup (Startup tab):

  • I tried to disable "Secure Boot": no result, kept this option disabled.
  • I activated the Option Rom legacy: a new menu "Legacy Boot: ' allows me to start on the drive of DVD, but housing starts of start-up Mode Legacy, which is not allow me to install Windows 8: the installer says my partition table is GPT, so I can't select any partition on my discs to install the OS.
  • I tried to add a boot option with the name of the Boot Option as ' CD/DVD/CD-RW Drive': is in the list of system files "PciRoot (0x0) / Pci (0x1F, 0 x 2) /Sata (0x3, 0x0, 0x0) /CD" or 2 entries like "PciRoot (0x0) / Pci (0x1F, 0 x 2) /Sata (0x3, 0x0, 0x0) /HD'." ""» I tried all. I left the "File name" line empty. No results: the CD begins to spin at the start and then the operating system starts 2 seconds later. I tried repeatedly pressing "Enter" immediately after the choice of my new boot entry in F12 menu, same results.
  • I tried everything above with the operating system on a USB stick (formatted to Fat32 using this http://www.servethehome.com/uefi-bootable-usb-drive-windows-8-windows-server-2012/), no result. The light on the USB is indicating activity for 2 seconds, then turns off when Windows starts.
  • I tried to start my DVD and my USB on a new Inspiron 660 (office): a line is automatically added in the F12 boot menu and I can start on the DVD or USB in UEFI mode (and I can reinstall Windows), so my devices seem not to be the problem.
  I spent two hours on the phone with a Dell technician, and he was not able to solve my problem.
  It seems to me that Dell has not even attempted to check whether their own DVD of Installation OS works on their computer
  I think I need to write something in the "File name" box when you add a new Boot Option. But why? I forgot something?
  Thank you in advance for the time you spent reading this.

  OK I solved the problem. It's very simple, but obviously the bios needs an update: the one-time boot menu (the one launched by pressing F12 at startup) does not work in the UEFI.

  So, how to start on the DVD in UEFI mode:

  • Insert the DVD into the drive
  • Start your computer by pressing F2 to enter the Bios
  • Go to the Startup tab
  • Add a boot option with the name of the Boot Option as ' CD/DVD/CD-RW Drive' and check that the 'CD' in the end enabled, as "PciRoot (0x0) / Pci (0x1F, 0 x 2) /Sata (0x3, 0x0, 0x0) /CD'." Let the empty file name entry.
  • Put the new entry before 'Starting Windows Management' in the UEFI Boot section.
  • Save and restart.
  • When asked, press a key to boot from the DVD. DO NOT USE one-time F12 BOOT MENU: by SELECTING ' CD/DVD/CD-RW Drive' will NOT WORK.
  When Windows is reinstalled correctly, just change the new boot order or delete the boot entry you created before. Never use the single start menu unless you want to start in Legacy mode (it works).
  I can't believe I lost so much time on this... I hope this will help.

• CANNOT SET VALUE DURING THE CYCLE OF THINKING

  Hi all
  
  OPA 10.4
  
  I have a global and a 1:M entity.
  I have to solve a serial No. to all the entity instances in session according to an external logic. For this I used a custom fuction that sets the value of the attribute "Serial No."
  Error thrown is "cannot SET a VALUE FOR the CYCLE of REFLECTION".
  
  (1) please Suggest a way to apply this logic.
  
  (2) INFERENCE LISTENER (IT) will be useful? Since an inference listener defines the value before and after the session, can I recover session and its data in my code to intermediate language, so I use it after the session?
  
  
  Thanks :)

  Charu Tiwari says:
  Then I would be able to use the session data in the inference for assessment listener code, if I call the Inferencing listener after the cycle of inference?

  If you use an inference, you will have access to all session data (entities, attributes, relationships) in the event listener.

  See you soon
  Frank

• The Instance server cannot be started because the thought of integrated Weblogic

  Hello
  
  I'm a beginner, it's beginning to run the JSF page to prepare oneself to the ADF, error unfortunately faces.
  The Server Instance cannot start because the integrated Weblogic domain has not been built successfully.
  
  I tried to delete C:\Users\ubai\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefualtDomain and start again but the same error as below.
  
  [Waiting for the field to complete the construction...]
  [23: 57:49] Creation of integrated Weblogic domain...
  [23: 58:04] ERROR: an error occurred by building the default domain.
  Please see the log file for more details:
  C:\Users\ubai\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.J2EE.adrs\CreateDefaultDomain.log
  The Server Instance cannot start because the integrated Weblogic domain has not been built successfully.
  
  any help please,.
  
  Published by: 876602 on April 3, 2012 14:13

  The last line in the newspaper said...

  java.lang.NoClassDefFoundError: java.lang.NoClassDefFoundError: org/apache/tools/ant/BuildLogger

  Looks like a library is missing for the same of your WLS install. Try to find the same or better try reinstalling Jdev assuming that something is not respected.

• You cannot select or modify the work

  I'm new to Illustrator CS5 (but not so new drawing tools, etc.) and am trying to change the color on an existing logo.  I have the logo in .eps format, but when I open it, I can not select the work.  I tried 'select everything on the artboard active', etc and nothing seems to work. It's as if she is not there (although, when I go over it I see 'anchor' and 'path' windows pop-up with xy coordinates). I thought that perhaps he has been locked somehow, but I tried the keyboard shortcut "unlock all" (in the menu item menu items are grayed) and which does nothing.  I'm sure it's something simple, but I went through the tutorials and don't see anything about it.

  Any help will be greatly appreciated!  Thank you!

  In your layers palette, check to see if there is a padlock icon, click to unlock

  

  As you see the say anchor type, you can have a mask. If you can select and delete, then the item that you are interested in is in a mask, and it is a real pain because they changed the functioning of the masks in cs4. You can run down the triangles in the layer palettte, dfind the element you want and delete it.

• Cannot view or change the settings of backup - error Code 0 x 80070422

  I am able to run a backup using the existing settings/settings I put when my system was new two years ago.  I just ran a backup and finished without any problems.  But when I click on "Change settings" to view the settings, I get the error code 0 x 80070422.  Error message States "the backup application could not start due to an internal error" followed by "the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  I already read many posts on this site about this error and how to correct.  I followed the suggested steps to fix the problem, but the error persists. =(

  Specifically, I checked that the following Services are enabled.

  -"Remote Procedure Call" (RPCSS) must be active, Automatic.

  'COM + Event System"(EventSystem) must be active, Manual.

  -'System Event Notification Service"(SENSE) must be active, Automatic.

  -"Volume Shadow Copy" (VSS) must be active, Manual.

  'Microsoft Software Shadow Copy provider' (SWPRV) must be active, Manual.

  I also ran an SFC scan and received the following confirmation at the end-

  "Windows resource protection has not found any breach of integrity."

  Any suggestions on the next steps, I could try to fix this? 

  Thank you!

  Hello

  Please provide detailed information on this issue and I appreciate your valuable troubleshooting efforts toward the resolution of the problem.

  However, we are still missing about two or three services so that this error happens when the necessary services are disabled.

  Method 1: Please check these services.

  • Block level backup engine - active - repair manuals
  • -Active - backup manual Windows

  If the settings above does not work, you can try to adjust Volume Shadow Copy (VSS) on Automatic and check if that helps. Then change it back to Manual after verification.

  Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

  If the problem persists, follow the next method.

  Method 2: Disable the antivirus.

  You can also try to temporarily disable the security software of the computer and try to create a backup and check if it works. If you are able to create a backup, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Set up or change automatic backup settings

  Back up your programs, files and system settings

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Questions about the work in real-time

  Hello.  Just a few questions on usage in real time, in fact on the swf file.

  First of all, I want to create something of a drag and drop interface.  Is it possible to have a stage act as two separate steps?  I mean, is it possible to have the left side of my step hold all the components, they are moved to the right side of the scene and placed anywhere, the user can then click on save, and only the right side of the scene is saved?

  Secondly, I'm testing a few things.  What I would do to get a type of free transform on an image on the stage in real time, in the swf file?  So once the movie is played, the user can resize any image then how they like by dragging a corner of the image...

  Cheers for any advice.

  You can use 2 container (Sprite or MovieClip) objects one on left on the right.  All display list container objects have their own scene

  jou can so easily the steps as much as you want each independently controlled placed anywhere you want.

• stuck on the preparation of backup time machine

  After 20 hours, system preferences says still "preparing backup...". »

  Backup of 1 TB (330 GB free) iMac

  at the score of 1 TB external drive (170 GB free).

  Save on USB3, using an Inateck, WD 4 TB of disk docking station

  drive already used for Time Machine.

  Last backup 6 months ago.

  I can feel humming of backup disk, so something's happening.

  Any ideas? I started again the next day, still on the "preparation of backup."

  Please follow the troubleshooting steps in the end of Pondini guide, located at Time Machine - troubleshooting

• Cannot set attribute of the param element value using javascript in setAttribute

  When adding the items param via createFragment the javascript in setAttribute function does not set the "value" attribute It is necessary to set the nodetext to add this attribute to the value of the param element.

  Second, when using the method of the generated html code defines the 'value' to the innerHTML. HTML code resulting in the display by "Inspect the system" looks like this.

  < parameter id = "myID" > myValue < / param >

  Note: [the element close text < / param > is displayed correctly using inspect, but when using file-> SavePageAs the end text is not saved correctly.] I reported this in another question of moz. support FF.]

  function setparamAttrs (parmID, parmVal)
  {

  var gData = document.createDocumentFragment();
  

   var newNode = document.createElement("param");
   var textStr = document.createTextNode(parmVal);
   newNode.appendChild(textStr);
  

   newNode.setAttribute("id", parmID);
   //newNode.setAttribute("value", parmVal);  // this does not work
   //newNode.setAttribute("innerHTML", parmVal);  //this does not work
  

   gData.appendChild(newNode);
   document.body.appendChild(gData);
  

  }

  However, I was able to retrieve the "value", once it has been added using:

  var val = document.getElementById("parm0").value;)

  getAttribute ("value") does not work either.

  Finally, I added the param elements to my HTML code like this.
  < parameter id = "myID" > myValue < / param >. Then I tried to extract the value using document.getElementById("myID").innerHTML. No text has been returned. When I looked at the HTML document with inspect my HTML param element is displayed as < param id = "myID" > myVal. The closing text of the element has not the same when I use SavePageAs which I mentioned previously.

  Yes, this is the correct way to this code and it works for me without any problem.

• all my computers cannot be started after the automatic updates!

  Since the installation of the automatic updates on all 3 of my computers, none of them does not start, I just get a black screen. The only way I can do is turn it restarts and struck the whole upward, then click, use it at the last configuration, while it was working properly. Both xp and a vista. Help!

  Hey Nico SJ,

  This http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/why-do-i-have-a-black-screen-when-i-start-windows/ddf978da-4ba1-49dc-8844-2407c3fc1c82 thread can be useful.

• Cannot set Outlook as the default e-mail application

  I use a version of the MacBook Air and OS X El Capitan 10.11.3. I want to configure Outlook as my default mail application and mail-> Preferences I changed to Outlook, but when I close the application email, the default application change again in Mail. In addition, do not get this option to set a default in the preferences in Outlook.

  Please help how to fix this problem.

  Thank you.

  Although the problem is not the same, please follow the instructions in this article to support to reset the launch Services database.

  Instead type the command as shown in the article, I suggest that you copy and paste the web page in the Terminal window. Make sure you only select the whole line before copying. One way to do that is to triple - click anywhere in the line.

  If you do not already have a current backup, back up all data before proceeding. You should perhaps log out or restart to see a change.

• my windows live mail cannot be started because the calendar contains corrupt data, forcing them to close. What should I do now

  See above the title

  ElizabethDean,

  Thanks for posting your question in the Microsoft answers Forum. For questions about Windows Live Mail, visit the Windows Live e-mail community.

• STARTING in the same column several times with 2 different condition

  Hello world
  
  I have a small question, but I can't find the answer. Can someone help me with this one? Look at this example:
  

  WITH T AS (
    SELECT 'a' as Name, 1 as v FROM DUAL
    UNION ALL
    SELECT 'a' as Name, 2 as v FROM DUAL
    UNION ALL
    SELECT 'a' as Name, 2 as v FROM DUAL
      UNION ALL
    SELECT 'b' as Name, 1 as v FROM DUAL
      UNION ALL
    SELECT 'b' as Name, 1 as v FROM DUAL
      UNION ALL
    SELECT 'b' as Name, 2 as v FROM DUAL
  ) SELECT DISTINCT name, 
           COUNT(DECODE(v, 1, 1, null)) OVER (PARTITION BY name ORDER BY v) as v1,
           COUNT(DECODE(v, 2, 1, null)) OVER (PARTITION BY name ORDER BY v) as v2
      FROM T
    ORDER BY 1;

  This returns:
  

  NAME V1                     V2                     
  ---- ---------------------- ---------------------- 
  a    1                      0                      
  a    1                      2                      
  b    2                      0                      
  b    2                      1                      

  But what I need in a single row with the count of 1 and 2 by name. How can I get without using subqueries as (the following query returns the correct result)
  

  WITH T AS (
    SELECT 'a' as Name, 1 as v FROM DUAL
    UNION ALL
    SELECT 'a' as Name, 2 as v FROM DUAL
    UNION ALL
    SELECT 'a' as Name, 2 as v FROM DUAL
      UNION ALL
    SELECT 'b' as Name, 1 as v FROM DUAL
      UNION ALL
    SELECT 'b' as Name, 1 as v FROM DUAL
      UNION ALL
    SELECT 'b' as Name, 2 as v FROM DUAL
  ) SELECT DISTINCT t.name, 
           (SELECT COUNT(*) FROM T z WHERE z.name = t.name and z.v = 1),
           (SELECT COUNT(*) FROM T z WHERE z.name = t.name and z.v = 2)
      FROM T t
    ORDER BY 1;

  The table I'm working on that has millions of records with subqueries it takes forever to run. The one with the analytical function takes less than 3 seconds.
  
  
  Thanks for your help!

  If I understand correctly, you need a global tally, not an analytical account. Something like:

  SQL> WITH T AS (
    2    SELECT 'a' as Name, 1 as v FROM DUAL
    3    UNION ALL
    4    SELECT 'a' as Name, 2 as v FROM DUAL
    5    UNION ALL
    6    SELECT 'a' as Name, 2 as v FROM DUAL
    7      UNION ALL
    8    SELECT 'b' as Name, 1 as v FROM DUAL
    9      UNION ALL
   10    SELECT 'b' as Name, 1 as v FROM DUAL
   11      UNION ALL
   12    SELECT 'b' as Name, 2 as v FROM DUAL)
   13  SELECT name, COUNT(DECODE(v, 1, 1, null)) v1,
   14           COUNT(DECODE(v, 2, 1, null)) v2
   15  FROM T
   16  GROUP BY name
   17  ORDER BY 1;
  
  N         V1         V2
  - ---------- ----------
  a          1          2
  b          2          1
  

  John

• How can I stop firefox 29,0 start with the page tutorial every time I open it?

  I get 2 tabs opening are the tutorial page and the other is my home page. Very annoying and me are gone through any step hoping this would complement something and had no chance to solve this issue.

  Hello, this can happen when firefox is not able to correctly save preferences in the profile folder. Please try this: click the menu button

  

  then click on help

  

  > troubleshooting information > profile folder - 'display the folder '. then a new window will open. in this search on a file named user.js window (it can be used to overwrite your custom settings). where it is present, delete or rename this file and then restart firefox.

  For more information and other steps, please also see: How to fix preferences that will not save