positioning error message

Similar Questions

• Several Windows error messages that I need to fix, the list is in position.

  I wrote error messages that appear when I restart my computer. The list is below. How can I fix them?

  sink to receive asynchronous callbacks for WMI client applications
  Microsoft Sync Center
  Task Scheduler Engine
  the collection file is not valid or is corrupted. new empty collections file was created
  ezdockconfig.xml Init failed
  media center media status aggregator has stopped working
  Control Panel HD audio has stopped working
  persistence module stopped
  module igfxsrvc has stopped working
  Hkcmd module has stopped working
  igfxtray module has stopped working

  Hello

  1. Since when are you facing this problem?

  Method 1: Run the fixit available in the article below

  When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank
  http://support.Microsoft.com/kb/925704

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• How can I disable the sound when an error message appears?

  There is an anoying sound when an error message appears in FF. I looked in preferences, but it doesn't seem to be an option to turn it off.

  https://www.liberiangeek.NET/2013/07/how-to-change-or-disable-the-alert-sound-in-Ubuntu/

  Parameters can change a few years under Ubuntu, but this gives an idea where to look.

  Firefox itself has no such sound notifications.

  #367259 said

  maybe try to turn off the sound error in operating system Windows/preferences
  not sure if FF has its position about the error of his

  It's Linux and not Windows, but you're on the right track.

• Can't BUY iPhoto book - Error Message "incomplete book." Problem with the theme "photojournalism"?

  The use of iPhoto 11 on Mac OS X

  Problem - can not BUY iPhoto book

  Error message - 'Incomplete book'... images on one or more pages contain no pictures

  WORKFLOW

  Choose the theme - 'Photo Story' / connected / large

  Create the Layout - Standard 20 pages of Photos and text

  Overview of TEST Version 1 - Export PDF OK - OK - BUY OK

  Create the duplicate - save to Version 2 - Triangles of yellow lights appear on all pages!

  Version 2 - OK - OK Preview - PDF Export BUY FAIL - same mistake

  Create copies - Save to Version 3 - Reload Photos/text/background on all pages until each yellow warning Triangle disappears

  Version of TEST 3 - export to PDF OK - OK Preview - BUY still FAILS - same mistake

  Create the duplicate - except for Version 4 - everything looks good - Triangles of yellow signaling No.

  Trial 4 - export to PDF OK - OK Preview - BUY still FAILS - same mistake

  RETEST Version 1 - export to PDF OK - OK Preview - buy always OK

  Search and read help files, Support from Apple, cat competent bodies and try the suggestions - many people have struggled with similar issues.

  Eventually repair and then rebuild the iPhoto Library - everything seems fine.

  TEST Version 1 new - BUY always OK.   All other Versions - BUY still does NOT work

  Create duplicates - save to Version 5 - try to change the theme to 'photo book '.

  TEST Version 5 Overview - Export PDF OK - OK - OK NOW!

  BUT - all completely scrambled and useless page layouts

  "Photojournalism" is the only theme that works well for this Album

  Version 1 cannot be used because all the pictures/text/Layouts are now improved

  2 days wasted trying to buy a book in iPhoto from Apple...

  At least I have a good PDF of Version 4 I can take for local printing

  IT OF JUST A BUG?  IS THERE A SOLUTION?  -IS THE NEW APPLICATION 'PHOTOS' ANY BETTER?

  You can buy is more books of photos with iPHoto (or opening) - Apple dropped that service 03/31/2016

  You must use Photos or a third party - PrestoPhotos States that they can print and above all of the positive comments on the results in the opening forum - I don't personally used them

  And the error you are getting is not wrong - you have not one or several photos missing in your book - usually a background picture full page covered by another photo, so you don't notice it

  and you don't say how you are seen, but it's the way recommended - Preview of a project on paper in Photos or iPhoto to avoid problems - Apple Support

  LN

• CD burner related error messages

  Hello, I was wondering if someone could help me? I had a problem with my cd burner, it keeps saying that I have an error. When I manage to save it on the cd it he damaged and then still doesn't work.
  no idea how I might be able to sort it out?
  Louise

  [Edited by: admin on 2 October 05 18:08]

  Hello

  It will be interesting to know what error message occur exactly. Drivers for CD or DVD burning problems are not easy to locate. If the player doesn't work correctly there must be several reasons. The lens may be dirty, problem with the calibration of the lens or different media can not be read correctly. The only thing you can do is check the process of engraving with a few different burning software and the media.

  JP troubleshooting has been quite right. If there is no positive result and if the warranty is still valid, contact the customer Service of your country partner and let check the unit. I am really out of idea what you can try from here. Perhaps remove device from Device Manager and reboot the device, but I don t think this will help.

  Good bye

• fminsearch error message

  When I try to use fminsearch, I get the error message "LabVIEW: the given name does not match a knowledge function, variable, or symbol."

  For example, I defined a function 'testfn' by a m-file called "testfn.m" containing

  funtion z = testfn(x,y)

  z = x ^ 2 + y ^ 2;

  return

  and I record it in the current directory, and I make sure that this directory is the path. Also, when I try like this

  testfn (1,2)

  the function does not run, and I return the correct value.  But when I type

  X = fminsearch('testfn',[1,1])

  I get the error message.

  However, if I type

  x = fminsearch ('sin', [1])

  I'll be back x = 1.5708, so fminsearch itself seems to work for me, and I feel that I understand the syntax.  I don't know how to tell where to look for my position.

  Thanks for any help!

  Hello

  Your function should not accept multiple entries. And the only entry must be a vector.

  http://forums.NI.com/NI/board/message?board.ID=MathScript&thread.ID=361

• HP Color Laser jet 5500 dtn: PCL XL error message

  I am trying to print a document that includes images and I get the following error message:

  PCL XL error

  Subsystem: IMAGE

  Error: ExtraData

  Operator: consulterles

  Position: 590

  Can anyone help?

  If the error is repeatable (i.e. exactly the same when the reprint of the same document, the same driver on the same unit), then it is likely that it is caused by a driver (or the driver settings) fault.

  There may be a driver available, or (according to the printer model) you may be able to switch to a driver using another Language of Description of Page( PCL5 or PostScript instead of PCL6 (the name of 'marketing' for PCL XL PDL)).

  If the error (s) is/is random, they are much more likely to result from intermittent corruptions of the stream impression generated between the desktop and the device (cable control, ports, switches, etc.).

  With the PCL XL error information, it is possible to compare a (repeatable) error with an analysis of a print stream (captured using the option "print to a file") and (sometimes) work out what was wrong with the operator at the given position (which indicates the number of operators until and including wrong) and so (maybe) lead to a workaround.

  Such an analysis can be performed using the PRN file analysis tool in the whole PCL app, available via http://www.pclparaphernalia.eu

• How can I fix Vista 64-bit OS on a HP that keeps generates error message: Windows Explorer has stop working. wait, restart, or shut down.

  It seems after I did a disc clean up around an update of the system of MS, I started having sites is not responding message 'updating of web page' and other this same message if I do not know
  "Windows Explorer has stopped working, wait, restart or close the program.  What is the cause?  I don't have a Vista disk... it came with my HP dv5 Pavilioin.

  If anyone has any ideas... Please help...

  Thank you

  I told you to do many things. What you have tried and what you are still trying (if we can get a happening of todo list and I can check it)? Have you managed to find the results of chkdsk?

  Copy and paste so the formatting is good. It is a single line. If you get an error message, you can copy it by right-clicking in the window, choose the brand, by selecting the text, and press ENTER.

  There are communes of false positives of SFC so do not assume that something is actually corrupted until we see what files it complains. Settings.ini, desktop.ini, tcpmon.ini and ending with mof files are false positives.

   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

   

• Very anonying .dll error message at startup

  My desktop computer running Windows Vista Home Premium Service Pack 2. During each boot, I get the following error message very annoying:

  Error loading C:\Users\Anonymous\AppData\ Local\deconl.dll the specified module could not be located. The position at the top of the message is RunDLL.

  It's annoying because it appears during each start-up and must be X'ed off the coast to get rid of him. I haven't noticed a problem with the functioning of the Office because of the apparent absence of this .dll file specified. It's just that it's annoying, it happens every time you start, and it must be X'ed to disappear.

  I scoured the Internet looking for the file to replace the missing file on my computer, as if it was even the correct option, I don't know. Anyway, I can't find it. Can someone please? I do not know whether the file should replace or what; I would be happy if I could just get the error message stop appearing. Thank you all.

  Thanks to you all. I found the problem. I should realize it earlier. I had already looked at the file name on the Internet and read that he was possibly malicious. I finally realized that it was probably in the quarantined MaAfee section and it was. It is an entry point for a Trojan that had also been quarantined. I took care of him. All's well that ends well.

  Hello

  If you are not facing this problem in Mode safe then the best option to solve this problem is to perform the clean boot. Clean boot recognizes the program that is causing the problem. Once you find what program this is the case, you can go ahead and try to fix the program that is causing the problem. Most of the non-system are running processes can be stopped by the boot because they are not responsible for the operation of your operating system.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

• How to uninstall Windows Live Mesh Remote desktop. I can't uninstall it & it continues to send an error message?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error messages
  How to uninstall Windows Live Mesh Remote desktop.  I can't uninstall it & it continues to send an error message?

  Hello

  What is the error message?

  If you have enabled Live Mesh Remote Desktop, you must be running Windows Vista as an administrator (a type of user account that allows full access to the computer,
  including the ability to install programs and manage other user accounts.) to uninstall the Live Mesh software.

  You can also post your query on the Microsoft Forums Live Community assistance as experts it will be in a better position to help you.

  Here is the link:
  http://www.windowslivehelp.com/

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OfficeJet Pro 8600 false jam transport error messages

  I have two circular messages on my 8600 Pro. The first is that there is a jam in transport. "The print carriage cannot move", it is said. "Open the door ink cartridge access, varnish any jammed paper or obstructions and selec OK." But there is not any paper jam. I checked all sources of paper and they are clear. I also tried to remove one of the ink cartridges, how the cart moves happily all the way to the right and go back to the change cartridge position, with no problems at all.

  Erase this message and you get a cartridge problem... Blah, blah, blad... one or more cartridges is damaged. No they are not. Remove them and replace them all with new, same error message.

  Erase this message and you are to the cartridge jam.

  I tried the 15 second cord reset and remove the printhead (which seems very well). Any other suggestions?

  I love this printer - best thing HP produced in ten years - and I don't want to go back to work!

  It was the black cartridge. First of all, the one I tried. So the good news is, now, I have two of my favorite printer...

  Can't believe that no one else has had the same problem!

• Error message from Windows Services

  I have two laptops XPS 1530 under Windows Vista Ultimate; one is a 32-bit system and the other is a 64-bit system.  Two systems will sometimes have an error message "Host Services arrested".  It doesn't seem to be an answer to this problem on the MS site and Vista can not find a solution.  Does anyone have any suggestions?  The only programs loaded on two laptops is Office Ultimate 2007 and ITunes.  Ralph W. Furlong

  Just look around the place at similar positions seems to indicate that it is a driver problem that will not be eliminated until a properly written driver is to be published by HP.

  HPZ12 is a reference to HP Print Management Language, do you have other installed software associated with printing and scanning provided by HP, maybe something like "HP Digital Imaging Monitor"?  If Yes can you remove your printer and reinstall your printer with just the basic drivers needed for printing and without all the bells and whistles provided by HP?

  http://www.Google.com/search?q=Svchost.exe_Net+driver+HPZ12&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

  This help you trace the history of the problem and maybe consider buying another printer or acceptance of having to live with the problem until HP get their driver sets?  If it is a new machine (and printer) it is also time to consider the various options under any warranty.

  Use reliability monitor to troubleshoot
  http://TechNet.Microsoft.com/en-us/library/cc749583.aspx

• Windows 7 message Boot error message

  Microsoft has recently made an update on my Windows 7. During the upgrade, Windows malicious software removed what she claimed it was a virus. That took place, I constantly get the message: "this file has no program associated with it for performing this action. Please install a program or, if such is already installed, create an association in the default program control panel. "The file that causes the problem is located in the Users\***\appdata\roaming\7d402\e52ee.4a4c23.

  I am not in a position to determine what this file is located or what it relates to. I have tried to delete, but Windows then gives me an error saying that the file is not found. Can someone advise how I can understand what is the file or how can I stop Windows trying to load during the boot process?

  Singh, I followed the procedure recommended you and it turns out that the file is a Microsoft Windows operating system startup file: this is the path to the file: C:\window\system32\cmd.exe /C start * * C:\users\paul gruen\appdata\roaming\7d402\e52ee.4a4c23.

  I unchecked the box, and the error message disappeared. However, I don't know how this will affect my computer. So far, everything works fine.

• BlackBerry Smartphones blackBerry AppWorld comes out with an error message and even that the account of Blackberry ID (inaccessible)

  Hello!! Appworld does not open. Instead it will show an error message (it is a problem with the current Session. Please sign in to continue. Error ID: 30702). While the Blackeberry I intend to come out of this message (unable to update your Blackberry ID account information). I use a blackberry Torch 9810 with 7.0 on this OS. Please, what can be done to remedy this disorder. COS I already tried to uninstall the software and reinstalled again still with no positive results.
  P.S: it works fine before. The blackout began about 3 weeks ago.
  Thank you

  Hello

  Here's a knockout who deals with these errors:

  • KB28212 "Unable to connect to your BlackBerry ID account" or "Impossible to update your BlackBerry ID account information" error occurs on a BlackBerry smartphone running BlackBerry 7

  I hope that it contains something useful! There are also several existing threads on this site, which discuss that exact error... your opinion of those who may prove useful, and a search of this site, by using the code, or an error message should reveal all the existing threads that are applicable to you.

  Good luck and let us know!

• Download other store apps that require a GPS location leads to error messages.

  Original title: Maps
  My position has stopped working over the weekend. Download other store apps that require a GPS location leads to error messages. What have I done?

  Hello

  -What are the error messages that you receive when you download apps? (This will help us find the cause of the problem)

  We will check your zone settings, if they are configured incorrectly to correct us and check if this solves the problem.

  a. on the start screen, enter the Date, press or click settingsand then press or click on define the date and.

  b. the Date and time tab, tap or click on change of time zone.

  c. check if the zone settings are right depending on your region. If you find not bad, change it accordingly and click on apply, Ok.

  Also to synchronize the time on the computer with Internet server by using the step below:

  a. on the Internet time tab, tap or click on change settings.

  b. check the box synchronize with a time server Internet and then tap or click Update now.

  Restart the computer and check that it works very well. If you experience additional problems, you can reply to this post.