Positioning of text in the Flash element

Similar Questions

• function which checks if the input text is the same as the text in the Flash file

  Hello!

  I'm doing a Flash AS2 project for learning the word and I would like to know your opinions and your advice on this topic:

  I have Word check the task, where you have to write (text input) the correct names under these 3 photos and check if you wrote them properly with the key - "CHECK!"

  It would be simple, but it is mandatory that the text of the inscription must be compared to a text file and then checked if they match.

  I added a picture to better understand...

  

  Is this possible in AS2?

  Thank you!

  you don't know.

  Use the text property of the textfield object and load the text file using loadvars.  you will have to parse text loaded using the string of flash (and perhaps array) methods.

  p.s. that apple looks more like a tomato for me.

• Since the last update, the flash elements are located and flickery

  Hi all

  First of all, I'm under IE9 on Windows 7 64 bit. So far, 64-bit has proved more trouble than it is worth. My graphics card is an Intel HD graphics card.

  That said, since most recept update Flash, it has malfunctioned. A Web site based on flash and Flash-based advertising works very strangely. The announcement (or other) will appear in the upper left corner of the screen and constantly (and annoyingly) sparkle in and out of existence. I can still "communicate" with it by clicking on it, where it SHOULD be on the Web page (but not when it actually). It's can be ignored until now, when a school project forced me to use a flash element that I can't use.

  Please note that Flash has worked perfectly well on this computer until this update.

  Help please :)

  Thank you!

  I doubt that you have the latest version of Flash Player (10.3.181.23), as she corrected exactly the symptoms you describe.

  Check your version of Flash Player to http://www.adobe.com/software/flash/about/

• Positioning of text in the block

  Hello

  I am wanting to position text in a box/block, here are the items in the list that I used as navigation buttons.

  I set the size of the box and that you have selected 'center' for text positioning, this positions the text in the Center horizontally ok.

  I would like to know how to position the text to the Center verticially so?

  Thank you very much

  Mark

  Markcronin123 wrote:

  Hello

  I am wanting to position text in a box/block, here are the items in the list that I used as navigation buttons.

  I set the size of the box and that you have selected 'center' for text positioning, this positions the text in the Center horizontally ok.

  I would like to know how to position the text to the Center verticially so?

  Thank you very much

  Mark

  Short answer is that if you are using a

  You can do this with reliability. For now, css has no property that will allow you to center the text vertically in a container.

  You can center a single line of text using the css line-height property, but you must set the area a specific height, which is not a good solution.

  You can use padding-top: XXpx; to set the text for the top of the box but it will never vertically centered in the browser for everyone. There is a css thing oem simply not do again. But the advantages outweigh the disadvantages.

• Help text for the dynamic elements

  Hi all

  I created a few dynamic elements using utility APEX_ITEM. Can provide us the help text to these elements in a pop-up window or APEX how do in-house?

  This requirement is feasible?

  Thank you

  Sunil Bhatia

  Oh,.

  I solved my question itself. For all those interested in this, we can do it like this:

  "onmouseover =" toolTip_enable (event, this, "this is a bubble"a tooltip")" ' ' in APEX_ITEM. Argument p_attributes TEXT of

  APEX_ITEM. (TEXT)

  p_idx in NUMBERS

  p_value IN VARCHAR2 DEFAULT NULL,

  p_size in NUMBERS by DEFAULT NULL,

  p_maxlength in NUMBERS by DEFAULT NULL,

  p_attributes IN VARCHAR2 DEFAULT NULL,

  p_item_id IN VARCHAR2 DEFAULT NULL,

  p_item_label IN VARCHAR2 DEFAULT NULL)

• Problem of positioning of text at the top of a block of text

  Hello

  I've had this problem for a long time with InDesign and I am finally at the point of duty to sort (in lieu of the creative solutions of non-parfait).

  For some reason, in some of my frames of text, I can't get the first line of text to be positioned just above.  Here is an example.  It's the strangest thing. In an exercise, it is fine (using the same paragraph style). In the next exercise, sits lower.  I can't sort. At one point, I thought that it was my choice to police, but this seems not to be.

  Any ideas?

  Susan

  

  Just to check what is evident first of all, you have the text aligned to the top of the box?  Select the text box and go object > Options of text block and under the control of the Vertical alignment, he says 'Top '.

  Then, the text does not have a vertical offset applied?  It's the little box in your control panel that looks like this:

  

• prohibit certain data in the text of the datetime element

  Hello!
  
  I am trying to ban the user of the datetime object by entering at the hour of midnight (00:00 MON-DD-YYYY). Basically the user can tab itself out of the text element after inserting the day month and year. I want to make sure he is forced to set the hour and minute also.
  I looked in the property palette but I don't seem to find any with which I can do.
  
  THX,
  Iulian

  Set

  Field Datatype : DateTime
  Format mask : DD-MON-YYYY HH24:MI
  
  In When-Validate_item Trigger check ...
  If to_char(:date_field ,'HH24:MI') = '00:00' then
    message('Enter Proper time along with date. Not allowed to enter mid-night value or null time ');
     raise form_trigger_failure;
  end if;
  

  concerning
  Dora

• Specific text of color in the listview element

  Hello

  I have in my application:

    ListView {
          id: myListViewAya
  
          dataModel: dataModelAya
  
          listItemComponents: [
  
          ListItemComponent {
                  type: "item"
                  id: listItemComponent_Aya
             Container {
                // background: Color.create("#75b5d3")
                 Label {
                     id:label_Aya
                     text: ListItemData.id
                     textStyle.color: Color.Blue
                 }
              }// end of Container
          } // end of ListItemComponent 
  
          ] // end of listItemComponents list
  }end of ListView 
  

  I want the text 'label_Aya' (the second element in the listview) and all other elements of color in 'red '.

  Blue

  Please help me

  Thank you very much

  as it works well:

    ListView {
          id: myListViewAya
  
          dataModel: dataModelAya
  
          listItemComponents: [
  
          ListItemComponent {
                  type: "item"
             Container {
              id: listItemComponent_Aya
                // background: Color.create("#75b5d3")
                 Label {
                     id:label_Aya
                     text: ListItemData.id
              textStyle.color:(listItemComponent_Aya.ListItem.indexPath[1] == 1) ? Color.Red : Color.Blue
                 }
              }// end of Container
          } // end of ListItemComponent 
  
          ] // end of listItemComponents list
  }end of ListView
  

  Thank you thank you thank you...

• How to make the text in the header change with scrolling effects?

  Im trying to do a header which changes when you scroll the page. I know how to make the text scrolls and back according to the key position, but his does not work if my key is less than my position of text on the page.

  Ideally, I would like to get so that I scroll to the area of 'Wine', the previous header will slide out and 'Wine' will slide in from the left.

  Any ideas?

  You can try these:

  http://musewidgets.com/products/Parallax-list

  http://musewidgets.com/products/three-box

  Thank you

  Sanjit

• How to make a slideshow of heroes with the text and the button for each slide?

  I'm trying to make a basic slide show (auto no buttons) which will be the width of page 100% and I want each picture to have a title and a status button they can click to access other pages, for the life of me I can't this is! What I am doing wrong?

  Indeed I could solve my problem, yay 2 + hours of troubleshooting finally paid off!

  I tried the white color text and read 'Check this video now!', but the background was a color of the light, so it is in contradiction with the white text. To remedy this problem, I created a rectangle shape, he made black and reduced the opacity to 40% and threw it behind the text. In order to get the button under the text that says: 'Click here'! I was able to use a copy + paste glitch by sticking the trio in the caption text box for an image, thus allowing me to have a unique caption for each photo in an automatic slideshow. The problem arises due to the notion of a chart of the icon to stay on the text no matter how it is pasted into the text box but I could understand that if you group the text above the rectangle elements before pasting in the text area of the legend, then the text will remain on the chart! Yay problem solved (at least for now)!

• Help Popup not rendered HTML based on the referenced element.

  I have a named item & P104_GENDER on a page that references a hidden item, which is calculated using a calculation that uses a database function to retrieve data to help for the item and fill in the hidden element.
  
  So for this article, is the source of help & P104_GENDER_HELP. & P104_GENDER_HELP is filled with "Please enter a sex. Possible values are: & lt; BR & gt; -Male & lt; BR & gt; -Female' according to the debugging session.
  
  
  When I click on the label to display the context-sensitive Help window, it displays: "Please enter a sex. Possible values are: & lt; BR & gt; -Male & lt; BR & gt; -Female. "
  
  Apex 3.X, the HTML would render correctly and it would display:
  
  Please enter a sex. Possible values are:
  -Male
  -Female
  
  But in Apex 4.0, it makes just the text as if it had no HTML implementation involved form, i.e. "Please enter a sex. Possible values are: & lt; BR & gt; -Male & lt; BR & gt; -Female. "
  
  However, if I put the source directly for help on the question "Please enter a sex. Possible values are: & lt; BR & gt; -Male & lt; BR & gt; -Female", without reference to the hidden item, it renders properly in HTML format.
  
  I tried to change my label template to use javascript:popupfieldhelpclassic instead of the javascript:popupfieldhelp function, but I get the same wrong result.
  
  When I looked at the source that is generated in the pop-up window when you reference an element hidden, is to convert the < and >, symbols of "& lt" and "& gt" respectively, which means it does reference the text from the element hidden in the form of literal text and convert anything that resembles HTML in plain text instead of treat it only as HTML. I can see why this would be useful for some people, but it's not so useful to me, especially since he is used to the opposite effect.
  
  They have both have in common, is that they use the wwv_flow_item_help.show_help function. I guess that the culprit lies in this encapsulated code.
  
  Anyone has an idea on how to work around this problem so that text coming from referenced items analyzed and presented in HTML format instead of literal text?
  
  Thank you very much.
  
  Published by: user12021046 on December 15, 2011 13:51
  Changed for good formatting HTML :-)

  Ah, now I understand!

  So I think the problem is, when you click the label, he calls a procedure that returns the text of help via AJAX. In my view, this procedure escapes html tags, and from what I can tell, there is no setting to disable. :( Even if you load classic help, these tags are also escaped. There may be tweaks that I don't know, but I looked into the security of the shared components section, but nada.

  So a possible solution?

  If you look at the label, you'll see that it links to the following function:

  function popupFieldHelp(b,a){
       if(!$x("pScreenReaderMode")){
            apex.jQuery.getJSON("wwv_flow_item_help.show_help?p_item_id="+b+"&p_session="+a+"&p_output_format=JSON",
            function(c){
                 var d=apex.jQuery("#apex_popup_field_help");
                 if(d.length===0){d=apex.jQuery('
  '+c.helpText+"
  ");
                      d.dialog({title:c.title,bgiframe:true,width:500,height:350,show:"drop",hide:"drop"})
                 }
                 else{
                      d.html(c.helpText).dialog("option","title",c.title).dialog("open")
                 }
            })
       }else{
                 popupFieldHelpClassic(b,a)
       }
       return
  }
  

  A quick and dirty solution would be to replace the escape with their html tags characters so that it is rendered correctly

  that is, add the following:

                 c.helpText = c.helpText.replace(/</g, '<');
                 c.helpText = c.helpText.replace(/>/g, '>');
  

  -These forums are not keep what I write here, I'm sure you can understand what im speak well.

  Of course, change the label template to point to your custom function.

  The other solution I was going to suggest was to write your own application process that gets you some JSON - Martin D'Souza has written a blog on the use of the apex_util.json_from_sql; which is what you would probably use a query such as:

  select label, item_help_text
  from apex_application_page_items
  where item_id = apex_application.g_x01
  

  The problem is the text of the done element refers to another page, so it would return to the value chain e.g. & P12_ITEM. of course it wouldn't be to hard to get around.

  for example, select replace (item_help_text, '&' | apex_application.g_x02 |'.) (', v (apex_application.g_x02)) item_help_text
  of apex_application_page_items
  where item_id = apex_application.g_x01

  (not tested)

  and then as a quick primer to a way of doing AJAX

  1. create a htmldb_Get object: helpText var = new htmldb_Get (null, null, "APPLICATION_PROCESS = nom_processus");

  Where nom_processus is the name of an application process that you create

  2. Add the necessary parameters

  helpText.addParam ("x 01', 'itemId')
  helpText.addParam ("x 02', 'P12_ITEM')

  This is to add temporary variables that can be reference via apex_application.g_f0x; the alternative is that you can add paremeters State session with

  helpText.add ('nom_element', 'ITEM_VALUE') and get sent when you call the object's get() function.

  3. get the JSON and parse
  obj = JSON.parse (helpText.get ());

  Then create the http://jqueryui.com/demos/dialog/ for the help dialog box

  ..

  Well I hope that gives you some ideas / a starting point.

• Flash elements disappear after (DW CS3) updates

  Hello

  I've had this problem for awhile now and I've usually been able to create a work-around, but now it becomes really frustrating.

  I have sites that I created using flash-heads and them in my site templates.  Now, every time I come back to a particular file to make the changes or updates and to recharge the flash element on the server will not be displayed anymore.  Even though I've looked at the code and see that the script codes that are required are still there.

  Any thoughts? Y at - it an update of DW, I need to install?

  WhyteTyger.com - then look at WhyteTyger.com/services.html to see what I mean.

  Thank you

  Kim S

  I think I spotted something odd in your code, the path to the ac_runactivecontent.js:

  
  
  and the other one is:
  
  
  
  they are different, check that out
  
  houston web design
  

• Spry collision with Flash element

  I have a Web page with a spry drop down which falls on a flash element and works fine on Mac/Firefox, but display correctly on PC/IE. What can I do in addition to move the flash element?
  Hover over the button of Solutions for getting the error.
  
  http://www.learn.NET/index.html

  Thanks for the fix. It works perfectly.

• Basic question on how to change the menu text in the FLA file

  I'm kind new to Flash and I'm a little stuck on where I'm supposed to change the menu text in the flash file I bought (link below).
  I can see where to change the hyperlinks in the action script for each menu item, but I can't find the text (for example I want to change the word 'Our gallery' and type 'Compétitions'
  
  http://www.abcpchelp.com/header3_fv8.fla

  Thank you!
  This forum is very good

• CSS positioning of elements of PA for the text on the question of background image

  I'm relatively new to dreamweaver from frontpage in the dust. Some things have been easier or I'm missing something. My client site uses backgrounds customized site on most pages, and I just want to understand how the text of the provision above. From what I've read, it seems that using AP elements is the most appropriate at this stage of the construction.

  I can't to the do stay where I want that they. They are fine until you go full screen, then they move to the right. I need to find a way to keep them in one place no matter what. I'm sure you get the idea. Any help would be appreciated.

  http://www.homeworks4u.ca/Sitemap_Homeworks4U.html

  Non-living sites. I'm just waiting for text... and trying to figure out how to do so that he can stay on top of my baggage without messing with my menus.

  Thanks in advance,

  Scott

  APDivs (formerly known as layers) are NOT the best approach for this.  Here's why:

  http://apptools.com/examples/pagelayout101.php

  (1) find a good, shaping CSS to get started with.

  http://ALT-Web.com/templates/basic-1-Col-fixed.html

  (2) a text on a complex background image alignment is futile.  It is a concept of impression that Won't hold up on web pages because you can't control the browser settings, the screen or the text sizes.

  (3) height is a restriction in all browsers except IE.  Don't use values of height on containers with text inside them because this will inevitably cause failures when the text size is increased or amount of content exceeds the available space.

  (4) if necessary to show a background image, use the min-height CSS property.

  Tables to CSS Web Design part 1-
  http://www.Adobe.com/devnet/Dreamweaver/articles/table_to_css_pt1.html

  Tables to CSS Web Design part 2-
  http://www.Adobe.com/devnet/Dreamweaver/articles/table_to_css_pt2.html

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web-design.blogspot.com/