Possible bug in 2015 CC LR

Similar Questions

• Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug? Thank you

  Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug?

  When the same text is seen in another browser, it is displayed correctly as "two."

  The same question is displayed on another computer.

  Thank you.

  Sounds that you use a font that supports ligatures (Palatino?).

  • http://en.Wikipedia.org/wiki/Ligature_%28typography%29

• possible bug in match pattern string of dot and a special character

  Hi friend recently and I find something in game chain model that it looks like bug, I want to know labveiw expert opinion on it
  the possible bug is
  have you ever tried to match (.) dot for use in regular expression? this icon could not find the point inside the string? 
  I also think what happens if we try to find a character within a string that is a piece of special character
  for example how you can use this icon to find \b inside the string as (hatef\blabview)?

  [.] to find the period

  \\B to find the backslash b

• Possible bug: save the table with double and extended precision to the worksheet

  If one concatenates an array of double-precision and an array of precision extended with the 'build' vi table, then recorded using 'Write in a spreadsheet file' vi any digits to the right of the decimal are reset to zero in the saved file. Regardless of the entry of signifier of format (for example %.10f) to the vi 'Write in a spreadsheet file'.

  I'm on Vista Ultimate 32 bit and labview 9.0

  This is a possible bug that is easily circumvented by the conversion of a type before you incorporate arrar in a worksheet. Nevertheless, it's a bug and it cost me some time.

  Hi JL,.

  No, this is not a bug - it's a feature

  Well, if you'd look closer you would recognize the 'save to spreadsheet' as polymorphic VI. As this polymorphic VI does not support the EXTENSION numbers internally (it only supports DBL, I64, and String) LabVIEW selects the instance with more precision: I64 (I64 a 64 bits of precision, DBL that 53...). Your options are:

  -the value of the instance to use as the DBL (by right click and "Select type... »)

  -make a copy of this VI, save it under a different name and make support number of POST (not rework the polymorphic VI like you would break compatibility with other facilities of LV or future revisions)

• Possible bug on role assignments

  I am using SOA/BPM 11.1.1.7.

  I found a possible bug when you deploy a BPM Application which mixed assignments (some directly to one user, others to a role of Application BPM (created in the workspace).

  I did two tests.

  Test 1.  Created a project/process of BPM with two lanes.  In organization, I assigned the roles of corridor users (to the embedded Weblogic LDAP).  On deployment, these roles were driven from the area space of work/Administration/roles (when logged in as a Weblogic).

  Test 2.

  In the workspace I created a few BPM roles (and put assignments users), then in a project of assigned BPM Application roles to my role of corridor.

  However, I created a corridor and made the assignment directly to the user.

  On deployment, the role which has been directly attributed to the user at the level of BPM projects has been eliminated NOT to the role area.

  A video of it is here: http://youtu.be/bWtEIRavlEY

  Stuart

  Hi Stuart,

  Could check you how your mapping roles work if you check "deployment of existing objects of update on ' option in organization.xml?

• APEX translated application 4.2 available possible bugs on theme 25

  Hello everyone,
  
  I try APEX 4.2 with reactive Blue theme (theme 25). So far so good. When I tried to do an application translated from my one shot (I don't translate any string, just de-seeded and released the app), I discovered some possible bugs on the page layout. For example, in areas of form, fields with the scope of auto column cannot be aligned in the same line. They are moved to a new line, although in the original application, it works. I know it's easy to fix by setting a specific value in the scope of column. But how can I fix the page layout in the pages who are magicians (with the standard model of region) and fields are placed in the table not div like in the initial application. Is there a difference between a translated application (which is actually not yet translated) and on the initial page rendering?
  
  Thanks in advance.

  Hi Grandmaster,

  I think that you are hit bug 15922307 - model of presentation of the grid of a translation application is not used
  who sets us 4.2.1.00.08. Can you check if you're on this version or if you are still on APEX 4.2.0

  Concerning
  Patrick
  -----------
  Member of the APEX development team

  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Possible bug in a Select NULL-option list

  Hi all
  I tried to use a list to select a tabular form and found a possible bug.
  I have reproduced the issue on apex.oracle.com.
  Please visit http://apex.oracle.com/pls/apex/f?p=38499:2.
  It seems that the fields for 'Display value Null' and 'return Null value are switched.
  Can someone try this and tell me if I'm doing something wrong or it's really a bug?
  
  Kind regards
  Moritz

  Hello

  what I saw bug # 10095760 has been filed for this issue.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• possible bug in class date

  I stumbled upon a possible bug in the class Date. When comparing two dates of November 20, 2007 and on November 22, 2007, I get false logic.
  
  public var expireDate: Date = new Date ("2007", "11", "20");
  public var todaysDate:Date = new Date();
  
  If (todaysDate.getTime () > = expireDate.getTime ())
  {
  this.currentState = "courseExpired";
  }
  on the other
  {
  this.currentState = 'loggedIn ';
  }
  
  todaysDate.getTime (returned): 1198126800000
  
  expireDate.getTime (returned): 1195742469234
  
  But whatever happens, todaysDate wins even if it shouldn't. Courses should have shown have expired.

  probably because the month is zero means the basis therefore 11 December November not :) (I know its not very obvious, but it's like that in flex and java as well).

• possible bug? formatting number 0 is displayed as 4 294 967 295

  This is really two questions in one. First of all, I have a routine that sometimes gives a result of 0, which is * sometimes * displayed in an AdvancedDataGrid column in the form of 4 294 967 295, which I assume is somehow a significant number (more big int?). In any case, I have one ADG with a column defined as:
  
  < mx:AdvancedDataGridColumn headerText = "Remaining work" labelFunction = "rem_work_fmt" textAlign = "right" / >
  
  The called labelFunction is illustrated below:
  
  private void rem_work_fmt(item:Object,_column:AdvancedDataGridColumn):String
  {
  var num:String = numberFormatter.format (item.get_remaining_work ());
  trace ("result:" + num);
  return num;
  }
  Track of exit impressions: "result: 0" as expected, but the number displayed in the grid is sometimes 0 and 4294967295 sometimes.
  
  More strangeness, this only happens to the last column in the ADG. I call the same logic of format on another column and have never seen a wrong result. In addition, the same 'get_remaining_work()' function is called on the same data and the result is properly displayed in a field of text as 0.
  
  Second question, I met a few other possible bugs, I didn't report because I found a work around. How to do that in the beta program?

  LW1001,

  Bugs can be filed in the public bug at http://bugs.adobe.com/flex/
  You will need to register before you can submit bugs.
  Also, if you can attach files to bug to the bug report, it makes it much easier for Adobe to investigate.

  Let me know if you have any other questions/problems.

  Peter

• Possible bug in sv_Harmonic distortion and Noise.vi

  Hello

  I ran into what seems to be a bug in distortion and Noise.vi sv_Harmonic

  I call this VI into a higher level VI which is part of the box sound & Vibration tool (SVT SNR without harmonic (time) (1ch) .vi)

  What is happening is that I sometimes get error 0xFFFFB1A3 (-20061):

  Error-20061 occurred at NI_MABase.lvlibine Waveform.vi:22 > NI_MABase.lvlib:ma_Trap Fgen parameter Errors.vi:1
  frequency must be<= sampling="">

  Possible reasons:

  Analysis: The selection is not valid.

  This error is actually produced in distortion and Noise.vi sv_Harmonic by one of his subVIs (your unique information (complex) .vi svc_Extract) although I'm not able to activate debugging for this VI so I can't dig deeper.

  What seems to be the case, it is for certain fundamental frequencies that result in higher order harmonic which is located very close to Fs/2, you get the error.  I have attached a waveform and a simple VI that generates the error.  My debugging, it seems that the error occurred when the code attempts to extract the harmonic at 5119,53 Hz.  FS/2 is 5120Hz, so it must be valid, but generates an error.

  Thank you

  -mat

  Hey Matt,

  I spoke with R & D and the source of this problem is we're detects peaking at exactly the Nyquist frequency for the 127th harmonic, while it should work, we get the false error. To work around the problem, you can specify the frequency range of 0-126 harmonics as seen in the image below.  Have one less harmonic should not be a big problem as the harmonic 127th is anyway in the noise.  R & D is now aware of the issue and look forward to it.   Thank you!

  

• PS possible bug on Wondows? Value of the radius of the value 0.1 for filter | Sharpen | Smart Sharpen does not at all.

  Hello

  I'm running the PS latest version 2015.1.2 (subscription) - 20160113.r.355 x 64
  I installed it on a Windows 10 computer and on a MAC El Capitan (OS X 10.11).
  

  But there is a difference in what a certain sharpening setting does not work on the Win10 PC.
  

  I chose:
  Filter | Sharpen | Sharpness...
  

  From there everything works OK on the Mac.
  But on the PC, a framework does not at all and it is if I set the RADIUS to 0.1.
  All other values respond normally, while the 0.1 parameter is simply dead (respond well on MAC).

  I (re) installed PS in Norwegian and English (International), but the problem is persistent.
  This could be a bug in the version of PS window?

  
  Concerning

  
  Erik Aaseth

  Norway

  Solved!

  When you enable more "accurate" for sharpness (under the gear wheel), the value 0.1 works too!
  But w / just "use Legacy" checked (by default), there is not admissible.

  

• Possible bug? Change the geometry on the hair, the changes are lost when the model is saved, then loaded into fuse again.  Is this a bug?

  When I save the changes to the hair using the tool change the geometry in a file .fuse on the computer.  These changes are lost when I load the model to the fuse.  Is this a bug?

  Saved to disk:

  

  Reloaded in fuse:

  

  Post edited by: Allan Chaney I've included screenshots.

  Thank you much for the details.  I tested it on Windows and Mac and reproduced.  Doesn't seem to be a bug (but not a guarantee).  I've done some characters, recorded their soft-mod-ness very well.  I connected with the engineers for more tests and we will have fixed as soon as possible!

• confirmed a subelement bug in 2015.1

  First, watch this short video showing the issue, I did.

  Infuriating bug of first pro 2015.1 - YouTube

  How to recreate this bug-

  1. import a video clip.  Format is not serious.

  2. some subitems video imported.

  3 when subitems, uncheck the 'restrict the toppings for subclip limits. "

  grid mode, the poster frames a subitem must unfortunately be square black.  mousing over them will make the system displays a poster frame and hover work of scrub.  However, by clicking on a different subcomponent, or even do some work in the Panel Assembly causes the poster frame back to black.

  big bug.  the application makes it unusable if you have a project with a ton of subitems.

  I would say that sub-elements are detailed in this release.  the key to this bug and its annoying workaround is in the box 'restrict the toppings for the subclip of the limits.  Unchecking it causing the problem, it makes thumbnails behave in the tray as it should.

  Unfortunately, this means I have to manually, right-click on each subelement and choose ""MIC for subclip limits to restrict "if I want to see all thumbnails." 

  You can read more about this bug on facebook 'Moving to Premiere Pro' group here - https://www.facebook.com/groups/premierepro/?fref=nf

  my gear - windows 10-32 GB of ram, 6 core haswell-e, with Titan X GPU. The previous version of first doesn't have this bug.

  also, someone on the facebook thread confirmed this bug on the mac with 2015.1, both in windows 7, so it is most certainly cross-platform.

  In the context menu, uncheck vignettes show the applied effects.

• Share preset is possible LR CC 2015 to LR mobile (iPad)

  Hello world.

  Preset sharing is possible?

  LR CC 2015 to LR mobile (iPad)

  Hi yos0430,

  Greetings.

  According to me, it is not possible to share with mobile LR LR preset parameters.

  However, you can do editing of your images using Lightroom presets and then synchronize them with mobile LR.

  Concerning

  Rohit

• Bug in 2015 using two monitors and 6 K resolution Footage update

  After the update CC PP 2015 Ive notice a bug when I pull and extend a clip in my scenario, my second film LED 27 "monitor monitor which mirrors my monitor of the program just starts blinking and does not show the images rubbing as he used to. I extend the clip it does not reflect the correct position of the clip, it sparkles so that it shows my home desktop screen on occasion. Has anyone else been done to meet this bug. Its quite frustrating. This happens only when I have a second monitor hooked up. I've updated to version 9.0.2 they come out today. and I got the version 9.0.1 installed just F.Y.I before And I always feel the same questions. I am attaching a video and photo, so you can see the problem that is happening. After having tested far this only happens with images of 6 K resolution. It does not with a resolution of 4K and below. And again once this has happened after the update 2015 The photos of the show when I make drag and extend a clip in the program Monitor flashes and does not play the preview as it should, you can also see the timecode overlay is not correctly aligned either.  Password for the video: CCPP and I use a MacPro 2013 with 64 g ram duel D700 graphics cards and I'm editing a disc SSD of Raid Thunderbolt 2.

  
  

  I talked with Adobe tech support representative and he had no solution for me. Adobe can you please offer assistance more. Everything was good in Premiere Pro 2014 so it's probably a bug in update 2015 or conflict.

  
  

  

  Hi Azzie,

  After the update CC PP 2015 Ive notice a bug when I pull and extend a clip in my scenario, my second film LED 27 "monitor monitor which mirrors my monitor of the program just starts blinking and does not show the images rubbing as he used to. I extend the clip it does not reflect the correct position of the clip, it sparkles so that it shows my home desktop screen on occasion. Has anyone else been done to meet this bug. Its quite frustrating. This happens only when I have a second monitor hooked up. I've updated to version 9.0.2 they come out today. and I got the version 9.0.1 installed just F.Y.I before and I always feel the same question >

  I see that we have a solution for you on another thread. Locking this since it is a copy of the other thread.

  Thank you

  Kevin