Re: SA80 cannot find DVD - RAM drive

Similar Questions

• P20: cannot use the DVD - RAM drive after installing a trial software

  Hi members,

  I am using Toshiba satellite P20 - 604 model - load with windows xp prof - SP2. I wasn't able to use the software from burning DVDs successfully, so I tried to install cyberlink Power2Go software (trial ver) in there and ended up with "No. DVD RAM DRIVE APPEAR" in my computer. I could see the device dvd - ram with a yellow exclamation point in Device Manager. (the drive model is MAST * A DVD-RAM UJ-811). I tried to update the driver for it, no use. No idea how to recover the original driver and make it available for use dvd - ram drive? waiting for your valuable solution.

  Thank you & best regards

  M.Kanagaraj

  Hello

  The easiest way is to use the system restore option if you have created a restore point before you have had an experience with the trial version of Power2Go. If this is not the case, check if there is a system restore point has done in recent days.

  Good bye

• Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

  I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

  Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

  Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
  DVD player is Mat * a DVD - RAM UJ - 841 s

  Any suggestions?

  Hello

  On the Toshiba driver page, you can find the DLA for Tecra m7.
  Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

  Maybe it'll market

  But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
  This is why an additional driver should not be necessary!

  An additional proposal;
  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  After restarting again the OS should reinstall the drive and renew the software.

  Another tip:
  -Launch the registry
  -Choose the registry key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
  -Reboot the laptop

• DVD - RAM drive does not recognize blank CD

  When I check the properties of the DVD-RAM drive before inserting a CD, to the title of the record, I find the check box turn on CD on this drive already ticked. After that I insert a blank CD in the drive, DVD - RAM turns to CD. When I double-click on the CD icon, a warning message appears "D:\is is not accessible. Incorrect function ". When I opened the properties with the blank CD in the drive, I see that the box enable CD recording was erased. Not to mention that the screens of CD Free properties 0, use 0. If I once again re-checkmark the box above then CD resumes its normal operation with Windows built-in CD burning software, but continues to display an incorrect number of bytes in the areas of free / used. I installed on my Roxio Drag-to-Dsc computer. Let me emphasize that my DVD player had performed flawlessly with Roxio installed from the beginning. This problem came only recently. Is it possible to disable Roxio without uninstalling the computer?

  Hi Richard,

  You can check if the following is useful.

  Method 1: Run the next Fixit tool to check the issue.

  Your CD or DVD drive cannot read or write media

  Method 2:

  Step 1: Uninstall and reinstall the Device Manager DVD player. Automatically search for updates to the firmware on the manufacturer's Web site.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Step 2: Log on to the DVD drive manufacturer's website and install the latest updates from driver\firmware.

  I don't think that there is a way to just disable Roxio. For more help, you can contact Roxio support.

• E300 satellite - DVD Ram drive does not work with Win 8

  Hello

  I get an error message on my dvd - ram drive - Mat * un UJ8A0AS DVD-RAM

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I tried the solution of Microsoft Web site for this problem, but it did not work.

  Is someone able to recommend a fix for this problem. Tried to uninstall and reinstall the device without result.

  Have you tried to remove the device from Device Manager and reboot the laptop?
  After reboot of the device will be recognized and installed again.
  Please, do it and see if the problem still occurs.

• Satellite Pro A120 PSAC1E: Cannot burn DVD-RAM

  Hello

  I have a Satellite Pro A120 PSAC1E, who owns a DVD player, I tried to write on a DVD RAM, and he says the copy is write protected, I checked help and it says to install the driver of DVD from tools and disk utilities, but I can't find the drive with the rest of the bits provided with the computer when I got it earlier.

  Is there anywhere I can download this driver?
  Thank you

  Hello
  One question; What operating system do you use? Looking for XP or Vista drivers?
  The Toshiba driver page provides all the necessary drivers. There is a new update 5.20 - B70A DLA . CA? OS independent and Ca s? s a good idea to install it.
  This is the problem for writing or formatting DVD-RAM disk.

  PS; The DVD-RAM driver is also available but only for W2k
  The XP and W2k DVD-RAM driver is available by satellite Pro A120 PSAC0E

• Satellite P30 - Dvd ram drive not working properly

  Help, please...

  I tried to install 2 pieces of software on a new satellite p30, and resembles a need for new drivers for the dvd player, which is a carpet * a dvd - ram uj-830 s.

  Basically, I installed some bog standard games, they fit very well and while respect it works perfectly fine until I have try to load the game itself, and with one, it brings up the message 'Please eject and re-enter cd-rom.

  Can someone please point me to the right direction because everything I tried so far has failed, have installed the drivers from ram dvd that came with the laptop, but nothing helps.

  Post edited by: frazz

  Hello

  It will be interesting to know if this happens with all data media you use.

  In my opinion you must first locate the source of this problem. Check if your DVD - RAM drive works correctly using different CD, DVD and DVD - RAM of course. If Yes, in this case it is a problem specific, based on the game CD.

• Satellite P30 - DVD-RAM drive will not write DVD

  I have a Satellite P30 - 145 running XP Home Edition with a carpet * a reader of DVD-RAM UJ - 831S. I am able to read and write CDs and read DVDs, but am unable to write DVD. In 'My Computer', the drive is marked as a DVD - RAM drive, but if I insert a DVD r or DVD R, the label changes to CD drive, and I am not able to format the drive, I just inserted.
  Clues as to what is happening and what I can do about it?

  Hello

  Since when is this problem here? Is your unit pre-installed with your own operating system or with the recovery image? DVD - RAM Driver Software V3.1.0.0 is also pre-installed correctly? Burning application you are using?

  Try to remove the drive from Device Manager, reboot the device and check if the drive is recognized correctly again. As far as I know that your device comes with fixed burner DVD Super Multi (Double Layer) and you should be able to create all formats.

  What is DVD format?

• Error message from device IO on the DVD ram drive

  Help someone!
  I have a Satellite S203 and recently the em * a DVD ram drive stopped recognize any kind of CD/DVD, etc.. It must much worse & worse over time with her works do not at all. I tried to change the configuration of the IDE to PIO but always without success. Help, please...

  Jelibabi

  Hello

  Sorry, but I don t know what laptop you have (xxx-S203) but I can tell you that DMA if available is standard setting for all Toshiba laptops. On this path, it is not easy to give you a correct answer, but if the reader can't read original CD or DVD I guess there is hardware malfunction and the drive needs to be replaced.

  Good bye

• DVD - RAM drive means that I can burn DVDs & CDs on the Qosmio series F

  Can someone tell me that if I see "DVD - RAM Drive" under my computer does it means that my laptop allows you to record CD and DVD?

  I don't know which series Qosmio F you have exactly, but this means that you can burn CD - R, CD - RW, DVD-R, DVD - RW and DVD-RAM media empty. It must also be possible to use DVD + R and DVD + RW media. I didn t try this because I prefer DVD-R virgins.

  Just for example: my friend has a Qosmio F20-159 and according to the specification of the drive can write monitoring media
  CD - R 24 x
  CD - RW 4 x
  HS CD - RW 10 x
  US CD - RW 10 x
  US + CD - RW-
  DVD - R 8 x
  DVD - RW 4 x
  DVD + R 8 x
  DVD + R (Double Layer) 2.4 x
  DVD + RW 4 x
  DVD - RAM 5 x

  Good bye

• DVD - RAM Driver Software Uninstall Fails__

  Upgrade Windows 7 Home Premium install because I can't uninstall the DVD-RAM driver a software

  Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

  HTH,

  JW

• I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?

  I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?

  You try to install through the Explorer windows, not good... Try to install

  XP CD, reboot the pc. At this point, the value of the BIOS pc boot xp cd (cdrom), defined as 1

  boot device, set the hd as the second, boot to a cd. On the menu of the xp cd, select "Install xp", remove

  the partition, create one, let xp format & install auto. It is a clean installation, also, once she

  housing starts, do not touch any keys or mouce until xp asks for the product key #...

  You can read about it here. http://TechNet.Microsoft.com/en-us/library/bb457062.aspx

• Epson Event Manager cannot find the scanner driver. Epson said that the event handler is a windows thing, and so is the problem.

  I installed an Epson Stylus SX215. I can print, scan and copy if I use another way, but if I want to use the event handler it says that it cannot find the scanner driver may not use the event handler at all (cannot yet open the program).
  In addition, the scan option "attached to electronic mail" does nothing either. Don't know if this is because the event handler program or because he can not see e-mail programs I have.

  Hi bdelrio,

  Thanks for posting. Try running a System File Checker to find errors.

  Click Start.
  In the search box type cmd
  In the menu start right click on cmd.exe and select Run - As-Administrator.
  In the command prompt, type "sfc/scannow".
  Allow this to fill and run. Please let us know if this corrects and error, or if it reports errors, it cannot fix.

  Thank you! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• LG DVD-RAM drive read only not the disks in Windows 7

  Title pretty much sums up it...

  I installed 7 and it works great!  But if I didn't put in the drive to load on the system is not turn it up.  I can see the drive in my computer, but he still thinks that the CD1 of World of Warcraft's inside, but it doesn't have either turn this disc.

  I got a bunch of things off when installing (HyperTransport, IDE, floppy drive), should I turn all distributed and try to load it up, just to reactivate all later?  Or is there a known solution?  Exact model is the GH22NS30. AMD Athlon 64 x 2 processor Dual Core 5400 + Black Edition; Abit AN52 nForce 520 motherboard; OCZ SLI-Ready Edition 4 GB DDR2 (PC2 6400); Western Digital WD360GD 36 GB Raptor; Raptor 74 GB Western Digital WD740ADFD; LG GH22NS30 DVD - RAM drive. XfX GeForce 8800GT Alpha Dog Edition

  Hi Rustedbucket,

  Thanks for posting on the community forum is ready for Windows 7.

  Try to remove the filters from the registry, see if that helps with this problem.

  Be sure to back up the registry on external media before editing the registry.

  1. Click Start
     Collapse this includes this image

     

     type regedit in the Search box, and then click regedit in the programs list.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  3. In the pane, click UpperFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the UpperFilters registry entry.
  5. In the pane, click LowerFilters, and then click Remove.
  6. Click Yes to confirm the deletion of the LowerFilters registry entry.
  7. Exit the registry editor and restart the computer.

  Please let us know if that helps you or additional assistance is needed on this issue.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.