possible menuBar with workflow based ADF menus?

Similar Questions

• Creating or moving mailbox Exchange with Workflow

  Hello

  We use ActiveRoles Version 7.

  We want to automate the creation of the user with workflows, but I have problems with the creation of mailboxes.

  We want to minimize the rules we use, so my Test approach is about politics and after that, the settings are applied to the new user based on the ORGANIZATIONAL unit where the user is created.

  With the creation of mailboxes, I tried the following:
  1 workflow sets the mailnickname and the homeMDB; attributes in an edsaCreateMsEchangeMailbox later stage--> does only not with the Message error "external e-mail address is missing.

  2 created a strategy by default with the automatic creation of the mailbox in the selected store, the Workflow sets edsahomeMDB and edsaMoveMailbox 'True'--> error edsahomeMDB is missing

  3 created a strategy by default with the automatic creation of the mailbox in the selected store the Workflow defines extensionAttribute8 with the DN of the correctStore; "a second Workflow runs a script that reads the DN of the user, the extensionAttribute8 and the mailNickname and begins" Set-QADUser $user-Proxy - ObjectAttributes @{'edsaMoveMailbox' = $true; ' edsaHomeMDB "= $strEDSAhomeMDB}"--> error Access Denied.

  When I start a powershell with the user of our Service of server included in the command ' Set-QADUser $user-Proxy - ObjectAttributes @{"edsaMoveMailbox" = $true; "edsaHomeMDB"= $strEDSAhomeMDB}"works very well.

  Is someone has a solution or concept for this?

  Is it possible to remove a moverequest of Exchange when it is finished?

  Kind regards

  Florian Ballango

  Hello

  I found the solution, with Aidar and jhonnyquest.

  I customized the Web interface "Create User" Wizard with the extensionAttribute6 menu drop-down with the 'Yes' and 'no '. I use this attribute to control the creation of mailboxes with the Script

  Create a new Powershell Script in ActiveRoles with the following content:

  
  $Request.PutEx($Constants.ADS_PROPERTY_UPDATE, "homeMDB", $edsaHomeMDB)
  $Request.PutEx($Constants.ADS_PROPERTY_UPDATE, "edsaHomeMDB", $edsaHomeMDB)
  $Request.PutEx($Constants.ADS_PROPERTY_UPDATE, "edsaCreateMsExchMailbox", $null)
             
  }
  }
  }
  

  Create a workflow with the target "User" object, and then select the Action 'create '.
  In the empty workflow, you have the point of departure/green arrow and text with gray background the "execution of the operation: create the user.

  Add the previous cretated Script between the green arrow and the execution of the operation.

• Problem with flash based Web pages and re - install windows

  Hello!
  I bought the Toshiba NB100 and use the netbook for a few weeks. At first, it worked all fine and exceeded my expectation.
  However, since one some time he experiences trouble with performance based on flash Web pages such as youtube and etc, which makes it not not possible to stream any video smoothly. Basically, it's a fast-paced photo slideshow :(
  The problem here is certainly not the performance mode, which is set at the maximum.
  I tried to get through this problem with re - install the operating system, which is windows XP, but after transfer of the content produced the DVD on a flash drive recovery, the system does not have a configuration menu. It gives me an error report instead.
  * I put the following qustions you: *.
  * 1. What can be the reason for slow running applications? *
  * 2. I'm doing something wrong when you reinstall windows? * Ts here a simple manual for the resettlement of the op?
  Comments, suggestions and advice will be much appreciated and I thank you in advance.

  So you have installed a generic version of Windows XP?

  You may have forgotten to install the drivers graphics and other critical drivers such as the Intel Chipset driver.

  You see problems in Device Manager?

• RVS4000, port forwarding - with - IP-based ACL

  G ' Day!

  I want to know if it is possible to enable port forwarding and paste an IP based ACL on the attacker.

  Scenario:

  I replaced my gateway linux with a RVS4000 and reinstalled my linux machine as a file server with sshd running (now residing on my network behind the RVS4000).

  I have forwarded port 22 on the RVS4000 on my linux server - it works as expected. Now I want to restrict which IP addresses which may connect to port 22, that I can't go to work.

  After I forward port 22 to the linux server I can't control it with IP based ACL. Even if I deny all traffic to port 22, it will leave borrowing at the server linux as long as the port is active.

  I am doing something wrong or if this isn't just intended to work the way I want?

  acl based port will not work with the port forwarding on the device. Once you transfer the port are all allowede to enter this port. the acl will not take effect. I think that what you want to do the port binding is not a feature of this device.

• How to return external application form to a page with workflows

  I use Jdeveloper with ADF technology 11.1.2.3.

  I have Unbounded in the workflow that contains the login.jspx and payTaskFlow page which is defined workflow.

  After login.jspx should go to payTaskFlow. PayTaskFlow I mainPay.jspx this page will be called flows of external application.

  It is: after the execution of external application flow how are we going to a page with in payTaskFlow. Using a configuration file that I can specify the URL of the page and the page is coming without any problem in that the page does not come with workflows. I mean it's isolated I can't navigate form this page to other pages with workflows.

  Yes, the external application how do refers to the page with streams of tasks not directly using URL.

  
  

  
  

  
  

  Problem solved.

  My goal was to access a bounded task flows using URL. This can be done by typing the URL in a spatial way to mention the flow of tasks and its xml file id. It's average is discussed in this thread: https://community.oracle.com/message/4354496#4354496

  As Timo said the stubborn workflow always begin activity by default. So, if we want to go to a specific page with streams of work then we should add a router and set it as the default activity; According to some setting the router will decide if we go the normal flow or to the specific page you want in the stubborn workflow.

• How to get the userId value in the workflow of adf

  Hello
  
  I've created a workflow of adf and deployed the same into the application as a library of adf.
  
  Now, I need to get the registered in the value of the ID of the user in the workflow of adf I created.
  
  Based on this user ID needed to run the query to retrieve the data related to the user from the database.
  
  Please help/guide me to solve this problem.

  3 ways to recover the username (not sure what you mean by user ID):
  http://mahmoudoracle.blogspot.be/2012/06/ADF-get-current-logged-user-name.html#.USI_c-h8zIo

  Also provide your JDev version.

  Basically, you need to use the groovy expression in a view criteria (it's the way the faster and easier) and call that view criteria whenever you have need.
  That's if you use ADF BC of course.

• status of the database api (PL/SQL) based adf BC?

  Hello
  
  does anyone know the status of the API database (PL/SQL) based project ADF BC?
  (mentioned here: https://groups.google.com/forum/?fromgroups#! msg/adf-methodology/TiP2JXQm_Ag/zNbD7Kyf6hUJ)
  
  The following link does not work:
  https://database-API-based-ADF-BC.SampleCode.Oracle.com/
  
  It is also not included in the sample code oracle: http://www.oracle.com/technetwork/indexes/samplecode/jdeveloper-adf-sample-522118.html
  
  concerning
  Peter

  Hello

  The following link does not work:
  https://database-API-based-ADF-BC.SampleCode.Oracle.com/

  Avrom and EMG moved the project to a server that no longer exists. I had the code example of Avrom (at least a copy) and intend to work with Chris Muir to again make it a project of the EMG. Due to my time constraints used to be until the end of the year.

  The code that you can download on the blog of Avrom however works fine.

  Frank

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• Is it possible to use workflows to Train for the old masters in detail for CRUD operations

  Hello

  I use Jdev 11.1.2.3

  I have a use case of the implementation of paintings by master detail (a master and 3 Details) and I want the CRUD operation will end only when all the data are introduced. It is therefore possible to use workflows to train for this use case.

  Thank you

  The pb is solved, I just replace the Taskflow newPersonalDetail by a simple point of view and for the createInsert I am using invokeAction in the pageDef:

  Thank you

• Crash: Spin count exceeded (domain0) - possible deadlock with JEPP 2

  Hi all. It's my first post on the community forum. I ran into the runing today GROUP ESXi 5.0.0 - 702118 x86_64 build.

  

  I tried ESXi 4.1.0 build 348481 before x86_64 and meet? similar? and ran into the deadlock: "spin count exceeded (coalesceLock) - possible deadlock with JEPP 1.

  I have a heart and gathered the information form vSphere accourding to the KB provided by vmware. I am running the trial version and not for business. I found that in order to present an accident or any technological support ticket I need to have a contract. I was planing to allow evaluation expire and go back to the limited version of vmware, which offered free. I don't like and I would like to submit a crash.

  A I understand that I will not be able to present an I don't have a support contract? Noises, because from the point of view of vmware, it's almost a "free trial."

  Could this be a hardware problem after all? It seems that I get a different number of JEPP fails every time. Yes, I'm running a material in the white list. Looking for advice.

  Thanks to you all!

  Therefore, it is resolved are is it still happening

• I was handed this software this morning which is installed at the end of the day and I have never delt with cloud based adobe installation, I created the package this morning and have it installed on a machine but I'm not sure how to enable it

  I was handed this software this morning which is installed at the end of the day and I have never delt with cloud based adobe installation, I created the package this morning and have it installed on a machine but I'm not sure how to enable it

  Creative cloud learn & support

  http://helpx.Adobe.com/creative-cloud.html

  Cloud creation help / install, update or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• Convert Word doc with the drop-down menus in PDF w/menus

  I have a Word document with several drop-down menus. This document requires conversion to PDF and keep all the drop down menus. I have Acrobat X standard and you need to know how to convert the Word document.

  Of course, you can convert the Word file PDF but the drop downs should be recreated using form tools in Acrobat. You can use the drop-down list form field to re-create the menus.

• Workflow refractoring ADF with Jdeveloper

  Hello

  I can't find the option to stream refractor ADF task in jdeveloper. Never is this feature removed or is not available?

  I use jdeveloper: Build JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493

  Thank you

  Vautrin

  dvohra21 Sorry, but I don't see the connection. You point to a doc for a different version of jdev!

  1001912 you refactor? You can rename or move a workflow using the Refactor menu in the menu or you can convert the taskflow (getting started with ADF task flows - 11 g Release 1 (11.1.1.7.0))

  Timo

• Is this possible? Subforms appeal based on the drop-down list associated with the database

  I'm hoping to make a dynamic shape and I wonder if it's possible.

  I have a database with about 300 entries - pieces of agricultural goods and a few little bits of info on each of these properties. I want to create a form where users can choose the piece there rather than the property in a drop-down list. Based on the property they select, another menu drop down to fill with the cultures associated with this property. Then based on the selection made in this drop-down list, a specific form will be brought upward.

  For example, a person selects property #102 in the drop-down list. In the database, property #102 is associated with wheat, barley and corn, so the next drop would be complete with these three cultures. The user selects the wheat in the drop-down list and the form of wheat would be called. 

  I hope I explained that well enough.

  Is this possible? And if it's possible, how complicated to do? Assuming that I already have the database and subforms, it would be a long process from weeks to the script, or it would be simple enough?

  Yes, this could be done, here is an example that should help: Drop dependent dropdown (specimen attached)

  On the basis of selection (change event of the second menu drop-down), you can show or hide a subform.

  -Wasil

• Edged with workflow used as router for other workflow

  Hello
  
  I work with jdeveloper 11.1.1.2.0 and adf faces.
  
  I have a stubborn workflow which should act as a router! It will be called from a URL with certain parameters and then according to the value of the
  parameters and additional information, it will forward the request to streams of different tasks containing views jspx.
  
  The workflow itself does contain not all views jspx purely delivering.
  
  When I try to implement this I get the following error:
  
  [< 28 April 2010 16:04:07 CEST > < error > < HTTP > < BEA-101020 > < [ServletContext@28396381[app:CallForm_application1 module: CallForm-RouteTaskViewController-context-path root: / CallForm-RouteTaskViewController-context-root spec-version: 2.5 version: V2.0]] Servlet failed with Exception
  java.lang.NullPointerException
  at org.apache.myfaces.trinidad.util.Service.getService(Service.java:82)
  at org.apache.myfaces.trinidadinternal.context.DialogServiceImpl._getDialogRenderKitService(DialogServiceImpl.java:455)
  at org.apache.myfaces.trinidadinternal.context.DialogServiceImpl.launchDialog(DialogServiceImpl.java:370)
  at org.apache.myfaces.trinidadinternal.context.DialogServiceImpl.queueLaunchEvent(DialogServiceImpl.java:270)
  at oracle.adfinternal.view.faces.context.DialogServiceImpl.queueLaunchEvent(DialogServiceImpl.java:130)
  Truncated. check the log file full stacktrace
  >
  
  
  I can make it work if I add a jspx view to the workflow and then based on a button action on the lines of sight to the other workflows.
  
  
  Any help is appreciated!
  Jan

  I was doing this misplacement. I'm getting another error now. When I find something will let you.