¿Possible to place the paragraph "rule" under blank spaces?

Similar Questions

• Is it possible to adjust the paragraph after units of space increment?

  Hello everyone. I have a document with pictures inserted in the text stream. I use a style section for the image and one for the description of the image. Paragraph of the picture style has a thumb 0,1875 after the space. I want to set it down. It seems that the increments are fixed to 0,0625 inch at a time (it goes 0 to 0,0625 then 0.125 then 0,1875 and so for) but visually, it actually only adjust when increment reached 0.125 (between the two, it has no visual effect). Is there a way to adjust the increment for she does 0,0625 inch at a time instead of 0.125? Basically, I'm adjusting the space between the image and the description of the image.

  You check the attributes for the image description subsection or paragraph image to align with the grid? You should check the description. It is likely to always be a certain amount of space between them because of the leading slug but add more room by using spacing of paragraphs should be gently affecting the spacing unless you align to grid is enabled.

• Is it possible to place the table and the text online?

  Hi all

  I have a table need to align with the numbered list. Is it possible in line of the table and text on a single line. EX: 6.12 and top of the 'text' must align horizontally.

  See the screenshot of the problem.

  Currently what I do, it is to place the table in separate frame and place it online using the option of the anchor.

  

  Thanks in advance.

  Kasi

  We could use the options for text blocks to position the first line.
  Fixed value set to 0.

  And a table style that would govern the distance before and after a table.
  If you wish, set both values to 0 .

  We could also do a minimum in the lead with the paragraph formatting to separate paragraph following with the next table.

  

  

  

  Best,
  Uwe

• Is it possible to place the effects of particles associated with the character or specific layers?

  I can get an effect of particle to work on a large, its beautiful and perfect.  However, I want it to appear behind the character's body.  I not want to jet pack escape.  No matter where I place the layer of particles under the layer of body, in the layer of body, everywhere where - it seems still more the whole character when I trigger it.  So instead of exhaust gas, it appears as a fire crotch, haha.  How can I move it back?

  Thank you!

  Here is my best shot. (Sometimes you must click on image to see the motion

  

  It is actually quite easy after I figured out, that I had to use After Effects. Which is no doubt the intention anyway.

  So I did two separate scenes in Ch - rabbit with just the dangle, then the particles. I exported the two scenes and brought in a unique model in Ae. Place the particles under the puppet and the parent particles to the puppet. Keyframe position and rotation for the puppet and the particles follow all along.

• Is it possible to calibrate the tool rule in centimeters?

  I need to show specific reports on the image, for example, this distance is it's to that. A measurement tool that works in pixels is quite heavy. Is it possible to re - calibrate the tool rule to measure in millimeters, centimeters, etc.. ? Pixels don't really do for me.  It seems like an obvious choice, but I can't understand how do.

  or click with the right button of the mouse on the rule.

• Is it possible to change the paragraph style (none)?

  Whenever I make a bulleted list or a numbered list, I get a syle of fonts that we don't use in our project.  I tried to change this style, but it is grayed out.  All other styles allow editing.  How can I change this default style (none)?  I did a search in the file help and on the forum but have not seen any results.  It's too simple or others are ok with this style.

  Thank you

  The choice is to apply other styles like I did, or simply to set your LI style, which is the way of pure HTML. The reason why I do that you cannot map the tag LI for printed documents. I have just started the list, select the style that I want and that's all. It is an extra step.

  What is behind this change is that people complained that the code should be clean and now it is the case, people are aware there is a down side.

  When no style is applied, as zero, the police will be what is defined by the browser. Try changing the default font in your browser for some obscure fonts and generates output. What you'll see is this obscure font. Now see the same output to another browser with a different default font.

  You may not modify any as Willam explained. None means that no style is applied so that applies the default value of the browser. You will see may not be in Arial, the next person may see as something else. Modify a CSS sets styles you include in this CSS. You apply the paragraph styles or you don't, as in no style is applied that in none.

  Clearer now?

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• HP Pavilion g6-1229so: is it possible to use the serial number under the laptop?

  So, this is my first post here. Without wasting much time, I will go straight into the problem. About 2-3 years ago, my friend got a copy of Windows 8 for its new pc. Then he came to me and told me that I should try / install. After installing I read the disk. guess what? Its only supposed to be used enemy 1 pc. What menas that I have (and a friend of mine) has a pop up saying activate windows. So my question is, can I use the code for windows 7 Home premium which is under the pc? or I have to buy a new windows license? (Yes, I had this 'problem' for 2-3 years)

  Hello:

  The product key for W7 on the bottom of your PC will not work to activate the W8.

  You'll need to reinstall W7 or purchase a license W8.

• Adobe Muse | Is it possible to place the Audio Widget player in the foreground? So that the song is not constantly reloading with a change of sides?

  Hey guys!

  I m sorry, my English sucks. I hope you understand what I m trying to say, and you can help me.

  I put the player on my new site Widget http://inoutservice.de and I would like that song continues, even if I change to another page.

  
  

  Is this possible? Can U help me?

  
  

  Sorry for the double post, I already asked this in the German forum, but I do not get a response and I hope to get some help here.
  

  Thank you and best regards!

  Thank you also to Google for ( help me with the translation of =)
  

  As the Page reloads, the url of the page will trigger again the audio from the beginning. You need to customize it.

  http://StackOverflow.com/questions/9555250/how-to-keep-audio-playing-while-navigating-THRO ugh-pages

  r-going-to-the-next-page http://StackOverflow.com/questions/18264284/continue-Playing-audio-from-web-page-even-AFTE

  Thank you

  Sanjit

• Place the SWF file under my current items?

  I am loading an external SWF in to my FLAs cats_mc clip. How can I make the imported SWF appear under current items in my cats_mc video?

  This line of code adds the method swapDepths() of the textfield class.  It must not be repeated:

  TextField.prototype.swapDepths = MovieClip.prototype.swapDepths;

  'gmb' bottom most object MovieClip = my_Dyn_Txt5

  "gmmb' bottom most object MovieClip = my_Dyn_Txt6

  AB1.onRelease = function() {}
  gmb_mc.loadMovie (www.abc.com/myswf1.swf"");
  gmbb_mc.loadMovie (www.abc.com/myswf2.swf"");
  my_Dyn_Txt5.swapDepths (gmb_mc);

  my_Dyn_Txt6.swapDepths (gmbb_mc);

  gotoAndStop (5);
  }

• [JS] [CS5] Possibility of change 'In the paragraph spacing limit' with a Script

  Hello

  at the moment I'm writing a simple script that formats text. For this layout, I need the vertical Justification "Justify" with a "paragraph spacing limit", but I can't find anything useful.

  Does anyone know how to set the limit to a specific value?

  Thanks in advance, Statixx

  Here is my Script not yet finished

  Edit: edited, script had some big errors

  inDesign #target

  myDocument var = app.activeDocument;

  mySelection var = myDocument.selection [0];

  var myParagraphLength = app.selection [0].paragraphs.length;

  var myParagraph = app.selection [0] .paragraphs;

  var myTest

  mySelection.visibleBounds = [0,0,30,90];

  mySelection.textFramePreferences.insetSpacing = [3,3,1.5,3];

  mySelection.textFramePreferences.verticalJustification = VerticalJustification.JUSTIFY_ALIGN;

  If (myParagraphLength == 3) {}

  var myParagraph = myPara0 [0] .silence;

  var .silence myParagraph = myPara1 [1];

  var .silence myParagraph = myPara2 [2];

  .pointSize myParagraph [0] = '13pt ';

  .leading myParagraph [0] = '13pt ';

  myParagraph [0]. fontStyle = "Bold";

  .pointSize myParagraph [1] = '10pt '.

  .leading myParagraph [1] = '10pt '.

  .leftIndent myParagraph [1] = "10";

  .pointSize myParagraph [2] = '10pt '.

  .leading myParagraph [2] = '10pt '.

  .fontStyle myParagraph [2] = 'bold ';

  .leftIndent myParagraph [2] = "10";

  }

  Hello

  It is a property of textFramePreferences

  mySelection.textFramePreferences.verticalThreshold = number (range 0 - 8640)

  Object reference ID says:

  "... The maximum amount of vertical space between two paragraphs. Note: Justification valid only when it is vertical is justified; the specified amount is applied in addition to the space before or after the values set for the paragraph... of space"

• Change the paragraph by Script Style

  Hello!

  I don't know if this is the right place for this question but since its related to scripting, I'll ask here.

  Is it possible to change the paragraph Styles InDesign with a Script?

  For example, I need set Format1 hyphenation to specific values properties without changing the other properties. For Format2, I need to change other properties such as the Glph scaling.

  Like I need to do this with a lot of files, I suppose that the best way to archive it could be a script.

  Is there someone who had an idea on how to do it?

  Thanks in advance

  Thomas

  You're right, this can be done very effectively with a (relatively) simple script. This is an excerpt from a longer script of mine which covers a changing choice of design of end minutes documents open at once:

  for (i=0; i
  For a list of all paragraph properties that you can change, look in the ESTK help or (in a more user-friendly way to read and search) in an online version of these same data: InDesign ExtendScript API (10.0).
  		   

• Order of nets of paragraph and the paragraph shading

  Hey everybody,

  I have a question about paragraph shading and paragraph nets. Or more precisely their order to another.

  Next problem:

  We use the paragraph Shading, rule of the paragraph above and rule in paragraph below in a single line.

  What we don't know: how is the order of these three elements? Sometimes two paragraph nets are above the paragraph shading. And sometimes, the paragraph rule below is under the paragraph shading (see below).

  Does anyone know how to change the order of these items?

  

  Red line: rule of the above paragraph

  Green line: rule in paragraph below

  See the following screen capture below where I stacked three paragraphs with different colors for shading of paragraph.

  As you can see, the paragraph shading can hide the rule below (or even the rule above, if the offset is not big enough) of the previous paragraph.

  

  Hope, that helps.

  Uwe

• Is it possible to place slide show triggers in a separate container?

  Hi all

  I am currently working on a product configurator website which will help our customers choose the variations in the product we offer.

  Since I'm not a coder and have some previous experience in Muse, I am leaning toward the Visual construction Configurator a bit like this tutorial here because it offers the image of overlay/switching for the various States with ease: tutorial Adobe Muse CC 7.0 | Build a Configurator - YouTube

  The problem we are facing now is the number of options that we have to run against the available screensize. The above method works very well for 3 options stacked one on the other, however, we are likely to run about 10 or so options. Therefore, I am wanting to know if it is possible to place the triggers within a group of tabs, or scrolable window so that the user can work systematically options while the image is always in sight.

  Here is a quick sketch with how, ideally, it would be structured:

  

  My question is, is it possible?

  Thank you!

  Evan

  It is possible, but not without extensive rework on the underlying formatting CSS and scripts. In fact, you might have more luck ignoring the Muse fully (beyond create the concept of base with a placeholder) and find a proper jQuery pre-made somewhere and integrate directly into Dreamweaver.

  Mylenium

• Place the text on the image linked... block!

  Hello world!

  Its possible to place the block of text to the image using java script.

  the text in text frame is the name of the linked picture. someone to help me if possible...?
  

  
  

  Thanks in advance.

  -yajiv
  

  
  

  
  

  Hi, I rewrite it.

  var app.activeDocument.rectangles = TGT;

  for (i = 0; i<>

  myCaption = app.activeDocument.textFrames.add ();

  myCaption.textFramePreferences.verticalJustification =

  VerticalJustification.BOTTOM_ALIGN

  tgt [i] .graphics = myCaption.contents [0].itemLink.name

  myCaption.paragraphs [0] .justification =

  Justification.CENTER_ALIGN;

  NSDB = tgt [i] .visibleBounds;

  myCaption.visibleBounds =

  [NSDB-6 [0] NSDB [1], NSDB [0] - 1, NSDB [3]];

  }

  How about it?

  Ten

• How far you can place the Satellite Orbi?

  I have a garage with an apartment above comments. It is located about 80 feet of my existing Comcast modem and router Apple in my 3500 SF home. I tried two extensions of Netgear with poor results. I want to be able to use a laptop computer, mobile devices and Amazon burning in an apartment.

  Orbi will work for this application?

  If so, is how far possible to place the satellite from the base?

  Will I need a second satellite for the House?

  Hello Markinportland

  Each unit can cover up to 2000 square feet this will vary based on your environment. Also later on when we sell different satellites, you can have up to 3 satellites with one base.

  DarrenM