Is it possible to adjust the paragraph after units of space increment?

Similar Questions

• ¿Possible to place the paragraph "rule" under blank spaces?

  Is it possible to place the paragraph "rule" under the blank spaces?

  FYI, I have write equations using tables and a horizontally split cell to hold the numerator (top) and the denominator (bottom). If the numberator has fewer characters than the denominator, the division (in my case, the "rule") bar is too narrow.  I would like to add spaces before and after the numberator to the rule to match with the denominator, giving the equation looks nice. Spaces before the text of numberator carry a rule, but not spaces AFTER the text of numberator - hard spaces, or em-spaces, nor space en dash, or any other I can find. (Using the line of background cells as the dividing line does not work for my project.)  Thanks in advance.

  You should be able to underline one space, but why not use a real rule below? You can set on the desired width of column to any withdrawal, regardless of the characters in the line.

• Is it possible to adjust the sound volume of Windows to more than 100%?

  Hello

  I have a very simple question:

  Is it possible to adjust the sound volume of Windows to more than 100%?

  I explain why I need to do this:
  I can watch DVD files or .avi with my computer and VLC, that allows to adjust the volume to 100%. Some DVDs have a very low sound. So if I set VLC to 200% volume and the system volume to 100%, I can watch movies in good sound conditions. Then, my computer speakers are strong enough for me watching a movie.

  However, I have a problem with VSD: I use VOD with Windows media player and that player does not allow me to adjust the sound to more than 100%. So I put the sound of Windows media player at 100%, the sound of Windows to 100%, but the sound is very low.

  Please don't tell me to buy speakers, mine are pretty strong, and I find it uncomfortable to plug the speakers.

  Please don't tell me to use a software that increase the volume of the file I want to watch VOD.

  Is there a way to increase the sound volume of Windows to more than 100%?

  Please don t tell me this, please don t tell me that. You want to hear other people's opinions or what?

  AFAIK all sound level settings in Windows are synchronized and if you change the sound level in the properties of the speaker at the same level will appear in the Windows for the Volume Mobility Center and the maximum level is 100%. No more than that.

  As you already wrote the sound level can be increased in combination with Windows and some players.

  Is there any other way to watch these videos, but using WMP?

• Is satellite A500-1DN - possible to adjust the fan speed?

  Is it possible to adjust the speed of the fan of this laptop? As I saw in PC Health monitor the fan speed is mainly of 0%, and sometimes it amounts to 70% (on idling) and quite large making noise.
  I wish to address is it permanently on.

  Is this possible?

  Hello

  > Is it possible to adjust the speed of the fan of this laptop? As I saw in PC Health monitor the fan speed is mainly of 0%, and sometimes it amounts to 70% (on idling) and make a big enough noise

  I agree with you, I also own a500-1dn and it makes big noise even while surfing Internet. This forum was suggested to update Bios to reduce the fan noise.

• Is it possible to adjust the brightness of my screen?

  Is it possible to adjust the brightness of my screen?  If so, how?

  If it's a desktop monitor, there should be buttons on the monitor to do this. I found this a useful tool, you can set a different brightness for the display of day and night. However, you can also just use it to quickly adjust the brightness at any time.
   
  f.Lux
  http://Stereopsis.com/flux/

• Is it possible to adjust the alpha of a button in Captivate 9 using JavaScript?

  I was wondering if anyone knows if it is possible to adjust the alpha of a button in Captivate 9. I was able to activate and deactivate the buttons using JavaScript, but were not able to change the alpha of a button.

  John

  var thisElement = document.getElementById ("your_btn" + "c")

  thisElement.style.opacity =. 5;

• Is it possible to adjust the opacity on the timeline (CC version)?

  Is it possible to adjust the opacity on the timeline? Before CC, the video track was a bar to the opacity, as how the audio track has a bar for the volume level. This completely out feature or is it possible to add it?

  Hi Elizabeth,.

  It is there, you must extend the clips and then take the cursor of the mouse on the clip. The color of the Strip is not white so not visible clearly as before it was yellow in color.

  

  Vinay

• Is it possible to adjust the transparency of a caption slide show of Muse area, while maintaining the text inside to 100%?

  Is it possible to adjust the transparency of a caption slide show of Muse area, while maintaining the text inside to 100%?

  Thank you!

  In fact, I was wrong. Cramp brain today. It can be adjusted individually by using the link to the fill tool

  

• Is it possible to adjust the kerning by default in preferences in Photoshop as you can in Illustrator and Indesign?

  Is it possible to adjust the kerning by default in preferences in Photoshop as you can in Illustrator and Indesign?

  You can save a character style that defines kerning, but you cannot change the default behavior of the PS.

  

• ? Flash CS4, it is possible to adjust the length of several timelines at the same time?

  Hello

  I'm using Flash CS4. Is it possible to adjust the length of several timelines at the same time? I do an animation of the leaves that fall from the tree. The only leaves 17 separate calendars on separate layers and each has its own guide layer.

  If I had the opportunity to select all the chronologies set and adjust all their respective time start and end at the same time even, compared to the other, but also separately, life would be so much easier!

  Of course I can do timeline timeline, no problem, but I can't adjust the length in addition to a scenario at a time. (no pun intended)

  Even when I select more than one timeline, the double arrow only adjusts the length of a timeline. Even each layer guide must be set separately. I understand the benefit of this, but, timing tests and make adjustments would be so much easier and go a lot faster if I could select and drag several lengths of timeline at the same time.

  Is it possible to do this?

  I am new to Flash, thank you for your patience with me!

  SabelV

  You are welcome.

• is there a possibility to rename the dashboard after you generate reports

  Hai,
  
  is there a possibility to rename the dashboard after you generate the reports in dashboards with them affecting reports.
  
  If possible, please explain in detail to deal with...
  
  Thanks in advance.

  Hello

  go to Catalog Manager right click on the name of dashboard and select Rename smart then give the new name

  It does not affect reports.
  sort of take your backup catalog file

  Concerning

  NGO

• Is it possible to adjust the CPU fan after replacing the CPU - Satellite L35 - S21?

  I have a Toshiba Satellite L35-S2161. It was initially equipped with a Celeron M 410. Last weekend, I replaced the Celeron with a Pentium Core Duo T2250. Everything works fine. Now, both the Celeron and Pentium seem to run a bit hot.

  The beach of temp for both are exactly the same. Honer time between Celcius 55 to 62 degrees Celsius.

  Is it possible to set the fan to maintain a temperature between 50 to 55 degrees? If so, how?

  Check this http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

  -It is uncertain whether the new processor is compatible to the system board. Integrated chipsets can take charge of their technical specifications a wide range of processors, but this does not mean that all types of CPU can be used in a mobile system for * integrated cooling systems are designed individually for each set of model in order to ensure the optimal functioning of the machine *. An incorrect CPU can cause the system to overheat and damage the internal system components.

  -In most cases, the BIOS does not work with the replaced CPU which causes a malfunction of the machine. The BIOS needs to be rewritten after each Exchange of a CPU that can only be done by an authorized Toshiba service partner.

• Possible bug: Lightroom 5.7 now adjusts the brightness after cloning as a white backdrop. Ideas?

  I just found this: work on a larger series of images, shot on a white background.

  It is a mobile facility so sometimes the backdrop covers the whole frame.

  So after I do my settings to my select I use the spot removal tool to clone in some parts of the background if necessary...

  So far so good. But Lightroom then auto adjusts the brightness and contrast of...

  No idea what's going on... Restart LR and the computer did not any changes.

  I'm on a Mac 10.10.3

  Pointers?

  Best,

  D.

  The beach of the adjusted values of highlights, shadows, whites, blacks, clarity (at least) all depend on image content so your cloning on a dark area left replaces the range of values of the image and changes as well as cursors.

  The difference is very accentuated between the cloned image and uncloned if clarity is equal to 0 and black to-100 with all the remains the same that the DNG downloaded, where all parameters are identical between the two images and the background being cloned to white is the only difference in the parameters and settings, so the Visual difference is how LR applied 5 toning of the sliders.

  

  The problem is that unwanted background on the left is darker than the subject so it's existence or not determines what means 'black '.  It cloning of 'Black' changes that she will fix the details of the subject and affects how the highlights, shadows, white, black and clarity sliders work.

  I think that toning using tone instead of these 5 sliders below curve contrast will not have this problem and I think that cropping away rather than cloning in the background, then using the 5 sliders will not the problem.

  The essential is that cloning apparently happens before you tone up in the pipeline of the image and how these 5 sliders work is designed so that you will see this difference and is not a bug.

  --

  For the reference of someone else reading this, here's the default settings has been made in the two DNG as downloaded before changing Black =-100 and clarity = 0 for the side-by-side, supra.

  

• Satellite L855 - 13 G - can't adjust the brightness after update Win8

  Hello

  After update of windows 8 and installed the latest AMD driver on the Toshiba site, I cannot adjust the brightness of the screen using the Fn F2 or F3.

  In this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69752&tstart=45
  He says that he has solved his problem but how?

  I installed the Package value added, but no change

  Thank you

  Franco said he has updated the graphics driver and it helped

• need to adjust the paper after each print

  I have that 7520 printer all in one for 2 months (new)

  After each impression I have to adjust the paper otherwise, I get the message: no paper

  Make sure your paper guides are tight against the edges of the paper, while paper is loaded in the tray.  There should be little nicks in the status bar to help you confirm that the guides are engaged in the correct position.

  Otherwise if you are referring to the feeder manual adjustment can be the best thing you can do.  AutoDocFeeders are normally not snap and often need to be messed with on many models of printer.  Sometimes a small building of habbit can solve a problem like this.  If this isn't the case, you can try to contact HP support since it is such a new printer.  However, unless you can prove there is a mechanical fault on the tray or feeder, it probably isn't something they can do.

  You don't have something with the message No paper well.  Same as if the guides are disabled the printer should recognize there's paper in a way or another.  Questions guide paper normally takes place at the inadequacy of the size rather than no paper error.