Post EBS12 sparc Solaris 10 installation steps.

Similar Questions

• Download EBS 11.5.10.2 for SPARC Solaris 64-bit

  Where can I download EBS 11.5.10.2 for SPARC Solaris 64-bit? I already looked in the delivery and sac.us.oracle but without success.

  Oracle EBS 11i is no longer available for download, and you will have the support of Oracle to send the media pack to connect a SR.

  Thank you

  Hussein

• activate my membership and paid for it as well, but the creative cloud app shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been

  I activated my subscription and paid for it as well, but the creative application cloud shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been activated?...

  Kindly Contact customer and details of payment verified. [Make sure that you are connected to the Web site with the valid Adobe ID under which the product is licensed].

  
  

  
  

• Installation step by step 12.2 RAC ASM on Oracle Enterprise Linux5 64-bit EBS

  Hi all

  Hope you are all very well...

  Could you please help me because I am looking for a document (installation step by step 12.2 RAC ASM on Oracle Enterprise Linux5 64-bit EBS)... as I already searched and found a lot of documents, but all are more detailed, and others are for the installation of single node...

  What I need is to set up 12.2 RAC ASM environment on two 2 knots... So, could you please help me.

  Your support will be much appreciated...

  Kind regards

  Mohammed

  Hi Mohammed,.

  1. Yes, you could. You can also see "Section 3: install the software from the Oracle 11 g 2 Cluster" (Doc ID 1453213.1)

  2 oracle eBusiness Suite Installation and upgrade to version 12 (12.2) Notes for Linux x 86-64 (Doc ID 1330701.1)

  For the installation of CRS, please visit http://www.oracle.com/pls/db112/portal.portal_db?selected=16&frame=#oracle_clusterware

  Thank you

  Hussein

• I can't install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns the message to the final installation steps "invalid serial number." I had copied and pasted directly from 'My Adobe'.  What should do?

  I can't install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns the message to the final installation steps "invalid serial number." I had copied and pasted directly from 'My Adobe'.  What should do?

  Hi hgratz,

  In view of the error "invalid serial number" for Acrobat 9, I suggest you to please visit the doc KB link mentioned below:

  Error "invalid serial number". Acrobat 9 | CS4

  Let me know if this helps.

  Kind regards

  Ana Maria

• Japanese fonts for reader on Sparc Solaris?

  I'm looking for Japanese fonts for player on Sparc Solaris.

  I understand that the reader 8.1.7 is the newer for Sparc.

  I searched the Adobe Web site, but only found packages of policies for later versions and with x 86 shared objects;

  I couldn't find any fonts pack which is an independent machine or for sparc.

  Any pointer would be greatly appreciated.

  Thanks for your help.

  Check in ftp://ftp.adobe.com/pub/adobe/reader/unix/8.x/8.1.1/misc/

• EBS12 installation on sparc solaris 10 fails

  Hello!

  Thanks to the precious help of Saddam Hussein, I could do that walk once but then I uninstalled it and installing costs again but I can't make it work, it keep fails with the same error:

  Note: I'm not recreate the area transit from scratch but Iam using the previous installation staging area, assuming that it is a static environment.

  
  Logfile located at /ebs/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_sunny/ApplyDatabase_10260217.log

  |      0% completed
  
  ------0% complete RC-50004: Fatal: error in ApplyDatabase:
  
  Creating control files is not
  
  Cannot run configuration database using RapidClone
  
  RW-50010: error:-script returned an error: 1
  RW-50004: Error Code when you run the external process.  Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  I want to install like oracle and choose oracle: dba as the database owner and applmgr:dba as the owner of apps.

  I made sure that the permissions on the directory oraInventory is 777, also on the var/tmp/.oracle. I checked all the steps of preinstallation document validity and they all pass.

  even if its control complaint file but I can start the database in the State of the mount, although it crashes if I try to open.

  my project settings are:

  default:3:::process.max-sem-nsems=(priv,256,deny);project.max-file-descriptor=(priv,65536,deny);project.max-sem-ids=(priv,100,deny);project.max-shm-ids=(priv,100,deny);project.max-shm-memory=(priv,4294967295,deny)

  group.dba:100:oracle kernel parameters:oracle:dba:process.max-sem-nsems=(priv,256,deny);project.max-file-descriptor=(priv,65536,deny);project.max-sem-ids=(priv,100,deny);project.max-shm-ids=(priv,100,deny);project.max-shm-memory=(priv,4294967295,deny)

  ulimit settings are:

  $ ulimit - a

  Time (seconds) unlimited

  leader (Blocks) unlimited

  Data (KBytes) unlimited

  Stack (KBytes) 65536

  coredump (Blocks) unlimited

  nofiles (descriptors) 65536

  Memory (KBytes) unlimited
  

  the Oracle group parameters are:
  UID = 301 (Oracle) gid = 1000 (dba) groups = 1000 (dba), 2000 (applmgr)

  Group applmgr settings are:
  UID = 401 (applmgr) gid = 2000 (applmgr) groups = 2000 (applmgr), 1000 (dba)

  I can start the database in Mount sense of the State of the control file exists

  SQL > startup mount

  ORACLE instance started.

  Total System Global Area 1069252608 bytes

  Bytes of size 2109352 fixed

  427823192 variable size bytes

  624951296 of database buffers bytes

  Redo buffers 14368768 bytes

  Mounted database.
  SQL > show the settings panel

  VALUE OF TYPE NAME
  ------------------------------------ ---------- ------------------------------
  control_file_record_keep_time integer 7
  control_files strings ebs/oracle/VIS/db/apps_st/data/cntrl01.dbf, ebs/oracle/VIS/db/apps_st/data/cntrl02.dbf, /ebs/oracle/VIS/db/apps_st/data/cntrl03.dbf

  SQL > alter database open

  ERROR on line 1:

  ORA-00600: internal error code, arguments: [2252], [2359], [322925629], [], [],.

  [], [], [], [], [], [], []

  $ lsnrctl status SCREWS

  LSNRCTL for Solaris: Version 11.1.0.7.0 - Production on October 26, 2000 11:45:27

  Copyright (c) 1991, 2008, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=sunny.localdomain) (PORT = 1521)))
  STATUS of the LISTENER
  ------------------------
  Alias of SCREWS
  For Solaris TNSLSNR version: Version 11.1.0.7.0 - Production
  Start date October 26, 2000 02:18:20
  Uptime 0 days 9 h 27 min 7 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /ebs/oracle/VIS/db/tech_st/11.1.0/network/admin/VIS_sunny/listener.ora file
  The listener log file /EBS/Oracle/vis/DB/tech_st/11.1.0/log/diag/tnslsnr/sunny/vis/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=sunny.localdomain) (PORT = 1521)))
  Summary of services...
  Service 'SCREW' has 2 occurrences.
  Instance of "SCREW", status UNKNOWN, has 1 operation for this service...
  Instance of "SCREW", State LOAN, has 1 operation for this service...
  Service 'VIS_XPT' has 1 instance (s).
  Instance of "SCREW", State LOAN, has 1 operation for this service...
  The command completed successfully
  $

  any help much appreciated.

  Have you reviewed (Doc ID 138701.1) referenced above? If so and it did not help so please connect a SR.

  Thank you

  Hussein

• EM12c, improvement of the system of two - Questions about the post-installation steps

  Hi DBA:
  I use two system of EM11.1 process and have updated the SGD. Immediately after the set SGD to level, I went three agents. The agents take on a cluster. I have completed the tasks of post-upgrade deferred Data Migration and the Migration of the accumulated data. Finally, I registered offshore on migration for these three agents and everything seems * fine. My question:
  
  I spent a second set of officers who support another cluster. Is it true that each migrated agent calls for a fresh run of deferred employment data Migration and Migration of the accumulated data?
  
  Thank you
  
  Laura Sallwasser

  Yes, as and when you put agents in batches of the accumulated data Migration task is triggered. To better understand this concept:

  in the approach to upgrade 2-System, you can choose to spend your Management Agents in phases. When a set of Management Agents are passed to the, they start to download data on their hosts and their targets in the improved management repository, while those who are not switched yet, continue to download data from their hosts and the former repository of management targets. Therefore, earlier versions of the Management Agents coexist with those upgraded when only some of them have passed, and in such circumstances, the data are transferred to the former repository of management as well as the other at some point. However, note that a Management Agent only represents a host at some point, so coexistence does not two Agents of management on the same host. It shows only an earlier version of the Management Agent followed by a crowd who cohabits with a upgraded Management Agent, followed by another host.

  When you swtich in the next series of Management Agents in the next phase, although they start to load data into the repository of improved management, the data downloaded to the old management repository before be toggled continue to exist in the repository of the old management.

• RCU version used in OBIEE 11.1.1.7.0 SPARC Solaris

  Dear gurus,

  I have download in edelivery.oracle:

  Applications Oracle Business Intelligence 11.1.1.7.1 Media Pack for Sun Solaris SPARC (64-bit):

  -Oracle Business Intelligence 11 g (11.1.1.7.0) for Sun Solaris SPARC (64-bit) (disc 1 of 3) (part 1 of 2)

  etc.

  I am not confusing which version then the OBIEE I downloaded for solaris, 11.1.1.7.0 or 11.1.1.7.1?

  What version of the UCR, we need to install?

  Oracle Business Intelligence Applications RCU (11.1.1.7.1) for Microsoft Windows x 86 (64 bit)

  or

  Oracle Fusion Middleware reference utility of creation of 11g (11.1.1.7.0) for Microsoft Windows x 64 (64-bit)

  Thank you

  Concerning

  JOE

  Oracle Business Intelligence Applications RCU (11.1.1.7.1) associated with BI Apps

  Oracle Fusion Middleware repository creation Utility 11 g (11.1.1.7.0) is related to the installation of the OBIEE software

  11.1.1.7.0 is OBIEE and 11.1.1.7.1 is BI Apps

• Hive on Solaris 10 installation problem

  I try to install hive 1.5.1 on a Sun T1000 (SPARC 64-bit) with Solaris 10. I installed 11g (11.1.0.6), applied the required fixes, created a database (with the recommended settings) and ran the hive Setup Wizard. Setup was correctly executed until the last step where the log file says: "an error has occurred all by creating models of user subscription»
  
  The logfile BeehiveConfigurationAssistant says:
  
  [INFO] [2009-07-02 21:47:47] [GlobalLib::Executor:executePlainCmdlineToolCmd line 403] [Execution ' /export/home/oracle/oracle/product/1.5.1.0.0/beehive_1/beehive/bin/beectl add_user_subscription_templates dir--export/home/oracle/oracle/product/1.5.1.0.0/beehive_1/beehive/seed/uss--rentrant--activate_configuration true - entity_format id - log_level FINE ' ""]
  [BEECTL] []
  [BEECTL] [beectl command failed. See the log file for more details.]
  [BEECTL] [An error occurred all by creating user subscription models. Check the logs for details].
  [BEECTL] []
  [BEECTL] [Error code: 02114 EPUE]
  [BEECTL] [Cause: see trace of the stack for more details.]
  [BEECTL] [Effect: Create subscription model did not finish.]
  [BEECTL] [Action: correct the error and try again.]
  
  The file beehive/logs/beectl/2009.07.02/beectl_add_user_subscription_templates...txt says:
  
  [2009-07 - 02T 21: 51:23.456 - 07:00] [hive] [TRACE] [] [commandline.framework.CLICommUtil] [host: - hostname_removed-] [nwaddr: - ip_removed-] [tid: 11] [username: oracle] [ecid: 10.5.195.251:82255:1246596482433:2, 0] ANSWER AFTER ORDER COMPLETED DISTANCE IS: 1. < type = "oracle.ocs.commandline.io.resultset.ComboResult resultset" > < type resultset = "orac".
  le.ocs.commandline.io.resultset.MultiLine' > < resultsetid ID = "1245765497316" / > < message = 'user info' button > beectl command failed. See log file for more details. < / message > < / resultset > < resultset type = "oracle.ocs.commandline.io.resultset.MultiLine" > < resultsetid ID = "1244861419716" / > < message = 'user info' button > an error occurred creating subscription user templates. See the log for more details. < / message > < message = 'user info' button > < / message > < message = 'user info' button > error Code: 02114 EPUE < / message > < message = 'user info' button > Cause: see stack trace for details. < / message > < message = 'user info' button > effect: create model subscription was not completed. < / message > < message = 'user info' button > Action: correct the error and try again. < / message > < message = 'user info' button > < / message > < message = 'user info' button > error Code: 02114 EPUE < / message > < message = 'user info' button > Cause: see stack trace for details. < / message > < my
  Sage key = "user info" > effect: create model subscription was not completed. < / message > < message = 'user info' button > Action: correct the error and try again. < / message > < / resultset > < / resultset >; [[oracle.ocs.commandline.BeeCtlException: an error occurred creating subscription user templates.]] See the log for more details. [[
  at oracle.ocs.commandline.commandimpl.uss.CreateSubscriptionTemplates.createSubscriptionTemplatesFromFile(CreateSubscriptionTemplates.java:214)
  ... < snip >...
  Caused by: oracle.csi.CsiException: Exception thrown
  CsiException:oracle.csi.CsiException: SQLException thrown
  CsiException:oracle.ocs.core.store.exceptions.sqlexception.OcsRetriableConnectionException: Closed: connection class: ExceptionMetadataFactory
  Error code: Error Code: [EPUE-02114, INFO, creation of subscription models has encountered an error.]
  Details: null
  Cause: See trace of the stack for more details.
  Effect: Create model subscription was not completed.
  Action: Correct the error and try again.
  Message: null
  Caused by: null
  The ID of the service instance: [eb772131 - 671c - 4 d 23 - 8a 06 - 13c128fc7883, eaf61089-0529-464e-b0a8-7fb765d587d6]
  The list of service instances: [instance_mgmtsvc_BEEMGMT_caldav. - hostname_removed-, instance_uss - service_BEEAPP_caldav. - hostname_removed-]
  Check the connection attributes: [BEE_LOGON_REC_CLIENT_LOCALE:;] BEE_LOGON_REC_ID:100; BEE_LOGON_REC_PRINCIPAL_NAME:SYSTEM; ]
  : Class: ExceptionMetadataFactory
  ...
  
  I just do a standard install using default templates. Any ideas what is wrong or other log files I can look at to see more information about the failure?

  Hello
  Have you tried just pressing "Retry"?
  You can see if you have Solaris Patch 127111-02 (or his replacement 127127-11) - should be available on SunSolve.

  Thank you
  Richard

  Published by: Richard Hall, July 7, 2009 13:37

• I followed the installation steps of time on behalf of my son, but it does not work

  I followed the steps required to set up the time limits for my son. However, it is still able to connect at any time even though I welcomed a total of 14 hours per week. Is there anyway someone cane help with this.

  Hello

  This problem can occur because of incorrect parental control settings.

  I suggest to return the item and check if the settings are correct or not.

  Control when children can use the computer
  http://Windows.Microsoft.com/en-in/Windows-Vista/control-when-children-can-use-the-computer

  See the articles for more information.

  What can I control with Parental controls?
  http://Windows.Microsoft.com/en-in/Windows-Vista/what-can-i-control-with-parental-controls

  Set up Parental controls activity reports
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-parental-controls-activity-reports

  Protect your kids with parental controls
  http://Windows.Microsoft.com/en-in/Windows-Vista/protecting-your-kids-with-family-safety

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Vista SP 2 hung up, Service Pack installation: step 1 of 3-0% complete

  Original title: Vista SP 2 hung up - what to do?

  Simply download the SP2 on Vista 32 bit and am hung up in "installation of the Service Pack: step 1 of 3-0% complete.".  Do not turn off your computer. "What is the solution?

  Hi bobmede,

  
  Method 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse, then check if the installation of the Service Pack 2 takes place.

  
  Method 2: you can follow the steps described in the article below that addresses the question

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  (The article applies to the KB 937287 update, steps applies to other updates)

• T320 Installer step by step - creating RAID 1 for the OS Installation.

  Dear all,

  First of all thank we just bought you who read this, a new Dell PowerEdge T320 our business (SMB) server with standard specifications.

  Processor Intel Xeon E5 - v2

  2 x 4 GB memory

  2 x 2 TB HDD (Hot Plug in)

  Dual power supply (495W each / Hot plug-in)

  Integrated PERC h310 RAID controller.

  Now the question is that I want to configure my new server with RAID 1 & to install Windows Server 2008 R2 on it. I did R & D of the Site Support Dell's and some other sites too, now more and more confused on where to start I did not even turn on the server

  Could someone please tell me installation guide step by step in order to configure my RAID 1 and then install the Windows Server 2008 R2 on it? As I have seen/wanted here on the pages of the community saw the same question asked by many but could not find the step by step guide.

  Thank you!

  P.S.: If I forgot to mention something about my request please let me know if I can give you the info (if any) remaining

• Error During Installation of 6.0 VCAC to #InstallRepoModel install model repository under IAAS component installation step

  Hi all

  I try to install the VCAC 6.0 and can spend the first 2 steps "Laying the device identity" and "ask the VCAC device." Able to communicate between IAAS machine with the device.

  The installer works fine until registration solution GOES but does not step '' Dynamicops loading Assembly '' giving the officer the error in the log file. It shows a complete HTML page that explains the 401.1 Unathourized,, error server in Application "DEFAULT WEB SITE/REPOSITORY.  I do the installation with the local administrator who has all rights on the machine. The machine is part of a domain, I also tried to install with the user admin from the field but the same error occurs. For more details, please see the log file. During the complete installation the installation program ask user/pwd twice.

  1: device VCAC user/pwd

  2: administrator user/pwd, where the IAAS need to installed components.

  Note: SQL server for the database is on the same computer on which I am trying to install IAAS components. The Windows Firewall is turned off completely.

  For installation I'm the Guide and also the following link. How to install vCloud Automation Center (vCAC) 6.0 - part 3 - IaaS components | Tech blog | Blog

  Please let me know if more information is needed to debug the problem.

  Concerning

  Pankaj

  Hi John,.

  I can remember my own problems with the installation of the iaas and had the same problem as you.

  You can find the solution in the details of the error provided (it took a long time, until what I found it myself)). It's a problem with NTLM authentication using the domain name COMPLETE for a local connection to the IIS application.

  Test method 1: http://support.microsoft.com/kb/896861/en-us

  As BackConnectionHostNames, you must use:

  host name

  FQDN

  and if you use DNS CNAME you, those too

  Example:

  vcaciaas

  vcaciass.domain.TLD

  aliasvcaciaas

  aliasvcaciaas.someotherdomain.TLD

  Hope this will help

  Greetz

• Solaris 10 installation problems

  Hello

  I am trying to install Solaris 10 in VMware Server 2, using the image of the DVD "sol-10-u6-ga1-x86-dvd.iso".  When I try to start the installation I get an error message saying "incompatible medium installed" and I can not get any other (screenshot attached).

  Someone else had a similar problem and managed to resolve it?

  Thank you!

  Select this option.

  I just ran into the same error.

  I found the solution here:

  VMware Server 2.0 Release Candidate 2 Release Notes

  It seems to be a lot of information still relevant in the beta and RC release notes which have been removed from the final product release notes.

  It is the second thing that I found it.

  The first thing is that the option to install to start/stop the virtual machines with Windows disable the fast user switching.