Post-formulaire relaxation - output options
I use form 10g.I have a block non-base of data in the form. Stored procedures (program units) are used in triggering the validation button to save any changes made to this block, to the database. Because, it is a block not db, the form does not identify the changed items. So when the user selects accidentally any other form in the menu, the form does not give warning to the user saying that "changes are not saved."
The form has two tabs. If the user leaves the form from the second tab (non db block based), I would like to issue a generic warning for the user, such as "you are about to leave the form XYZ. You will lose all unsaved changes. You wish to proceed? »
Is the trigger of the Form after the right place to do this check and raise the warning msg? I have the the following code in the form post trigger
DECLARE
canvas_id canvas;
current_tab VARCHAR2(30);
alert_id alert;
alert_button NUMBER;
BEGIN
canvas_id := FIND_CANVAS('XY_Canvas');
current_tab := GET_CANVAS_PROPERTY(canvas_id, topmost_tab_page);
IF current_tab = 'XY_TAB' THEN
alert_id := FIND_ALERT('ME_WARNING_A');
SET_ALERT_PROPERTY(
alert_id,
alert_message_text,
'You are about to leave the XYX form. You will lose any unsaved changes. Do you wish to proceed?'
);
alert_button := SHOW_ALERT(alert_id);
IF alert_button = alert_button1 THEN
NULL;
ELSE
COMMIT_FORM;
END IF;
END IF;
END;
The Commit_form is a restricted procedure cannot be used in the trigger of the form. What can I use, so that the control remains on the form? (It is not necessary to call stored procedures to save the changes to the database. The goal is to stop navigation to a different form or outside the current form)Thanks in advance.
Smita,
Sorry, but I gave you bad information. You cannot programmatically change the status of FORM or BLOCK variables. You can change the RECORD_STATUS, but this is only valid if you perform a check of the State of registration that you leave the specific record. For a verification of large form, it would be better to create a GLOBAL or a SETTING that you can configure and then check the status of this SETTING to out of shape or GLOBAL. Personally, I recommend the use of a PARAMETER to the GLOBAL variable. This requires a little configuration, but it's not too bad. Here are the steps that I got to do this:
1. create the Parameter object: PREV_VALUE, data type: CHAR
2. create the Parameter object: FORM_STATUS, data type: CHAR, default value: QUERY
3. create the Pre-Text-trigger on block with the following code:
BEGIN
COPY(NAME_IN('SYSTEM.TRIGGER_ITEM','PARAMETER.PREV_VALUE');
END;
4. create block-level when-validate-item trigger with the following code:
BEGIN
IF ( :PARAMETER.Prev_Value != NAME_IN('SYSTEM.CURSOR_VALUE') ) THEN
:PARAMETER.Form_Status := 'CHANGED';
END IF;
END;
Notes; If you have a trigger point level when validate point on any of the elements of this block, you need to change the default value of the property of the hierarchy of execution of two triggers; a 'before' and the other 'AFTER' so that both triggers will fire. If you do not, only the block-level trigger fires.
5. Finally, create a trigger button-output level/form with code Module:
BEGIN
IF ( :PARAMETER.FORM_STATUS != 'QUERY' ) THEN
--Prompt your user to save changes here.
--Call your program logic to perform the save.
END IF;
Exit_Form;
END;
Again, sorry for the wrong direction to my first answer.
Hope this helps,
Craig B-)
If someone useful or appropriate, please mark accordingly.
Published by: Silvere on 7 February 2012 09:44
Tags: Oracle Development
Similar Questions
-
How to edit scanned documents when the output options are PDF files
I have a printer of HP Photosmart Plus b209a-m. How I edited the documents I'm scanning when the 3 output options are to create PDF or Tiff files?
The button "scan" on the window of HP solutions says that you can "analyze and edit text with or without graph documents." Also, this website solutions indicates that I can edit documents that I scan. But the 3 output to 'scan' options to create a PDF file, to send a PDF file or to create a Tiff file. I think that all of these types of files are not editable. I was not able to find an option to create text or Word files.
Thanks for your help,
Jim
JSD says:
I have a printer of HP Photosmart Plus b209a-m. How I edited the documents I'm scanning when the 3 output options are to create PDF or Tiff files?
The button "scan" on the window of HP solutions says that you can "analyze and edit text with or without graph documents." Also, this website solutions indicates that I can edit documents that I scan. But the 3 output to 'scan' options to create a PDF file, to send a PDF file or to create a Tiff file. I think that all of these types of files are not editable. I was not able to find an option to create text or Word files.
Software that comes with the printer HP Photosmart Plus B209a there OCR package in it. However, we can always install it by simply following procedure below:
(1) perform a disk cleanup. (Start > all programs > Accessories > system tools > disk cleanup)
(2) open the link below and save it on desktop OCR software
FTP://ftp.HP.com/pub/Printers/ocragent/hpcom_OCR_140_003.exe
(3) run the file after the download is complete.
(4) if the error is displayed to indicate "this update does not support all of the HP device... ", do not close the message. It is very important.
(5) open file folder
(6) file open 7z
(7) find the folder "ocr_web_pack". Copy this folder on the desktop.
8) click OK in the error message
(9) open the "ocr_web_pack" file that is copied on the desktop and double-click "SETUP. "EXE" file
-
The device independent Postscript file will not let me choose the format of paper or output options
I am trying to output separated PDFs from InDesign (Mac OS 10.8) CS6. My only output options are a laser printer that can actually produce 2 pages on a single document or a device independent postscript file for which all output options are grayed out.
I used to do all of this from a previous version of InDesign using the plugin Adobe PDF as the PPD, with Acrobat Pro has been installed, but I have the latest version of Acrobat Pro, and that no longer works.
(If you know ' why the PDF previously separated: the driver to press the company that prints our book was never able to determine its RIP settings to save me from this nonsense without end.)
You can get the PPD 9 Adobe InDesign CS6 optionally print but not sure it will work on Mac 10.8, follow the below steps and then check: -.
- Quit InDesign.
Navigate to/Applications/Adobe Indesign CS5/Presets /.
- In the Presets', folder create a file called PPDs (the name of the file is case-sensitive).
Control-click on the following link and choose Save link under download the Acrobat 9 PPD:
Place a copy of the PPD downloaded into the folder created in step 3.
-
Photoshop CS5 (Windows) - Output Options - where are they?
Sorry to put this very basic question to the top, but I can't access the output from the print screen Options. I, of course, consulted with help from Adobe and it says that a pop-up window should appear and allow me to choose to display output options, but many times I opened the print screen I was unable to find it and none has ever shown pop-up window. I searched the forum and can not see all entries relavent.
One of you, the knowledgeable people help me please? Please, please, please.
Thank you in advance for any help you can give me.
Hi Jay,.
You can find the option to exit from here.
Click file > print
Choose Exit in the pop-up menu in the upper right.
You can also find the color management in the below output drop-down list. Hope you find.
Bobby Johnson.
-
How do I enter slice output options?
Notwithstanding the consesus that it is better to create pages in DW, I want to my PS doc sliced output as CSS rather than tables. Photoshop help gives the following: slice output options
You can set the following options in all of the slices:
Generate table aligns slices using a HTML table instead of a cascading style sheet. ... Generate CSS generates a style sheet cascading, rather than an HTML table.
How to access these options in PS CS3? I'm puzzled.
Save for web
-
Can't find a Post processor of post-processing application output service
Hi experts,
Users complaining that they could not able to generate the PDF file.
The claim of the user:
The program does not generate the PDF file. The program generates just the XML output. The log file indicates that 'Impossible to find a Post processor of post-processing output service application' 25852905
EBS: 12.1.2
OS: RHEL 5.5
DB: 11.1.0.7.0
Steps we tried:
1. increase the process of the OPP to 16
2. simultaneous increase: OPP Response Timeout to 750
3. There is no problem in the log manager.
4 concurrent requests fail because the output of post-processing (OPP) Timeout (Doc ID 352518.1()
5 restarted Ran CM. CMclean.
6
7.unable to View output pdf file created by the XML editor
But we find no solution to the foregoing.
Journal:
+-----------------------------
| Starting the competitor program...
+-----------------------------
Arguments
------------
p_order_by = "TRX_NUMBER".
p_trx_number_low = '8414037'
p_trx_number_high = '8414037'
p_open_invoice = 'n'
p_check_for_taxyn = 'n'
p_choice = 'SALT '.
p_header_pages = '1'
p_debug_flag = 'Y '.
p_message_level = '10'
------------
Obliging NLS_NUMERIC_CHARACTERS to: '.,' for the treatment of OPE
NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are:
American_America.US7ASCII
'.,'
Enter the password:
REP-0004: WARNING: could not open the file of user preferences.
MSG-00100: DEBUG: AfterPForm_Trigger +.
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SALT
MSG-00500: DEBUG: about to build the WHERE clause.
MSG-00500: DEBUG: built WHERE clause.
MSG-00100: DEBUG: choice differs from ADJ, definition ORDER BY.
MSG-00500: DEBUG: table 1: AR_ADJUSTMENTS COM_ADJ,.
AR_PAYMENT_SCHEDULES P,.
REC RA_CUST_TRX_LINE_GL_DIST,
RA_CUSTOMER_TRX, A.
B HZ_CUST_ACCOUNTS,
RA_TERMS T,
RA_TERMS_LINES TL,
TYPES OF RA_CUST_TRX_TYPES,
AR_LOOKUPS L_TYPES,
HZ_PARTIES LEFT,.
HZ_CUST_ACCT_SITES A_BILL,
HZ_PARTY_SITES PARTY_SITE,
HZ_LOCATIONS LOC,
HZ_CUST_SITE_USES U_BILL
MSG-00500: DEBUG: table 2: RA_TERMS_LINES TL,.
TYPES OF RA_CUST_TRX_TYPES,
AR_LOOKUPS L_TYPES,
B HZ_CUST_ACCOUNTS,
HZ_PARTIES LEFT,.
HZ_CUST_SITE_USES U_BILL,
HZ_CUST_ACCT_SITES A_BILL,
HZ_PARTY_SITES PARTY_SITE,
HZ_LOCATIONS LOC,
AR_ADJUSTMENTS COM_ADJ,
RA_CUSTOMER_TRX, A.
AR_PAYMENT_SCHEDULES P,.
RA_TERMS T
MSG-00500: DEBUG: where 1: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND REC CUSTOMER_TRX_ID = A.CUSTOMER_TRX_ID.
AND REC. LATEST_REC_FLAG = 'Y '.
AND REC. ACCOUNT_CLASS = "REC".
AND P.PAYMENT_SCHEDULE_ID + (P.CLASS DECODE,
'INV', 0,
'')
= COM_ADJ. PAYMENT_SCHEDULE_ID (+)
AND COM_ADJ. SUBSEQUENT_TRX_ID IS NULL
AND 'C' = COM_ADJ. ADJUSTMENT_TYPE (+)
AND A.COMPLETE_FLAG = 'Y '.
AND A.CUST_TRX_TYPE_ID = TYPES. CUST_TRX_TYPE_ID
AND L_TYPES. LOOKUP_TYPE = ' INV/CM/ADJ.
AND A.PRINTING_OPTION ('PRI', 'REP')
AND L_TYPES. LOOKUP_CODE =
DECODE (TYPES. TYPE "DEP", "INV" TYPES. TYPE OF)
AND NVL (P.TERMS_SEQUENCE_NUMBER, nvl (TL. SEQUENCE_NUM, 0)) = nvl (TL. SEQUENCE_NUM, NVL(p.terms_sequence_number,0))
AND DECODE (P.PAYMENT_SCHEDULE_ID, ", 0, NVL(T.PRINTING_LEAD_DAYS,0)) = 0
AND A.BILL_TO_SITE_USE_ID = U_BILL. SITE_USE_ID
AND U_BILL. CUST_ACCT_SITE_ID = A_BILL. CUST_ACCT_SITE_ID
AND A_BILL.party_site_id = party_site.party_site_id
AND B.PARTY_ID = OFF. PARTY_ID
AND loc.location_id = party_site.location_id
AND NVL (LOC. LANGUAGE, 'US') = 'EN '.
AND A.TERM_ID = TL. TERM_ID (+)
AND A.TERM_ID = T.TERM_ID (+)
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID (+)
MSG-00500: DEBUG: where 2: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND P.PAYMENT_SCHEDULE_ID + (P.CLASS DECODE,
'INV', 0,
'')
= COM_ADJ. PAYMENT_SCHEDULE_ID (+)
AND COM_ADJ. SUBSEQUENT_TRX_ID IS NULL
AND 'C' = COM_ADJ. ADJUSTMENT_TYPE (+)
AND A.COMPLETE_FLAG = 'Y '.
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID
AND A.CUST_TRX_TYPE_ID = TYPES. CUST_TRX_TYPE_ID
AND L_TYPES. LOOKUP_TYPE = ' INV/CM/ADJ.
AND A.PRINTING_OPTION ('PRI', 'REP')
AND L_TYPES. LOOKUP_CODE =
DECODE (TYPES. TYPE "DEP", "INV" TYPES. TYPE OF)
AND NVL(T.PRINTING_LEAD_DAYS,0) > 0
AND A.BILL_TO_SITE_USE_ID = U_BILL. SITE_USE_ID
AND U_BILL. CUST_ACCT_SITE_ID = A_BILL. CUST_ACCT_SITE_ID
AND A_BILL. PARTY_SITE_ID = PARTY_SITE. PARTY_SITE_ID
AND B.PARTY_ID = OFF. PARTY_ID
AND LOC. LOCATION_ID = PARTY_SITE. LOCATION_ID
AND NVL (LOC. LANGUAGE, 'US') = 'EN '.
AND NVL (P.TERMS_SEQUENCE_NUMBER, TL. SEQUENCE_NUM) = TL. SEQUENCE_NUM
AND T.TERM_ID = P.TERM_ID
AND TL. TERM_ID (+) = T.TERM_ID
MSG-00100: DEBUG: AfterPForm_Trigger -.
MSG-00100: DEBUG: BeforeReport_Trigger +.
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 26
MSG-00100: DEBUG: BeforeReport_Trigger -.
MSG-05000: DEBUG: Trx No.... 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00010: 12:03 1 Transaction: 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: Get_Country_Description.
MSG-05000: DEBUG: deliver to the address...
MSG-05000: DEBUG: tackle the Style:
MSG-05000: DEBUG: address 1: 11000 NORTH IH-35
MSG-05000: DEBUG: address 2:
MSG-05000: DEBUG: address 3:
MSG-05000: DEBUG: address 4:
MSG-05000: DEBUG: City: AUSTIN
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State: TX
MSG-05000: DEBUG: Province:
MSG-05000: DEBUG: Postal Code: 78753
MSG-05000: DEBUG: territory:
MSG-05000: DEBUG: Country_Code: U.S.
MSG-05000: DEBUG: client name:
MSG-05000: DEBUG: Bill:
MSG-05000: DEBUG: first name:
MSG-05000: DEBUG: family name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: country Code: U.S.
MSG-05000: DEBUG: country Desc:
MSG-05000: DEBUG: print flags home: N
MSG-05000: DEBUG: width: 40
MSG-05000: DEBUG: minimum height: 6
MSG-05000: DEBUG: Max height: 6
MSG-05000: DEBUG: back to formatted... 11000 NORTH IH - 35
AUSTIN, TEXAS 78753
MSG-05000: DEBUG: Bill to address...
MSG-05000: DEBUG: tackle the Style:
MSG-05000: DEBUG: address 1: 2481 ROSS CRES.
MSG-05000: DEBUG: address 2:
MSG-05000: DEBUG: address 3:
MSG-05000: DEBUG: address 4:
MSG-05000: DEBUG: City: NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province: SASKATCHEWAN
MSG-05000: DEBUG: Postal Code: S9A3R3
MSG-05000: DEBUG: territory:
MSG-05000: DEBUG: Country_Code: CA
MSG-05000: DEBUG: client name: VAUGHN FAUTH
MSG-05000: DEBUG: Bill:
MSG-05000: DEBUG: first name: VAUGHN
MSG-05000: DEBUG: family name: FAUTH
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: country Code: U.S.
MSG-05000: DEBUG: country Desc:
MSG-05000: DEBUG: print flags home: N
MSG-05000: DEBUG: width: 40
MSG-05000: DEBUG: minimum height: 8
MSG-05000: DEBUG: Max height: 8
MSG-05000: DEBUG: Bill to the format... VAUGHN FAUTH
VAUGHN FAUTH
2481 ROSS CRES.
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
MSG-05000: DEBUG: ship to address...
MSG-05000: DEBUG: tackle the Style:
MSG-05000: DEBUG: address 1: 2481 ROSS CRES.
MSG-05000: DEBUG: address 2:
MSG-05000: DEBUG: address 3:
MSG-05000: DEBUG: address 4:
MSG-05000: DEBUG: City: NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province: SASKATCHEWAN
MSG-05000: DEBUG: Postal Code: S9A3R3
MSG-05000: DEBUG: territory:
MSG-05000: DEBUG: Country_Code: CA
MSG-05000: DEBUG: client name: VAUGHN FAUTH
MSG-05000: DEBUG: Bill:
MSG-05000: DEBUG: first name:
MSG-05000: DEBUG: family name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: country Code: U.S.
MSG-05000: DEBUG: country Desc:
MSG-05000: DEBUG: print flags home: N
MSG-05000: DEBUG: width: 40
MSG-05000: DEBUG: minimum height: 8
MSG-05000: DEBUG: Max height: 8
MSG-05000: DEBUG: Ship To in the format... VAUGHN FAUTH
2481 ROSS CRES.
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
Builder: release 10.1.2.3.0 - Production the kill Sep 25 12:03:07 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Beginning of the FND_FILE log messages
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of the FND_FILE log messages
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Options, AutoComplete, the request for enforcement.
+------------- 1) PUBLISH -------------+
Could not find output service Post processor of post-processing application 25854362.
Verify that the Post processor output service is running.
+--------------------------------------+
+------------- 2) PRINT -------------+
Does not print is not the output of this application because the post-processing has not.
+--------------------------------------+
End of query options AutoComplete.
+---------------------------------------------------------------------------+
Simultaneous request ended
Peut - one please guide me for this question. ?.
Thank you
Verhasselt
Hussein,
Finally my question was solved using the underside of doc,
How to purge Fnd_AQ Tables (Doc ID 1156523.1)
Thanks for your great help and suggestion.,.
Thank you
Vasanth.
-
BQ Aquaris E5 my girlfriend has output MHL as options: 1080 p 30 hz, 720 p 60 hz, 480 p...
Why our Xperia Z3 didn't it?I need, you can add this option to the next update please?
Best regards, thank you.
* #* #7378423 #* #*--> service Test--> Test TV - Out--> video Format
Problem solved, thanks to you all.
-
headphone and speaker output option missing, only digital
I use hp G42 370TU notebook pc, operating system windows 7 (32). A few days back, my headset & speaker option missing only digital out after staring windows. Speaker option & its available after restarting the laptop for several times. After this problem I download & installed the audio driver of hp. But this problem is not solved. Last updated antivirus software is installed on my laptop. I tried reinstalling windows.sound appear after restarting the laptop of seveal times .but once again, he ran out of closing down or sleep or hibernet. I installed latest & old realtec audio driver available for this laptop.but after the beginning of the digital output only windows & the audio driver is missing also. At that time the troubleshooting of microsoft shows no devices speakers or headphones is not connected.please tell me about the probable solution for this problem.
Mr President, I have updted my bios and then installed windows 8 now it works... Thank you for your help.
-
Show deprecated Formats in the output Module settings do not appear in my output option!
Hello I am new using Adobe after effects CC 2014 and all guilds help I look for After Effects say replace your video output such as h.264 (MP4) on did I need to click on the checkbox called "Show obsolete Formats in the output Module Settings", BUT go does not appear on my options area. Only three options are in this section but nothing that calls it. Can anyone help me please with this problem?
See this for an explanation of this change and for the workflow to recommend:
using Adobe Media Encoder to create videos WMV, H.264 and MPEG-2 for After Effects
-
Output options how do preset selection affect?
Hi all
My project is a short documentary film made up of stills, audio, and a title created in After Effects.
My question is about the effect that selections made in the configuration of a project [that is, the new sequence "preset" selection (PrPro) or the new Composition "preset" selection (AE)] made and exit.
What are the installation options (Capture Format/pre-defined sequence) give me the most flexibility in the variety of the available types of output files (especially when the video is not part of the project)? Choice predefined initially affects the ability of Blueray, DVD, Flash output?
Thank you
Randy
That should work fine.
What is the final view of the project? for example, broadcast, web, flash... etc...
-
PL/SQL procedure output options
Hello gurus needed expertise on the following
2 try to write a procedure with 1 Department of parameter
DECLARE cursor that selects 8 columns of the Department
extract 8 passes in 8 variables
another procedure of entry as the 8 settings
loop
using those input parameters falls with a query that joins (treatment of 20 tables)
Post here the results of query
end of loop
close the cursor
My question is for each record of this slider (~ 500 records) select stmt inside the loop with this query produces ~ 1000 lines
How to display these when we execute the procedure (is it possible to produce 1 file for each record of cursor stmt excel) what would be the best option?
Thanks a lot for your valuable opinionsTom Kyte has some solution on AskTom to create csv files
http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:68212348056
You can pass a query to dump_csv and it will create a file.Concerning
Marcus -
I recently bought a Sansa Clip and I was wondering if I could use my previous MP3 player AC charger. The "plug" adapts to the player and has these specifications on this subject:
Input 100-240 V 50/60 Hz 200mA
Output 5V-1000 my (L.PS.)
Thank you for any imput! If I could use it, I would like to take advantage of the savings of $40
Thank you for your comments, Miikerman. I think that the LPS is probably a few brands, but I am not fluent in 'electric', I thought I'd throw it in the mix!
-
I uninstalled the printer driver using "Control Panel configuration/programs/programs and features/uninstall a program" (because I have a new router so need to specify new SSID).
Then I tried to re - install the printer driver using the installation CD.
I inserted the CD, I had small window saying "press to select what is happening with this record."
After I clicked on I got more options - 1 options has been "run SETUP.exe.
I clicked on this & got a new window that says "Select install to begin the installation of your new HP device" but there was only 1 option - EXIT - no other & no list downdown.
I think there must be software always on my PC this CD think that I already have the installed printer driver.
I checked my list of printers & printer inside. I checked my Downloads folder & no priniter files it contains.
Help, please! Thank you.
Hello
The CD is not intended for your operating system, therefore, this behavior occurs.
Download and install the doftware below for Windows 8.1:
Shlomi
-
MacBook Pro 2007 Does not show the headset as an output option
Hi all, I have recently restored a MacBook Pro 2007 for my college work and it works well... Except for one thing. The wearing of the helmet.
I wish I could use my headphone port that I will do a Final Cut Pro here job and likely to spend much time in the classroom when playing audio through the built-in speakers will be disruptive.
I've already replaced the left i/o board with a working version (as the previous owner had neglected it and broke a record in there.) Villain...
If you're wondering, the computer is currently running El Capitan and it seems it well, apart from the question with the headphone jack. I searched in Google for this issue, and most of them seem to be much easier to solve because their use of the helmet IS shown in system preferences, while mine is not. A little weird issues really, especially as the line works perfectly fine! Just not the headphone port...
If anyone can spare a moment to help me with this issue, I would greatly appreciate your help. I love my MBP. So, I want it to work as it should.
Thank you very much
Problem solved! A problem with the IO card. I've fixed since the question and making works normally.
-
Hi hussein.
EBS 11i
RHEL 4.6
Matalink support advised me to run:
What happens if I run FND_CONC_CLONE EXEC. SETUP_CLEAN;7. SQL> select node_name, node_mode, status, SUPPORT_CP, SUPPORT_FORMS, SUPPORT_WEB, SUPPORT_ADMIN, PLATFORM_CODE from fnd_nodes; 8. If invalid nodes or ip addresses are present and you are autoconfig enabled, shut down managers and run the following to clean the system tables: SQL> EXEC FND_CONC_CLONE.SETUP_CLEAN; COMMIT; EXIT Rerun autoconfig to repopulate the system tables.
And I did not run autoconfig? users will still be able to access the system?
When you run the autoconfig on two levels, all applications and the db levels should be, right?
Thank you very much
Ms. K
Published by: user_unlimited on June 4, 2010 19:02 (replace 'Dear' by name, because someone drew attention that it is inappropriate to use)Hello
What happens if I run FND_CONC_CLONE EXEC. SETUP_CLEAN;
And I did not run autoconfig? users will still be able to access the system?The FND_NODES table will be empty and you will need to run the automatic configuration to complete this table.
When you run the autoconfig on two levels, all applications and the db levels should be, right?
Database and the database listener must be facing up when you run the automatic configuration service. It is recommended that you to bounce application services after the filling of the FND_NODES table.
Thank you
Hussein
Maybe you are looking for
-
The subscription number.
Hi I'm jamila. I bought 120 min for 3 months of credit Skype. I received the mail order delivery also. But still it is not enabled. Kindly do the needful. By Jamila
-
Satellite M100-165 cannot stop - turns on automatically after a few seconds
Hello! I have the problem of identical or very similar to those described in the threads:Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15325]Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageI
-
Windows Update, error 80200010 # WindowsUpdate_dt000
The message referenced above is the error in trying to fill three 3 important updates to my computer, I received. Two 2 updates installed correctly and completely, however, one (1) does not. In chicking on icon troubleshooting he, I will put this e
-
I try to run the difficulty here... Changes in the size, the view, the icon or the position of a file are lost: http://support.microsoft.com/kb/813711 .. .He is trying to install Microsoft Automated Troubleshooting Services, but I get this error when
-
Hard drives with printers.
I have a Photosmart 7510 multiple function printer. Is there a hard drive? If so, how can I 'clear' the reader?