Pot of paint and monitoring of movement data

Similar Questions

• Move data from Oracle 10 g and 11 g

  Hello guys,.
  I have a question and would appreciate any help/suggestions. We are about to move data from an oracle 10 g and 11 g system. What I need are a few basic suggestions to facilitate this approach. From now on, I plan to use the function exp and imp to move data between 10 g and 11 g. I archive log enabled for the two databases. When I do this approach, does enter check out, then the import log? Other suggestions will be of great help LPB. Thanks in advance.

  Hello

  I suggest you to use the data pump

  Make use of parallelism
  The data pump is reusable
  If you have a good network while using the network option.

  Disabling logging is the best option on the target database when you import the data.
  I have encountered this problem and have shared in my Blog

  I hope this helps you.

  Concerning
  Spengler

• How to control and monitor labview omron plc

  Hello

  I am able to do to communicate with labview 2009 using plc NOR a CPB and Module DSC server via ethernet, but I don ' t now to control and monitor data Boolean plc from labview.

  the machine I use is CPU11 CJ1M Omron CJ1W-ETN21 with. I'm still very new to labview and I hope someone can help me with this and give me some advice on how to proceed. It should also be noted that I can't change the status of the labels directly from NI OPC server itself.

  Here is the simple circuit that I would use as a starting point for the control and monitoring of the data of the PLC from labview:

  

  Thanks in advance for the help.

  You can read from the entry, impossible to write.

  For output, you can read or write.

  However, if you have a scale controlling this line out.

  There will be a conflict.

• I had a hard drive crash and had to move all the data again. Now, I get an error saying that my Visa is not an authorized version. How can I find the product key to reactivate?

  Vista Product Code question

  I had a hard drive crash and had to move all the data again.  Now, I get an error saying that my Visa is not an authorized version.  How can I find the product key to reactivate?  I don't have the sticker on the back and the software I have does not have the code?  I bought this laptop DELL at Best Buy a little more than a year.

  Thank you.

  Hello

  This problem may occur if you make a significant hardware change. See the link provided below.

  Error message when you start Windows Vista: "your activation period has expired".

  http://support.Microsoft.com/kb/925616

  If the OS came preinstalled Dell you may need to contact Dell technical support for assistance.
  http://support.Dell.com/support/topics/global.aspx/support/win7_support/win7_portal?c=us&CS=04&l=en&s=BSD

• Documentation of the painting process: stamp Visible, move to layer together and hide

  I love to capture my screen painting and when I'm actually I make a GIF animated these shots '' process. '' I am trying to automate the process and I managed to find that meets my needs:

  #target photoshop

  app.bringToFront ();

  Stamp the visible layers

  var idMrgV = charIDToTypeID ("MrgV");

  var desc2 = new ActionDescriptor();

  var idDplc = charIDToTypeID ("Dplc");

  desc2.putBoolean (idDplc, true);

  executeAction (idMrgV, desc2, DialogModes.NO);

  Move the active layer for the background of LayerSet 'process '.

  var activeLayer = activeDocument.activeLayer;

  processFolder var = activeDocument.layerSets.getByName ("process")

  activeDocument.activeLayer.moveToEnd (processFolder);

  Now I would like to add a condition to check, whether or not the 'process' layer-set exists, and if not, create it. It should look like this:

  Process Image capture

  V 0.3

  Stamps PEAK Visible (creates a new layer that combines all information visible in the flattened form) and who moves to a 'process' Layer Set.

  Layer is then hidden.

  If the defined layer is not there, it will be created.

  #target photoshop

  app.bringToFront ();

  Check the 'process' layer-Set on the root. Create, where it is not present.

  If (! activeDocument.layerSets.getByName ('process')) {}

  activeDocument.LayerSets.add ();

  activeDocument.LayerSets.name = "process";

  }

  //

  / * {else}

  }*/

  Stamp the visible layers

  var idMrgV = charIDToTypeID ("MrgV");

  var desc2 = new ActionDescriptor();

  var idDplc = charIDToTypeID ("Dplc");

  desc2.putBoolean (idDplc, true);

  executeAction (idMrgV, desc2, DialogModes.NO);

  Move the active layer for the background of LayerSet 'process '.

  var activeLayer = activeDocument.activeLayer;

  processFolder var = activeDocument.layerSets.getByName ("process")

  activeDocument.activeLayer.moveToEnd (processFolder);

  activeDocument.activeLayer.visibility = false;

  The condition seems to be causing the problem, but I have no idea how to solve this problem. If anyone can help?

  OK, here's the script that performs the Act, it requires an additional function to catch what getByName() returns.

  Process Image capture

  V 1.0

  Stamps PEAK Visible (creates a new layer that combines all information visible in the flattened form) and who moves to a 'process' Layer Set.

  Layer is then hidden.

  If the defined layer is not there, it will be created.

  #target photoshop

  app.bringToFront ();

  Check the 'process' layer-Set on the root. Create, where it is not present.

  If (! hasRootLayer ('process')) {}

  var addedLayer = activeDocument.layerSets.add ();

  addedLayer.name = "process";

  }

  Stamp the visible layers

  var idMrgV = charIDToTypeID ("MrgV");

  var desc2 = new ActionDescriptor();

  var idDplc = charIDToTypeID ("Dplc");

  desc2.putBoolean (idDplc, true);

  executeAction (idMrgV, desc2, DialogModes.NO);

  Move the active layer for the background of LayerSet 'process '.

  var activeLayer = activeDocument.activeLayer;

  processFolder var = activeDocument.layerSets.getByName ("process")

  activeDocument.activeLayer.moveToEnd (processFolder);

  activeDocument.activeLayer.visibility = false;

  Function to check if the 'process' layer exists, passes result returned as a Boolean value

  function hasRootLayer (layerName) {}

  var hasProcessLayer = false;

  try {}

  hasProcessLayer = (typeof activeDocument.layerSets.getByName (layerName)! = "undefined");

  } catch (e) {}

  Return hasProcessLayer;

  }

• Not "Move data of Android" option on the iPhone 6 s, ios 9.0.2

  The version on my iPhone 6s is ios 9.0.2 but it doesn't have the "Move data of Android" option which allows me to move data to my iPhone 6. How can I fix it if the option appears?

  See this support article. If you did not select the option move to Android then you have been implemented in the new device, and then you will have to delete it and set it up again (see step 1):

  Switch from Android to iPhone, iPad, or iPod touch - Apple Support

  Good luck

  GB

• I have can´t move data from my Handy (Motorola) to my PC

  Original title: DI

  I have can´t move data from my Handy (Motorola) to my PC

  Hello

  You can download and install the driver for Motorola handy and check if the problem occurs:

  http://www.Motorola.com/us

• I want to copy a picture of the paint and paste it into an email. System always told me that it records to the Clipboard.

  original title: Clipboard

  I want to copy a picture of the paint and paste it into an email.  System always told me that it records to the Clipboard.  Where can I get this Clipboard so that I can paste the photo?   Thank you.

  Hello

  CTRL + C copies to the Clipboard.

  CTRL + V paste it from the Clipboard.

  These FREE utilities will help in the use of the Clipboard.

  InsideClipBoard - free - whenever you have something to copy to the Clipboard to paste in another
  application, the copied data is saved in several formats. The main application of Windows Clipboard
  only display the basic Clipboard, like text and bitmaps formats, but only displays the list of all formats
  which are stored in the Clipboard. InsideClipboard is a small utility that displays the binary content of all
  formats that are currently stored in the Clipboard and allow to save the content of specific format
  in a binary file.
  http://www.NirSoft.NET/utils/inside_clipboard.html

  Another useful utility free allowing you to clear the Clipboard.

  ClipBoard Viewer - free - look inside your Windows Clipboard. See what your favorite
  ask, in four different (TXT, BMP, WMF and DIB) data format. This handy tool can also
  Clears the Clipboard. New version 2.0: now go to the Windows system tray! http://www.KarenWare.com/PowerTools/ptclpvue.asp

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Move data directly from inside the loop

  Is it possible to move data directly from inside a loop outside the structure of matter in real time? I would like a chart of the data in a structure of matter in real time outside the structure of the case. Ideally, it would include information of the real deal and then the waiting period as a '0' for false case. Attached is a version simplified VI I'm working. I tried the local variables, but they only read the first item for loop puts each cycle T/F. One idea is welcome including a complete change in the structure of the VI.

  Thank you!

  
  

• Internet Explorer, MS Paint and accessories are missing from my computer.

  My Internet Explorer, MS Paint and other accessories are absent from my computer, I tried to reinstall them with my XP CD, with no luck, no matter what I do to reinstall it will not load.

  Whats missing I can't reinstall is:

  THAT IS TO SAY 8

  MS Paint

  Calculator

  Word Pad

  Sound recorder

  Volume control

  Character map

  Accessibility Wizard

  Then someone please help me, I have searched the Internet on and tried several things to get these programs comes back with no luck at all.

  
  

  step 1

  before you start to try programs and things

  Save all your data, otherwise if you have missing DLLs you will mess the registry and then are bad

  step 2 

  After trying all the software that you need like antivirus, registry cleaners, defragmenters

  try to look for the icons and programs on the windows system32, don't start with run

  If you find any, you are sure that the programs are installed

  then you will know is a shortcut problem

  step 3  

  in case u find them recreate the icons everywhere u love and change u ensure the safety of you os

  warns we exchange, in the case where u can't find it

  Restart the pc and with f8, go to the last known good configuration

  that way u save a last log

  check is that they appear, if they are not,

  restore the system, or check the economy mode option

  If you see them in the mode without failure, then save and load on the right configuration

  in any case remember that you have wnds f1 help key button

  step 4  

  last option u said that you have a cd of xp re install

   

    

• I need graphic kernel mode driver intel? can I move data on D: drive? I have a problem of EXCESSIVE PAGING

  I need graphic kernel mode driver intel? How to uninstall if I do not have? message bed THIS DRIVER CAUSES the WINDOW to RESUME SLOWLY.   can I move data on the D: drive to the capacity of my drive external hard is 85% AND I don't KNOW HOW to REDUCE the LOAD on the disk, what is the best solution? I tried to add external 500 GB hard drive and 1 gig memory Tanx

  MR. ED

  Hi acdoc,.

  Thanks for your post.

  Here is some information about paging:

  http://en.Wikipedia.org/wiki/paging

  Why do you think that you need an updated graphics driver?

  When you get this message? Is there more information in the error message?

  I suggest to go to the website of the manufacturer for the latest drivers:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  As for your second question:

  As Mick said, what is the D: drive?

  You are able to use the outside now?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• of the laptop and monitor external both go to a black screen

  OK, I have a laptop Toshiba Satellite L675D and monitor external lg I've used for more than a year. the problem I knew it is that when I turn on my external monitor both the monitor to the laptop and external monitor goes to a black screen and to get the office page I have to turn off the monitor external and in a few seconds, the computer desktop computer laptop monitor will reappear. Fault could be the problem?

  Hello

  1. What is the model of the LG external screen?

  2. have you made changes on the computer recently?

  3. have you installed all the updates on the computer?

  Method 1.

  Connect the external monitor to a different computer and check if it works.

  Method 2.

  I suggest to update the graphics drive and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Refer.

  Move windows between multiple monitors: http://windows.microsoft.com/en-US/windows7/Move-windows-between-multiple-monitors

  Setting up dual monitor: two screens are better than one:
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Guided Help: Setup dual monitor is easy in Windows 7:
  http://support.Microsoft.com/kb/976064

  I hope this helps.

• Move data across a table

  Hi guys,.

  I have a question. I will develop a process with a table with two columns col1 and col2, as you can see below.

  CREATE TABLE TEST

  (

  col1 INTEGER,

  col2 INTEGER

  );

  Insert into TEST (col1, col2) Values (2, 23);

  Insert into TEST (col1, col2) Values (30, 34);

  Insert into TEST (col1, col2) Values (4, 3);

  Insert TEST (col1) (43) values;

  Insert TEST (col1) (15) values;

  Insert TEST (col1) (50) values;

  Insert TEST (col1) (4) values;

  Insert TEST (col1) (12) values;

  Insert TEST (col1) (100) values;

  Original data:

  col1 col2

  2 23

  30 34

  4           3

  43

  15

  50

  4

  12

  100

  I need to move data in col2 to the next line like this:

  col1 col2

  2

  30 23

  4            34

  43 3

  15

  50

  4

  12

  100

  Then, perform a function (CORR) and move the data to the next row

  col1 col2

  2

  30

  4 23

  43 34

  3 of 15

  50

  4

  12

  100

  Then, run a function (CORR) and moving the data.

  And... so on.

  Is it an effective way to move the data in col2 across the table without reducing the performance of the applications?

  Col1 has 300 rows and the process will run the procedure described above, an average of 800 times.

  Maybe someone has experience on this... This will help a lot.

  Thanks in advance!

  Hello

  As others have said, there is no order integrated to the rows in a table.  If it makes sense to speak of the 'first' or 'next' line, it is only in a context where an order is known.

  Assuming that you don't have something in your table that indicates in what order they are in, you can use MERGE to do what you want.

  You post CREATE TABLE and INSERT statements for your table, so I'll use the scott.dept table to illustrate.  We will make a copy of the table scott.dept we can update:

  CREATE TABLE my_dept

  AS

  SELECT *.

  OF scott.dept;

  SELECT *.

  OF my_dept

  ORDER BY deptno;

  The output of the above query shows how the table looks like originally:

  DEPTNO DNAME LOC

  ---------- -------------- -------------

  10 ACCOUNTS NEW YORK

  SEARCH 20 DALLAS

  30 SALES CHICAGO

  40 OPERATIONS BOSTON

  Say now, we want to pass the value of the loc on each line to the next line, where "next" means in order by deptno; Like this:

  DEPTNO DNAME LOC

  ---------- -------------- -------------

  10 ACCOUNTING

  20 RESEARCH NEW YORK

  30 SALES DALLAS

  40 CHICAGO OPERATIONS

  We can do it by using a MERGE statement:

  MERGE INTO my_dept dst

  WITH THE HELP OF)

  SELECT DeptNo

  , Trolling (loc) over (ORDER BY deptno) AS new_loc

  OF my_dept

  )              src

  WE (dst.deptno = src.deptno)

  WHEN MATCHED THEN UPDATE

  SET dst.loc = src.new_loc

  ;

  (This assumes that deptno is unique).

  If we execute the exact same MERGE statement once 2nd, then the table will look like this:

  DEPTNO DNAME LOC

  ---------- -------------- -------------

  10 ACCOUNTING

  SEARCH 20

  30 SALE IN NEW YORK

  40 OPERATIONS DALLAS

• LKM to move data from one schema to another in the same DB

  Hello

  I am new to ODI. My question is simple:

  I created a mapping to move data from a table in Figure 1 to another table in Figure 2 (the two schemas in the same Oracle DB.

  What is the best LKM Oracle for performance to use in this case? Most of the LKMs using DB link... but is it really necessary that the two schemas are in the same DB?

  Ive used SQL knowledge SQL module, but I guess it's probably slower strategy.

  Thank you!

  Vitor Moreira

  Hello

  If two phyiscal patterns are on the same database, you want a Phyiscal server with two patterns of phyiscal under this server in your topology, this way ODI will recognize that you don't need a LKM (at all) and mapping will have to IKM / CKM only.

  If ODI is to ask a LKM, looks like the two schemas to belong to their own physical server in the topology browser? In this case, it is not optimal.

  Just make sure that your user has access to two objects in diagrams and you'll be fine.

  If you really want to go Oracle DB Oracle DB then DB link or Datapump for large volumes of data, JDBC/Agent (SQL for SQL) for smaller volumes.

• Hi all, I am wanting to know how to solve this problem, I will have with my creative cloud downloads. I am trying to cancel the application Adobe DC and it download it again. But it's frozen on the "cancellation of...» "and don't move. I can't redownload

  Hi all, I am wanting to know how to solve this problem, I will have with my creative cloud downloads. I am trying to cancel the application Adobe Acrobat DC and it download it again. But it's frozen on the "cancellation of...» "and don't move. I use a mac, I can't redownload until it is gone from the top of the cloud. Can someone tell me if this has happened to them before and what I can do to remove it so I can redownload. Ive put a picture below so that you can understand what I mean.

  

  Hello

  Click the "Finder" on your dock to Open a Finder window. Click on 'Applications' in the side bar of the Finder window to see your Mac applications. In this folder, double-click the folder "utilities". Double-click the "Activity Monitor" icon to access the application.

  Now exit Adobe all associates of process as creative cloud, CC, CCX, Core sync, broker CIB Adobe and then launch creative cloud app again and try to download Acrobat.