RD640 - Easy management, WMI namespace and classes of voltage, power supply, temperature and related areas

Similar Questions

• Beginner: how to manage the pipes and the semicolon with UNIX commands?

  Good afternoon
  I'm writing a Java class that allows to run UNIX commands.
  Launch of the simple commands (to date, ps - ef) works fine, but when I start using of pipes and the semicolon, it won't:
  Java (e.g. hoses) code:

          String command = "ps -ef | grep config";
          Process child = Runtime.getRuntime().exec(command);

  Result:

  usage: ps [ -aAdeflcjLPy ] [ -o format ] [ -t termlist ]
          [ -u userlist ] [ -U userlist ] [ -G grouplist ]
          [ -p proclist ] [ -g pgrplist ] [ -s sidlist ]
    'format' is one or more of:
          user ruser group rgroup uid ruid gid rgid pid ppid pgid sid taskid
          pri opri pcpu pmem vsz rss osz nice class time etime stime
          f s c lwp nlwp psr tty addr wchan fname comm args projid project

  Code Java (example of semicolon):

          String command = "date;ps -ef";
          Process child = Runtime.getRuntime().exec(command);

  Result:

  date;ps: not found

  Clearly the pipes and semicolons are managed by the UNIX shell and can be put in the Java source code as such.
  Does anyone know a way around this?
  Thank you
  Dominique

  Pipes and semicolons are interpreted by a shell (bash, csh, etc.) and when we execute as you do without shell is involved. It is easy to solve by using the alternative version of exec() which takes an array as an argument and use your shell of choice. For example: -.

  String[] command = {"bash", "-c", "date;ps -ef"};
  

  Note that the third argument is the entire order to be interpreted.

  Two points to consider. First you need to read, Digest and apply all the recommendations in http://www.javaworld.com/jw-12-2000/jw-1229-traps.html; otherwise will be at some point lead to a significant loss of hair. Secondly, you should probably use ProcessBuilder rather than Runtime.exec (). Behind the scenes, Runtime.exec () uses ProcessBuilder but ProcessBuilder provides a better interface with more features.

• CD-ROM/DVD-ROM drive does not work. Device Manager indicates problem and there is no volume listed on the Volumes, how to fix tab?

  Description of the drive is HL-DT-STDVD +-RW GSA - T11N ATA Device Properties. Verified drivers and they are up to date.  Under device status "this device cannot start. (Code 10) clicked on search the Solutions, but no solutions are shown.  Have trouble with the DVD because I had the computer and have had several conversations with Dell but I think that my extended warranty just expired.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Is there an easy way to copy and rename an entire project?

  I created a RoboHelp 10 project group with the Windows version of our software for bird watching.

  I need an exact copy that I can then edit and publish with the Mac version of our software.

  Is there an easy way to copy and rename an entire project?

  Hello

  Just open Windows Explorer to the location of your project. (Index, click on a topic in your project manager and choose the option to Explore)

  Copy the folder of the project by using Explorer and paste to create a new copy.

  In RoboHelp, open the copy, click file > rename project.

  See you soon... Rick

• Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications

  Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications. Firefox.exe must be completed manually in Windows Task Manager. Is there a software patch that will force the release of memory and all the resources of the computer that was using Firefox, when it is finished?

  This has happened

  A few times a week

  == I see only the program in the Manager of tasks over the past months but the problem could took place for more

  See this:
  https://support.Mozilla.com/en-us/KB/Firefox+hangs#Hang_at_exit

• Equium A100: How to manage the battery and the AC adapter

  Advice please...

  I use my laptop (A100) mainly as a desktop replacement. What should we do. the power supply cord. Leave it permanently, but don't damage the battery and the means of the laptop is permantly on standby, or constantly updated to recharge the battery every two hours, which is not very practical.

  First laptop, so probably stupid question.

  Hello

  There are different meanings to this topic.

  I manage like this:
  I work on the current, and sometimes only with the battery until it is almost empty. Then I charge the battery while he was still working on current alternative.

  After awhile of use, each battery life to shorten.

  Good bye

• WMI MSSQL missing classes in Windows 2003

  Hello

  I am facing a problem in the follow-up of MSSQL 2008 server that is installed in Windows server 2003 64 - bit Enterprise.

  I need to monitor the MSSQL Server through WMI classes. But I found that WMI classes are missing, when I checked in by wbemtest enum classes.

  Kindly help with this problem.

  Here's the WMI classes that I needed in the follow-up to MSSQL

  1. Win32_PerfRawData_MSSQLSERVER_SQLServerBufferManager
  2. Win32_PerfRawData_MSSQLSERVER_SQLServerGeneralStatistics
  3. Win32_PerfRawData_MSSQLSERVER_SQLServerMemoryManager
  4. Win32_PerfRawData_MSSQLSERVER_SQLServerDatabases
  5. Win32_PerfRawData_MSSQLSERVER_SQLServerSQLStatistics
  6. Win32_PerfFormattedData_MSSQLSERVER_SQLServerBufferManager
  7. Win32_PerfFormattedData_MSSQLSERVER_SQLServerCacheManager
  8. Win32_PerfFormattedData_MSSQLSERVER_SQLServerDatabases
  9. Win32_PerfFormattedData_MSSQLSERVER_SQLServerMemoryManager
  10. Win32_PerfFormattedData_MSSQLSERVER_SQLServerBackupDevice

  If anyone knows the solution, well want to suggest me how to recover missing WMI MSSQL-associated classes.

  Hi all

  I found the solution from another blog... We need run/f wmiadap from the prompt command... so all of the missing classes appeared in the WMI classes...

• HP G62-B50SA: HP G62-B50SA Recovery Manager could not and cannot restart Windows 7

  Yesterday, I threw the Manager of recovery to re - install a release of version Windows 7 box.

  1% of the installation, I get the following error error code: 0xe0ef0003

  After this error, I could not start Windows more BOOTMGR missing

  I tried to press ESC, then F11, but once more, the process has failed

  I had also created recovery CD (in Total I have 4), I try to reinstalled with them by going to F9 and put the CD to be the first boot.

  I get the following error message "this computer does not support the system recovery media. You are not able to restore the system with the media".

  What should I do next?

  Thanks in advance for your help,

  Concerning

  Hello

  Here is another solution, you can try.

  Before you try the following, make sure that you can still read all the key character product activation 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Kind regards

  DP - K

• Task Manager, regedit, run and command prompt are all disabled on my computer.

  Task Manager, regedit, run and command prompt are all disabled on my computer.  Is it possible to fix it because it allows to launch on a network?

  Hello
   
  (1) have tried to start in Safe Mode, Mode safe with network...?
  (2) remember to make changes to the computer before the question?
   
  See the methods mentioned below and check if that helps.
   
  Method 1:
  To start the computer in safe mode with networking
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
   
  Scan your computer for Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   
  Method 2:
  How to remove a computer virus?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-remove-a-computer-virus
   
  See also:
  Microsoft Security Essentials
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
  Hope this information helps.

• Smartphones from blackBerry Desktop Manager 5.0 and hang up Roxio Media Manager

  OK, I spent an hour searching for messages on the forum and not gettting any where.

  Here are the details:

  New laptop with Windows XP - SP3

  New installation of BB Desktop Manager 500_B28_Multilanguage

  I use Sync to update my address book via Ascii one-way.

  What does once.  No problem

  Restarted my laptop.  Now I get Windows Installer looking for Roxio Media Manager.msi and now I can't get rid of it.

  I hit Cancel and it comes back.

  The only thing in Add/Remove programs is Desktop Manager 5.0 and Blackberry Media Sync

  Try to remove one and I get this message 'Installation pending'.

  If there is a problem with 5.0 why is a new version correcting not out?

  Means do a "Clean uninstall" (KB02206) of Blackberry Desktop Software positions, means (KB19218) Windows Installer Cleanup several positions.

  Before I get started, y at - it a real solution?  If I do the clean uninstall and then install 500_B28 I'll hang whenever I start the computer while the installer looking for Roxio?

  Could someone help me please.

  Twas obivous that I was going to get NO HELP from RIM, so I called my IT Department.

  Here's what I've done so far.

  Open the Task Manager.

  In Applications, do a right-click on the RMM install process.

  Left click on go in the process.

  This step puts you on ISUSPM.exe

  Click on end process.

  Click OK.

  Go back to Task Manager, select process

  find misexec.exe

  Click on end process.

  Click OK.

  Go to add / remove programs

  Uninstall the Blackberry Desktop Manager

  Uninstall using DELETE all user settings

  After 15 minutes, finally deletes it on MMR also

  I ran Windows Installer Cleanup Utility (290301)

  verified that no Roxio programs or programs BB were on the computer

  and restarted.

  So far so good.

  Now, I have to decide if I want to put BBDM with or WITHOUT the MM.

• Find Smartphones blackBerry & management of files and PDF display

  Dear all

  I copied the files using Desktop Manager for a memory card on my phone.  Some files are in .xls format and most are in PDF format.

  I have some problems.

  (1) how can I look at the files that are on the media card, and organize files in different folders etc. i.e. is there an application to manage the files. I went to the Applications, Slideshow to Go, then to "Open a file" and traveled to \Media Card\Blackberry\documents where the files should be and nothing shows.

  (2) once I find them, how can I view PDF files - those for example.

  To test this situation, I sent an email from my computer at home test attaching one of these PDF files that was in the file \Media Card\Blackberry\documents as expected. I noticed that each file in the folder had a "?" icon next to it.

  I forwarded email happened to my home computer and I was able to view the PDF file I sent.

  When I went back to my e-mail folder and tried to see - on my phone the attachment I sent it came with the message "this type of attachment cannot be seen on the device.

  When I sent the file to my phone from my computer at home and opened the attachment in the Inbox, this time I was able to view the attachment.

  I hope you can help, because these PDF files contain my rates and I need to access them when I'm on the move.

  Concerning

  George

  If things work out, then you can already see the two letters of extra drive in Windows, that would mean then - no need to re - install anything. If you do not see the letters of readers, then you may not be in on the device mass storage mode?

• Smartphones from blackBerry Desktop Manager for Mac and BlueTooth

  Someone at - it had any luck syncing Desktop Manager for Mac and a Tour 9630 via BlueTooth?

  DM does not support the BT

• Namespaces and the way how?

  I have a problem with the notion of namespaces and the path.

  I try this code

  xml_response variable varchar2 (4000);

  BEGIN

  : xml_response: =.

  ' <? XML version = "1.0" encoding = "UTF-8"? >
  " < s: Envelope = xmlns:S ' http://schemas.xmlsoap.org/SOAP/envelope/ ">
  < Body >
  " < GenerateLabelResponse xmlns =" https://www.mypostbusiness.ch/WSBC/barcode/v2_2/types ">
  <>envelope
  < LabelDefinition >
  < ImageFileType > PDF < / ImageFileType >
  < / LabelDefinition >
  < data >
  <>provider
  send to <>
  < item >
  < > 12346 ItemID < / ItemID >
  < code > 993314781300000277 < / IdentCode >
  < image > Base64 encoded data < / Image >
  < / point >
  < / shipping >
  < / provider >
  < / data >
  < / envelope >
  < / GenerateLabelResponse >
  < / Body >
  < / s: Envelope > ';

  END;
  /

  SELECT x1.*
  FROM XMLTable)
  XMLNamespaces (default 'https://www.mypostbusiness.ch/wsbc/barcode/v2_2/types"")
  , ' / GenerateLabelResponse/envelope/data/provider/consignment/Item.
  by the way xmltype(:xml_response)
  columns
  Path of varchar2 (30) ItemID "/ ItemID',"
  Path of varchar2 (30) IdentCode ' / IdentCode'
  ) x 1
  ;

  and have a return of any line.

  I think that the namespaces determine the root of the path and I have to follow the path since I was in the right column.

  What's wrong?

  Determine the correct path is very simple and intuitive.

  Do not be confused by namespaces.

  Namespace is only part of the name of the node.

  A node name is a qualified name that consists of two parts:

  -a local name

  -a namespace uri

  Consider your current sample where you want the item target .

  You just have to ask you this question:

  'Which node (s) that I have to cross to reach the node of the root target?'

  To answer this question, begin to navigate the XML from the root node:

  (1) s: Envelope

  (2) body

  (3) GenerateLabelResponse

  (4) envelope

  (5) data

  (6) provider of

  (7) shipment of

  (8) article

  Steps 1 and 2 are elements belonging to the namespace "http://schemas.xmlsoap.org/soap/envelope/", this namespace is bound to from the ' prefix in the XML document.

  Rest of the steps up to 8 are elements belonging to namespace "https://www.mypostbusiness.ch/wsbc/barcode/v2_2/types", without the prefix bound but a declaration of default namespace instead.

  If the path is:

  /env:envelope / env:Body / GenerateLabelResponse/envelope/data/provider/consignment/article

  where "env" is the prefix bound the SOAP name space, I could have chosen the of ' as in the document but I intentionally chose another, the only important is the uri that it represents.

  Other nodes in this way belong to the default namespace, so let's not forget declare it as well.

  Final request:

  SELECT x1.*
  FROM XMLTable(
         XMLNamespaces(
           'http://schemas.xmlsoap.org/soap/envelope/' as "env"
         , default 'https://www.mypostbusiness.ch/wsbc/barcode/v2_2/types'
         )
       , '/env:Envelope/env:Body/GenerateLabelResponse/Envelope/Data/Provider/Sending/Item'
         passing xmltype(:xml_response)
         columns
           ItemID    varchar2(30) path 'ItemID',
           IdentCode varchar2(30) path 'IdentCode'
       ) x1
  ;
  

• User Manager to create and use "projects".

  I scanned by the doc and videos, but don't know how to activate a Manager create "projects" and use only "Scheduled" technique

  Any suggestion?

  This is done with the permissions on the roll, in that the Manager will be

  

  Delete the ones you don't want to give them

• Manager of Persona and folder redirection

  I have a small question I want to use the persona Manager, but I have the folder redirection for all of our users.  We HAVE simply to redirect certain folders like desktop, etc.  The problem happens with view.  I have a lot of doctors who insist on the use of several desktop computers (persistent and non-persistent) to do their work on a daily basis.  They use persist so they have their OUTLOOK and when they wander into an exam room that they want to use their desktop NO-persist.  I'm sure I can do what I want with management of Persona, but the folder redirection type of obstruction which.  Is there a way for me to use both so that I can get all the docs to use only a single pool of computers on the view?  Can EMU help me somehow this issue?  Your comments and suggestions are welcome.  Thank you!

  Perry

  It can all be done with non-persistent desktops.

  It is generally recommended to configure the folder redirection for desktop, downloads, documents, etc when you use persona... This keeps the amount of data replicated by persona to a minimum.  It goes the same for EMU.  Management of character has its own folder redirection settings strategy, which is what I use in my deployments.