PowerCLI script to list all the streams

Similar Questions

• PowerCLI script to list all the material

  Greetings,

  I'm looking for a script that will display all the material parameters for disk including my vm, USB, series and parallel ports, etc...

  Found this script for serial ports:

  $vms = get - VM

  {foreach ($vm to $vms)

  Notice-EEG - ViewType VirtualMachine. %{

  if($_.) Config.Hardware.Device | where {$_.} GetType(). Name - eq

  {'VirtualSerialPort'})

  $_. Name

  }

  }

  }

  However how to change it for all material or I need to specify each potential device?  How can I get a list of options, for example, where I find that 'VirtualSerialPort' is an option?

  Also how I got out to a csv file.

  Try this

  Get-View -ViewType VirtualMachine | %{
       $vm = $_
       $_.Config.Hardware.Device | Select @{N="VM name";E={$vm.Name}},@{N="HW name";E={$_.GetType().Name}},@{N="Label";E={$_.DeviceInfo.Label}}
  } | Export-Csv "C:\VM-HW.csv" -NoTypeInformation
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Create a script to list all the .bat and .cmd files with the dir command &

  Hello

  Im trying to create a script that will list all the .bat and .cmd files in a specific folder and add the data to a new file (file.txt) - example below:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat>>desktop\file.txt/OD

  IM able to search the F drive and the list of all the .bat files using a generic parameter, but ideally id like to search for .bat and .cmd files, but whenever I have it try does not work. Any ideas?

  I tried the following:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat,*.cmd>>desktop\file.txt/OD

  Any help is appreciated, the reason for which I need to check all the .bat and .cmd files is to ensure that the scripts on a cluster are all data, so need them all listed in a doc if possible

  Thank you

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for guys official script Forum. Please ask your question in the official Scripting Guys Forum.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

• Script to list all the VMS and their scsi controller

  Hey guys,.

  New to scripting and my boss is looking for me to get a list of all the vm in our environment and the type of scsi controller they have. It seeks to go to paravirtual controller and need to know what vm, he needs to hit. I saw there is a script to change the paravirtual but he won't do it again, just the list including vm has what. Any help would be greatly appreciated.

  Thank you

  Rich

  Something like that?

  Get-VM | Select Name,@{N="Controller Type";E={Get-ScsiController -VM $_ | Select -ExpandProperty Type}}
  

• Script to list all the warehouses of data in a cluster, the virtual machines on the data store and the host of the virtual machine is on

  We have warehouses of data which are seen by more than one cluster. I need a script that will display:

  all stores of data seen by a cluster

  the virtual machines on the data store

  the host of the virtual machine is on

  the cluster the host is in

  The output I want is

  name of the store of data, the VM name, host name, the name of the Cluster

  any help would be appreciated

  Pretty sure this will do what you need:

  $report = @()
  Foreach($cluster in Get-Cluster){
      $datastores = $cluster | Get-VMHost | Get-Datastore
      foreach($datastore in $datastores){
      $vms = $datastore | Get-VM
      If ($vms.count -ge 1){
          foreach($VM in $vms){
          $object = New-Object -TypeName PSObject -Property @{
                Datastore = $datastore.Name
                VM = $VM.Name
                HostName = $VM.VMhost
                Cluster = $cluster
              }
          $report += $object
          }
  
      }
      }
  }
  $report | Export-Csv C:\Temp\VMs.csv -NoTypeInformation -UseCulture
  

  If you only want to shared data warehouses you can then use

  $datastores = $cluster | Get-VMHost | Get-Datastore | Where {$_.Extensiondata.Summary.MultipleHostAccess -eq $True}
  

  Hope this helps

• PowerCLI Script to get all the data in a row store...

  Hi all

  What I'm trying to accomplish is to get this type of output:

  Cluster, host, WWN1, WWN2, Datastore1, Datastore2,..., data store DatastoreX

  So 1 row for each host, with attached all warehouses of data in the same row

  Number of data warehouses can vary from 1 to 30.

  So far, I have created this script:

  $clusters = Get-Cluster | sort
  
  
  
  $StorageInfo = @()
  
  
  
  foreach ($cluster in $clusters){
      Write-Host $cluster
      
      $VMHosts = Get-Cluster $Cluster | Get-VMhost | sort
      foreach ($VMHost in $VMHosts){
          $Vendor = "" 
          $VMhostname = $VMHost.Name
          $WWN1 = "{0:x}" -f ($vmhost.ExtensionData.config.storagedevice.HostBusAdapter | Where { $_.Key -match "FibreChannelHba" })[0].PortWorldWideName
          $WWN2 = "{0:x}" -f ($vmhost.ExtensionData.config.storagedevice.HostBusAdapter | Where { $_.Key -match "FibreChannelHba" })[1].PortWorldWideName
          
          if ( ($vmhost.ExtensionData.config.StorageDevice.ScsiLun | Where { $_.Key -match "Disk"}).count -gt 1 ){
              $Vendor = ($vmhost.ExtensionData.config.StorageDevice.ScsiLun | Where { $_.Key -match "Disk" -and $_.Model -notmatch "Block Device"})[0].Vendor
              } else { 
              $Vendor = ($vmhost.ExtensionData.config.StorageDevice.ScsiLun | Where { $_.Key -match "Disk" -and $_.Model -notmatch "Block Device"}).Vendor
              }
          
          $Datastores = $VMHost | Get-Datastore | sort
          foreach ($Datastore in $Datastores){
                      
              $myObj = @()
              $myObj = "" | Select Farm,HostName,WWN1,WWN2,Vendor,Datastore
              $myObj.Farm = $Cluster.Name
              $myObj.HostName = $VMhostname
              $myObj.WWN1 = $WWN1
              $myObj.WWN2 = $WWN2
              $myObj.Vendor = $Vendor
              $myObj.Datastore = $Datastore.name
                             
              $StorageInfo += $myObj
              }
          }
      }
      
  $StorageInfo | convertto-csv -NoTypeInformation | Out-File ./Storage-info.csv    
  
  
  

  But this gives me a line by the data store, as well as several lines for each host.

  Could someone point me to a method how to proceed?

  Thank you and best regards,

  Harold

  You can use the Join function

  Something like that

  $clusters = Get-Cluster | sort
  $StorageInfo = @()
  
  foreach ($cluster in $clusters){
      Write-Host $cluster
      $VMHosts = Get-Cluster $Clusters | Get-VMhost | sort    foreach ($VMHost in $VMHosts){
          $Vendor = ""
          $VMhostname = $VMHost.Name
          $WWN1 = "{0:x}" -f ($vmhost.ExtensionData.config.storagedevice.HostBusAdapter | where { $_.Key -match "FibreChannelHba" })[0].PortWorldWideName
          $WWN2 = "{0:x}" -f ($vmhost.ExtensionData.config.storagedevice.HostBusAdapter | where { $_.Key -match "FibreChannelHba" })[1].PortWorldWideName
  
          if ( ($vmhost.ExtensionData.config.StorageDevice.ScsiLun | where { $_.Key -match "Disk"}).count -gt 1 ){
              $Vendor = ($vmhost.ExtensionData.config.StorageDevice.ScsiLun | where { $_.Key -match "Disk" -and $_.Model -notmatch "Block Device"})[0].Vendor
          } else {
              $Vendor = ($vmhost.ExtensionData.config.StorageDevice.ScsiLun | where { $_.Key -match "Disk" -and $_.Model -notmatch "Block Device"}).Vendor
          }
  
          $Datastores = [string]::Join(',',($VMHost | Get-Datastore | sort | %{$_.Name}))
  
          $myObj = "" | Select Farm,HostName,WWN1,WWN2,Vendor,Datastore
          $myObj.Farm = $Cluster.Name
          $myObj.HostName = $VMhostname        $myObj.WWN1 = $WWN1        $myObj.WWN2 = $WWN2        $myObj.Vendor = $Vendor        $myObj.Datastore = $Datastores
          $StorageInfo += $myObj    }
  }
  
  $StorageInfo | convertto-csv -NoTypeInformation | Out-File ./Storage-info.csv 
  

• PowerCLI script to list the df - hl on all ESX hosts?

  Hi Expert,

  I have more than 100 esx host, and I need to list all the df - hl out for my report. Y at - it instead of connect on each esx host to get under output, powercli script that I can use to remove similar information?

  Size of filesystem used Avail use % mounted on

  / dev/sdaa2 20G 1.5 G 17G 8%.

  / dev/CCISS/c0d0p1 1.1 G 118 M 909 M 12% / Boot

  / dev/sdaa6 9.7 G 151 M 9.0 G 2% / Home

  / dev/sdaa7 9.7 G 151 M 9.0 G 2% / tmp

  / dev/sdaa5 9.7 G 317 M 8.9 G 4% / var

  / dev/sdaa8 494M 212 M 257M 46% /vmimages

  Please advice. Thank you

  Are you allowed to enable SSH on servers ESX (i)?

  And are you allowed to establish a SSH session on each ESX (i) Server?

  You have an account and a password on each ESX (i) server that can run the command 'df '?

  If it is Yes, then you can use something like plink.exe in consequence of PuTTY to connect to each ESX (i) server, run the command "df" and retrieve the output.

  There are several available examples to use plink.

  And don't forget that you will need a fingerprint for each server ESX (i) will be stored on the client from which you are running the script.

• Need a PowerShell Script to list all my stores of data, capacity and VMFS format.

  All,

  I need a script to list all my stores of data, capacity and VMFS format.

  That's what I have so far but its does not give me the results I need.

  Get-Datastore - Datacenter MN_PROD | where {$_.} Type - eq "VMFS"} | Select-Object Name,@{N="VMFS version. {E = {$_.Info.Vmfs.Version}}

  Try like this

  Get-Datastore -Datacenter MN_PROD | where {$_.Type -eq "VMFS"} | Select-Object Name,CapacityGB,    @{N="VMFS version";E={$_.FileSystemVersion}}
  

• How to list all the vm with a snapshot?

  Hi, I need to have an overview of all the my virtual machine using a snapshot.

  Is there a function / script to receive all the days of the information by mail, for example?

  Concerning

  You can see Alan Renouf vCheck daily report using PowerCLI, vSphere SDK for Perl solution looking for, take a look: VMware vSphere Health Check Report v5.1.0

  The two will provide you with information about snapshots in your environment, Alan script, it's more than a daily report you are looking for and it email

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• y at - it a web page that lists all the supported versions of Firefox?

  We wish to state our user doc recommended Firefox versions. So it is the web page that lists all the supported versions of Firefox and can also, we have a list of dates to drop support for versions currently supported?

  Yes, it has changed a bit since this thread was started 9 months ago. Support for Firefox 3.6.x continues and versions 4 + lose support at the next new version is available. Support for Firefox 7 ended when Firefox 8 came out yesterday 11 / 08.

  Support for 3.6.x will likely end early next year when the proposed new ESR (Extended Support Release) comes to massive institutional facilities / corporate. ESR is proposed for a week 42 version support cycle timetable of a 'standard' of the week quick release 6.

• List all the songs?

  Hi, I have a quick beginner question:

  I just finished all my music on my new SanDisk Sansa clip + loading, and I've encountered a problem. In the individual sections for each of the artists, there seems to be no way to list all of the songs from this particular artist in my library. Instead, there are only folders for each album and the "Play All" option. Now if I want to play a song in particular of this artist, I have to go to the respective album folder and select the song. It works fine if I remember the album for every song I want to play, but if I don't remember, I go through each folder.

  What I saw before with portable mp3 players is a way to list all of the songs from a particular artist in alphabetical order, regardless of the album sound in. Is it possible to do this with my device? I've been looking in the menus on the camera itself and on this forum, but so far without success.

  Thank you!

  You can see all the songs by an artist when choosing the artist, play together, and then pressing the button at 6 oclock and choosing back to the music list. The song list will however in alphabetical order. They will be in order, based on the album order, IE. first albumm 1 (based on the number of track), the song2 song, song 3,... Finally, the second song on the album 1, 2, song etc.

  Would be nice if they could be presented in alphabetical order. I guess as a workaround you could try to put all the songs by an artist in one folder, then by browsing the folder using music files. Lists all the songs by an artist alphabetically (asuming the file name is the name of the song). I guess this could become unmanigable but when you have a large number of songs of an artist. Having too many songs in a single folder can bog down the player.

• How to display this window that lists all the devices of storage connected to my PC?

  How to display this window that lists all the devices of storage connected to my PC? It lists each device, how much space is used and how much is free? I sometimes open it by accident, but I can never find it when I'm looking for it.

  original title: storage devices

  Beginning

  Control Panel

  If you the small icons view do the following:

  Administration tools

  Computer management

  Storage

  Disk Managment

  If you have the category view do the following:

  System and security

  Administration tools

  Computer management

  Storage

  Disk management

• How to list all the files in a backup job?

  User GreyGnome:

  I would like to get a list of all the files on a file system backup task. Is this possible?

  Through the CLI, if possible. On Linux.

  Thank you.

  Posted by AdrianMoir

  Hi GreyGnome,

  You can actually set this via the user interface on the backup options for employment. See attached picture.

  This will allow you to define a path and file name of a text file that lists all the files that are backed up by work, when the work is performed.

  Once the option set is saved under a name, if you create jobs through the CLI, with nvjobcreate, you can specify the selectionoptionsetname - , by using the name of the set option that you created with the entry 'Path to Backup Log'.

  The text file will display the name of the file in the following attributes...

  Backup Path, State, Type, size (bytes), Timestamp, attributes.

  Thank you very much

  Adrian.

• How to list all the users on the Windows 8 Pro welcome screen

  I work for a small company based in the House of my boss of IT services. Because he runs the company, all the computers in the House are on a domain Active Directory (ease of management and control). Because he runs the company from his home, several of these computers are tablets/touch screens for his children, all upgraded to Windows 8 Pro.

  Currently, the default behavior of Windows 8 at startup is to display the Welcome screen showing the last user who opened a session with an option to switch to another user. If "Other user" is selected, a complete login prompt appears requesting a user name and password. This is standard fair for Windows 8, especially on a domain.
  He wants to do me is to find a way to allow a style of Windows XP (workgroup) Welcome screen displaying all the available avatars with user accounts, allowing so a child to click easily their user account and enter a picture password without ever seeing the on-screen keyboard.
  To rephrase: we want the Windows 8 Pro welcome screen to list all the (or specific, if possible) allowing anyone of you users connect to the computer without entering a user name and only enter a password (or picture password).
  I searched the web carefully and it seems that Microsoft can have deprecated this feature in an update of Windows 7 - many people shouting right lose their old welcome screen after an update. I read in the case of registry (removal of corrupt profiles and .default) hacks, security policy settings (interactive logon: do not display last user name = disabled), account policy (control userpasswords2 > uncheck: users must enter a password...) and a few other suggestions that had mixed results, which none apply to the present case , either because the settings are already in place, or because they are not available due to being on a domain.
  I'm open to exploration of any kind of registry or 3rd party software hacks that can provide this functionality. Win8 default behavior is absolutely horrible for tablets - it should be easy for multiple users to connect to a device without using a screen keyboard to enter their username and password. WIN8 is halfway there with passwords of photo, but we still have to enter a user name for all, but the user recently.
  Thanks in advance!

  Hi Jayce Nornin,

  Please be informed that he has no option to list all the users on the Windows 8 Pro welcome screen.

   

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• I can download more pictures from a SD card to Lightroom is.  I can download pictures or Aperture but Lightroom CC gives me the error "the following files were not imported because they could be readable." and then it lists all the files on the disc. I sh

  I can download more pictures from a SD card to Lightroom is.  I can download pictures or Aperture but Lightroom CC gives me the error "the following files were not imported because they could be readable." and then it lists all the files on the disc. I shoot in Raw.  I know it's a problem because I see the number of entries when I have the problem of google.  What I don't see is Adobe recognizing the problem OR suggest a solution.  It is a big problem since I have to find ways to get photos in Lightroom.  Can you please tell me what I should do to get my pictures downloaded.  I had no problem before subscribing to Adobe CC when I used 5 Lightroom.

  A changes to privileges stick? Check the folder again. Should look like this - see image. Also check similar to the folder that you copy photos to.