PowerConnect 2824 cannot enter in the web interface

Similar Questions

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• Cannot connect to the Web Interface using IE9 idrac6

  Hello world

  I was appalled last Saturday when I have downloaded voluntarily a remote server knowing that I would use the idrac to bring up, to see that when I tried to connect to the idrac he wouldn't my password.  I had to call the customer and send them to the site on Saturday night and I was very angry about this.

  After being, upward, that I tried several times to connect remotely and it still would not accept my password, I tried the reset of the OM Server page, but not to go.  I would put my password and it should Flash quickly "Access please wait" at the bottom of the screen, and then he would just go back to the login screen.

  I thought maybe it was a browser security issue, so I tried to add the remote site to my trusted sites and lowering of safety, but it did not help, so I tried various is to say like compatibility mode settings and still no go.  This has been tried on 2 different machines to Windows 7 with IE9, a x 64 and x 32.  Then I thought that I would try Chrome instead and it worked fine...

  So I tried a VM XP with IE8 on it, and it worked well.  It seems so - that IE9 is the culprit.

  I called in the systems management team and we tried which helps some ActiveX controls in the zone of confidence, but it did not help and he me basically what IE9 doesn't play well with the drac's and they are working on an update to fix the problem.

  This is perfect and I accept it, because I know I can get with another browser if I had to, but someone has actually managed to make it work with IE9?

  I have the same problem. But, I have found that if 'Remove' all under 'Browser history' (check everything: Cookies, history, temporary Internet files, etc...) it will allow me to connect and work for a while. Then I after a bit, it stops working. So again, I delete all log and work harder. This was a major pain in the rear lower.

  Oh, but I never have the ActiveX/native console to work. But I'm just using the Java plug-in.

• Aironet 1240AG - cannot use the web interface

  I'm trying to set up a new Aironet 1240AG. After that she won an IP from the DHCP in my LAN, I can always connect using the web interface. I use an Internet Explorer 6.0 on Win 2000. It keeps telling me cannot find the server. Please I need help

  Hi Olivier,.

  First off you're welcome :) This method really works without the need for a WLC, be patient. Check the address static IP put you on your TFTP (* range 10.0.0.2 to 10.0.0.30)

  Rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point

  Looks like a problem TFTP (no firewall on your PC?)

  Take a look at the details in the following threads that each has to do with TFTP. There are some great tips to troubleshoot TFTP some of my NetPros favorite ScottMac, Cisco's Stephen and Jack Young. The likely culprit may be you need to uncheck "Hide extensions for known file types" on your server TFTP;

  http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc042b/8#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc03c4/2#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddbf271

  I hope this helps! Good luck!

  Rob

  Remember messages useful rate...

• NAS200: Unable to connect to the Web Interface

  Just set up my new NAS200.  I could install two (2-1 TB disks, RAID1) disks and set the IP address.  However, I can not connect in the administration area of the drive to set up users, shared directories, etc..  The doc on the CD has no value.

  When I run the initial Setup, I wonder for a pawword.  I enter the password that I entered in initial Setup, and I get.  However, this leaves me not do anything other that configure stuff of basic training.

  Someone at - it suggestions?

  Thank you.

  mechanism

  I was able to eventually get through the web interface.  It turns out that the system was not ready yet.  I have 2 1 TB drives in a RAID-1 configuration, and it took the best part of 2 days to get into shape.

  Once I was, I updated the firmware, and things seem to be working very well now.

  mechanism

• SX10 - how to access the web interface behind a firewall

  Howdy

  I have a very simple configuration, router and behind her SX10. I can't access the web interface of the remote unit. Is there a port that I need to activate or something?

  When the device was connected directly to the modem, with the public IP address, I was able to connect to the web interface.

  any suggestions here?

  I enter anything in the field AllowRemote.

  Thanks in advance!

  Web interface can be accessed using HTTP ether (80) or HTTPS (443).  To you how you want to deploy, but you can use NAT on the router, port forwarding, or even put the SX10 in DMZ on the router.

• VLAN and the SSID does not not in the Web Interface

  We have a couple of APs which do not show the VLAN and via the web interface of AP SSID.  If you go to the SSID Manager page in the web interface, the page rises but doesn't show any SSID configured.  It goes the same for Services - Vlan.  This page appears but does not show in any VLANS configured.  If you telnet to the APs, you see the mssid listed and all the SSID interfaces.  The SSID on the access point is functional and working.  It is just so hard to use the web interface for these APs.  I tried to compare configs running on APs where the web interface does not show this and APs that it shows, but cannot see any differences.

  Thank you.

  Have you tried with different browsers?

  Nicolas

• Not able to connect to the web interface for a C20

  I have a C20 running 6.0.1 and impossible to access the web interface. I checked all the IP settings using the remote and have achieved nothing out of the ordinary. I am able to ping the C20 and get the cisco logo on the tab of the internet Explorer, but cannot connect. Someone at - it experianced this before?

  Hi Justin,

  Where you can do telnet/ssh to the codec and only the web interface does not come to the top, well want to check HTTP and HTTPS mode and turn it on according to the requirement;

  xConfiguration HTTP NetworkServices Mode: on

  xConfiguration HTTPS NetworkServices Mode: on

  In addition, it is registered on any CUCM?

• Would it be possible to have the 'Messages' app in the web interface for iCloud?

  I love writing my TEXT with my iMac or my Macbook.

  But when I'm at work, I'm working on a Windows PC.

  So I was wonderning if, one day, Apple could add this app to interface web iCloud.

  This year only, I used an Android phone, I did it with a third-party application (called MightyText).

  A small part has been installed on the phone and wrote messages on the web interface of MughtyText.

  Send your request for feedback:

  Return of goods - Apple

• Apple a day will include Messages in the web interface for iCloud?

  Hello world

  That I really like to write my text Messages on my iMac and MacBook Pro, I was wondering if, one day, we will be able to send text messages from the web interface for iCloud.

  I mean, the 'Messages' application might appear with all the others.

  

  During my short time with an Android phone, I used text powerful app. I had to associate the application phone on a Google account and connect to the web interface powerful text with the same Google account.

  It was pretty cool and useful.

  So, I'm thinking the solution to include 'Messages' to iCloud so that non-iMac users could write SMS with their keyboard too.

  THX.

  This is a user to user community, Apple will not read your comments, if you have any suggestions that you think might improve iCloud, you can send Apple your your comments here.

• Serial number on the web interface

  Is there a place on the web interface to find the serial number? I have more than 50 of the latest devices at remote sites that I have to manage and get an inventory without human intervention on the sites.

  Hi drumfreek,

  Sorry to say, but the serial number is found only on the physical device.

• jumble of text in the web interface after Web Services update / firmware

  I received a message on the screen of my Officejet 6700:

  Update recommended

  An update is available for Web Services (ePrint and Apps).

  Do you want?

  I chose to update now and it installed fine, or so I thought.

  I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

  I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

  On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

  Cartridges installed

  Color | Magenta | Cyan | Yellow | Black

  Part number

  Type

  End of warranty date (A-M-J)

  First Installation Date (A-M-J)

  Area of ink

  USE

  HP

  But after the software update, it says this:

  Print the self-test Page

  L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

  Use of the accumulated media

  Date

  L@S#0477

  L@S#0561

  L@S#3345

  In addition, the order "supplies" link, with a contextual text of "print order supply."

  now, says "Cartridge", with a contextual text ' block unwanted faxes '

  And "Print Printer Status Report" now says "L@S#2567".

  I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

  Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

  Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

  How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

  I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.
  
  I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
  The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

  The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

  Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

• WVC54GCA Missing WPA/WPA2 security in the web interface options

  I just had a WVC54GCA and discovered that there are some missing configuration options in wireless settings:

  On the web interface of cameras:

  Web interface > base: Wireless Settings > [modify security settings] > Security Mode:

  the drop-down list gives me two options: Disable WEP, but not WPA, WPA2.

  I've upgraded to the latest firmware (1.1.00 build 02), but the problem remains.

  Tried different browsers (Firefox 3.5, IE8) with the same result.

  Is this a bug in the firmware?  A defective unit? Anyone else having the same problem?

  Try to reset your IE browser settings and then try to connect to your camera configuration page and check if you are able to find that the options... If it is still impossible to find the WPA/WPA2 Option on your camera, press and hold the reset button for 60 seconds... Release the reset button... Unplug the power cable from your camera, wait 60 seconds and reconnect the power cable...

  Now check if you are able to find that the options... If still no so I think this could be the problem with the camera...  I think that you need to replace your camera.

• N3048 access to the Web Interface without OOB

  I recently had our switch replaced by RMA and have access to the web interface via oob. I'm not sure how to access ports and other subnets and want to access the web interface of the server room outside. It's probably something very obvious, but I don't have the original switch to check the configuration. Any help would be appreciated. Thank you.

  You can use in-band or oob access to administration from inside or outside the server room.  The port of oob is a completely separate network used for management only, but you can also use a port in the Strip management.  By default, VLAN 1 is usually used in the Strip to transport of management traffic.  If you set an IP address on VLAN 1 you should also be able to manage from this IP address.  Measures would be to define the IP address on VLAN 1, ping ping to test connectivity, remote and then use your browser to connect to the web INTERFACE.  You should be able to use the same username/password that was used for the oob port.  Without a set of name of user and password, the web INTERFACE will not allow the session.

  B

• PC54x8 access to the web interface of WS2012

  Hello. We have a strange problem. Because we are not networking gurus, we use the web interface of the switches to manage them (instead of using the CLI). The problem is that when connect us to the web interface of WS2012, the browser (IE) freezes. We tried this on several machines of WS2012.

  Management of WS2008 R2 works without problem.

  Is this a compatibility issue with IE10 (WS2012) compared to IE9 (WS2008 R2) or something else? I tried to add the address IP for trusted sites, but that did not help. Unfortunately only the servers with WS2012 are connected to this particular switch, so we are unable to manage it more (from the web interface).

  Any ideas what could be the cause of this? The web interface requires Java? Given that we have not installed on WS2012 servers.

  Unfortunately I found no work around to get the software to work with IE10. The recommended solution is to use another browser, which as you've found, works very well. I believe that the idea is that in future updates that IE10 will be supported, but I don't have a roadmap on how that would be released.