Not able to connect to the web interface for a C20

I have a C20 running 6.0.1 and impossible to access the web interface. I checked all the IP settings using the remote and have achieved nothing out of the ordinary. I am able to ping the C20 and get the cisco logo on the tab of the internet Explorer, but cannot connect. Someone at - it experianced this before?

Hi Justin,

Where you can do telnet/ssh to the codec and only the web interface does not come to the top, well want to check HTTP and HTTPS mode and turn it on according to the requirement;

xConfiguration HTTP NetworkServices Mode: on

xConfiguration HTTPS NetworkServices Mode: on

In addition, it is registered on any CUCM?

Tags: Cisco Support

Similar Questions

  • HP 8500 replaced, software does not detect printer even though I can't ping / connect to the web interface

    Windows 7 Pro 64

    Reference Dell

    Printer connected via ethernet

    software worked well until the printer has been replaced by HP under warranty

    in the new device, the screen of the wizard to set the time/language etc.

    Software HP does not detect the device and so I can not use all the features.

    I can connect to the printer via IP and also tried to put the TCP/IP port with printer static IP. Can I print using this, but the software "suite" does not detect the printer.

    Removed all software, cleaned the registry, removed the IP port, re-installed the software, does still not detect printer.

    Installed HP printer diags and it passes all the tests, but the suite software HP will always be NOT detect printer.

    Tried without firewall, tried with, still can ping printer, connect to the web interface, the static value, always the software does not detect the printer... so whats left to please other than an another replacement warranty which is used to solve the problem, as it is definitely bad coding in the suite.

    I also tried downloading drivers/full later on the HP site.

    Note that all windows updates are met, reconstruction is out of the question that it is a machine of the company and would almost take me 3-4 days to replace all the software on it (Sage, DW, COFFEE, HMRC).

    Hi-Dillion, Declan

  • I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

    Activate printer F4580

    I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

    Hello

    ·          What browser do you use to connect to the Internet?

    The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

    Step 1: Make sure that the desired printer is set as the default printer:

    http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  • Not able to connect to the server via the AFN TCP

    Hi all

    After Googling carefully I finally decided to post my problem which is really sent me nightmares.

    In my application, I try to connect to a TCP server by using the operator of internet network and after the connection string

    URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; connectionTimeout = 30000; APN =; tunnelauthusername =; tunnelauthpassword =; » ;

    I am able to connect to the internet using the phone's browser, but not able to connect to the TCP server via app.

    In my device APN authentication is disabled by default and the AFN, the name of user and password fields are white that's why I took these settings like white with a value in the connection string.

    When I try to connect via wifi network using the suite of string

    URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; interface = wifi; connectionTimeout = 30000;

    I am able to connect to the server, but not in the case via the AFN.

    Please help me...

    I'm here just stuck and not finding a way out.

    Thank you

    Finally I found the solution to the problem...

    I used ConnectionFactory (network API) to connect to the TCP server and the used connection string is just

    'socket://127.0.0.1:8089 '.

    No need to specify the APN, user name, and password.

    Here's the code used

                     ConnectionFactory connFact = new ConnectionFactory();
                  ConnectionDescriptor connDesc;
                  connDesc = connFact.getConnection("socket://127.0.0.1:8087");

  • I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

    Hi, I'm a newbie to Vcenter.  I just found out that I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

    Hello Cy1989,

    Check the items below in your vCenter server.

    1. check that VMware VirtualCenter Server service is started otherwise starts pls start...

    2 Vefiry VMware VirtualCenter Management Web Services is started otherwise start pls start...

    3. check that the configuration of the ODBC Data Source (DSN) used to connect to the database for vCenter Server is correct.

    4 Vefiry database are running and all required database services are running...

  • Application is not able to connect using the Oracle SCAN chain

    Dear Oracle gurus

    We have 11g r2 11.2.0.3.0 2 cluster nodes

    We have configured the scanning using scan-vip single using/etc/hosts file resolution

    Our app to work correctly using the string of double local Vip (10g method)

    Scan works very well in the database server when we check using sqlplus

    Works very well in the database server Oracle SCAN

    Sqlplus DB - 1 test bench / testbed@my-db-scan:1521 / orcl

    When we use it below URL JDBC in Tomcat Version-6 then "doesn't allow not to connect even if there will connect a while but connectivity isn't stable when we reboot the tomcat"

    Hibernate.Connection.URL=jdbc:Oracle:Thin:@My-DB-Scan:1521/ORCL

    Application is not able to connect using the Oracle SCAN chain

    [May 13, 2013 12:48:24] [INFO] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: init() Called.
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: adding the data manager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 1: com.cmp.mysm.hibernate.core.system.staff.HStaffDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 2: com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 3: com.cmp.mysm.hibernate.core.system.profilemanagement.HProfileDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 4: com.cmp.mysm.hibernate.core.system.accessgroup.HAccessGroupDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 5: com.cmp.mysm.hibernate.systemaudit.HSystemAuditDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 6: com.cmp.mysm.hibernate.datasource.database.HDatabaseDSDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 7: com.cmp.mysm.hibernate.datasource.ldap.HLDAPDatasourceDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 8: com.cmp.mysm.hibernate.sessionmanager.HSessionManagerDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 9: com.cmp.mysm.hibernate.sessionmanager.HASMDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 10: com.cmp.mysm.hibernate.digestconf.HDigestConfDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 11: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 12: com.cmp.mysm.hibernate.externalsystem.HExternalSystemInterfaceDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 13: com.cmp.mysm.hibernate.servermgr.drivers.HDriverDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 14: com.cmp.mysm.hibernate.servermgr.drivers.subscriberprofile.database.HDatabaseSubscriberProfileDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 15: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 16: com.cmp.mysm.hibernate.servicepolicy.auth.HAuthServicePoilcyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 17: com.cmp.mysm.hibernate.servicepolicy.acct.HAcctServicePoilcyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 18: com.cmp.mysm.hibernate.servicepolicy.dynauth.HDynAuthServicePoilcyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 19: com.cmp.mysm.hibernate.servermgr.server.HServerDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 20: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 21: com.cmp.mysm.hibernate.servermgr.plugin.HPluginDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 22: com.cmp.mysm.hibernate.rm.ippool.HIPPoolDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 23: com.cmp.mysm.hibernate.servermgr.eap.HEAPConfigDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 24: com.cmp.mysm.hibernate.servermgr.alert.HAlertListenerDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 25: com.cmp.mysm.hibernate.servermgr.gracepolicy.HGracePolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 26: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 27: com.cmp.mysm.hibernate.radius.dictionary.HDictionaryDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 28: com.cmp.mysm.hibernate.radius.policies.accesspolicy.HAccessPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 29: com.cmp.mysm.hibernate.radius.policies.radiuspolicy.HRadiusPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 30: com.cmp.mysm.hibernate.radius.radtest.HRadiusTestDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 31: com.cmp.mysm.hibernate.radius.bwlist.HBWListBLManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 32: com.cmp.mysm.hibernate.rm.concurrentloginpolicy.HConcurrentLoginPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 33: com.cmp.mysm.hibernate.wsconfig.HWebServiceConfigDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 34: com.cmp.mysm.hibernate.diameter.dictionary.HDictionaryDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 35: com.cmp.mysm.hibernate.servicepolicy.diameter.naspolicy.HDiameterNASPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 36: com.cmp.mysm.hibernate.servicepolicy.diameter.creditcontrolpolicy.HCreditControlPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 37: com.cmp.mysm.hibernate.servicepolicy.diameter.eappolicy.HEAPPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 38: com.cmp.mysm.hibernate.servermgr.drivers.HDiameterDriverDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 39: com.cmp.mysm.hibernate.servermgr.transmapconf.HTranslationMappingConfDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 40: com.cmp.mysm.hibernate.diameter.diameterpolicy.HDiameterPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 41: com.cmp.mysm.hibernate.servicepolicy.rm.cgpolicy.HCGPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 42: com.cmp.mysm.hibernate.reports.userstat.HUserStatisticsDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 43: com.cmp.mysm.hibernate.diameter.routingconf.HDiameterRoutingConfDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 44: com.cmp.mysm.hibernate.diameter.diameterpeerprofile.HDiameterPeerProfileDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 45: com.cmp.mysm.hibernate.diameter.diameterpeer.HDiameterPeerDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 46: com.cmp.mysm.hibernate.core.base.HGenericDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
    [May 13, 2013 12:48:24] [INFO] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: Data Manager was initialized successfully.
    [May 13, 2013 12:48:29] [ERROR] [0.0.0.0] - unknown [CONFIG MANAGER]: error during the Configuration Manager operation, reason: failed to open the connection
    [May 13, 2013 12:48:29] [TRACE] [0.0.0.0] - unknown [CONFIG MANAGER] com.cmp.mysm.datamanager.DataManagerException: failed to open the connection
    at com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager.getList (HSystemParameterDataManager.java:45)
    at com.cmp.mysm.blmanager.core.system.systemparameter.SystemParameterBLManager.getList (SystemParameterBLManager.java:71)
    at com.cmp.mysm.web.core.system.cache.ConfigManager.init (ConfigManager.java:47)
    at com.cmp.mysm.web.core.system.servlet.myServlet.init (myServlet.java:27)
    at javax.servlet.GenericServlet.init(GenericServlet.java:212)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1206)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1026)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4421)
    at org.apache.catalina.core.StandardContext.start(StandardContext.java:4734)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
    at org.apache.catalina.core.StandardHost.start(StandardHost.java:840)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
    at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:463)
    at org.apache.catalina.core.StandardService.start(StandardService.java:525)
    at org.apache.catalina.core.StandardServer.start(StandardServer.java:754)
    at org.apache.catalina.startup.Catalina.start(Catalina.java:595)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289)
    at org.apache.catalina.startup.Bootstrap.main (Bootstrap.java:414)
    Caused by: org.hibernate.exception.GenericJDBCException: failed to open the connection
    at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:140)
    at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:128)
    at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
    at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:52)
    at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:449)
    at org.hibernate.jdbc.ConnectionManager.getConnection(ConnectionManager.java:167)
    at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
    at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1596)
    at org.hibernate.loader.Loader.doQuery(Loader.java:717)
    at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:270)
    at org.hibernate.loader.Loader.doList(Loader.java:2294)
    at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2172)
    at org.hibernate.loader.Loader.list(Loader.java:2167)
    at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:119)
    at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1706)
    at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:347)
    at com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager.getList (HSystemParameterDataManager.java:43)
    ... 21 more
    Caused by: java.sql.SQLException: an attempt by a client to fund a connection has expired.
    at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:106)
    at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:65)
    at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:527)
    at com.mchange.v2.c3p0.impl.AbstractPoolBackedDataSource.getConnection(AbstractPoolBackedDataSource.java:128)
    at org.hibernate.connection.C3P0ConnectionProvider.getConnection(C3P0ConnectionProvider.java:78)
    at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:446)
    ... more than 33
    Caused by: com.mchange.v2.resourcepool.TimeoutException: a client has expired while waiting to acquire a resource of com.mchange.v2.resourcepool.BasicResourcePool@47503458--timeout to awaitAvailable()
    at com.mchange.v2.resourcepool.BasicResourcePool.awaitAvailable(BasicResourcePool.java:1317)
    at com.mchange.v2.resourcepool.BasicResourcePool.prelimCheckoutResource(BasicResourcePool.java:557)
    at com.mchange.v2.resourcepool.BasicResourcePool.checkoutResource(BasicResourcePool.java:477)
    at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:525)
    ... 36 more

    May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDescriptor
    NEWS: Deployment descriptor configuration host - manager .xml
    May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDescriptor
    NEWS: Deployment configuration descriptor manager.xml
    May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
    NEWS: Deployment of the directory docs web application
    May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Examples of Directory deployment web application
    May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploy the web application ROOT directory
    May 13, 2013 org.apache.coyote.http11.Http11Protocol start 12:48:29 AM
    INFO: From Coyote HTTP/1.1 on http-8080
    May 13, 2013 12:48:30 AM org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:8009
    May 13, 2013 12:48:30 hours departure from org.apache.jk.server.JkMain
    INFO: Jk running ID = time 0 = 0/15 config = null
    May 13, 2013 12:48:30 hours departure from org.apache.catalina.startup.Catalina
    INFO: Starting the server in 16222 ms

    Some time Tomcat to connect to the database*.
    [May 13, 2013 10:02:29] [INFO] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: init() Called.
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: adding the data manager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 1: com.cmp.mysm.hibernate.core.system.staff.HStaffDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 2: com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 3: com.cmp.mysm.hibernate.core.system.profilemanagement.HProfileDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 4: com.cmp.mysm.hibernate.core.system.accessgroup.HAccessGroupDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 5: com.cmp.mysm.hibernate.systemaudit.HSystemAuditDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 6: com.cmp.mysm.hibernate.datasource.database.HDatabaseDSDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 7: com.cmp.mysm.hibernate.datasource.ldap.HLDAPDatasourceDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 8: com.cmp.mysm.hibernate.sessionmanager.HSessionManagerDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 9: com.cmp.mysm.hibernate.sessionmanager.HASMDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 10: com.cmp.mysm.hibernate.digestconf.HDigestConfDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 11: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 12: com.cmp.mysm.hibernate.externalsystem.HExternalSystemInterfaceDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 13: com.cmp.mysm.hibernate.servermgr.drivers.HDriverDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 14: com.cmp.mysm.hibernate.servermgr.drivers.subscriberprofile.database.HDatabaseSubscriberProfileDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 15: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 16: com.cmp.mysm.hibernate.servicepolicy.auth.HAuthServicePoilcyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 17: com.cmp.mysm.hibernate.servicepolicy.acct.HAcctServicePoilcyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 18: com.cmp.mysm.hibernate.servicepolicy.dynauth.HDynAuthServicePoilcyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 19: com.cmp.mysm.hibernate.servermgr.server.HServerDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 20: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 21: com.cmp.mysm.hibernate.servermgr.plugin.HPluginDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 22: com.cmp.mysm.hibernate.rm.ippool.HIPPoolDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 23: com.cmp.mysm.hibernate.servermgr.eap.HEAPConfigDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 24: com.cmp.mysm.hibernate.servermgr.alert.HAlertListenerDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 25: com.cmp.mysm.hibernate.servermgr.gracepolicy.HGracePolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 26: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 27: com.cmp.mysm.hibernate.radius.dictionary.HDictionaryDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 28: com.cmp.mysm.hibernate.radius.policies.accesspolicy.HAccessPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 29: com.cmp.mysm.hibernate.radius.policies.radiuspolicy.HRadiusPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 30: com.cmp.mysm.hibernate.radius.radtest.HRadiusTestDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 31: com.cmp.mysm.hibernate.radius.bwlist.HBWListBLManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 32: com.cmp.mysm.hibernate.rm.concurrentloginpolicy.HConcurrentLoginPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 33: com.cmp.mysm.hibernate.wsconfig.HWebServiceConfigDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 34: com.cmp.mysm.hibernate.diameter.dictionary.HDictionaryDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 35: com.cmp.mysm.hibernate.servicepolicy.diameter.naspolicy.HDiameterNASPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 36: com.cmp.mysm.hibernate.servicepolicy.diameter.creditcontrolpolicy.HCreditControlPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 37: com.cmp.mysm.hibernate.servicepolicy.diameter.eappolicy.HEAPPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 38: com.cmp.mysm.hibernate.servermgr.drivers.HDiameterDriverDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 39: com.cmp.mysm.hibernate.servermgr.transmapconf.HTranslationMappingConfDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 40: com.cmp.mysm.hibernate.diameter.diameterpolicy.HDiameterPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 41: com.cmp.mysm.hibernate.servicepolicy.rm.cgpolicy.HCGPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 42: com.cmp.mysm.hibernate.reports.userstat.HUserStatisticsDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 43: com.cmp.mysm.hibernate.diameter.routingconf.HDiameterRoutingConfDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 44: com.cmp.mysm.hibernate.diameter.diameterpeerprofile.HDiameterPeerProfileDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 45: com.cmp.mysm.hibernate.diameter.diameterpeer.HDiameterPeerDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 46: com.cmp.mysm.hibernate.core.base.HGenericDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
    [May 13, 2013 10:02:29] [INFO] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: Data Manager was initialized successfully.
    In data manager: 1
    In data manager: 2
    In data manager: 19
    In data manager: 20
    In data manager: 21
    In data manager: 22
    In data manager: 23
    In data manager: 24
    In data manager: 3
    In data manager: 4
    May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDescriptor
    NEWS: Deployment configuration descriptor manager.xml
    May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDescriptor
    NEWS: Deployment descriptor configuration host - manager .xml
    May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
    NEWS: Deployment of the directory docs web application
    May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploy the web application ROOT directory
    May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Examples of Directory deployment web application
    10:02:30 org.apache.coyote.http11.Http11Protocol start may 13, 2013
    INFO: From Coyote HTTP/1.1 on http-8080
    May 13, 2013 10:02:30 org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:8009
    Org.apache.jk.server.JkMain 10:02:30 starting May 13, 2013
    INFO: Jk running ID = time 0 = 0/14 config = null
    Org.apache.catalina.startup.Catalina 10:02:30 starting May 13, 2013
    INFO: 6176 SP server startup


    But even once, when we try to stop and start then same problem occurred that we are not able to connect to the database

    Thanks in advanace

    We had solved the problem of our self
    to disable the setting of listener_network

    We also increase the connection timeout on the demand side

  • Sun Solaris 5.10 - SSH 1.1.3 - Not able to connect to the server by ssh - Urgent

    Hello
    I am not able to coonect to a server by using the code below.

    If I try the same code on the server to connect it self, it works well. But when I try to connect to another server gives the error below. And I use the IBM Jdk when getting this error. Y at - it a setting to avoid this error.

    Error:
    INFO: Add /usr/jdk/instances/jdk1.6.0/jre/lib/ext/sunpkcs11.jar to the CLASSPATH of the extension
    ConfigurationLoader
    November 30, 2010 16:33:12 < clinit > com.sshtools.j2ssh.transport.publickey.SshKeyPairFactory
    INFO: Loading public key algorithms
    Error so that SFTP
    java.util.NoSuchElementException
    at java.util.StringTokenizer.nextToken(StringTokenizer.java:332)
    at java.util.StringTokenizer.nextElement(StringTokenizer.java:390)
    to com.sshtools.j2ssh.transport.AbstractKnownHostsKeyVerification. < init >(Unknown Source)
    to com.sshtools.j2ssh.transport.ConsoleKnownHostsKeyVerification. < init >(Unknown Source)
    at com.sshtools.j2ssh.SshClient.connect (unknown Source)
    at fileTransfer.connectToServer(fileTransfer.java:18)
    at fileTransfer.main(fileTransfer.java:56)



    Code:
    public static boolean connectToServer (String serverIp, int serverPort, String userId, String password)
    {
    SFC SshClient = null;
    try {}
    System.out.println ("inside the Try to like his SFTP");
    ConfigurationLoader.initialize (false);
    System.out.println ("ConfigurationLoader");

    SFC = new SshClient();
    SFC. Connect (Ipserver, serverPort);
    System.out.println ("SFC. Connect");

    PasswordAuthenticationClient pwd = new PasswordAuthenticationClient();

    pwd.setUsername (userId);

    pwd.setPassword (password);

    int checkAuth = sfc.authenticate (pwd);
    System.out.println ("checkAuth" + checkAuth);

    If (checkAuth == 4) {}
    System.out.println ("AuthenticationProtocolState.Complete");

    SFTP SftpClient = sfc.openSftpClient ();
    sftp.Quit ();
    SFC. Disconnect();
    }
    on the other
    {
    throw new Exception ("invalid user name or password for the user");
    }
    }
    catch (System.Exception e)
    {
    System.out.println ("Error While SFTP");
    SFC. Disconnect();
    e.getStackTrace ();
    Returns false;
    }
    Returns true;
    }

    Swapped

    Sun Solaris 5.10 - SSH 1.1.3 - Not able to connect to the server by ssh - Urgent

    @O.P.
    Don't, don't.
    In the future, to choose the most appropriate forum and make your post.
    Swap shall be the same as the rude spamming.
    I'm not aware of any web-site-of-value forum that would promote the permutation in its directions on the label.

    ... and for what is "Urgent"?
    This web site is for the end-user community gather and discuss various topics in general conversations. Your time constraints are irrelevant. If you need real support for something, then log a support case and pay for a quick response.

    See the FAQ in the link at the top of the page.

  • Not able to connect to the server with modem 56 k

    I try to connect my Tecra via modem 56 k Internet.
    Also, I tried with another computer laptop with the same details and that worked.
    But when I try it on my Tecra I get an error that is not able to connect to the server.

    So I think that it is a parameter that is not defined correctly for the modem.
    (If you compare it to another laptop all parameters are the same as windows).

    Thanks in advance,

    Theo

    Hello Theo

    Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

    After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

  • not able to connect to the game of google on mobile data store

    I bought gold x 2 lenovo 32 GB vibe.

    in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

    Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

    and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

    Please give the solution.


  • Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

    Original title: Win32/Sirefef.DAtrojan

    Recently, I got the following virus. Win32/Sirefef.DAtrojan

    I was not able to connect to the internet since then.
    Y at - there someone who can help me with the connection to the internet?
    I have a Dell XPS600
    Microsoft XP Professional

    Hello

     
    1. what happens when you try to connect to the internet?
    2 - is confined to the browser Internet Explorer problem?
     
     
    I suggest you perform a full scan of the system.
    Here is a link that will give you know how
     
     
    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • Im not able to connect to the internet?

    Im not able to connect to the internet and the message that reeds "the instruction at"0x00bb707c"referenced memory at 0x1ab4a07 memory could not writen

    Hello

    1. don't you make changes to your computer before the problem?

    I suggest that you follow these steps and check if the problem persists.

    Step 1:

    Test the issue in safe mode with network.

    Step 2:

    If it works fine in safe mode with network, turn on your computer in a clean boot State and check if the problem persists.

    Note: Don't forget to restart your computer as usual.

  • I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

    Connection to the local network - properties dialog box

    Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

    Hello Rajaneer,

    Is the computer that you are using a personal computer or a work computer?
    You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:

  • Not able to connect to the user account, error: user profile Service has no logon

    I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

    Where and how can I fix it?

    Thank you.

    Larry

    Original title: need help with setting up an account

    Hi Larry,
    Thanks for posting your query in Microsoft Community.

    From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

    This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

    If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

    To resolve the problem with the user account, you can follow these steps:
    Method 1:
    (a) click Start, type regedit in the start search box, and then press ENTER.
    (b) search for, and then expand the following registry subkey:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

    (c) right click the SID that you want to remove, and then click on remove.
    (d) log on to the computer and create a new profile.
    You can also check this link:
    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Method 2: Also, see the steps in the following Microsoft article:

    (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

    If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

    (b) how to back up and restore the registry in Windows
    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    For any Windows help in the future, feel free to contact us and we will be happy to help you.

  • I am not able to connect to the links in the emails that I receive. When I click on a link highlighted blue, I get a box that says, "this operation has been cancelled due to restrictions in effect on this computer"

    I am not able to connect to the links in the emails that I receive. When I click on a link highlighted blue, I get a box that says, "this operation has been cancelled due to restrictions in effect on this computer"

    Maybe this?

    http://support.Microsoft.com/kb/310049

    Assuming you are using Outlook, which you failed to mention

    Thank you very much, it worked! Yes, I use Outlook, sorry I mentioned not just but good guess. Thank you very much for the help.

  • Not able to connect to the homegroup, it requires username and password

    Original title: h/group connection on my year old d/top & my l/top 6 months, does not. Says I need a/c p/word-WHERE is it? I need to change the system time that is differs from earlier local. - thank you - Stantheman

    Both computers are windows 7. Recently uploaded photo gallery on both, but because they won't talk to each other, I have to copy / paste from one to the other...

    I'm 79 and reasonable computer. Daughter 51 tried very hard, but without success.

    Hi Stanley,

    Welcome to the Microsoft community. As you are not able to connect to the Homegroup, answering a question that helps us provide the best solution:

    What antivirus software do you use?

    Here are a few steps to try:

    Visit the link to check if the homegroup settings is set correctly:

    Homegroup from start to finish
    http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

    Method 1:
    Visit the link and try the troubleshooter.
    Open the homegroup troubleshooting utility
    http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

    Method 2:

    Visit the link to learn more ways to connect to the Homegroup.

    Why I can't join a homegroup?
    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

    Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

Maybe you are looking for

  • CMD31T - 100NAS solid light of amber we 1/2 on

    On my Modem CMD31T today I discovered the United States, DS and online lights orange. By resetting the modem by hitting the reset button and power off for 30 seconds - light ONLINE, turned green, as well as the lights of the DS. However, in the Unite

  • All hard drive data removal/cleaning

    I just bought Windows7 Recocery hp discs. The hard drive should be cleaned of all data etc. before installing recovery disks. Computer is a HP PAVILION dv7-3160us ENTERTAINMENT NOTEBOOK

  • Several tables to excel file

    Hello I get this error when writing two different tables for the same excel file. I think the problem is that the excel file must be closed to be written the new. But I am unable to use the narrow leader because he is not a refnum. Should I use the n

  • 5 GHz wifi card replacement for dv7-6c23cl (AMD A8)?

    Laptop came with Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n.  It has adaptor bluetooth Broadcom 20702. Don't know if its construction in to the wifi card. I would like a better card dual band. I have WNDR3000 Netgear dual band router. This ada

  • Los metadata appears in web e.

    Buenas tardes, tengo problema, also appears los las propiedades page metadata rotura puntos.  Appears in the medio del Diseño web.   No to como solucionarlo.Por cierto website the of are http://pepylobillo.com