PowerConnect 5524P - additional name in the certificate

Similar Questions

• Cloud SCORM learning name for the certificate of recovery

  Salvation;

  I tried to retrieve the name of the learner to LMS to create the training certificate; I added a function for the "cmi.learner_name" in scorm_support.js; called this a slide settings Java script onload function, but it returned 0.

  When I studied by registration of the SandBox in Scorm cloud for training; It shows the cmi.learner_name variable, and its value is defined as the registered name. in the debug log report. It is said

  + [07:46:28.414] ('cmi.learner_name') LMSGetValue returned "in 0.001 seconds

  [07:46:28.414] CheckForGetValueError (cmi.learner_name, cmi.learner_name),

  [07:46:28.415] SCORM ERROR FOUND - Set error status: 201 - the parameter 'cmi.learner_name' is not recognized.

  so the function has been called correctly from the Captivate and scorm_support.js but has not answered correctly by Scorm cloud;

  Any help on this is appreciated;

  Sandbox registration State:

  Static data

  • CMI.completion_threshold:
  • CMI.launch_data:
  • CMI.learner_id: [email protected]
  • CMI.learner_name: Najeeb Haider
  • CMI.max_time_allowed: 0001:00:00
  • CMI.scaled_passing_score: 80
  • CMI.time_limit_action: ExitMessage

  Debug log:

  [07:41:53.659] preliminary assessment of activity Course_ID1_ORG start

  [07:41:53.660] preliminary assessment of activity Course_ID1_ORG start

  [07:41:53.660] preliminary assessment of activity SCO_ID1 start

  + [07:43:30.307] LMSInitialize ("") returns "true" in 0.001 seconds

  + [07:43:30.311] LMSGetValue('cmi.core.lesson_status') returned "not attempted" to 0.002 seconds

  + [07:43:30.313] LMSSetValue ('cmi.core.lesson_status', 'incomplete') returns 'true' to 0.004 seconds

  [07:43:30.468] preliminary assessment of activity Course_ID1_ORG start

  [07:43:30.468] preliminary assessment of activity Course_ID1_ORG start

  [07:43:30.468] preliminary assessment of activity SCO_ID1 start

  + [07:43:30.533] ('cmi.core.lesson_location') LMSGetValue returned "in 0.001 seconds

  + [07:43:30.567] LMSGetValue ('cmi.core._children') returned "student_id, student_name, lesson_location, credit, lesson_status, entry, total_time, lesson_mod e, exit, session_time, note" in 0 seconds

  + [07:43:30.600] ('cmi.suspend_data') LMSGetValue returned "in 0.001 seconds

  + [07:43:30.633] LMSGetValue ('cmi.interactions._children') returned "id, objectives, duration, type, correct_responses, weight, student_response, result, latency" in 0 seconds

  + [07:43:30.667] LMSGetValue ('cmi.interactions._count') returns '0' in 0.001 seconds

  + [07:43:30.700] ('cmi.launch_data') LMSGetValue returned "in 0 seconds

  + [07:43:30.738] ('cmi.objectives._count') LMSGetValue returned '0' to 0 seconds

  + [07:43:30.767] ('cmi.core.lesson_location') LMSGetValue returned "in 0 seconds

  + [07:43:30.800] LMSGetValue('cmi.core.score._children') returned "raw, min, max" in 0 seconds

  + [07:43:30.843] ('cmi.core.score.raw') LMSGetValue returned "in 0.002 seconds

  + [07:43:30.867] ('cmi.core.score.min') LMSGetValue returned "in 0 seconds

  + [07:43:30.900] ('cmi.core.score.max') LMSGetValue returned "in 0 seconds

  [07:43:30.900] CheckForGetValueError (cmi.core.score.max, cmi.core.score.max),

  [07:43:30.900] call is error-free.

  [07:43:30.900] RetrieveGetValueData (cmi.core.score.max, cmi.core.score.max),

  [07:43:30.900] element is: score.max

  + [07:44:27.276] LMSCommit ("") returns "true" in 0.001 seconds

  + [07:44:30.264] LMSCommit ("") returns "true" in 0 seconds

  + [07:46:28.358] LMSCommit ("") returns "true" in 0.001 seconds

  + [07:46:28.414] ('cmi.learner_name') LMSGetValue returned "in 0.001 seconds

  [07:46:28.414] CheckForGetValueError (cmi.learner_name, cmi.learner_name),

  [07:46:28.415] SCORM ERROR FOUND - Set error status: 201 - the parameter 'cmi.learner_name' is not recognized.

  + [07:46:28.418] ('cmi.learner_id') LMSGetValue returned "in 0 seconds

  [07:46:28.418] CheckForGetValueError (cmi.learner_id, cmi.learner_id),

  [07:46:28.418] SCORM ERROR FOUND - Set error status: 201 - the parameter 'cmi.learner_id' is not recognized.

  + [07:46:50.82] LMSSetValue ('cmi.interactions.0.id', '179008') returns 'true' in 0.007 seconds

  + [07:46:50.132] LMSSetValue ('cmi.interactions.0.time', ' 07: 46:50') returns 'true' in 0.001 seconds

  + [07:46:50.164] LMSSetValue ('cmi.interactions.0.type', 'choice') returns 'true' in 0.001 seconds

  + [07:46:50.197] LMSSetValue ('cmi.interactions.0.correct_responses.0.pattern', 'A') returns 'true' in 0.001 seconds

  + [07:46:50.233] LMSSetValue ('cmi.interactions.0.weighting', 10') returns 'true' in 0 seconds

  + [07:46:50.264] LMSSetValue ('cmi.interactions.0.student_response', 'A') returns 'true' in 0 seconds

  SCORM1.2 has two variables identified for the name of the learner and the ID and were not what I spent. I've corrected and he started to work very well;

  For future reference;

  in scorm_support.js write the following function

  function scorm_get (cmivalue, whichval) {}

  Get the name of SCORM 1.2

  var Val = g_objAPI.LMSGetValue (cmivalue);

  Send the name of Captivate via ExternalInterface

  document.getElementById("Captivate").cpEISetValue (whichval,

  Val);

  }

  Now you can call any parameter of LMS via the next statement to execute Javascript' action to any of the user variable.

  scorm_get ('SCORM Variable', 'Captivate User Variable');

  List of Scorm variables are available in the reference of RTE; It is found at the following link

  http://SCORM.com/SCORM-explained/technical-SCORM/run-time/run-time-reference/

  Once you have called the data in the variable. You can use the variable in the text box between signs such as $ $$ $VariableName$ $ to show the value you want.

  references;

  https://groups.Google.com/Forum/#! 2VuQ6XJoJ msg/e-Learning-technology-and-development/BWfJkUzTv9k / 18 X

  http://SCORM.com/SCORM-explained/technical-SCORM/run-time/run-time-reference/

• text in the input box of text on the certificate not printing

  I put a box of text on the certificate at the end of the questionnaire so that the customer can enter their name on the certificate, but when it comes to print the name will not be printed. What I am wromg please?

  Hi Varun,

  It's Captivate 6.0.1.240, I used one of the models of widget and I was using the print option that came automatically just below the certificate.

  In fact, there are other issues also. It's like interactive elements and the extra bits, which I have added do come through.

  Is it possible for me to insert a couple of pdf to show you the problem?

  Thank you

  Oonagh

• where to save the files under options the file name is duplicated how to remove an additional folder with the same name

  Under Options in Firefox, I clicked on save the files under downloads, but the file name twice and an additional file with the same name is created in the folder, i.e.:

  G:\Akbar's Songs\HAMARA DOWNLOADS\HAMARA FORUMS DOWNLOADS FORUMS

  As you can see the file repeats, how can I fix it?

  Also the music files, I download from a site of downloads as a WinRar file and I need to open it. Y at - it an option where the file opens automatically in the folder I chose?

  Thanks a lot for your help.

  Hi Akush, when you install 7 - zip, make itself the default application to open .zip and .rar files. So if you double click on the .rar file, it should open in 7 - zip. If you prefer to decompress immediately, right click the file and look for new 7 - zip items in the menu. I can't think of a way to do this automatically, however.

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• Certificate error "the name on the security certificate is invalid or does not match the site name.

  When my computer after starting the antivirus and Skype loaded,.

  I recently started to get warning of security box appear. The attachments show you what I see.

  I am told "the name on the security certificate is invalid or does not match the name of the site"

  Whether I click Yes to "do you want to proceed", nothing happens.

  How to make this security alert disappear from the start-up procedure?

  Thanks for your advice

  Marty783

  

  Thank you PML

  Problem is now solved.
  Was a corrupted version of IE6, which, when updated to IE8, fixed the problem.

• Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

  Prob Winmail.

  Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

  Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

  Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

  Steve

• How can I know the FULL domain name & names for the installation of a digital certificate Public in ISE?

  We are implemented a project with Cisco ISE; but comments Portal appears to users as a "untrusted site". For problems, a public digital certificate must be installed in Cisco ISE, so he can send it to users who enter the comments Web portal.

  Now... to sell me the certificate, VERISIGN needs to know settings ISE of the certificate, such as name of area COMPLETE, names subnames, etc... How can these parameters of ISE?

  Thaks a lot!

  This isn't an easy question to answer, there are a ton of variables to include

  Local web site Central Web Auth or Auth

  LWA, the WLC is the "man in the Middle" to the request of the customer for PSN (server nodes), the WLC takes the request webauth and resembles webauth then the redirect URL that you put in the WLC

  If the redirect webauth URL is https://ise01.mycompany.com:8443/guestportal/login.action, the WLC is a redirect but the virtual IP address comes in 1.1.1.1, who was as trustworthy or redirection complains, then you may have to get the public certificate for the fqdn of 1.1.1.1, and the comment server. You can create a CSR using openssl or you can just enter in ISE and create a CSR, but you can only set CN = ise01.mycompany.com and nothing else, as long you have a single NHP is good, but if you have several Ssnp, you need to change your CSR so that you have to use openssl to create CSR using a file openssl.cnf and then with openssl, you do the following:

  openssl req - new - nodes-out openssl.cnf omf-01 - ise04.csr - config

  You must do it the way I said above regardless of CWA or LWA, if you have more than one PSN, you must point to a FULL VIP domain name and then configure your DNS to answer for these host names. With LWA, you get virtual IP WLC involved 1.1.1.1, so you don't have to worry about getting a certificate for this, it is a cleaner installation, but you must always do all the rest. It must ensure that users of your guests have the opportunity to join the portal comments and be able to solve the given DNS the dns server that they have been configured with.

  Content of the file openssl.cnf:

  [req]
  nom_distinctif = req_distinguished_name
  req_extensions = v3_req
  default_bits = 2048

  [req_distinguished_name]
  countryName = name of the country (2-letter codes)
  countryName_default = en
  localityName = name of the locality (for example, City)
  organizationalUnitName = organizational unit name (for example, section)
  commonName = Common Name (eg, YOUR name)
  commonName_max = 64
  emailAddress = Email address
  emailAddress_max = 40

  [v3_req]
  keyUsage = keyEncipherment, dataEncipherment
  extendedKeyUsage = AutClient, serverAuth
  subjectAltName = @alt_names

  [alt_names]
  DNS.1 = guest.mycompany.com
  DNS.2 = guest.mycompany.com
  DNS.3 = ise01.mycompany.com

• Then the specified mail server host name differs from the certificate CN

  My BIEE installation is 11.1.1.7 and SMTP server configured in EM. I put the root CA for SSL certificate file.

  He calls the error message "then hostname specified mail server differs from the certificate CN", when agent is running.

  The SMTP certificate common name is "pop.mydomain.com", and the hostname of the SMTP protocol is "SMTP.mondomaine.com". If the names are different, it works fine with Outlook and other email clients.

  All the solutions to fix it?

  You are right. For the security certificate should be identical to the host. But the smtp server is not placed under the responsibility of us. I modified the file hosts as a workaround. I can't find any biee configuration option to ignore the incompatibility.

• How can I get a name to fill in the certificate Widget?

  Hello

  I am using Captivate 5.5.  I am trying to use the certificate Widget which I shot in my project.  How can I get a user name in the first line?  I'll use a text input field to ask the name and is the name that I want to print on the certificate.

  Also, I'm passing the assessment with a score of 100%, but on the certificate, it says 0% and in case of failure.

  Any help would be greatly appreciated.

  Thank you

  Hello

  To use this widget, do the following:

  • Insert a minimum of drag a question.
  • Insert a blank slide after the landslide results.
  • Insert the CertificateWidget.swf file from the Widget Panel in the slide inserted.
  • Choose a model and fill in information, for example, the name of the course, duration of the course and the signature.

  When users take the quiz, a slide with a text for the username input box appears after the landslide result. Users type their name in the box and click on submit to display the certificate. The certificate is then filled with the user name and other settings that you chose during the insertion of the widget.

• Windows media player artists name has additional symbol at the end

  In Windows Media Player, a little square symbol follows the name of the artist on some of the entries.  I try to remove it and it comes back.  This translates to a separate artist for a few songs in the same album.  Also, if I try to display songs from the artist, I get 8 different versions / inscriptions of the artist with the symbol of the square after the name, rather than an inscription by the artist with all his songs.

  Is there a way to fix this?

  Hi Robs_3415,

  You can see the article mentioned and check if the problem still persists.

   

  Add or edit media information

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/album-info

   

  Note: Make sure that you restart Windows Media Player to influence change.

  I hope this helps.

• How to decrypt previously encrypted files when the certificate is lost

  I've already posted a question and received a response. I would now like to make additional comments on what I said in my previous question. Maybe I used the wrong term and said "my computer crashed." In fact the computer has successfully started as always, so I restarted for some reason, but this time, he was able to start, displaying "NTLDR is missing". Press CTR + ALT + DEL is not started the computer. I have do not reformat the hard disk, but simply to insert the CD of the OS to set up the operating system on the existing system. As part of the implementation, I did inadvertently in my name, when asked "who uses this computer" so I became a Director. In the previous original set-up the built-in administrator is the only Director; my name appeared as a user. Now when I check the local users in the Computer Management Console the built-in Administrator, the only Admin previously, and myself ERHAN KARABEKIR are displayed as properties for each user and users lists each of the two as a member of administrators. I want to come is I think I hope the previous built-in administrator could somehow be recovered. Am I too optimistic? Today, I disconnected to switch users, hoping that the built-in administrator would appear as a user so that I could open a session to be able to decrypt the files and folders encrypted. Unfortunately, he did not show I've been to ERHAN KARABEKIR, my present administrator account. Previously, the administrator displayed in users in the Panel was 'Administrator' and the guest account, without any name. I bought the computer with an operating system already installed. Now, my name is displayed as "administrator of the computer. Sorry for the long explanation.

  If you are lucky enough to make the administrator account is the original account whose profile includes the certificate required to access the encrypted files, then simply connect to your computer as 'administrator '.  You will not be able to see the administrator account on the logon screen if you have created another account.  To connect as an administrator, when you get to the login screen, hit Ctrl-Alt-Del twice.  You can then type "Admin" in user space and the password in the password space and log in as an administrator.

  Good luck
  JW

• Domain name of ISE, certificates and portal comments

  Hello world

  We have a deployment ISE using our internal domain for its FULL domain name (example: ise01.private.local). Now, we want to use for authentication of access as a guest and have noticed that the default redirect URL uses the FULL of the ISE Server domain name.

  It works very well for our business machines that we have our own generated certificates and internal certification authority. As we don't want a certificate, that the errors that occur for our clients, we need to use a public domain FULL name.

  Are we better off by changing the domain name used by the servers of the ISE, or is it possible to change the redirect URL to use a custom domain?

  I've heard suggestions that change the domain name is not supported, but I can't find another way.

  Thank you
  Mark

  Mark,

  You already have a public domain FULL name pointing to your ISE?  If so, let's assume that you authenticate you if you use a CWA.  First creat a new profile authorization, under common tasks, select redirect Web (CWA, DRW, MDM, DK, RPC), choose the authentication method (in this case, CWA) and set the ACL to use.  Just below, select the name of the static host/IP and enter the COMPLETE public domain name that points to your ISE.

  

  From there, you can create a permission policy to reference the profile that you just created.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• Alternative name of the ise 1.3 Cisco SAN object

  Hi, who can help me to understand san on Ise 1.3.

  You want to access Web pages of the ISE by different names. My devices or the sponsor-Portal is a good example for this. To access by the native name of one of your ISEs would be friendly to your users. If they can access this asmydevices.example.net and sponsorportal.example.net, it is easier for users. But to not get a cert warning, you must have all the additional names added to the certificate. These are the "other names of the subject' or without. Another method to achieve the same is to use a certificate with wildcards.

• Replace the certificate self-signed prominent 5.3

  Select a certificate:

  1 Subject: C = US, S = CA, L = CA, O = VMware Inc., unit of ORGANIZATION = VMware Inc., CN = VVVDCVDID03, [email protected]
  Valid from: 31/12/2013-15:56:35
  Valid until the: 31/12/2015-15:56:35
  Footprint: E93EDE1797C55BC61E95DF625AC33EC8D30DD089

  2 object: CN = .net, OR default certificate of VMware View = VVVDCVDID03.mydomain, O = "VMware, Inc.."
  Valid from: 12/30/2013 15:24:20
  Valid until the: 28/12/2023-15:24:20
  Footprint: 671E847CA3A55FC31AA62034174B29EC37D4DF38

  3 object: CN = * .mydomain .net, O is my company Holdings LLC, L = Grant Park, S = Illinois, C = US
  Valid from: 01/08/2014-19:00
  Valid until the: 14/01/2015-07:00
  Footprint: 1D976E97E9B9C55A02470F45618F7E2CD8763B43

  Enter the choice (0-3, 0 to abort): 3
  Remove the link to certificate successfully 18443 port.
  Bind the new certificate to the port.
  ReplaceCertificate successful operation.

  Yet the certificate still shows as invalid and self-signed view Admin and when I join on the site.  It's showing that ranked #2 in the SVICONFIG.

  In addition to this SVICONFIG does not appear to be installed facing the connection to the server at the point 5.3. Or at least I can't.  5.3 documents do not appear to exist. 5.2 only.

  How can I replace the self-signed certificate in my servers connection and security now?

  http://pubs.VMware.com/view-51/index.jsp?topic=%2Fcom.VMware.view.installation.doc%2FGUID-5ED2A8AB-0D5F-495F-B2F7-D7C64C7A021E.html

  http://pubs.VMware.com/view-51/index.jsp?topic=%2Fcom.VMware.view.installation.doc%2FGUID-5ED2A8AB-0D5F-495F-B2F7-D7C64C7A021E.html

  The solution in the end was that the self singing and new cert had the same friendly name of "vrm".  Changed the name of the car to "oldcert" sign and restarted the server connection.  That solved.