PowerConnect 8132 - remote logs Server

Similar Questions

• VPN error 868 the name of the remote access server is not resolved

  I use Windows 7 Home Premium and you want to configure a VPN with my office network that uses the Check Point Safe@Office.  I am unable to log in and get the error that does not resolve the name of the remote access server and Windows cannot find the host using DNS name.  Any suggestions on what to try to fix the problem?  I set up the VPN connection according to the instructions of our network administrator.  We use XP in the office.

  Hello
  Welcome to the Microsoft answers site

  The question that you'd be better suited in the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/ForefrontedgeVPN/threads

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• VirtualCenter Server DBs on remote SQL Server

  Guys,

  I use VirtualCenter Server with a remote server of SQL2005 DB.  I initially set up with a domain account as the owner of the db and everything was pretty much ok, except that my VirtualCenter management Services continues to stop.  I was told that the best practice is to use local sql accounts and authentication as opposed to domain accounts.  I created connections local SQL, makes them owners of DB and then recreated the system DSN names on my server of VC.  I changed the log on credentials for the VC and VC management Web services for my domain account for the Local System account.  Now when I start the service I get the "Virtualcenter Server service stopped with the error service special 2 (0x2).»  I have cheked other messages and I made sure the Vmware converter service does not work.  IIS in is not installed on this server.  I saw the messages about failure fo the local system account to log on to a remote sql server.

  So my question is:

  If the VCDB abd UMDBs are on another SQL Server on the VC server do you need authentication based on the domain or local sql?  What references do service accounts must be defined on the VC Server?

  Thank you

  If VC and SQL reside on a single box, a domain account is recommended. If SQL is remote, it is recommended the SQL authentication, see Installation and Configuration Guide. This has always worked for me.

  As mentioned previously, VC must be installed with local administrator or service account (member of local administrators) and retain the same all along of...

  Thank you

  Ramesh. Giacalone,

  VCP 3 & 4, MCTS(Hyper-V).

  Please give points, so useful

• ORA-17629: unable to connect to the remote database server

  Hello
  
  I have put Dataguard in place with primary and 1 physical standby for learning/test database:
  
  I do NOT plan the unloading of RMAN backups on the physics of the day before.
  
  Recorded the primary database with RMAN and when "resync catalog db_unique_name all;" is issued.
  I get the following error:
  ---------------------------------------------------------------------------------------------------------------------
  RMAN > catalog resync db_unique_name all;
  from full resynchronization of the recovery catalog
  full complete Resync
  resynchronization of data base with DB_UNIQUE_NAME ASTTESTB
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failed to db_unique_name resynchronization command at 28/09/2011 11:34:23
  ORA-17629: unable to connect to the remote database server
  ORA-17628: Oracle 17629 error returned by remote Oracle Server
  ------------------------------------------------------------------------------------------------------------------
  Configuration of RMAN for the main proceedings are the following:
  
  RMAN > show all to db_unique_name asttest;
  
  RMAN settings for database with db_unique_name ASTTEST are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP # by default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  Configuration of RMAN for instance physical standby are:
  
  RMAN > show all to db_unique_name asttestb;
  
  RMAN settings for database with db_unique_name ASTTESTB are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  ----------------------------------------------------------------------------------------------------------------------
  
  When I tested missing missing datafile and control file scenario on the primary database, it worked (Advisor to recover data)
  
  However, missing datafile scenario does not work on the physics of the day before.
  Here are the steps I followed:
  ********************************************
  1 renamed a file of physical data - in standby mode:
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf
  
  bash - $3.2 mv rmandg_data01.dbf rmandg_data01.dbf_old
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf_old
  
  
  2. restore the datafile (find the data file # view v$ recover_file):
  RMAN > restore datafile 5;
  
  
  
  From restoration to 5 October 11
  
  Segmentation fault
  
  
  3. in spite of the error, published "recover datafile command.
  
  4 RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  allocated channel: ORA_DISK_1
  
  channel ORA_DISK_1: SID = 10 type of device = DISK
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:00:40
  
  RMAN-06094: datafile 5 must be restored.
  
  
  5. manually copy the physical primary datafile - in standby mode, & then problem recover RMAN command:
  bash - $3.2 scp oracle@msudrainier:/ora03/oradata/asttest/rmandg_data01.dbf.
  
  rmandg_data01.dbf 100% 50 MB 16.7 MB/s 00:03
  
  bash - $3.2 ls - ltr
  
  Total 159096
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:49 rmandg_data01.dbf_old
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 12:01 rmandg_data01.dbf
  
  
  RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  using channel ORA_DISK_1
  
  
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:01:59
  
  RMAN-06067: RECOVER the DATABASE required with a backup control file or created
  
  
  6. of course RMAN commands have failed to restore the missing data file;
  So I renamed the file to original and rebooted repeat services applies - this restore the data file and now the configuration state of the DG is normal.
  *********************************************************************************
  
  Not quite sure if I'm still he hands the right way or if the error above is related to RMAN not able to synchronize with the physics of the day before.
  
  The documentation I want to talk to is here (1 paragraph):
  
  [http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD | http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD]
  
  
  Any pointers/direction and advise is greatly appreciated.
  
  Best regards
  NK

  I got it!

  /home/oracle:STANDBY >$ORACLE_HOME/bin/rman target sys/ catalog /@rcatalog
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 7 14:12:10 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: PRIMARY (DBID=1562898590, not open)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  resyncing from database with DB_UNIQUE_NAME PRIMARY
  starting full resync of recovery catalog
  RMAN output not resynced for database with DB_UNIQUE_NAME PRIMARY
  full resync complete
  

  If the necessary connection string a target/sys and a catalogue

  RMAN target sys / catalog /@rcatalog

  I did my standby

  Will try the primary

  Best regards

  mseberg

  Work on both. Great question!

  connected to target database: PRIMARY (DBID=1562898590)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  starting full resync of recovery catalog
  full resync complete
  
  resyncing from database with DB_UNIQUE_NAME STANDBY
  RMAN output not resynced for database with DB_UNIQUE_NAME STANDBY
  
  RMAN> 
  

  Published by: mseberg on October 7, 2011 14:16

  Thanks a ton for sticking to it. I'll add this little thing to my web site.

  Published by: mseberg on October 7, 2011 14:22

• Server 2008 R2 Remote Desktop Server printing problems...

  Hello

  We have recently installed a Server 2008 r2 remote desktop server.  Everything works well except sometimes once a user has printed a large number of documents remotely a print job fails.  The only mistake he gives may not print.

  Once this problem starts they then won't even be able to print locally to a printer connected to the server.  The only way to solve the problem is to disconnect and turn it back on.

  We checked to see if the spooler is running, it is not a remote printing problem, that it does not start even local print will work for this user.  We also checked to make sure that the print queue is not an uptight work.

  How we solve this problem?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Failed to connect to remote sql server 2005

  It has problem connecting to remote sql server 2005 on the LAN (windows xp/windows 7). I had put firewall settings as don't port no 1433 for TCP/IP and everything, but does not connect with the computer on the local network

  Hello
   
  Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/

• Try get job PowerConnect 8132 + PowerConnect 8024-k (Switch Blade) and PowerVault md3600i on 9000 MTU

  Try get job PowerConnect 8132 + PowerConnect 8024-k (Switch Blade) and PowerVault md3600i on 9000 MTU

  Everywhere I put 9000 MTU (Jumbo frames)

  My systems host is 2 x M520 with Broadcom 10 G (2 ports) mezz card

  On the 10G card that I am trying to get link iSCSI work with storage, but the work than the MTU 1500

  The M520 installed Linux CentOS 6.4 (where I've implemented the 9000 MTU)

  My scheme is:

  

  Please help :)

  Hello, Daniel.

  Problem solved. It's strange, but all devices have started working after restart 8132 switches. :)

  Thank you for your help.

  Good bye.

• PowerConnect 8132 routed Port

  Good morning/afternoon everyone,

  I come from a world of Cisco, but we decided to buy Dell PowerConnect 8132 because they were cheaper. In Cisco, I can easily make a port on the router, for example:

  interface GigabitEthernet0/2 no switchport ip address 10.3.0.1 255.255.0.0
  

  How do I do that in these switches? I tried searching google, but seemed to have come up with nothing that has helped me. I would assume it'd be something along the lines of:
  

  #> configure(config)#> int tengigabitethernet 1/0/2
  

  (config-if-te1/0/2) # ip address 10.3.0.1 255.255.0.0
  

  However, that Ip address command isn't available under interface for me. The few websites I have found indicated it should.
  

  Any help would be great, thanks!
  

  You are right there is no command on physical interface to set an ip address. When usinh series PowerConnect you put the physical port (te1, 0, 2) mode for certain a switchport VLAN.

  switchport mode access # (config-if-te1/0/2)

  (config-if-te1/0/2) # switchport access vlan xx

  Access the xx interface VLAN, and then enter the required IP address.

  Console (config) #interface vlan xx

  Console (config-if-vlanxx) #ip address 192.168.10.10 255.255.255.0

  VLAN you configure it is the network that extends between the 2 devices which you connect to layer 3.

  Here is a link to the manuals available for the 8100 model.

  I hope this helps.

• How to send IPS events to a Remote Syslog server

  Can someone point me to a doc tech "how to send IPS (v7.x) events to a Remote Syslog server.

  Pls kindly marks the message as answered. Thank you.

• Remote access server problem ASA5510

  Hello guys,.

  I have a problem with ASA5510 configured as a remote access server. We use the client VPN in Windows XP. Look at the requirements I see no problem, but when I try to connect to the server it doesn't open the negotiation of VPN. I had the problem like this before, but at least I saw the traffic hitting the ASA. Now, I don't see anything hitting the device. I enclose the current configuration of the SAA. The VPN client on my laptop is configured correctly. Thank you in advance!

  RVR

  Hello

  Happy to help and thanks for the note.

  This command is not required, but 90% of deployment I've seen has this configured command and is the default value for the SAA. In a Word, what this command is open to IKE and IPSEC ports and also does not check ACL entering ASA for IPSEC traffic.

  In case if you do not have this command enabled, you must configure inbound ACL to allow IKE, IPSEC and text clear remote access VPN traffic after IPSEC packets get decrypted on the SAA.

  Kind regards

  Arul

  * Rate pls if it helps *.

• HP 8600 - Document remains in the spooler after printing from a Remote Desktop server

  I have a printer HP 8600 N911a . The printer prints a document on a Remote Desktop server, but the document will stay on the spool and held until the next documents aligned to print. It does this for all articles printed from the Remote Desktop server. It prints and receives faxes perfectly all the other times wireless.

  Hi swmpthng88,

  It is an indication that the problem is in the server operating system. To be sure, you can connect the printer to a different computer, and you don't have the issue, then, if the operating system on the server on which the problem of the queue. Let me know what you find?

• Remote Desktop RDG cannot have more than one remote gateway server.

  Original title: Remote Desktop RDG

  The app works very well except that you can not have more than one remote gateway server.  I have two different infrastructures that I connect and they have different configurations of RDG.  You cannot change the advanced options when you create a new connection.  You can't modify it until you connect once.  I can not connect because the RDG are for another server.  Check connection options during the installation of the initial connection.

  OK, never mind.  I figured this out.  When you are on the home screen see you the bar charms and select settings.  From there, you can change the default RDG server machines new use.  Exactly what I needed.  Works fine now.

• Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Only a single vCenter Server Heartbeat license is necessary to protect the components of the vCenter Server installed remotely, including SQL Server. A single license is also used for several UNIQUE for vCenter Server services protected authentication servers. A license is required per instance of vCenter Server.

• DOUBLE DB: ORA-17629: unable to connect to the remote database server

  [oracle@ora11g1 ~] $ export ORACLE_SID = sales
  [oracle@ora11g1 ~] $ rman target sys/sales@sales
  
  Recovery Manager: release 11.2.0.1.0 - Production Wed Jun 5 13:00:15 2013
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  connected to target database: SALES (DBID = 690066655)
  
  RMAN > Connect auxiliary sys/salestby2@salestby2
  
  connected to the auxiliary database: SALES (not mounted)
  
  RMAN > CURRENT SPFILE DATABASE of TARGET duplicate FOR THE EVE OF the DATABASE
  2 > DB_NAME SET = 'sales '.
  3 > SET DB_UNIQUE_NAME = "salestby2".
  4 > control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl SET'
  5 > SET DB_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / '.
  6 > SET LOG_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / ';
  
  From duplicate Db 5 June 13
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: SID = 20 type of device = DISK
  
  content of Script memory:
  {
  backup that copy reuse
  TargetFile ' / auxiliary format of the u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora';
  clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora";
  }
  execution of Script memory
  
  From backup 5 June 13
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 58 type of device = DISK
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:26
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01017: name of user and password invalid. connection refused
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 05/06/2013 13:05:27
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:27
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01017: name of user and password invalid. connection refused
  ORA-17629: unable to connect to the remote database server

  Welcome to the oracle forums!

  Please take the time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535] FAQ PAGE

  Always after 4 version oracle numbers and details of the OS.

  Post any request outside has put between.

    \
  

  Tags

  Mark your questions answers if you give the answer

  Password for the SYS user on primary and standby must be the same. Copy the master password for the backup server

  SCP $ORACLE_HOME/dbs/orapwv112 : /u01/app/oracle/product/11.2/dbs/orapwdupv112

• XI Acrobat default pro email instead of e-mail application and remember my choice 2008R2 Remote Desktop server

  I have Remote Desktop servers with Adobe Acrobat XI pro 2008R2.  When a user tries to send a pdf by email, it pops up a message 'How you want to send this email' to choose ' email by default application (Microsoft Outlook) and remember my choice. "  So the next time they try to send an e-mail, the GET a warning "this email will be sent using"Default e-mail Application (Microsoft Outlook)".  Click on 'Edit preferences' to change your default account settings.  They do click on do not display this message and then continue.  (in fact, I have a couple of users who must go through this process every time that they sign the Remote Desktop server),

  I downloaded the pack of SMA political group and I can't find any of the default settings for a user.

  Are there group policy settings or a registry entry, I can do on the Desktop server remotely to these default settings?

  Thanks in advance

  Distilling is a different product. The prefs should go under Adobe Acrobat.

  Are BTW, you familiar with the Administrator's Guide and the Pref Ref? Acrobat-Reader Toolkit Enterprise Edition family

  Examples:

  [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\11.0\AVAlert]

  [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\11.0\AVAlert\cCheckbox]

  "iDigSigSaveAsCertified" = DWORD: 00000001

  "iAppDoNotTakePDFOwnershipAtLaunch" = DWORD: 00000001

  'iavARMNoAutoUpdateWarning' =: 00000002

  "iDontShowWarn" = DWORD: 00000000

  "iSendMailDefaultAccountAlert" = DWORD: 00000001

  [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\11.0\AVAlert\cCheckbox\cAnnots]

  "iEmailCollisionConfirm" = DWORD: 00000001

  "iSharedReviewConfirm" = DWORD: 00000001

  "iSendForReviewConfirm" = DWORD: 00000001