PowerEdge r.620 and H710 integrated card cable

Similar Questions

• Referred to Dell r.620 and H710P PERC - backplane cable?

  Read this thread:

  http://en.community.Dell.com/support-forums/servers/f/906/p/19471857/20339141.aspx

  We ordered PERC H710P customer mini kit (342-3536-PCVT5) and 2 x 800 GB Solid State Drive SATA value MLC 3Gbps 2.5 in. (342-5821) for our r.620 (which previously only had the on-board controller S110). Can someone help me identify the part number for the cable necessary? Looking around without success.

  Hello

  As you initially had the S110 and it only supports the background configuration of the 4 HARD drive backplane I'll assume that it is the bottom of basket you have. If this is the case then the part number for the cable you need is:

  WVF6J

  This is the background cable basket for a PERC 4 HDD backplane SAS A connection mini. It works with all mini girl PERC cards in the r.620; who are the H310 and H710 (p).

  Normal sales agents in general have not access to sell these parts. In general they cannot sell the new components that are designated by a 7-digit reference number in this format 111-1111. Our spare parts department is who you must contact to buy spare parts 5 figures.

  http://www.Dell.com/support/contents/us/en/04/article/contact-information/sales/sales-phone-numbers

  800 357-3355 is the number listed for them. Be sure to reference the contact page in the future as long as the number can change. It will be not updated in this post, but it will be updated on the contact page.

  Thank you

• Hi, I use photoshop CS6 on my laptop with both GPU and when I ho in Preferences-> performance it detects my integrated card. How he move on to my second?

  Hi, I use photoshop CS6 on my laptop with both GPU and when I ho in Preferences-> performance it detects my integrated card. How he move on to my second?

  Very well. I had to put my best GPU as a default value. Now it's working. Thank me for having responded.

• Operating system for r.620 and iDRAC Express installation path

  I have a new PowerEdge r.620, 8 chassis Bay, no optical drive, with iDRAC7 Express edition.

  I've got the interfaced web DRAC configured and I can access it fine. I have a Ubuntu sitting on another server accessible through HTTP I want to get and install from an .iso image. What is the method to do this, use DRAC7 Express? Isn't this possible?

  I see the 'Remote file sharing' configuration settings, but they are not available in the Express edition. The docs for help I need a business license in order to use it. I guess it's the only way to mount an ISO on the network, which is unfortunate, because our old R610 does not require an additional license just to mount the ISO network files.

  Suppose I can't mount an ISO as a virtual media image. What is the method recommended by Dell to perform an installation of the OS with just DRAC Express and no internal optical drive?

  Hi rwhaley,

  You can have a business card in the R610 who are not licensed as the new r.620 12 G.

  The only way you can do this through connection to the DRAC is to upgrade the express to the company.

  You can refer to your service representative sales Dell and ask for a 30 day trial license, which could help you to install your operating system.

• Raid PowerEdge r.620 with single hard drive controller

  Hi all

  I have Dell PowerEdge r.620 with 1 * 1 TB hard drive, Raid Controller using mini H710... When I try to install Win Server 2008/R2 x 64 the HDD is not detecting, I've read in this forum of the disc cause hard does not detect is pilot raid is not installed, but I don't have that single hard drive is possible to set up raid with single hard drive or I don't have to use raid controller but I still don't understand how to set up the server with no raid...

  Thank you...

  Dimm21

  Sorry for the late reply, do you mean raid controller in the server? If you want to say, I always do not install driver coz is new server than i've got...

  I want to know, if posibble install raid on one hard drive and how to configure who... Server raid controller is mini H710

  Thanks for your response

  Yes, the RAID controller.  One you have?  I'll assume a PERC H710 for now:

  The H710 PERC is NOT compatible non-RAID (you cannot use a single disk without RAID)... in order to use a hard drive, you MUST configure a single drive RAID 0.  This must be done in the RAID controller BIOS utility, accessed by pressing CTRL-R during POST when prompted.

  Once configured, you need TO load the driver for the operating system, see the drives connected to the controller.

  If you have a H310, it SUPPORTS no RAID, so you do not have to configure anything in the RAID controller BIOS, HOWEVER, you MUST always load the RAID controller driver during installation.

• SR2180NX adding memory and a video card, how?

  I finally decided to do a upgrade to my PC but I pushed my brain batty, trying to figure out how I would add memory and if I should update my video card now cause my Sims 2 game, instead of smooth running, it runs a little rough and frame by frame. Very annoying. I also want the Sims 3 to be able to run on my computer, I hope I can get it all done before they release.
  I have windows vista Home premium, and I have a PC I did not do anything for her, so it's a bit as if it was from the factory around a few programs of vanilla.
  
  * Manufacturer * Compaq Presario
  * Product * RK548AA-ABA SR2180NX
  Total number of logical CPUS * 2
  Total physical memory * 1.00 GB
  Total number of optical drives * 1
  Total number of disks hard * 1
  Total number of video cards * 1

  * Memory *.
  ------------------------------------------------------------------------------
  * System memory * total physical memory * 1.00 GB
  * Free physical memory * 443,21 MB
  Total virtual memory * 2.00 GB
  * Free up virtual memory * 1.94 GB
  * Page file space * 2.24 GB
  
  * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
  * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
  * Manufacturer of memory * Hyundai Electronics
  * Date of manufacture memory * week 39, year 2006
  * Revision memory code * 4141
  
  * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
  * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
  * Manufacturer of memory * Hyundai Electronics
  * Date of manufacture memory * week 39, year 2006
  * Revision memory code * 4141
  
  * Video card *.
  ------------------------------------------------------------------------------
  * Intel (R) 82945G Express Chipset Family * manufacturer * Intel Corporation
  * Video card chip Type * Intel (R) 82945G Express Chipset Family
  * Video card memory * 256,00 MB
  * Video card BIOS * Intel video BIOS
  *Driver*c:\windows\system32\drivers\igdkmd32.sys
  * Version * 7.14.10.1461, 25/03/2008
  ------------------------------------------------------------------------------
  and it's the plug to run the Sims 3
  ------------------------------------------------------------------------------
  THE SIMS 3 MINIMUM REQUIRED HARDWARE CONFIGURATION
  
  FOR WINDOWS VISTA
  * Windows Vista (Service Pack 1)
  * 2.4 GHz P4 or equivalent
  * 1.5 GB OF RAM
  * At least 6.5 GB of disk space hard at least 1 GB additional space happy Custom
  * 128 MB video card with support for Pixel Shader 2.0
  
  For computers using built-in graphics chipsets, the game requires at least:
  * Intel Integrated Chipset, GMA X 3000 or more.
  * 2.6 GHz Pentium D CPU, or 1.8 GHz Core 2 Duo or equivalent
  * 0.5 GB additional RAM
  
  SUPPORTED VIDEO CARDS
  NVIDIA GeForce series
  FX 5900, FX 5950
  6200, 6500, 6600, 6800,
  7200, 7300, 7600, 7800, 7900, 7950
  8400, 8500, 8600, 8800
  9600, 9800, GTX 260, GTX 280
  
  Series ATI Radeon™
  9500, 9600, 9800
  X 300, X 600, X 700, X 800, X 850
  X 1300, X 1600, X 1800, X 1900, X 1950
  2400, 2600, 2900
  3450, 3650, 3850, 3870,
  4850, 4870
  
  Intel® Extreme Graphics
  GMA X 3 x 00 series
  Laptop versions of these chipsets may work, but can run relatively slower. Autonomous cards installed in vanilla (not PCIe or PCIx or AGP) PCI slots, such as some GeForce FX variants, will perform badly. Intel chipsets integrated starring parts underclockes would not run properly.
  
  Chipsets integrated such as the ATI Xpress and the NVIDIA TurboCache variants will have low settings selected, but should operate satisfactorily.
  
  Please note that attempting to play the game using video hardware that is not listed above may result in reduced performance, graphical issues or make the game work do not at all.
  The NVIDIA GeForce FX series is unsupported under Vista.
  
  and he also said when I watched the news of the memory of the BIOS screen:
  
  Installed memory 1024 MB/PC2-4200
  Bank 1 512 MB/DDR2 SDRAM memory
  Memory Bank 2 not installed
  Memory bench 3 512 MB/DDR2 SDRAM
  Memory bench 4 not installed

  I know that I have to add memory and a video card, or even a power supply according to the video card, I get. Memory seems simple and easy to do, but the power SUPPLY and the video card, makes me a little nervous, any suggestions on what I should get and instructions on how to proceed will be greatly appreciated Thx! I apologize for this post being so long.

  Message edited by CareBear31 on 02/05/2009 13:02

  Adding instructions are here. When you buy new memory be sure and go to the website of the manufacturer of the memory. Use only brands so that they ensure th your product compatibility. Use the memory Configurator tools on the website of the manufacturer of the memory. Here are a few major brands for you: Kingston, Crucial, Corsair:

  Change the power supply: This video on youtube is pretty decent for generic power supply switching.

  Thislinkhas information on opening the cover and remove the cover.

  When you select a video card do not get cards great physically (i.e. ATI HD 4870 / 4850) because they are double wide and does not have limited space. Fantastic cards but are not for the pre-built PC.

  Any ATX PSU fits your case. 450 watts or therabouts enough for almost any addition of hardware on your pc. Do yourself a favor and stick the best brands such as Corsair, OCZ and others. Generic brands are not worth the problems they can bring even if they are cheaper.

• Pavilion a6120n: USB ports and slots memory card does not

  My Pavilion a6120n desktop computer has worked brilliantly since I bought it. Since last week the 2 front usb ports and 2 unused usb ports in the back have stopped working. My printer is plugged into a rear port and my wireless mouse is plugged into a second rear port and these work very well.

  I use usually a USB key for the exchange of data or card reader locations (which have also stopped working). I no longer see memory card icons in the window 'computer '. When install something again the "new hardware found" statement appears, but the driver install always fails. I think it's a software problem, but there is no usb drivers to download on the HP/support site that I can find... so...

  Here's what I've tried so far.

  Run antivirus software. Full scan & scan memory - no problem

  Don't scan complete malewarebytes - no problem

  I tried to reboot several times without success.

  Catering to several previous = failure restore points

  Computer restart in repair = failure mode

  Use the repair disk I did = failure

  Control the management of the power supply for each usb port see if power was properly routed = ok

  Removed the cover of the housing and carefully inspected the cables and connectors.

  Finally I tried to uninstall the drivers usb = failure

  After restarting the computer the last time that the boot file has failed, and after several hours of attempting a repair, I had to reinstall Windows 7 completely.

  Still no usb or memory card function.

  Any help would be appreciated

  Thank you

  MrBob38

  OK, after a lot of frustration and a reflection to when the problem started. I discovered it all started when I installed my new HP Envy 4500 printer all-in-one. It has wireless capabilities, but I installed it via a usb cable.  I just didn't know it would be the problem but I started with this premise.

  I got all components usb of the computer (except the mouse at the moment). So I uninstalled all the usb drivers I had on Device Manager.

  After restart, drivers loaded automatically and everything works fine now. I see my camera via the connection cable, the work now in sd slots and all the work of the usb.

  I left the 4500 want connected and installed the printer with the network provided on the installation disc software. I test printed from my computer and iPod so far, and it still works properly.

  I did have to reinstall Vista. Could it have been a glitch in the installation of the software want to through the usb cable? Don't know and don't care at this point. Just happy that everything works.

  Thanks for the comments, and I consider this problem to be solved.

  MrBob38

• Reference Dell studio 1536 gacé graphic / help__i have a computer laptop dell studio and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook

  Ideas:

  • I have a dell studio laptop and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook

  There SR 780 chip and also I could not find any housing emty external or internal to a 3D support
  Help, please

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi waheedkhan

  Welcome to the Microsoft Answers Forum!

  To install additional video card for laptop is not possible as desktop, as the video card is integrated with the motherboard. However you can contact Dell technical support if they can provide an additional location for add video card. Here is the link to the support technology guide below: http://support.dell.com

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Integrated card reader has stopped working.

  I have a Dell Inspiron 530 s with Vista Home Premium. The integrated card reader stopped working after I removed a SanDisk Extreme 16 GB microSD card. Readers have been H, J, K and L.

  I tried: restart. Uninstall the device drive and reboot and let windows detect the driver.

  Even after reboot several times, and my own research I do not find the readers anywhere.

  I also looked under disk management, and it does not appear.

  I don't know what else to try. Any suggestions?

  Thank you

  Jinn

  Try the Fixit http://support.microsoft.com/mats/hardware_device_problems/

• Can the server PowerEdge T110 II add a network card?

  Hello

  I need an additional NETWORK card for my T110II but it does not detect a TP-LINK TG-3468 PCI-express card.

  Start the server, but I do not see the screen of boot rom (bios Integrated NIC) and Windows do not detect the new device.
  The T110II do not recognize a card RAID SATA AS-Rock with boot rom too.

  I think that the problem comes from the boot of these PCI-e cards rom. Is there a solution to detect these cards?
  Or you know a network card compatible cheap gigabit?

  I already asked my country DELL support, and I have no answer.

  Thank you

  Sorry for the questions in the NETWORK card getting to work.  The system will certainly take additional network cards, the T110 II 4 PCIe slots:

  Two x 8 slots (one with x 16 connectors)

  One x 4 slot (with x 8 connector)

  A x 1 slot

  The integrated port is the Broadcom® BCM5722 gigabit Ethernet card.  When it comes with Dell servers and 3rd-party cards, questions may arise if you have a network adapter that is certified to work with the device.  Dell cannot support the cards that are valid and tested within the server.

  A very common that we see added to the system is the Broadcom 5709, NIC PCIE4 Dragonfly.  The card is popular because it can be associated with the on-board.

  About your SATA RAID card, questions are the same it regarding uncertified maps.

  Lastely, I would make sure you have cards in cracks, here is the link to the manual, System 68 page has details about the locations specific PCIe priority and system information

  support.dell.com/.../T110.pdf

• failed to connect to the virtual console (Java) iDRAC7 - PowerEdge r.620

  I am trying to run the Console java applet virtual iDRAC7.

  After clicking through several pop-up windows, die "connection to the server of virtual console...". THE CONNECTION HAS FAILED.

  How to solve this problem?

  -If the machine is PowerEdge r.620 with license full iDRAC (connected via a shared LAN port).

  -iDRAC Firmware version 1.40.40 (build 17), the controller firmware 1.1.1.18 lifecycle

  -Host operating system: Win7 x 64, Firefox 27.0.1,

  -1.7.0_51 Java, set security level to the minimum set of live internet connection.

  -iDRAC settings on the virtual console: type of plugin java =, port 5900

  -ActiveX plugin on 32-bit Windows XP with IE 8 works almost well (IE11 on Win7 is useless because of issue of certificate).

  Do I need a firmware update? Update Java applet?

  Thanks in advance

  -ddbug

  DDDBug,

  IDrac and LC are behind on updates. I would like to begin by bringing current. I have provided links to the 2 updates. To clarify, when you spent native java, it works, or not?

  1.3.1 LC - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r620?driverId=TNJFT&osCode=WS8R2&fileId=3341214911&languageCode=en&categoryId=SV#

  iDrac7 1.51.51 - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r620?driverId=JGG1X&osCode=WS8R2&fileId=3334005292&languageCode=en&categoryId=ES#

  Let me know how it goes.

• My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this.

  My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this. All the settings are there. I have an IPhone 6.

  Are? you double click in front of the screen of the iPhone are? (pending). This is what seems to work for me.

  I hope this can help.

• I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get i

  I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?

  The United Kingdom, where did buy you it?

• Pavilion dv7-6b63us: if I add a second hard drive and if so this cable etc would I need to do?

  Can I add a second hard drive, and if so what cable etc would I need to do?

  Hello

  For many machines such as Envy 17, dv, Pavilion 17... 17 "(ou 17,3"), you can add a second HARD drive (my old ready dv7 has two HARD drives and my current loan Envy 17 also has 2 HDD). " You need the following package:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info & products_id = 379

  Kind regards.

• Satellite L30: Cannot watch DVDs - error between the decoder and the graphics card.

  I'm watching DVDs on my satellite L30, but also good Windows media player and the application of Toshiba, will not let me.
  He said that there is an error between the decoder and the graphics card.

  I checked and I'm set for region 2 and windows says I have the right drivers for the dvd and the graphics.

  Any help would be appreciated with gratitude

  Hello

  Try it please with the K-lite codec pack. Download and install it. Maybe it helps.