Pavilion a6120n: USB ports and slots memory card does not

My Pavilion a6120n desktop computer has worked brilliantly since I bought it. Since last week the 2 front usb ports and 2 unused usb ports in the back have stopped working. My printer is plugged into a rear port and my wireless mouse is plugged into a second rear port and these work very well.

I use usually a USB key for the exchange of data or card reader locations (which have also stopped working). I no longer see memory card icons in the window 'computer '. When install something again the "new hardware found" statement appears, but the driver install always fails. I think it's a software problem, but there is no usb drivers to download on the HP/support site that I can find... so...

Here's what I've tried so far.

Run antivirus software. Full scan & scan memory - no problem

Don't scan complete malewarebytes - no problem

I tried to reboot several times without success.

Catering to several previous = failure restore points

Computer restart in repair = failure mode

Use the repair disk I did = failure

Control the management of the power supply for each usb port see if power was properly routed = ok

Removed the cover of the housing and carefully inspected the cables and connectors.

Finally I tried to uninstall the drivers usb = failure

After restarting the computer the last time that the boot file has failed, and after several hours of attempting a repair, I had to reinstall Windows 7 completely.

Still no usb or memory card function.

Any help would be appreciated

Thank you

MrBob38

OK, after a lot of frustration and a reflection to when the problem started. I discovered it all started when I installed my new HP Envy 4500 printer all-in-one. It has wireless capabilities, but I installed it via a usb cable.  I just didn't know it would be the problem but I started with this premise.

I got all components usb of the computer (except the mouse at the moment). So I uninstalled all the usb drivers I had on Device Manager.

After restart, drivers loaded automatically and everything works fine now. I see my camera via the connection cable, the work now in sd slots and all the work of the usb.

I left the 4500 want connected and installed the printer with the network provided on the installation disc software. I test printed from my computer and iPod so far, and it still works properly.

I did have to reinstall Vista. Could it have been a glitch in the installation of the software want to through the usb cable? Don't know and don't care at this point. Just happy that everything works.

Thanks for the comments, and I consider this problem to be solved.

MrBob38

Tags: HP Desktops

Similar Questions

  • USB ports and the sound card does not

    My sound card and arrested USB ports stopped working.

    I have no sound.

    Sony Vaio VPCEA3BFX

    WIndows 7

    I have restored all the drivers, performed troubleshooting tasks all the recommended other than a complete restoration. What else can I try?

    Hello truck,.

    Thanks for the post.

    Try the following troubleshooting steps:

    Audio problem:

    1. Reinstall the audio driver: Realtek High Definition Audio Driver.
    2. If the problem persists, follow these steps: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1009501
    3. Next step is the recovery of the system: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1027232
    4. If the problem persists, contact the Sony service team: http://esupport.sony.com/US/p/service.pl

    USB problem:

    1. Reinstall USB drivers: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1004056
    2. If the problem persists, perform the hardware diagnostic test.
    3. Make sure that any external USB device is connected with the computer during the whole process.
    4. http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1019507
    5. If the problem persists, restore the system to a previous date: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1003813
    6. If the problem persists, perform a system recovery.
    7. Then, contact Sony service team.

    Please indicate the solution as accepted, if you find this information useful.

    Kind regards

    Tony.

  • Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord...

    Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord... He lost. :/

    The following steps may be worth a try:

    Insert your memory card into your Media Player...

    Reach... Start / computer...

    What is the memory card show as a drive letter? (if your Media Player)
    has several slots, there will be several "hard drives" listed... the
    SD card will be one of them)

    If_Yes_right click on the drive letter correct and in the menu... Choose...
    Open... now you should see the directory of the memory card or to explore.

    From there you should be able to drag and drop or copy and paste the
    files in a folder on your hard drive.

    Also... the following items may be worth a visit:

    Windows Vista-
    Troubleshoot AutoPlay
    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

    Windows Vista-
    How to change the auto run settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

    Windows Vista-
    AutoPlay: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  • HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

    My new laptop usb port for the left side does not, only 1 work on 3 Please help me

    Hello:

    Have you installed the drivers for W7 32 bit amd chipset?

    If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

    You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

  • Slot for memory card does not support SDHC memory cards.

    Dear friends,

    I have a Windows XP Pavilion dv4000 laptop from 2005 with a memory card slot that does not support current SDHC memory cards.  Is there an updated driver for this niche that I need to view these maps?

    Greetings to all from

    John P. Owens

    Dear BH,

    Who did it!   I am running with the memory cards SDHC now.  Thank you 1 million.

    Kind regards

    Jack Owens

  • Phone smart BlackBerry Smartphones and the memory card appears not

    I have a Storm 9530. When I synchronize with the Fund Manager for this. When I try to upload music, it says please insert a memory card and you reconnect to your computer. I have a card in there and have tried 3 different ones. It also displays all the icons on my desktop Mac blackberry. Card appear in the Options of memory. Auto enable mass storage Mode when connected is set to NO, is this true?  Thank you

    Hi dbond,.

    Try setting Auto enable Mass Storage Yes and defining the MTP (Media Transfer) Protocol to disabled. This article should provide more information. http://bbry.lv/rqhkNV

    I hope this helps.

  • Unit SDHC memory card does not detect

    Original title: memory card SD PNY for my camera

    I can't get my computer to recognize my camera SDHC memory card.  He behaves as if nothing has been inserted into the port.

    Thank you

    Hi archjunkie16,

    1. Don't detect other USB devices on the computer?

    We recommend that you connect the memory card on another port and check the result.

    If the problem persists, download and run Microsoft Fix it and check the result. To do this, try the following steps:
    a. check out the Tips for solving the problems of USB devices
    b. click Microsoft fix and run successfully.
    c. restart the computer and check if the problem persists.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Change of memory card does not valid warranty?

    I think of buying a Tecra laptop. I'm interested has 512 MB of RAM. If I buy a memory card separately and install it myself is my guarantee becomes invalid?

    All responses appreciated!

    No, certainly not.
    The upgrade has no bad influence on the status of the guarantee.
    For most memory locations are placed at the bottom of the unit and remove the screw.

    PS: Have you checked the user manual? There must be some description of the upgrade memory...

  • Satellite A300 - 20 p - MS Pro Duo memory card does not work

    I have a laptop Toshiba Satellite A300 - 20 p and MS DUO memory card stopped working.
    He always asks me to format the card.

    I tried three cards of the same type, but still the same problem.
    The cards work in my PSP and my Sonyericsson mobile as well as all computers laptops hp.
    I gave the phone to service center Toshiba here Bahrain and they tell me that this card is not compatible with Toshiba, but this card has worked before in this same laptop...

    My laptop isn't even four months, and this is the response I get.
    What is the use of the international warranty of two years if they cannot solve the problems...

    Please help me so sad, I bought a toshiba laptop...

    Thank you

    Hello

    The computer s laptop Satellite A300 card reader - 20 p are supported on these cards:

    8MB - 2 GB SD card
    4 GB to 16 GB SDHC card
    16MB - 2 GB xD Picture card
    Memory Stick 8 to 256 MB
    Memory Stick Pro 256 MB to 4 GB
    8MB - 2 GB MultiMediaCard
    miniSD (with adapter) 32 MB - 2 GB
    512 MB - 4 GB microSD (with adapter)
    Memory Stick Pro Duo(with adapter) 256 MB - 4 GB

    As you can see the Memory stick Pro Duo is compatible and can be used with the adapter. But only card up to 4 GB are supported.

    In your case I recommend you remove the card from the card reader location.
    -And then uninstall the driver from card reader in Device Manager.
    -Then download the driver for the card reader from the European driver Toshiba page.
    -Then install the card reader driver
    -restart the laptop and check the card reader again.

  • HP touchsmart 520: usb ports hp touchsmart 520 side does not

    usb ports side Device Manager does not tell all the works, but nothing picks up, but ports usb back all work

    Greetings @idwer16.

    Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that some USB ports do not work on your system. I'm happy to help you with this. As a start, please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

    The side ports worked before?

    Are the version of USB ports on the side of 2.0 or 3.0 on your model?

    Have you tried updating the drivers on your computer? If this is not the case, the HP Support Assistant could help with this. On most models done component USB on board chip set drivers.

    HP computers - using HP Support Assistant (Windows 10, 8, 7)
    HP PC - troubleshooting HP Support Assistant (Windows 7)

    Another document that could help may be Computers HP - troubleshooting USB (Windows 7) connections.

    Please let me know if none of this works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • ENVY of HP dv7-7265er - USB ports on the right side does not

    Test of the UEFI BIOS (after update F.10 F.29)

    Check USB port: FAILURE

    FAILURE ID: QWB664-6GX74K-QFPK0K-8D1W03

    PRODUCT ID: C6D03EA #ACB

    Hello

    Please find the link manual below the part number is USB card (includes cable) 681986-001 & check the page numbers 73 component replacement procedures.

    http://h10032.www1.HP.com/CTG/manual/c03591253.PDF

  • my memory card does not open in my computer

    I used my cards before memory on my laptop and recently, I tried on my new laptop as old one computer but the laptopr is not picking up at all even the box AutoPlay is up, I have two new memory cards nothing comes as I used my old memory card yet, nothing comes, please help.

    You may need to adjust the automatic run settings:

    Windows Vista - How to change the auto run settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

    Windows Vista - Troubleshoot AutoPlay
    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

    Windows Vista - AutoPlay: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  • Camera memory card does not work in the computer

    Until today, I inserted 2 cameras memory cards in the drive of Dell computer and they worked very well. Today, they do not. I use Windows 7. Any suggestions?

    Memory cards are frequently blur when windows write process fails to complete properly, causing incomplete information to write in the card.

    It is a question of the computer, you see not no map at all, or he sees the card but you said it must be formatted before you can proceed?

  • Printing & working copy, but savings from the memory card does not work

    Photosmart Prem C310 printer with current driver and firmware

    Wireless connection

    PC is Windows 7

    When I try to record from memory card to the PC I get the message, «!» No set up.  You must install the software for the device. "on the touch screen of the printer.  What Miss me?

    Hi LZimmerman,

    Follow these steps to map the card reader

    1. Insert the memory card into the printer
    2. open my computer
    3. click on network drive mapping
    4 Select the letter of the drive you want and enter the folder \\192.168.1.101\memory_card

    Note: replace the 192.168.1.101 with the IP address assigned to your printer.
    5. click on finish, and the Player opens for access to the files

  • Memory card does not work on my Satellite L305D-s5893

    Hello

    I reinstalled the operating system and downloaded the drivers from Toshiba s drivers page, the only driver (I thought) doesn't you work the card reader.
    I put an SD card in the card reader, but the OS does not read anything.
    Is there another drive for the card reader, or maybe the card reader does not work?
    How do I know this?

    Hello.

    If you can not use the driver from Toshiba, it is without doubt that the pilot is not suitbable for you. Toshiba has a lot of brands for Satellite L305, you may need to look at the correct driver for your model. From my experience, apart from the value Pack provided by Toshiba, I'll use Windows Vista update to find the most recent and correct drivers and download driver GP of supplier of the graphics card for my laptop after each new installation.

    Hope this can be your answer.

    Kind regards.

Maybe you are looking for

  • Replacing a video card on Satellite A210-1 has 0

    In my computer laptop Satellite A210-1 to 0 it is ATI Mobility Radeon HD 2600 broken video card. Now I can't find another as its old model. Including those different similar can (replace) put it inside my laptop?

  • Skype 6.16.60.105 drops after that call is place/received the WiFi connection

    Hello After the upgrade to the latest version ov Skype (6.16.60.105) - I can't not place/receive calls. When I call someone (call or video call) or when anobody calls me - Skype drops my WiFi connection. It was working fine before the update. On the

  • Quad core CPU in x230T?

    I realize that even if it were possible, cooling would be the main problem. But I'm curious to know if, say, an i7-3612QM might work in the socket on the mobo. It is rated at 35W, just like the i5 - 3320 m currently installed in mine. Via Intel ARK,

  • How can I achieve simple click on the wheel automatically oepns message

    Hi all I want to do exactly what blackberry for messages from the SMS Inbox. I create a folder to view the SMS received as SMS Blackberry Inbox. I created the Inbox / sending of messages for the TEXT box. When I click on the wheel, he opens all the m

  • latest drivers for visioneer 9450 usb does not

    I download and installed the latest drivers for this scanner on W7 32 bit and it does not work. Any ideas?