OfficeJet pro 8620: Wireless officejet pro 8620 Bluetooth printing

Similar Questions

• OfficeJet Pro 6970: HP Officejet Pro 6970 bluetooth adapter

  If anyone has tested the BT500 Bluetooth with the HP Officejet Pro 6970 or know another way to make this bluetooth printer.

  Thanks for the info. I used the direct WiFi and everything works.

• OfficeJet Pro 8500 a: printer no longer works after reset wireless network

  OfficeJet Pro 8500 has, MacBook Pro, running the Mavericks.

  For 3 days, when we added a password and blocked our router wireless (modem ATT UVerse), our printer is "offline" print jobs queued, but do not print.  When I go and check it says "printer offline".  Or in the print queue, it is something like "looking for printer."

  He worked briefly when we found a power cord and plugged into the laptop, but will not work wireless, which he did before.    No changes except to repeat password for the network.

  I have the manual and you have turned off everything, then return in the order recommended (router, printer, then laptop).  Always offline.   Can someone please?   Thank you!

  Hello @LindaGrace,

  Welcome to the Forums of HP Support!

  I understand that since to add a password to your wireless router your HP Officejet Pro 8500 has e-All-in-One Printer not communicate wirelessly with your computer Mac OS X 10.9. I would like to help you today with this problem of wireless communication.

  Now, make a change to your network, as an addition to a password or change a password, translates into having to reconfigure your printer on the wireless network. At this point your printer is to be 'blocked' access to your network wireless because of the change you made. To correct this problem, you simply raise the Setup wireless for your printer to "say" the printer network name and password. Once the wireless installation runs successfully all will continue to work for you according to the normal.

  To run the Wireless Setup Wizard on your printer, please follow the steps below.

  1. On the touch screen of the printer, press the right arrow key () to display the second navigation screen.
  2. Press network () to open the network Menu.
  3. Touch Wireless.
  4. Press the Wireless Setup Wizard, and then press continue.
  5. Please wait while the printer is looking for the routers that are nearby. Appears in the menu Select Network (SSID) .
  6. Scroll the list of network names until you find the name of your network.
  7. Tap the name of your network.
  8. If you are prompted, enter the WEP or WPA key. This is the password for your wireless network. The password is case-sensitive.
  9. Wait for the printer to connect to the network

  -Source

  Once your printer is connected to your network again, please try to print. If printing still fails, you need to add the printer to your Mac because of the connection of network new printers. Please follow the steps below to add the printer to the Mac.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scanand then check if the name of your printer appears in the printer list.

  3. If your printer is already listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the minus sign (), and then delete the printer

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer

  5. click Add to add the printer to the list.

  Now that the printer is properly configured on your network and added to the Mac, please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• My HP Officejet Pro 8600 cannot print from my MacBook Air

  Hello

  My HP Officejet Pro 8600 cannot print from my MacBook Air. It keeps on showing "the printer is not connected", but the display on the printer connected. I often reset the printer "EVERY TIME" I want to use. I also tried to turn off my laptop and printer several times before printing. If I'm lucky, it will work maybe for one or two prints. If no luck then I have to reset everything again. Sometimes I reset the printer, the printer is not displayed on my selection.

  Hello boojoo1tw,

  Welcome to the HP Forums!

  I understand that you are unable to print most of the time with your Officejet 8600. How is the printer connected? USB or wireless? What is your operating system on your Mac computer? Click here to find out.

  If your wireless printer, then I recommend the award of an 'IP address' by following this HP document on printer does not maintain the wireless connection.

  Please post your results, I'll be looking forward to hear from you.

• HP OfficeJet Pro 8500 is printing without my consent

  This morning I found that my OfficeJet Pro 8500 has something printed during the night without my consent.  All our computers had been arrested or locked, and my wife and I slept.  This is the document that he had printed:

  HP ePrint mobile printing

  Get it started...

  1. go to eprintcenter.com

  2 sign up and enter your code to printer:

  3 customize the email address of your printer, add applications and more

  It's something that HP is now pushing to printers, or is it something that the print driver on the system Windows 7 to my wife can have printed?  I looked online and I didn't know any information about it.

  Thank you!

  Hi Rich, page you describe in your post is the information page that is displayed when the Web Services are enabled on the printer. This is done from the panel display front end printers and is not something that HP can push to customers as the use of the service requires the acceptance of the terms & conditions by the user. I am at a loss to explain how this page could be printed unless someone Vienna activate Web Services to display on the front panel of the printer. The reason that he printed late may be due to a delay in communication between the printer and the ePrint service. To connect with HP ePrint service the printer must have been connected to the internet via a connection, either wired or wireless. If the printer is set up to your home network wireless PC installed on the printer shouldn't be turned on so that the printer to work.

  This is a link to a short video illustrating the ePrint on the AiO Pro Officejet 8500 installation.  This link contains information about the ePrint in general getting started with ePrint service

  To disable the Web services on the printer, press the icon on the display ePrint , and then select settings and delete Web Services. Run this command when your printer is connected to the Internet.

  I hope this information is useful for you.

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• OfficeJet Pro L7590 can print but not scan

  My printer (Officejet Pro L7590) can print and copy correctly, but the scan function - that has worked well at the same time - has just up and stop working, and my attempts to solve the problem simply go round.

  • When I try to scan using the button start scan on the printer, I get an error message saying 'no scan options '.
  • When I try to open the solution Center, it is said that he cannot run because the installation is not complete.
  • Uninstalling and reinstalling the software (latest version, which is three years, downloaded from the HP website) do not work. The software seems to go through the process of installation very well, but crashes on the stage finish ("product configuration"). Eventually it times out.
  • Once in this case, the installer downloads a supposed solution of the HP Web site. He told me that it is fixing the problem and asks me to restart the computer, saying it will continue after the restart. After I restart, the procedure does not continue, and the problem is not fixed - all the behaviors I describe above are still occurring.
  • Also downloaded one file with other solutions supposed to this question. They do not work. For the most part, they are variations on "run the setup software again", preceded by various other measures. However, when I do this, it re-not installing - it is a completely different window, and if I try to go back to the installation procedure, he refuses, telling me the software is already installed. (And yet when I try to open the solution Center, he always tells me it is not installed.)
  • Tonight is the third time I tried to troubleshoot it. On three occasions, I just gave up in frustration after a few variations of the cover above.
  • I'm this end =><= to="" going="" all="" office="" space="" on="" this="" printer="" and="" getting="" a="" new="" one="" based="" on="" the="" abhp="" principle="" -="">Anything But HP.

  I can't emphasize enough that it worked in the past and this basis still printing very well (with the exception of some strange problems with certain PDF files), but scanning has broken since my last round of hardware upgrades and refuses to be fixed.

  It's incredibly frustrating. Someone just make it work with minimal BS, as he has done before.

  I realize, this is a follow up very, very late, but apparently the problem has something to do with the 32-bit version of Windows 7 running. I recently installed the 64 bit version and now have no problem with any HP software.

  Well, except that sometimes he asked my permission to do an update then fails to actually download the update (I get the same "could not connect to content url" error message that many others reported here).

  Other than that, which is slightly annoying, but doesn't really affect what anyone, everything works fine now.

• HP OfficeJet Pro 8600, HP printer wizard installs not when the software is installed from the CD

  HP Officejet Pro 8600 e printer all in one

  Windows 7

  I had Assistant printer installed and working on my computer at least a year, then there was an update and it no longer works.

  I uninstalled the device and the software and reinstalled both on-site and directly from the CD without success.

  The only error I get is when I start everything first install it and there is a red "x" next to the update of windows.

  The installation process ends, the computer will recognize the printer and I am able to print but I have no control any function because none of these options in the wizard for the printer are turned on.  They are all grayed out.   The most important thing I need is the archiving of received faxes.

  Someone else in my family had the same problem, but was able to reinstall from the Web site and doesn't have any more problems.

  Thanks for any help.

  Hi liluno18,

  I want to help you with this question. I send you this link to the Microsoft forum on how to fix the red X on windows update. Follow the response from Joseph M.

  So I suggest you do a complete uninstall software of the JO 8600 and reinstalling the software once you have windows update works again.

  Let me know if you need help, I would be happy to help you.

• HP Officejet Pro 8600 Plus: HP Officejet Pro 8600 Plus printer-

  HP Officejet Pro 8600 Plus printer-

  Tried to copy both sides of a vehicle using ADF permit; paper too small (stupid user!); he copied the first side successfully. Now, I can't find the input document! How can I remove paper (which I can't find) which was too small for the auto feed?  It is not in the duplex unit, either.

  Hi @Dick_27,

  Welcome to the HP Forums!

  I appreciate that you try to remove the paper in your printer more HP Officejet 8600. I'm sorry to hear that, but happy to help!

  Please have a look through this guide, A display of the "Paper jam" error on the HP Officejet Pro 8600 e-all-in-one printer series.

  As well as this guide. The ADF (ADF) documents didn't pick up paper.

  I hope that these guides are useful and have a nice day!

• 8600 officejet pro to only print in black and white only

  How can I configure my 8600 officejet pro to only print in black and white automatically so I don't have to authorize whenever I print?

  Hi Andrewbono,

  You're welcome, I'm glad we were able to fix everything together!

  If you feel that one of my suggestions brought you a solution please feel free to mark it as an acceptable Solution to facilitate advice for others to find.

  Whatever it is, it was a pleasure to work with you and wish you a great week

• Cannot install hp officejet pro 8500 A909a printer using a disc. Get error "error-windows 7. hta is not a valid win32 application".

  Receive this consignment of error when you try to use a CD-ROM to start re - install hp officejet pro 8500 A909a printer.

  Error-windows 7. hta is not a valid win32 application.
  Help, please
   
  Original title: 64-bit Windows 7 pofessional

  Hello

  1 are you getting this error when trying to install the drivers for the printer from the CD?

  2. what exactly is the problem that you are facing with the printer?

  This problem may occur if the files on the CD are corrupt. You can download the current "Full Feature" software and drivers from the HP Web site at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3752456&

  You can also contact the HP support forum to get help:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3752456

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Is there a plugin that I need to download for my HP Officejet 7612 Wide Format Printer to be compatible with my MacBook Pro running my program CS6 CS6?

  Is there a plugin that I need to download for my HP Officejet 7612 Wide Format Printer to be compatible with my MacBook Pro running my program CS6 CS6?

  update the drivers of your printer.

• Printers HP Officejet Pro 8630: new HP Officejet Pro will not print

  Printer is set up to print wireless (network) and that shows all is well (wireless network-wise) but the print job stays in queue for a few seconds and then goes away... but no impression is made.

  Hi @JonathanWhite.

  Welcome to the Forums of HP's Support. I understand that print jobs disappear from the print queue. I would like to help.

  Normally this problem can be solved by running the HP print and Scan doctor.. Give it a run.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• Problem with vaio pro and bluetooth mouse.

  My new Sony Vaio Pro has been disconnected my bluetooth MS sculpt mouse.

  I had to re - connect or even re-install the mouse. Painful!

  It turns out that bluetooth devices is powered via a USB controller

  On the Generic USB controller, under properties, there is a check box selected that allows the computer to "Allow" computer to turn off this device to save power

  I unchecked which and now my mouse works fine.

  Thanks for that. I couldn't work at all with the Pro my bluetooth mouse. Now maybe I can - if I can only find where I put the mouse...

• HP officejet 8610: HP Officejet 8610 do not printing on HP premium photo 10 x 15 cm paper

  I tried printing on HP premium photo paper and it does not work. The message of the printer's paper. I tried with one page, 2 and 10 white sheets. The book is marked by HP's print face down. I tried to clean the rollers as shown here: http://support.hp.com/us-en/document/c04117836/

  The printer is new, it is the 4th piece of paper, that I try to print after 2 weeks in our House.

  Welcome to the community @lelouHP.

  I understand that your HP Officejet 8610 knows problems printing on photo paper. I will do my best to help out you.

  Did you try the other troubleshooting steps in the document below?

  Displays a Message "Out of paper" and the printer doesn't pick up paper for Printer series e-all-in-one HP Officejet Pro 8610, 8620, 8630, 8640 and 8660 "

  If this isn't the case, I recommend you try all the steps in order and get back to me with the results as well as the problems or the error codes that you met.

  If you have tried all the steps in this document and you still experience the problem, then you will need to contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.