"PP can now take full advantage of the PC with several GPU cards for export substantially accelerated time"

On the features page Adobe clearly shows:

Export multiple GPU support

Premiere Pro can now take full advantage of computers with multiple GPU cards for export substantially accelerated time. Rendering and compression just got a whole lot faster.

Can someone PLEASE be very specific as to how it works with the new 2015 CC?  I just bought my 2nd GTX 970 and SLI it had.  Now I read a lot of conflicting testimony online and can't seem to get a straight answer.  Please don't refer either items that are either outdated or forums.  Adobe CC 2015 was just released there not too long ago, which is what this new feature.

Is having two 970's beneficial for first use SLI and AE?  Can I use the SLI bridge or not?   Can I turn in NVIDIA SLI Control Panel?  Or did I frankly just lose $330?

Any educated idea would be GREATLY appreciated to help relieve this anxiety.  Thank you...




Eric Bowen of computers ADK is frequently here on this forum, and with Bill Gehrke, can give you the best technique advises compared to your current and future workflow exact. Change style and which codecs you use are very important.

Given that you JUST improved don't panic... There are a few simple adjustments, you can do to get the most out of your current equipment.

1. make sure your Samsung 850 pro has ONLY your operating system, programs and Windows swap file on it... nothing more. Turn off "Indexing" for all your disks in the system. You will need a separate and quick 'reader' for ALL your other files (images, previews, projects, export, media cache and cache files). The IDEAL reader for this is the new SSD Samsung SM951 PCI, which runs more than 1.5 GB/s.  The performance is going to be super fast. the use of this drive, but its capacity is LIMITED. You would then be advised to add drive hard level of large companies 'offload' all files to the guard. These recent hard drives crashed at 200 MB/s with a 128 MB cache on them and go up to at least 6 TB of size... they are not expensive.

2. your CPU is designed to be overclocked... TAKE ADVANTAGE of that and try to get the highest stable frequency, you can with it, ensuring that you use a good cooling solution--probably water. Performance will get a significant boost of this MOST important factor.  Of course, your CPU has "only' '8 processors" with hyperthreading from the end superior Haswell E CPUs that can give you sixteen YEARS... but, SPEED of CPU CLOCK is KING and will affect your performance because MOST of the video are processed ONLY with the CPU. NVidia GPU support will BE GREATLY whenever SPECIFIC on your timeline functions are those which can be CUDA accelerated... i. e "scaling", "ultra key", "dissolves" and a host of effects and other features. When it is the GPU CAN speed up the heavy calendar saturated with CUDA effects by a factor of TEN TIMES when "made this preview," or, "exporting media" your CPU has a stock speed of 3.6 Ghz and will be turbo up to 3.8 on all 4 cores. MANY users are overclocking your processor to a stable 4.7 Ghz... Some are more than 5 GHz! You can see that an increase of a full Ghz would give you about 20-25% performance... it's a LOT!

It has been said here on this forum that once the processor is more than 4 GHz, it's OK even to 4K.

However, I've ALSO seen here, (Eric, I think), that certain types of 4K really needs to have a GPU that has a minimum of 4 GB of memory DDR5 video memory due to "frame problem", or "frame buffer".    Thus, a return of the 970 s and KEEP one, (if it has 4 GB of video memory or more). Use the return to SM 951 drive.

3. make sure all your settings are properly defined. In Windows, power settings make sure that all settings are for OPTIMAL PERFORMANCE so that Windows reduce NOT anything automatically... I learned this lesson on my laptop... the DEFAULT settings have been throttling the CPU and the GPU all the time until I fixed it!

Then, first, make sure that you have the correct settings to allocate the amount of memory for first use... Eric has said here, it should be at least 3 GB by thread (I think... it can called ' base'...) I forgot). In YOUR case it means assign 24 GB of system memory for first, (8 'threads' x 3 = 24 GB). The rest can be defined for use in 'other programmes' of course, you can experiment and increase the amount of 3.5 or another higher.

4. do not panic... Bill and I have the same laptops Asus who two years now with the 765 m 2 GB NVidia GPU in them and the HQ of 4700 i7 CPU. We shitcanned included and 5400 RPM hard drive and we both installed two quality SATA III SSD in each of the two hard drive bays. We also each increased the memory of the laptop to 24 GB. Bill has already done a few projects 4K basic on his laptop and I have experimented with 4K on mine. On my laptop, basic editing is not a problem with 4K, but addition of video tracks and effects slowing it... However, the chronology which fixes not making it. YOUR machine correctly overclocked, with more memory than we and a SM 951 and a GPU 970 should do very WELL at the moment... I think.   Unless you want to spend 4 to 5 $000 on a new machine of Haswell E X 99!

p.s. If you are working with 4K and 1080 p quality, you need a couple of good monitors. I recently bought TWO 27 inch Acer IPS monitors that are WQHD, or, 2560 x 1440 p in the resolution. They were rated very high in addition to a review and are IPS... the density of pixels is IDEAL... to 27 inches, 1440 p video looks LIKE 4 K!   The quality of the color and the image is amazing. My laptop powers BOTH monitors at full resolution! We use HDMI 1.4 and the other the 'mini displayport' 1.1 connection... (which is also called Thunderbolt version 1). This monitor is only $200 on the egg, (including a $50 discount). Others in this class are 6 to 7 cents.

Tags: Premiere

Similar Questions

  • When I did this it called my disabled factory or pirated disk. How can I take my PC off the product key and got my other PC for its use?

    I have Windows 7 Professional.  Used it on my PC and then I had to buy a new Dell computer, as my old PC blew the motherboard.  The new Dell came with 8.1 if I want to install 7 on my wife's computer, as it did in Win98.   When I did this it called my disabled factory or pirated disk.   How can I take my PC off the product key and got my other PC for its use?

    If Windows 7 Professional is pre-installed on your Dell computer, it cannot be transferred. If it is a license purchased at a retail store, he transfer rights.

    A computer running Windows 98 is perhaps not powerful enough to run Windows 7.

    * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

    * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

    * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

    * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

    How to transfer a retail license.

    Click Start, type: CMD
    Right-click on CMD
    Click on run as administrator
    At the command prompt, type: slmgr.vbs - upk

    Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer. If you experience problems, try to activate by phone:
    Activate Windows 7 manually:
    1. click on start and in the search for box type: slui.exe 4

    2. press enter on your keyboard

    3. Select your country.
    4. Select the telephone activation option and brace yourself for a real person.

  • I have recently updated my laptop to Windows 10 and can now access Lightroom, I had the same problem before, when I upgraded and you were able to walk through the changes, can advise you?

    I have recently updated my laptop to Windows 10 and can now access Lightroom, I had the same problem before, when I upgraded and you were able to walk through the changes, can advise you?

    It seems that there is a problem with the graphics card.

    Please try the step under the troubleshooting topic: Adobe Lightroom GPU troubleshooting and FAQ

  • After installing Windows Vista, upgrades of office is now only 2 thirds of the screen, with one third black.

    Original title: April 16 to restart my computer after installing Windows Vista upgrades, my office is now only 2 thirds of the screen, with the third other black

    The whole office is there, but it is located in the Center, if the screen, with black bands at the top and bottom. By clicking full screen on the top right has no effect.

    Hi Jeremy,.

    Thanks a lot for your help. You're right, I should have said no upgrades and updates.
    There were a total of 10 updates:
    4 a security updates for Vista,
    1 security update for the Microsoft 2010 information access path,
    1 day of cumulative security for IE9.
    1 windows Live essential 2011
    1 definition update Windows Defender (KB915597)
    1 "" for Office 2010 "
    1 April 2013 malware tool
    I uninstalled Windows Live Essentials. I felt that I should not uninstall the updates of security, and the Defender update can not be uninstalled. It made no difference.
    I also checked the graphics card and told me that I had the latest version of the software.
    Then I checked the configuration of the monitor and graphics card configuration and found I could set the configuration to full frame. I did it and now all is well again.
    How and why the full frame disappeared April 16 remains a mystery.
    Thank you very much for your information without your help I would have been unable to delve deeply into the system. I learned a lot.

  • Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

    Hello world

    I need help here.

    My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

    I am preparing a second HDD (NEW 320) as backup.

    I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

    After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

    I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

    Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

    What can go wrong here in this case? Thank you very much for the help.

    Concerning

    John

    OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

    If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

    Model No.: m7-j010dx

    Product #: E0K83UA #ABA

    Ships OS: Windows 8 (64-bit)

    Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

    User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

    With the help of UCRDs sent media recovery media (SSRDs):

    When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

    A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

    Huh?  It looks that I did not put any time at all.

    I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

    After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

    The difference between UCRDs and SSRDs:

    UCRDs provide a glimpse of what is installed and functional both disks are created.

    Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

    SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

    So, that being said, what could be the cause/solution?

    Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

    The SSRDs are supported on the new HARD drive installed?

    I don't know, I have an office boy, and I have not tried on this model of laptop.

    If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

    If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

    Conclusion:

    I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

    But then again, I know.

    I am an employee of HP...

  • I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

    I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

    Startup Repair shows the following:

    Problem event name: StartupRepairV2
    Signature of the problem 01: external Media
    Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
    03:6 problem signature
    Signature of the 04:262148 problem
    Signature of the problem 05: BadPatch
    Signature of the 06 problem: BadPatch
    Signature of the problem 07:0
    Signature of issue 08: 1
    Signature of the problem 09: SystemRestore
    Signature of the problem 10:0
    OS version: 6.0.6000.2.0.0.256.1
    Locale ID: 1033

    Hello

    I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
    remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
    not tighten, effectively remove and replace them with care.

    Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

    By manufacturer diagnostic utilities
    http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
    SpeedFan
    http://www.almico.com/sfdownload.php

    HD Tune
    http://www.hdtune.com/

    ----------------------------------------------

    If necessary:

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
    saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

    You can use another DVD that are not protected but you will need to copy you have the product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    No new chances.
    Rob - bicycle - Mark Twain said it is good.

  • I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file

    I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.

    c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON

    This file can be replaced.  When I scan this folder individually its fine, please help

    Thank you

    Hello

    What protection software antivirus you are running on the computer?

    Method 1: Check if you can run the scan in safe mode without in all questions

    Follow the steps mentioned in the link below to access the secure mode
    Startup options (including safe mode)

    Method 2: you can run Safe Mode security monitor, see the steps in the article below
    How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe

    Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
    Check your hard drive for errors

    If the problem persists,

    Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference

    Note: Copy the file to the original location.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • can I listen to music on the watch with a wireless headset while I swim laps?

    can I listen to music on the watch with a wireless headset while I swim laps?

    Short answer, Yes, but you will water proof wireless headsets. Not for the first watch of Gen.

  • I can't synchronize my iTunes on the iMac with my iPhone

    After the update to iOs 9.2.1 on my iPhone, I can't synchronize my iTunes on the iMac with my iPhone. My iMac uses Os X 10.6.8 version.

    I never had any problem before synchronization I updated my iPhone iOs. Could someone advise me? Thank you!

    iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of system you run, but as he himself is very obsolete.  It may or may not be possible to upgrade your computer to the system requirements:

    You can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

    At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

    Mountain Lion 10.8 purchase link - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

    Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

    If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

  • How can I transfer video files to the library in windows media player for an external hard drive

    How can I transfer video files to the library in windows media player for an external hard drive. My os is Windows XP Home Edition and I use wmp 11.

    You have to locate the files on your internal hard drive, using the Explorer, then drag and drop them on the hard drive.  If you don't know where they are on your hard drive, right click on the video file in the library and choose the location of the opened file.

  • You can run Microsoft Security Essentials along the coast with Verizon internet suite? Or will they be in conflict?

    You can run Microsoft Security Essentials along the coast with Verizon internet suite? Or will they come into conflict.

    Hello

    You should be able to use the free version of Prevx with Verizon and Firefox.
    You may need to stop the function of safe online but you can try it. If it is
    are problems collate Prevx, Verizon and the Support of FireFox.

    Verizon Internet Security is just McAfee re-packaged.

  • The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

    Original title: USB problem

    I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

    Hello

    Start Windows Explorer, and then see if there is a drive letter assigned for access to the
    drive. If this is not the case, check if the disc is shown in disk management.

    1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    2. In the left pane, under storage, click Disk Management.

    If there has made a right click option - assign a drive letter for you can use Windows
    Explorer to copy files.

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Can fill us transitional attribute in the table with no serial like 1,2,3, etc.? And how?

    Mr President.

    Can fill us transitional attribute in the table with no serial like 1,2,3, etc.? And how?

    Concerning

    You want to show serial No. on the page for all the lines?

    Check once-

    Blog of Ashish Awasthi (Jdev/ADF): Add the serial number to the table of the ADF, column to auto-increment in the table to the ADF

    Actually transitional attribute loses its value when page refreshes or viewObject is not appropriate in this case if your use case is different, so please tell us

    Ashish

  • How can I buy Photo shop so that I can re-branded to Member of the team with their own username and password

    I would buy Photo shop and have it show that I can assign to a member of the team with their own username and password. I bought it once before, and it would allow only the administrator user name and password to access. would it be controlled by the cloud team account so that I can assign to a user and have all my products Adobe controlled by a single account. Photo shop will be for a single user.

    Thank you

    Doug

    Team license links that can help

    - https://creative.adobe.com/plans?plan=team team plans

    -http://www.adobe.com/creativecloud/buy/business.html

    -https://helpx.adobe.com/contact/creative-cloud-teams.html using the team

    -manage your account http://forums.adobe.com/thread/1460939?tstart=0 team

    -Team Installer http://forums.adobe.com/thread/1363686?tstart=0

  • I payd with my credit card for the CC costumes... why can I only download trial versions?

    I payd with my credit card for the CC costumes... why can I only download trial versions?

    Hi APS investment.

    I checked your account and I see that you have subscribed for the creative cloud for teams in which you have a license that you have assigned to the same Adobe ID, but the invitation is still not accepted.

    In order to activate the license, please accept the invitation of your receipt for the same email, then sign on the CC from Adobe and reconnect.

    Sign in, sign out | Creative office cloud app

    Kind regards

    Sheena

Maybe you are looking for