A tiny fly/ant/bug is on all fours on my screen

Similar Questions

• P2314T, black bar on all four sides, HDMI

  P2314T won't go full screen using the HDMI connection. At the blackness of an inch. How to get full screen? When you run LCD Conditioning is full screen. Auto setting is grayed out because the VGA not connected. Can't choose. I use the HDMI connection. Video Windows 8.1 AMD HD 7970 thank you card!

  It is a fault of the video card, not a fault of monitor. The scaling AMD Ati Catalyst is moved to about 7.5, which causes a thick black border around all four sides of the screen.

  * Right-click on the windows desktop
  * Left click AMD Ati Catalyst Control Center or the AMD Vision Engine Control Center
  * Along the left side, you will see my digital flat panels
  * Click on it and a submenu pulls down
  * Select Options (digital flat) scale in the submenu
  * You will see a scroll to underscan and overscan bar. Check the overscan box and drag it to 0% until your screen is filled
  * Click on apply and
  -or-
  * Right-click on the windows desktop
  Open the AMD Ati Catalyst Control Center
  * Switch to advanced mode
  * Click on the drop down at the top right graph
  * Select the desktop computers and screens
  * Right-click on currently active display. There is a little image of a tiny, tiny screen arrow below far left of the menu. It's this little arrow that you left-click on, and then click Configure. Then the following 6 keys will be at your disposal:
  Attributes
  Avivo color
  Scaling options
  HDTV support
  Screen LCD Overdrive
  Pixel format
  * Under attributes, check the GPU activate box scaling and image of the scale to the size of the whole screen
  * Click on apply
  * Select Configure
  * Click the scaling Options tab
  * Move the scale to the right until you get a picture full-screen 0%
  * Click OK

• I use VISA 5.3 for reading my serial device... my standard equipment is WELL this device will send four messages for only one comand I need all four messages to display at the same time in VISA SERIES READ BUFFER

  I use VISA 5.3 for reading my serial device... my standard equipment is WELL this device will send four messages of single command given to this instrument... and I read messages through VISA series READ... during the race, the VI buffer displays the messages individually...  I need all four messages to display at the same time in VISA SERIES READ BUFFER, in order to find more than this block, I should add from the palette of function.

  Disable character of endpoint detection or make four readings where you concantanate simply the strings together.

• Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself

  Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself

  Your lowered obtained resolution. This can occur if you are running an older game that uses 800 x 600 for example.

  Control Panel > display > settings - change the resolution to correct for your monitor. MS - MVP - Elephant Boy computers - don't panic!

• CP1700 - fault - attn: replace all four cartridges!

  Hello world

  My printer has served me VERY well for years. I have original cartridges (all the use by date), and all test ok print heads

  The printer just reported all four cartridges need to be replaced

  Clearly, something else has all broken, or obtained the dough...

  The clues of what I might try?

  THANKS in advance

  Kevin

  FIXED

  I suspect that the battery is down below the fully functional voltage - its an old printer!

  DIFFICULTY = completely remove the internal battery of the watch-like (large)

  For photos of similar printer/battery: http://www.land.netonecom.net/tlp/ref/letters/hpPrinters.php

  Here's what to do to remove the battery

  Lift the cover, look on the left side (side opposite to the print head and cartridge areas), it is just visible towards the rear. I could not quite put to work (safely) so decided to go back, as follows:

  Battery REMOVAL PROCEDURE = from the back of the printer remove the rear feeder by pressing the two big buttons and lifting of the body of the printer. Then remove the dark grey cover on the right (where all cable connectors crossed) by removing the two screws Torx of T-20, one on top and the other under the magazine platform, that you just removed. Drag the grey cover will cost about an inch and then it goes out completely. Under this cover, you will see a vertically mounted metal plate that has three screws Torx T10 you will need to remove. Once you did, wriggle and tip that plate (slightly) outside (be careful not to dislodge cables or connectors), just enough to see the battery. With a small screwdriver, taken the battery under his arm. THROW IT OUT. Look like upside down!

  My printer is now fully functional again - although currently, he grunts more than it used too - I think I dislodged some dirt/dust - anyway, it looks like it will continue to serve me well for a little longer

  I hope this helps someone

• Won't start at all. just a black screen. Only the satrts upward on safe mode

  Won't start at all. just a black screen. Only the satrts upward on safe mode

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem of Timer and TimerTask for counter display all seconds on the screen.

  Dear friends,

  I have little problem in the use of the timer. I took the timer to display the counter on each period fix repeatedly. but I did not here. Please help me. The code is as shown below.

  import java.util.Timer.

  java.util.TimerTask to import;

  Import net.rim.device.api.ui.Field;

  Import net.rim.device.api.ui.UiApplication;

  Import net.rim.device.api.ui.component.RichTextField;

  Import net.rim.device.api.ui.container.MainScreen;

  SerializableAttribute public class TimerTest extends UiApplication

  {

  Timer;

  public static int COUNT = 0;

  Public Shared Sub main (String [] args) {}

  TimerTest tt = new TimerTest();

  tt.enterEventDispatcher ();

  }

  public TimerTest()

  {

  a new screen

  pushScreen (new TimerMainScreen());

  }

  SerializableAttribute public class TimerMainScreen extends screen

  {

  TimerMainScreen()

  {

  Add (new RichTextField ("Count =" + Integer.toString (COUNT), Field.NON_FOCUSABLE));

  try {}

  Timer = new Timer();

  timer.scheduleAtFixedRate (new TimerMainEvent (), 200, 1000);

  }

  catch (System.Exception e)

  {

  do nothing

  }

  }

  private class TimerMainEvent extends TimerTask

  {

  public void run()

  {

  Try

  {

  COUNT ++;

  If (COUNTY<>

  Add (new RichTextField ("Count =" + Integer.toString (COUNT), Field.NON_FOCUSABLE));

  on the other

  Timer.Cancel ();

  Timer.Cancel ();

  }

  catch (System.Exception e)

  {

  Do nothing

  }

  }

  }

  }

  }

  Please let me know where I'm wrong, I want to display all seconds on the screen. If I set the interval 0 then it run TimerMainScreen first time but after all no update, I see on the screen.

  I thank in advance

  Vimal

  Use the following Code in your race.

   UiApplication.getUiApplication().invokeLater(new Runnable()
   {
    public void run()
    {
     add(new RichTextField("Count = " + Integer.toString(COUNT)   ,Field.NON_FOCUSABLE));
    }
   });
  

• Just upgraded my iMac to Yosemite.  He is now on all fours.  I intend to reformat the hard drive and install fresh Yosemite and reloading the hard drive.  Can I turn my CS 6 Suite and Lightroom and then reinstall.  Everyone knows a sl

  I installed my iMac (2009) in Yosemite.  He is now on all fours.  I intend to do a new installation of the operating system.  This forces me to format the hard drive.  I have already backed up my data.  With further regard to CS 6 and Lightroom is the appropriate mechanism to disable the program and then reinstall it from my Adobe account?  Any other input would be appreciated.

  Yes, disable it before uninstalling.

  to reinstall, you only need your serial number and installation files.

  the installation files:

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• 11 "Green Media" Bug - first elements all help?

  Hey everyone, I am having trouble with the first elements 11. Whenever I have add data to this project, he bugs and the entire video becomes green.

  The video itself is not the problem, as I have tried with other videos. This just started to happen, it was fine before. I use Windows 10. I tried to restart the program to see if it would be fixed, but not luck. Any help would be appreciated.

  AstroA

  Thanks for the follow up with important details of troubleshooting.

  NVIDIA Shadow Play catches have had problems in the past with Premiere Elements. I realize you are facing at a before and after the situation. But I suspect that this is independent of the operating system and version of Premiere Elements. But the answer will be in the details.

  The following link refers to an audio problem with NVIDIA Shadow Play video and Premiere Elements.

  Audio recordings of Nvidia Shadowplay is asynchronous to the video in first 12 items! How can I solve this problem?

  Think about download and install handbrake to get the H.264.mp4 @ version rate constant frame and then import this file in first 11 elements. Is the missing issue or?

  Premiere Elements does not do well with the video recorded with a variable rate. The symptoms are out of sync audio to not be able to import the file at all.

  Please confirm... are the current green imports into Premiere Elements of today project the same real files who worked before the 10th of Windows?

  Please consider the above.

  Thank you.

  RTA

• Bug: iOS 10, Siri invades even lock screen with power off

  iOS 10, Siri invades even lock screen with power off

  Since the upgrade to iOS 10 (iPhone 5 s) siri appears when I forgetting to unlock my phone because I'm not used to this way to unlock yet. But siri on lock screen is disabled in the settings. I can close siri all together, but I don't consider it as an option.

  Is this a bug in the iOS 10 or did I miss something?

  Hello nick_ve,

  Thank you for using communities of Apple Support.

  I see that since you have upgraded to iOS 10, Siri starts each time you try to unlock your iPhone and Siri on the lock screen is disabled in the settings. I completely understand, because when I upgraded, it took me a few tries to get adjusted to unlock with the Home key. I'm more than happy to help you with this.

  Press the Home button on your iPhone 5s once unlocks the screen, and freezes for more than one second will activate Siri. It is good to keep this in mind when you unlock your iPhone.

  There is also an alternative solution I would like to share with you. You can disable this option in settings > general > accessibility > Home button. Turn the finger remains open. You can unlock the iPhone with Touch ID without having to press the Home button.

  Have a wonderful day!

• All new computer, blue screen of death/accident

  My boyfriend and I bought a new computer 3 weeks ago, it was an e-machine. Kept crashing, got the blue screen of death error. Back to Best Buy for a new computer. Compaq Presario. Has taken a House. The same problem. Returned to Best Buy and exchanged for a new one, exact model. Exactly the same problem. Problem occurs when it is on Facebook, play games or even a game installed on the computer.

  I came to the conclusion after hours of research that the problem is Windows 7.  It is a brand new computer that I paid a lot of hard earned money for. It should not keep breaking without reason.  Was on the phone with HP tech support for over an hour, that still does not solve the problem.

  I don't know much about computers and what information you need, so I'll just tell you what's on the box. Let me know if you need more information.

  It is a Compaq Presario CQ5320Y PC with a processor dual-core AMD Athlon II X 2 240 Dual-core processor, 3 GB, 500 GB HDD, Nvidia GeForce 6150 SE graphics card.

  When it crashes it said space disk or something on a pilot. Launch of Nvidia and the updated graphics driver, it wouldn't let me update the driver for the card mother, says that there is a problem of incompatibiltiy.

  Here is the error message we continue to do.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 1e

  BCP1: 0000000000000000

  BCP2: 0000000000000000

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\061910-15693-01.dmp

  C:\Users\lance\AppData\Local\Temp\WER-27830-0.SysData.XML

  I've always hated apples but I'm seriously thinking about getting one until Windows can recover, if that's even possible.

  As happens with more than one system, it probably isn't a Windows problem and not likely to be a hardware problem.  Looks like it's maybe a driver issue, but without more details, it will be difficult to know.  Add nothing to the system (software, hardware, etc.) after he unboxing and problems?  If you care about that resolve at all - and I don't really think, you should because you get the behavior with new systems (use the warranty and keep complaining the problem if it keeps recurring; get your money back if it is an option, and choose another brand of system.) Keep in mind that you've got a failed system [or the entire model is a dud!] and this should not reflect on Windows 7)-start by downloading the vacuum as described below.

  Start here:   you can download the c:\windows\minidump content to your SkyDrive and provide a link?

  To treat blue screens, following general tips:

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  Other common suggestions include ensuring drivers are up to date (including video drivers), but also to ensure that you use the latest version of the BIOS.

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that passes the test is not necessarily good - he just failed a test.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings - > then-> the names of the drivers select in a list-> next-> sort by provider-> select all non-Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for an error checking to happen after you have enabled the auditor as described and then transfer it to your SkyDriveand provide a link.

• BUG: Tablet Mode does not fill the screen

  Hi all

  See this file:

  Dropbox - MicrositeRedesign05.muse.zip

  You will see that I have nothing to off on the side that would cause this behavior I learned other threads.

  Here is the live site:

  Home

  Not sure what's the bug, but I really need to know what it could be. This information is copied/pasted my version of office.

  Thank you!!!

  Dave

  See http://prntscr.com/4wpigl .

  Liberty Mutual Insurance logo at the bottom is placed much too right.

  See you soon,.

  Vikas

• After that update to EOS10 can not download the photos said all four phones on the account is locked

  Can not download pictures from iphoto on home computer after that download EOS10 said that all 4 phones are locked

  From information I have received, it seems that your iPhones have not been approved by our computer. If this is the case, plug in your iPhone to your computer and open it. A message of trust or not trust the computer should appear, then press trust. If not, please tell me which version of Mac OS X / Mac OS, you are running, and if EOS10 means iOS10.

• Qosmio PX30t all-in-one: black screen after a few minutes of inactivity

  I just bought a new all in one Px30t and I have 2 problems with it causing me to nuts.

  I have a mouse battery that dies after 24 hours and the screen goes black after a few minutes of inactivity.
  I changed the settings of the display in standby, the Power Options etc everything I can think of it doesn't seem to make a difference.

  Can also someone point me in the direction of a manual online for the model.

  > The screen goes black after a few minutes of inactivity.
  Can bring back you to life somehow, or you need to restart your Qosmio?

  Usually the manual s user document is saved on the HARD drive (preinstalled original machine). Can find you it?
  Did you check support page to Toshiba for manuals online (Toshiba page for the country of purchase)?

• Pavilion MS225: all on one black screen help

  Hi, from Thursday morning, I noticed a light flickering on the screen on and off during the day, then that night, the screen went black all of a sudden, I could put in sleep mode and wake him up, things went very well after that.  I turned it off for the night and kept overnight get this screen black (I could barely see the bottom of screen and icons) but I was able to see my login page for a few seconds when wake-up mode 'sleep'.

  I went to updates and saw that the Realtek High Definition Audio Driver need updated, so I tried and failed so he can install from Windows. I could see the screen enough to get on the industrial site and uninstall and reinstall. I reinstalled graphic discs too. Now, it seems to work very well, not black screen or flashing for about 5 hours now since the update the Realtek device. I was wondering if that was the question all along, is that this driver not getting updated cause screen problems? I also installed AMD Catalyst Install Manager and it updated the drivers.

  Honestly, I don't know much about computers and it is the only one I also gives access, any help would be appricated! Thank you

  Hi there @slyn1234,

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that your computer screen went black, and after updating the driver it works again.  I'm happy to help you with this.

  In response to your question, as to whether that was the problem, I'll give you a qualified Yes. It may be that the driver has been updated but that something has happened to the existing driver, the file has been corrupted, or another program or driver was installed that are in conflict. Another option is that a setting has been changed somewhere; There are several possibilities.

  If this kind of thing happens again, see if you can boot your system with the help of computers HP - safe mode of Windows 7. Windows safe mode will load with the base drivers and is a way to access your system, if it seems that there is a software problem. Can be modified in Mode safe as parameters to display, or drivers, or uninstalled applications that may not be easy to dismantle a normal start.

  Another useful to look at document is: HP PC - computer won't start (Windows 7). I hope this helps.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.