PPTP connected cisco VPN but Internet not working
What wrong with my setup but my device not "connected to the internet, I use ubuntu 12.04 LTS
Cisco 1841
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot system flash c1841-ipbasek9-mz.124-24.T.bin
boot-end-marker
!
logging message-counter syslog
enable secret 5 $1$eb9Q$7kMUF5Am0kVn/QXwssfrD/
!
aaa new-model
!
!
aaa authentication login default local
aaa authentication ppp default local
aaa authorization network default local
!
!
aaa session-id common
dot11 syslog
no ip source-route
!
!
!
!
ip cef
ip name-server 202.134.1.10
ip name-server 202.134.0.155
multilink bundle-name authenticated
!
vpdn enable
!
vpdn-group PPTP
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
!
!
!
!
!
username ala***n password 7 051B131C2A4343
username fa***ul privilege 15 password 7 03520B59565F701C16594B51
archive
log config
hidekeys
!
!
!
!
!
interface FastEthernet0/0
ip address 222.124.152.181 255.255.255.224
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
no mop enabled
!
interface FastEthernet0/1
description ====LOCAL=====
ip address 192.168.100.1 255.255.255.0
ip access-group 100 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
no mop enabled
!
interface Virtual-Template1
description ##PPTP TUNNEL##
ip unnumbered FastEthernet0/0
no ip redirects
no ip unreachables
no ip proxy-arp
peer default ip address pool PPTP_POOL
no keepalive
ppp authentication pap chap ms-chap
ppp timeout idle 360
!
ip local pool PPTP_POOL 192.168.101.110 192.168.101.125
ip default-gateway 222.124.152.161
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 222.124.152.161
!
no ip http server
no ip http secure-server
!
ip nat pool fahrul 222.124.152.181 222.124.152.181 prefix-length 29
ip nat inside source list 77 pool fahrul overload
!
access-list 23 permit 10.10.20.0 0.0.0.255
access-list 77 permit 192.168.2.0 0.0.0.255
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 permit ip 192.168.100.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration
access-list 101 remark SDM_ACL Category=1
access-list 101 permit udp host 203.197.12.30 eq domain host 121.243.96.154
access-list 101 permit ip 10.10.20.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list 101 permit ip 10.10.10.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list 101 deny ip 192.168.100.0 0.0.0.255 any
access-list 101 deny ip 10.0.0.0 0.255.255.255 any
access-list 101 deny ip 172.16.0.0 0.15.255.255 any
access-list 101 deny ip 192.168.0.0 0.0.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip host 0.0.0.0 any
access-list 101 deny ip any any log
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
Inside the network is also not in the definition of NAT. Add the following:
access-list 77 allow 192.168.100.0 0.0.0.255
Sent by Cisco Support technique iPad App
Tags: Cisco Security
Similar Questions
-
I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer. Or my computer will recognize any device connected to the usb port. I tried another ipod to check the usb ports work and they are. Ive run out of ideas. help please
Hello
Check with iPod Support and Forums for more information if necessary.
-IPod support
http://www.Apple.com/support/iPod/iTunes and iPod Support
http://www.Apple.com/support/Each iPod - iPod help & Technical Support (part 3)
http://www.EveryiPod.com/iPod-help/index.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
My computer seemed a crash with sidebar, adobe Flash Player and security problems. I can't get out to run and run. They go out and disappear quickly.
Sidebar will appear in the selection, but will not work. Defender will appear just saying quickly extinguished. Windows Security Essentials appears and extinguishes FST
saying not up to date and will not be open for the scan. Adobe said no uo to the latest version of flashplayer. All it seems to be stuck and not come out. Internet work
fine and so email.
Hi mgm842,
1. When did you start to question?
2. you remember to make changes to the computer before this problem?
3. you receive messages or error codes?
You can try to run a scan online and check.
Step 1:
You can check out the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.
Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.
Check out the link:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Step 2:
If you are still facing problems then try creating a new user account and check if the problem occurs:
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
If the problem is resolved in the new user, then check out the following link to fix a corrupted user account.
Fix a corrupted user profile:
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Hope this information is useful.
-
Flash Player seems to settle down, but will not work
Flash Player installs but does not work. When I go to the troubleshooting website (http://helpx.adobe.com/flash-player.html), the box fills the information. If I right click where the box should be, however, the menu display version information and behaves as if the AFP is installed. I cannot select parameters, but can select global settings. The global settings dialog box opens.
I use version 11.7.700.169, using IE 9 AFP and running Windows 7. I have 2 other PCs, and both deliver the program very well. So far, I have tried many things to solve problems with no luck.
So far:
-Uninstall complete, using the Adobe uninstaller program. I deleted the folders and content and, close and tried to reinstall.
-J' deleted the registry entry and also tried assigning zero value located at the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\ {D27CDB6E-AE6D-11CF-96B8-444553540000}.
-J' use Norton 360 and attempted an install with all services stopped (anti-virus, anti-Spam, protect Auto, etc.)
-J' checked filtering ActiveX is not checked in IE.
-Active X and the options of script in Internet Explorer > tools > Internet Options are enabled and the selections on both PCs in mirror work.
-J' tried to uninstall and reinstall an earlier version of AFP with no luck.
-Shockwave Flash Object Addon is enabled.
Screenshot is included to show what is happening on the screen to redirect after that I installed AFP.
I am running out of ideas and would appreciate any help on this.
Thank you!
I am a little disappointed by the forums - no responses. I am happy to share, I found the problem and I share the solution in case others have the same problem. The interesting thing is the setting that I've changed, it's different on the two computers to work. In IE9, go to tools > Internet Options > advanced and the first graphics acceleration checkbox... check it out. Restart IE and voila, it's fixed. The other two PCs that I use have this box unchecked and AFP works fine... weird.
-
First 10 Elements must be connected permanently to the Internet to work? *
First 10 Elements must be connected permanently to the Internet to work?
N ° but there are a number of features that will be beneficial to have an internet connection.
-
Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect. What should I do? I have new Id and worked, but not with my phone.
I live in Slovakia and I bought this iphone in Florida USA
Thank you, Maria Nagy
Any ideas?
-
I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!
There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.
1. download the file of configuration Flash from here:
Adobe Flash - Plugin version.
Save it to your desktop.2. close Firefox using file > exit
Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
{XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}3. then run the Flash configuration from your desktop file.
4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/
- On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).
See this:
http://vistasupport.MVPs.org/run_as_administrator.htm -
When I try to buy a book, it seems it download but does not work. If I am able to get a sample & try to buy the sample goes far & no new book. There are funds in my account iTunes Help!
Mine just did the same thing. I've even went and was sold again in case I did something wrong the first time. Still no book! I had to happen a few weeks ago, but when I closed iBooks and reopened, the book was there. This time that didn't happen. I prefer to read on the iBook, but I'm not if my books download
-
My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!
Hi Kareyfabela,
For this kind of problem, I strongly recommended opening a pension with Apple iPad case will probably require inspection by an Apple engineer. You can open a file on this site: https://www.apple.com/support/contact/
I hope this helps!
Jonty
-
Try to synchronize a mobile laptop and it connects via bluetooth, but will not be synchronized
try to synchronize a mobile laptop and it connects via bluetooth but will not synchronize what I am doing wrong
Moved from feedbackOriginal title: device"You run a form any of sync on the PC software, usually supplied with the ' phone or available for download on the ' phone manufacturers site.
As you do not tell us that "phone and helps OS it runs there is little more we can give." -
Update KB937287 keep apearing that the only update, tried to install a lot of times, but does not work, tried it with the standalone version and it keeps apearing, when I install it does not display an error message, just say that again was successful but when I try to look for more updated it apears again.
Hi mayortom,
Thank you for visiting the Microsoft answers Forum.
You can follow the steps outlined in the article below:
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339/I hope that helps!
Thank you and best regards,
Abdelouahab Microsoft responds to the technical support engineer -
How to find on which device connected to my system does not work?
I have XP Professional. Cannot start Windows Driver Foundation-User Mode Driver Framework(Manages user-mode driver host processes.) In the window 'services.msc' and try to start Windows Driver Foundation, I get the message: "error 31 - failed to start service. A device attached to the system does not work. "Question: how to find on which device connected to my system does not work?
1. click on start and then click Run.
2 type devmgmt.msc in the run box and press ENTER. This will open your device manager.
3. in the Device Manager window, click view, and then click Show hidden devices
4. develop options in your device manager and see if there are any device with a yellow exclamation point or something that is rare. If you find one, you can uninstall and reinstall the driver for this device, as long as you have the installation for device drivers files.I hope that helps!
-
I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:
LIFT, DRAG, THRUST and GRAVITY
If I run it on a machine with Win 7 there is no problem.
Richard Grosser
Hi Richard c. Grosser,.
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.
http://social.expression.Microsoft.com/forums/en-us/categories
-
Tax Turbo installed but does not work on Windows Vista
Tax Turbo installed but does not work. He says"this file does not have a program associated with it for performing this action. I don't know what the problem is. Exchanged the software still does not work.
Sometimes, says "Application not found" program seemed to install and icon is on the screen, just at the moment where I got to run the program, it does not work and says it's "shutting down". Any help?
Have you ever successfully run this program on your machine? So the system restore helps you, if if he was running very recently.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212/#appliesToWhich edition we talk to TurbTax, anything earlier than 2006 may not be not fully compatible with Vista? 64-bit versions may not be compatible at all?
Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?
The program will run in Mode safe?
Vista advanced boot options
http://Techblissonline.com/Vista-advanced-boot-options/How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135Problems with the launch of other programs via shortcuts on your desktop?
Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.
-
Microsoft fixit downloads but will not work
Can help any body patch Microsoft it load, accept the license agreement, but will not work
Hello
I am glad that you posted the question in the Microsoft Community.
1 when was the last time you were able to run the FIXIT?
2. you have any anti-virus installed on the computer program?
3. do you receive any error messages?
The computer has other problems in addition to not be able to run Microsoft FIXITs?
If the problem is related only to not be able to run FixIt, then you can contact the support team Microsoft FIXIT.
Hope this helps and let us know if you need more assistance. We will be happy to help you.
Maybe you are looking for
-
Hello dear, I need your help. I did yesterday an update to new IOS - now all the photos from iphoto to my MacBook are suddenly also on my iphone5S - how to delete photos on my phone without deleting on the macbook? They are very old photo from my chi
-
I'm under win 7 and invited this am to install 3 updates. Security for microsoft office system - KB976321 update will not install. Have tried several times but without success. Please notify.
-
How to install High Definition Audio Driver of package - KB835221
I am not able to install High Definition Audio Driver package - KB835221 anyone know why I can't, or how to install this? I was removing a program from Windows XP Media Center and noticed that it was no longer installed.
-
Reinstalled Windows - receive the key already in use
I reinstalled Windows and I did a backup of the System State and I put in a new controller raid, new hard drives, re-installed Windows 7 Ultimate, I even have the box now with the CoA, etc., and when I go to activate, it is for me (cannot activate on
-
Meaning of ' n3, n4 ' in the script of edge fonts
Recently, I designed a website and used open without police, I liked then used in conjunction with a second site too. But the second time of the police was different.I compared the different bits of code and discovered that the first has:" < script s